Upgrade Doxygen configuration files for Doxygen 1.8.1, fix broken stylesheet and footer HTML, add explicit spacing into documentation code fragments to prevent Doxygen from removing empty lines in the output.

5 files changed, 23 insertions, 23 deletions

diff --git a/LUFA/Drivers/Board/Buttons.h b/LUFA/Drivers/Board/Buttons.h
index c3d6c0d00..1b70a6bd5 100644
--- a/LUFA/Drivers/Board/Buttons.h
+++ b/LUFA/Drivers/Board/Buttons.h
@@ -68,13 +68,13 @@
  *  \code
  *      // Initialize the button driver before first use
  *      Buttons_Init();
- *
+ *      
  *      printf("Waiting for button press...\r\n");
- *
+ *      
  *      // Loop until a board button has been pressed
  *      uint8_t ButtonPress;
  *      while (!(ButtonPress = Buttons_GetStatus())) {};
- *
+ *      
  *      // Display which button was pressed (assuming two board buttons)
  *      printf("Button pressed: %s\r\n", (ButtonPress == BUTTONS_BUTTON1) ? "Button 1" : "Button 2");
  *  \endcode
diff --git a/LUFA/Drivers/Board/Dataflash.h b/LUFA/Drivers/Board/Dataflash.h
index a5ae29dc8..c9f66054b 100644
--- a/LUFA/Drivers/Board/Dataflash.h
+++ b/LUFA/Drivers/Board/Dataflash.h
@@ -70,44 +70,44 @@
  *      SPI_Init(SPI_SPEED_FCPU_DIV_2 | SPI_ORDER_MSB_FIRST | SPI_SCK_LEAD_FALLING |
  *               SPI_SAMPLE_TRAILING | SPI_MODE_MASTER);
  *      Dataflash_Init();
- *
+ *      
  *      uint8_t WriteBuffer[DATAFLASH_PAGE_SIZE];
  *      uint8_t ReadBuffer[DATAFLASH_PAGE_SIZE];
- *
+ *      
  *      // Fill page write buffer with a repeating pattern
  *      for (uint16_t i = 0; i < DATAFLASH_PAGE_SIZE; i++)
  *        WriteBuffer[i] = (i & 0xFF);
- *
+ *      
  *      // Must select the chip of interest first before operating on it
  *      Dataflash_SelectChip(DATAFLASH_CHIP1);
- *
+ *      
  *      // Write to the Dataflash's first internal memory buffer
  *      printf("Writing data to first dataflash buffer:\r\n");
  *      Dataflash_SendByte(DF_CMD_BUFF1WRITE);
  *      Dataflash_SendAddressBytes(0, 0);
- *
+ *      
  *      for (uint16_t i = 0; i < DATAFLASH_PAGE_SIZE; i++)
  *        Dataflash_SendByte(WriteBuffer[i]);
- *
+ *      
  *      // Commit the Dataflash's first memory buffer to the non-volatile FLASH memory
  *      printf("Committing page to non-volatile memory page index 5:\r\n");
  *      Dataflash_SendByte(DF_CMD_BUFF1TOMAINMEMWITHERASE);
  *      Dataflash_SendAddressBytes(5, 0);
  *      Dataflash_WaitWhileBusy();
- *
+ *      
  *      // Read the page from non-volatile FLASH memory into the Dataflash's second memory buffer
  *      printf("Reading data into second dataflash buffer:\r\n");
  *      Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF2);
  *      Dataflash_SendAddressBytes(5, 0);
  *      Dataflash_WaitWhileBusy();
- *
+ *      
  *      // Read the Dataflash's second internal memory buffer
  *      Dataflash_SendByte(DF_CMD_BUFF2READ);
  *      Dataflash_SendAddressBytes(0, 0);
- *
+ *      
  *      for (uint16_t i = 0; i < DATAFLASH_PAGE_SIZE; i++)
  *        ReadBuffer[i] = Dataflash_ReceiveByte();
- *
+ *      
  *      // Deselect the chip after use
  *      Dataflash_DeselectChip();
  *  \endcode
diff --git a/LUFA/Drivers/Board/Joystick.h b/LUFA/Drivers/Board/Joystick.h
index 0a1f9fa7a..63d28e837 100644
--- a/LUFA/Drivers/Board/Joystick.h
+++ b/LUFA/Drivers/Board/Joystick.h
@@ -67,22 +67,22 @@
  *  \code
  *      // Initialize the board Joystick driver before first use
  *      Joystick_Init();
- *
+ *      
  *      printf("Waiting for joystick movement...\r\n");
- *
+ *      
  *      // Loop until a the joystick has been moved
  *      uint8_t JoystickMovement;
  *      while (!(JoystickMovement = Joystick_GetStatus())) {};
- *
+ *      
  *      // Display which direction the joystick was moved in
  *      printf("Joystick moved:\r\n");
- *
+ *      
  *      if (JoystickMovement & (JOY_UP | JOY_DOWN))
  *        printf("%s ", (JoystickMovement & JOY_UP) ? "Up" : "Down");
- *
+ *      
  *      if (JoystickMovement & (JOY_LEFT | JOY_RIGHT))
  *        printf("%s ", (JoystickMovement & JOY_LEFT) ? "Left" : "Right");
- *
+ *      
  *      if (JoystickMovement & JOY_PRESS)
  *        printf("Pressed");
  *  \endcode
diff --git a/LUFA/Drivers/Board/LEDs.h b/LUFA/Drivers/Board/LEDs.h
index f6f9d82ff..97cb81a50 100644
--- a/LUFA/Drivers/Board/LEDs.h
+++ b/LUFA/Drivers/Board/LEDs.h
@@ -76,7 +76,7 @@
  *  \code
  *      // Initialize the board LED driver before first use
  *      LEDs_Init();
- *
+ *      
  *      // Turn on each of the four LEDs in turn
  *      LEDs_SetAllLEDs(LEDS_LED1);
  *      Delay_MS(500);
@@ -86,11 +86,11 @@
  *      Delay_MS(500);
  *      LEDs_SetAllLEDs(LEDS_LED4);
  *      Delay_MS(500);
- *
+ *      
  *      // Turn on all LEDs
  *      LEDs_SetAllLEDs(LEDS_ALL_LEDS);
  *      Delay_MS(1000);
- *
+ *      
  *      // Turn on LED 1, turn off LED 2, leaving LEDs 3 and 4 in their current state
  *      LEDs_ChangeLEDs((LEDS_LED1 | LEDS_LED2), LEDS_LED1);
  *  \endcode
diff --git a/LUFA/Drivers/Board/Temperature.h b/LUFA/Drivers/Board/Temperature.h
index ef967967b..54ca957a6 100644
--- a/LUFA/Drivers/Board/Temperature.h
+++ b/LUFA/Drivers/Board/Temperature.h
@@ -56,7 +56,7 @@
  *      // Initialize the ADC and board temperature sensor drivers before first use
  *      ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_128);
  *      Temperature_Init();
- *
+ *      
  *      // Display converted temperature in degrees Celsius
  *      printf("Current Temperature: %d Degrees\r\n", Temperature_GetTemperature());
  *  \endcode