diff options
author | Dean Camera <dean@fourwalledcubicle.com> | 2011-01-13 22:56:49 +0000 |
---|---|---|
committer | Dean Camera <dean@fourwalledcubicle.com> | 2011-01-13 22:56:49 +0000 |
commit | 70d55f6e0ca1f262bd8811ad8d4149e33125819a (patch) | |
tree | 5e618c7cc5bfc8ee4f410c44578d8704bfe72b0a /LUFA/Drivers/Peripheral/AVRU4U6U7 | |
parent | 9c7594e7db5b06b2703a9975f2b250056ee0c212 (diff) | |
download | lufa-70d55f6e0ca1f262bd8811ad8d4149e33125819a.tar.gz lufa-70d55f6e0ca1f262bd8811ad8d4149e33125819a.tar.bz2 lufa-70d55f6e0ca1f262bd8811ad8d4149e33125819a.zip |
Added new high level TWI packet read/write commands, altered behaviour of the TWI_StartTransmission() function.
Spell check source code files.
Diffstat (limited to 'LUFA/Drivers/Peripheral/AVRU4U6U7')
-rw-r--r-- | LUFA/Drivers/Peripheral/AVRU4U6U7/TWI.h | 115 |
1 files changed, 98 insertions, 17 deletions
diff --git a/LUFA/Drivers/Peripheral/AVRU4U6U7/TWI.h b/LUFA/Drivers/Peripheral/AVRU4U6U7/TWI.h index 2408ad15f..499fc4d99 100644 --- a/LUFA/Drivers/Peripheral/AVRU4U6U7/TWI.h +++ b/LUFA/Drivers/Peripheral/AVRU4U6U7/TWI.h @@ -49,13 +49,16 @@ * The following snippet is an example of how this module may be used within a typical * application. * + * <b>Low Level API Example:</b> * \code * // Initialise the TWI driver before first use * TWI_Init(); * - * // Start a write session to device at address 0xA0 with a 10ms timeout + * // Start a write session to device at device address 0xA0, internal address 0xDC with a 10ms timeout * if (TWI_StartTransmission(0xA0 | TWI_ADDRESS_WRITE, 10)) * { + * TWI_SendByte(0xDC); + * * TWI_SendByte(0x01); * TWI_SendByte(0x02); * TWI_SendByte(0x03); @@ -64,21 +67,47 @@ * TWI_StopTransmission(); * } * - * // Start a read session to device at address 0xA0 with a 10ms timeout - * if (TWI_StartTransmission(0xA0 | TWI_ADDRESS_READ, 10)) + * // Start a read session to device at address 0xA0, internal address 0xDC with a 10ms timeout + * if (TWI_StartTransmission(0xA0 | TWI_ADDRESS_WRITE, 10)) * { - * uint8_t Byte1, Byte2, Byte3; + * TWI_SendByte(0xDC); + * TWI_StopTransmission(); * - * // Read three bytes, acknowledge after the third byte is received - * TWI_ReceiveByte(&Byte1, false); - * TWI_ReceiveByte(&Byte2, false); - * TWI_ReceiveByte(&Byte3, true); + * if (TWI_StartTransmission(0xA0 | TWI_ADDRESS_READ, 10)) + * { + * uint8_t Byte1, Byte2, Byte3; * - * // Must stop transmission afterwards to release the bus - * TWI_StopTransmission(); + * // Read three bytes, acknowledge after the third byte is received + * TWI_ReceiveByte(&Byte1, false); + * TWI_ReceiveByte(&Byte2, false); + * TWI_ReceiveByte(&Byte3, true); + * + * // Must stop transmission afterwards to release the bus + * TWI_StopTransmission(); + * } * } * \endcode * + * <b>High Level API Example:</b> + * \code + * // Initialise the TWI driver before first use + * TWI_Init(); + * + * // Start a write session to device at device address 0xA0, internal address 0xDC with a 10ms timeout + * uint8_t InternalWriteAddress = 0xDC; + * uint8_t WritePacket[3] = {0x01, 0x02, 0x03}; + * + * TWI_WritePacket(0xA0, 10, &InternalWriteAddress, sizeof(InternalWriteAddress), + * &WritePacket, sizeof(WritePacket); + * + * // Start a read session to device at address 0xA0, internal address 0xDC with a 10ms timeout + * uint8_t InternalReadAddress = 0xDC; + * uint8_t ReadPacket[3]; + * + * TWI_ReadPacket(0xA0, 10, &InternalReadAddress, sizeof(InternalReadAddress), + * &ReadPacket, sizeof(ReadPacket); + * \endcode + * * @{ */ @@ -90,6 +119,7 @@ #include <avr/io.h> #include <stdbool.h> + #include <stdio.h> #include <util/twi.h> #include <util/delay.h> @@ -108,12 +138,29 @@ /** TWI slave device address mask for a read session. Mask with a slave device base address to obtain * the correct TWI bus address for the slave device when reading data from it. */ - #define TWI_ADDRESS_READ 0x00 + #define TWI_ADDRESS_READ 0x00 /** TWI slave device address mask for a write session. Mask with a slave device base address to obtain * the correct TWI bus address for the slave device when writing data to it. */ - #define TWI_ADDRESS_WRITE 0x01 + #define TWI_ADDRESS_WRITE 0x01 + + /** Mask to retrieve the base address for a TWI device, which can then be ORed with \ref TWI_ADDRESS_READ + * or \ref TWI_ADDRESS_WRITE to obtain the device's read and write address respectively. + */ + #define TWI_DEVICE_ADDRESS_MASK 0xFE + + /* Enums: */ + /** Enum for the possible return codes of the TWI transfer start routine and other dependant TWI functions. */ + enum TWI_ErrorCodes_t + { + TWI_ERROR_NoError = 0, /**< Indicates that the command completed sucessfully. */ + TWI_ERROR_BusFault = 1, /**< A TWI bus fault occurred while attempting to capture the bus. */ + TWI_ERROR_BusCaptureTimeout = 2, /**< A timeout occurred whilst waiting for the bus to be ready. */ + TWI_ERROR_SlaveResponseTimeout = 3, /**< No ACK received at the nominated slave address within the timeout period. */ + TWI_ERROR_SlaveNotReady = 4, /**< Slave NAKed the TWI bus START condition. */ + TWI_ERROR_SlaveNAK = 5, /**< Slave NAKed whilst attempting to send data to the device. */ + }; /* Inline Functions: */ /** Initialises the TWI hardware into master mode, ready for data transmission and reception. This must be @@ -163,8 +210,8 @@ * * \return Boolean \c true if the byte reception successfully completed, \c false otherwise */ - static inline bool TWI_ReceiveByte(uint8_t* const Byte, - const bool LastByte) + static inline uint8_t TWI_ReceiveByte(uint8_t* const Byte, + const bool LastByte) { uint8_t TWCRMask = ((1 << TWINT) | (1 << TWEN)); @@ -184,10 +231,44 @@ * \param[in] SlaveAddress Address of the slave TWI device to communicate with * \param[in] TimeoutMS Timeout period within which the slave must respond, in milliseconds * - * \return Boolean \c true if the device is ready for data, \c false otherwise + * \return A value from the \ref TWI_ErrorCodes_t enum + */ + uint8_t TWI_StartTransmission(const uint8_t SlaveAddress, + const uint8_t TimeoutMS); + + /** High level function to perform a complete packet transfer over the TWI bus to the specified + * device. + * + * \param[in] SlaveAddress Base address of the TWI slave device to communicate with + * \param[in] TimeoutMS Timeout for bus capture and slave START ACK, in milliseconds + * \param[in] InternalAddress Pointer to a location where the internal slave read start address is stored + * \param[in] InternalAddressLen Size of the internal device address, in bytes + * \param[in] Buffer Pointer to a buffer where the read packet data is to be stored + * \param[in] Length Size of the packet to read, in bytes + */ + uint8_t TWI_ReadPacket(const uint8_t SlaveAddress, + const uint8_t TimeoutMS, + const uint8_t* InternalAddress, + uint8_t InternalAddressLen, + uint8_t* Buffer, + uint8_t Length); + + /** High level function to perform a complete packet transfer over the TWI bus from the specified + * device. + * + * \param[in] SlaveAddress Base address of the TWI slave device to communicate with + * \param[in] TimeoutMS Timeout for bus capture and slave START ACK, in milliseconds + * \param[in] InternalAddress Pointer to a location where the internal slave write start address is stored + * \param[in] InternalAddressLen Size of the internal device address, in bytes + * \param[in] Buffer Pointer to a buffer where the packet data to send is stored + * \param[in] Length Size of the packet to send, in bytes */ - bool TWI_StartTransmission(const uint8_t SlaveAddress, - const uint8_t TimeoutMS); + uint8_t TWI_WritePacket(const uint8_t SlaveAddress, + const uint8_t TimeoutMS, + const uint8_t* InternalAddress, + uint8_t InternalAddressLen, + const uint8_t* Buffer, + uint8_t Length); /* Disable C linkage for C++ Compilers: */ #if defined(__cplusplus) |