Minor documentation improvements.

2 files changed, 16 insertions, 15 deletions

diff --git a/LUFA/Drivers/Peripheral/XMEGA/SPI_XMEGA.h b/LUFA/Drivers/Peripheral/XMEGA/SPI_XMEGA.h
index 1d28d309d..dac684f44 100644
--- a/LUFA/Drivers/Peripheral/XMEGA/SPI_XMEGA.h
+++ b/LUFA/Drivers/Peripheral/XMEGA/SPI_XMEGA.h
@@ -159,9 +159,9 @@
 			/** Initializes the SPI subsystem, ready for transfers. Must be called before calling any other
 			 *  SPI routines.
 			 *
-			 *  \param[in, out] SPI         Pointer to the base of the SPI peripheral within the device.
-			 *  \param[in]      SPIOptions  SPI Options, a mask consisting of one of each of the \c SPI_SPEED_*,
-			 *                         \c SPI_SCK_*, \c SPI_SAMPLE_*, \c SPI_ORDER_* and \c SPI_MODE_* masks.
+			 *  \param[in,out] SPI         Pointer to the base of the SPI peripheral within the device.
+			 *  \param[in]     SPIOptions  SPI Options, a mask consisting of one of each of the \c SPI_SPEED_*,
+			 *                             \c SPI_SCK_*, \c SPI_SAMPLE_*, \c SPI_ORDER_* and \c SPI_MODE_* masks.
 			 */
 			static inline void SPI_Init(SPI_t* const SPI,
 			                            const uint8_t SPIOptions)
@@ -171,7 +171,7 @@
 
 			/** Turns off the SPI driver, disabling and returning used hardware to their default configuration.
 			 *
-			 *  \param[in, out] SPI   Pointer to the base of the SPI peripheral within the device.
+			 *  \param[in,out] SPI   Pointer to the base of the SPI peripheral within the device.
 			 */
 			static inline void SPI_Disable(SPI_t* const SPI)
 			{
@@ -180,7 +180,7 @@
 
 			/** Retrieves the currently selected SPI mode, once the SPI interface has been configured.
 			 *
-			 *  \param[in, out] SPI  Pointer to the base of the SPI peripheral within the device.
+			 *  \param[in,out] SPI  Pointer to the base of the SPI peripheral within the device.
 			 *
 			 *  \return \ref SPI_MODE_MASTER if the interface is currently in SPI Master mode, \ref SPI_MODE_SLAVE otherwise
 			 */
@@ -192,8 +192,8 @@
 
 			/** Sends and receives a byte through the SPI interface, blocking until the transfer is complete.
 			 *
-			 *  \param[in, out] SPI   Pointer to the base of the SPI peripheral within the device.
-			 *  \param[in]      Byte  Byte to send through the SPI interface.
+			 *  \param[in,out] SPI   Pointer to the base of the SPI peripheral within the device.
+			 *  \param[in]     Byte  Byte to send through the SPI interface.
 			 *
 			 *  \return Response byte from the attached SPI device.
 			 */
@@ -210,8 +210,8 @@
 			/** Sends a byte through the SPI interface, blocking until the transfer is complete. The response
 			 *  byte sent to from the attached SPI device is ignored.
 			 *
-			 *  \param[in, out] SPI   Pointer to the base of the SPI peripheral within the device.
-			 *  \param[in]      Byte  Byte to send through the SPI interface.
+			 *  \param[in,out] SPI   Pointer to the base of the SPI peripheral within the device.
+			 *  \param[in]     Byte  Byte to send through the SPI interface.
 			 */
 			static inline void SPI_SendByte(SPI_t* const SPI,
 			                                const uint8_t Byte) ATTR_ALWAYS_INLINE;
@@ -225,7 +225,7 @@
 			/** Sends a dummy byte through the SPI interface, blocking until the transfer is complete. The response
 			 *  byte from the attached SPI device is returned.
 			 *
-			 *  \param[in, out] SPI  Pointer to the base of the SPI peripheral within the device.
+			 *  \param[in,out] SPI  Pointer to the base of the SPI peripheral within the device.
 			 *
 			 *  \return The response byte from the attached SPI device.
 			 */
diff --git a/LUFA/Drivers/Peripheral/XMEGA/Serial_XMEGA.h b/LUFA/Drivers/Peripheral/XMEGA/Serial_XMEGA.h
index 50352195c..8dd7844b5 100644
--- a/LUFA/Drivers/Peripheral/XMEGA/Serial_XMEGA.h
+++ b/LUFA/Drivers/Peripheral/XMEGA/Serial_XMEGA.h
@@ -43,7 +43,7 @@
  *  \section Sec_ModDescription Module Description
  *  On-chip serial USART driver for the XMEGA AVR microcontrollers.
  *
- *  \note This file should not be included directly. It is automatically included as needed by the ADC driver
+ *  \note This file should not be included directly. It is automatically included as needed by the USART driver
  *        dispatch header located in LUFA/Drivers/Peripheral/Serial.h.
  *
  *  \section Sec_ExampleUsage Example Usage
@@ -52,13 +52,13 @@
  *
  *  \code
  *      // Initialize the serial USART driver before first use, with 9600 baud (and no double-speed mode)
- *      Serial_Init(9600, false);
+ *      Serial_Init(&USARTD, 9600, false);
  *
  *      // Send a string through the USART
- *      Serial_TxString("Test String\r\n");
+ *      Serial_TxString(&USARTD, "Test String\r\n");
  *
  *      // Receive a byte through the USART
- *      uint8_t DataByte = Serial_RxByte();
+ *      uint8_t DataByte = Serial_RxByte(&USARTD);
  *  \endcode
  *
  *  @{
@@ -153,7 +153,7 @@
 			                               const uint32_t BaudRate,
 			                               const bool DoubleSpeed)
 			{
-				uint32_t BaudValue = (DoubleSpeed ? SERIAL_2X_UBBRVAL(BaudRate) : SERIAL_UBBRVAL(BaudRate));
+				uint16_t BaudValue = (DoubleSpeed ? SERIAL_2X_UBBRVAL(BaudRate) : SERIAL_UBBRVAL(BaudRate));
 
 				USART->BAUDCTRLB = (BaudValue >> 8);
 				USART->BAUDCTRLA = (BaudValue & 0xFF);
@@ -263,6 +263,7 @@
 				if (!(Serial_IsCharReceived(USART)))
 				  return -1;
 
+				USART->STATUS = USART_RXCIF_bm;
 				return USART->DATA;
 			}