Add svn:eol-style property to source files, so that the line endings are correctly converted to the target system's native end of line style.

1 files changed, 362 insertions, 362 deletions

diff --git a/LUFA/Drivers/USB/HighLevel/Events.h b/LUFA/Drivers/USB/HighLevel/Events.h
index 8daa8ea2b..edc7a8b36 100644
--- a/LUFA/Drivers/USB/HighLevel/Events.h
+++ b/LUFA/Drivers/USB/HighLevel/Events.h
@@ -1,362 +1,362 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2010.

-              

-  dean [at] fourwalledcubicle [dot] com

-      www.fourwalledcubicle.com

-*/

-

-/*

-  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this 

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in 

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting 

-  documentation, and that the name of the author not be used in 

-  advertising or publicity pertaining to distribution of the 

-  software without specific, written prior permission.

-

-  The author disclaim all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-/** \file

- *  \brief USB controller events manager.

- *

- *  This file contains macros and functions relating to the management of library events, which are small

- *  pieces of code similar to ISRs which are run when a given condition is met. Each event can be fired from

- *  multiple places in the user or library code, which may or may not be inside an ISR, thus each handler

- *  should be written to be as small and fast as possible to prevent possible problems.

- *

- *  Events can be hooked by the user application by declaring a handler function with the same name and parameters

- *  listed here. If an event with no user-associated handler is fired within the library, it by default maps to an

- *  internal empty stub function.

- *

- *  Each event must only have one associated event handler, but can be raised by multiple sources by calling the

- *  event handler function (with any required event parameters).

- *

- *  \note This file should not be included directly. It is automatically included as needed by the USB driver

- *        dispatch header located in LUFA/Drivers/USB/USB.h.

- */

-

-/** \ingroup Group_USB

- *  @defgroup Group_Events USB Events

- *

- *  This module contains macros and functions relating to the management of library events, which are small

- *  pieces of code similar to ISRs which are run when a given condition is met. Each event can be fired from

- *  multiple places in the user or library code, which may or may not be inside an ISR, thus each handler

- *  should be written to be as small and fast as possible to prevent possible problems.

- *

- *  Events can be hooked by the user application by declaring a handler function with the same name and parameters

- *  listed here. If an event with no user-associated handler is fired within the library, it by default maps to an

- *  internal empty stub function.

- *

- *  Each event must only have one associated event handler, but can be raised by multiple sources by calling the

- *  event handler function (with any required event parameters).

- *

- *  @{

- */

- 

-#ifndef __USBEVENTS_H__

-#define __USBEVENTS_H__

-

-	/* Includes: */

-		#include <avr/io.h>

-		

-		#include "../../../Common/Common.h"

-		#include "USBMode.h"

-

-	/* Enable C linkage for C++ Compilers: */

-		#if defined(__cplusplus)

-			extern "C" {

-		#endif

-

-	/* Preprocessor Checks: */

-		#if !defined(__INCLUDE_FROM_USB_DRIVER)

-			#error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.

-		#endif

-		

-	/* Public Interface - May be used in end-application: */			

-		/* Pseudo-Functions for Doxygen: */

-		#if !defined(__INCLUDE_FROM_EVENTS_C) || defined(__DOXYGEN__)

-			/** Event for USB stack initialization failure. This event fires when the USB interface fails to

-			 *  initialize correctly due to a hardware or software fault.

-			 *

-			 *  \note This event only exists on USB AVR models which support dual role modes.

-			 *

-			 *  \param[in] ErrorCode  Error code indicating the failure reason, a value in \ref USB_InitErrorCodes_t

-			 */

-			void EVENT_USB_InitFailure(const uint8_t ErrorCode);

-

-			/** Event for USB mode pin level change. This event fires when the USB interface is set to dual role

-			 *  mode, and the UID pin level has changed to indicate a new mode (device or host). This event fires

-			 *  before the mode is switched to the newly indicated mode but after the \ref EVENT_USB_Device_Disconnect

-			 *  event has fired (if connected before the role change).

-			 *

-			 *  \note This event only exists on USB AVR models which support dual role modes.

-			 *        \n\n

-			 *

-			 *  \note This event does not exist if the USB_DEVICE_ONLY or USB_HOST_ONLY tokens have been supplied

-			 *        to the compiler (see \ref Group_USBManagement documentation).

-			 */

-			void EVENT_USB_UIDChange(void);

-

-			/** Event for USB host error. This event fires when a hardware fault has occurred whilst the USB

-			 *  interface is in host mode.

-			 *

-			 *  \param[in] ErrorCode  Error code indicating the failure reason, a value in \ref USB_Host_ErrorCodes_t

-			 *

-			 *  \note This event only exists on USB AVR models which supports host mode.

-			 *        \n\n

-			 *

-			 *  \note This event does not exist if the USB_DEVICE_ONLY token is supplied to the compiler (see

-			 *        \ref Group_USBManagement documentation).

-			 */

-			void EVENT_USB_Host_HostError(const uint8_t ErrorCode);

-			

-			/** Event for USB device attachment. This event fires when a the USB interface is in host mode, and

-			 *  a USB device has been connected to the USB interface. This is interrupt driven, thus fires before

-			 *  the standard \ref EVENT_USB_Device_Connect() event and so can be used to programmatically start the USB

-			 *  management task to reduce CPU consumption.

-			 *

-			 *  \note This event only exists on USB AVR models which supports host mode.

-			 *        \n\n

-			 *

-			 *  \note This event does not exist if the USB_DEVICE_ONLY token is supplied to the compiler (see

-			 *        \ref Group_USBManagement documentation).

-			 *

-			 *  \see \ref USB_USBTask() for more information on the USB management task and reducing CPU usage.

-			 */

-			void EVENT_USB_Host_DeviceAttached(void);

-

-			/** Event for USB device removal. This event fires when a the USB interface is in host mode, and

-			 *  a USB device has been removed the USB interface whether or not it has been enumerated. This

-			 *  can be used to programmatically stop the USB management task to reduce CPU consumption.

-			 *

-			 *  \note This event only exists on USB AVR models which supports host mode.

-			 *        \n\n

-			 *

-			 *  \note This event does not exist if the USB_DEVICE_ONLY token is supplied to the compiler (see

-			 *        \ref Group_USBManagement documentation).

-			 *

-			 *  \see \ref USB_USBTask() for more information on the USB management task and reducing CPU usage.

-			 */

-			void EVENT_USB_Host_DeviceUnattached(void);

-			

-			/** Event for USB device enumeration failure. This event fires when a the USB interface is

-			 *  in host mode, and an attached USB device has failed to enumerate completely.

-			 *

-			 *  \param[in] ErrorCode  Error code indicating the failure reason, a value in 

-			 *                        \ref USB_Host_EnumerationErrorCodes_t

-			 *

-			 *  \param[in] SubErrorCode  Sub error code indicating the reason for failure - for example, if the

-			 *                           ErrorCode parameter indicates a control error, this will give the error

-			 *                           code returned by the \ref USB_Host_SendControlRequest() function.

-			 *

-			 *  \note This event only exists on USB AVR models which supports host mode.

-			 *        \n\n

-			 *

-			 *  \note This event does not exist if the USB_DEVICE_ONLY token is supplied to the compiler (see

-			 *        \ref Group_USBManagement documentation).

-			 */

-			void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode);

-

-			/** Event for USB device enumeration completion. This event fires when a the USB interface is

-			 *  in host mode and an attached USB device has been completely enumerated and is ready to be

-			 *  controlled by the user application.

-			 *

-			 *  This event is time-critical; exceeding OS-specific delays within this event handler (typically of around

-			 *  1 second) when a transaction is waiting to be processed by the device will prevent break communications

-			 *  and cause the host to reset the USB bus.

-			 */

-			void EVENT_USB_Host_DeviceEnumerationComplete(void);

-

-			/** Event for USB device connection. This event fires when the AVR in device mode and the device is connected

-			 *  to a host, beginning the enumeration process, measured by a rising level on the AVR's VBUS pin.

-			 *

-			 *  This event is time-critical; exceeding OS-specific delays within this event handler (typically of around

-			 *  two seconds) will prevent the device from enumerating correctly.

-			 *

-			 *  \note For the smaller series 2 USB AVRs with limited USB controllers, VBUS is not available to the USB controller.

-			 *        this means that the current connection state is derived from the bus suspension and wake up events by default,

-			 *        which is not always accurate (host may suspend the bus while still connected). If the actual connection state

-			 *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by

-			 *        passing the NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection

-			 *        and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually.

-			 *        \n\n

-			 *

-			 *  \note This event may fire multiple times during device enumeration on the series 2 USB AVRs with limited USB controllers

-			 *        if NO_LIMITED_CONTROLLER_CONNECT is not defined.

-			 *

-			 *  \see USBTask.h for more information on the USB management task and reducing CPU usage.

-			 */

-			void EVENT_USB_Device_Connect(void);

-

-			/** Event for USB device disconnection. This event fires when the AVR in device mode and the device is disconnected

-			 *  from a host, measured by a falling level on the AVR's VBUS pin.

-			 *

-			 *  \note For the smaller series 2 USB AVRs with limited USB controllers, VBUS is not available to the USB controller.

-			 *        this means that the current connection state is derived from the bus suspension and wake up events by default,

-			 *        which is not always accurate (host may suspend the bus while still connected). If the actual connection state

-			 *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by

-			 *        passing the NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection

-			 *        and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually.

-			 *        \n\n

-			 *

-			 *  \note This event may fire multiple times during device enumeration on the series 2 USB AVRs with limited USB controllers

-			 *        if NO_LIMITED_CONTROLLER_CONNECT is not defined.

-			 *

-			 *  \see USBTask.h for more information on the USB management task and reducing CPU usage.

-			 */

-			void EVENT_USB_Device_Disconnect(void);

-

-			/** Event for unhandled control requests. This event fires when a the USB host issues a control

-			 *  request to the control endpoint (address 0) that the library does not handle. This may either

-			 *  be a standard request that the library has no handler code for, or a class specific request

-			 *  issued to the device which must be handled appropriately.

-			 *

-			 *  This event is time-critical; each packet within the request transaction must be acknowledged or

-			 *  sent within 50ms or the host will abort the transfer.

-			 *

-			 *  The library interally handles all standard control requests with the exceptions of SYNC FRAME,

-			 *  SET DESCRIPTOR and SET INTERFACE. These and all other non-standard control requests will be left

-			 *  for the user to process via this event if desired. If not handled in the user application, requests

-			 *  are automatically STALLed.

-			 *

-			 *  \note This event does not exist if the USB_HOST_ONLY token is supplied to the compiler (see

-			 *        \ref Group_USBManagement documentation).

-			 *        \n\n

-			 *

-			 *  \note Requests should be handled in the same manner as described in the USB 2.0 Specification,

-			 *        or appropriate class specification. In all instances, the library has already read the

-			 *        request SETUP parameters into the \ref USB_ControlRequest structure which should then be used

-			 *        by the application to determine how to handle the issued request.

-			 */

-			void EVENT_USB_Device_UnhandledControlRequest(void);

-

-			/** Event for USB configuration number changed. This event fires when a the USB host changes the

-			 *  selected configuration number while in device mode. This event should be hooked in device

-			 *  applications to create the endpoints and configure the device for the selected configuration.

-			 *

-			 *  This event is time-critical; exceeding OS-specific delays within this event handler (typically of around

-			 *  one second) will prevent the device from enumerating correctly.

-			 *

-			 *  This event fires after the value of \ref USB_ConfigurationNumber has been changed.

-			 *

-			 *  \note This event does not exist if the USB_HOST_ONLY token is supplied to the compiler (see

-			 *        \ref Group_USBManagement documentation).

-			 */

-			void EVENT_USB_Device_ConfigurationChanged(void);

-

-			/** Event for USB suspend. This event fires when a the USB host suspends the device by halting its

-			 *  transmission of Start Of Frame pulses to the device. This is generally hooked in order to move

-			 *  the device over to a low power state until the host wakes up the device. If the USB interface is

-			 *  enumerated with the \ref USB_OPT_AUTO_PLL option set, the library will automatically suspend the

-			 *  USB PLL before the event is fired to save power.

-			 *

-			 *  \note This event does not exist if the USB_HOST_ONLY token is supplied to the compiler (see

-			 *        \ref Group_USBManagement documentation).

-			 *        \n\n

-			 *

-			 *  \note This event does not exist on the series 2 USB AVRs when the NO_LIMITED_CONTROLLER_CONNECT

-			 *        compile time token is not set - see \ref EVENT_USB_Device_Disconnect.

-			 *

-			 *  \see \ref EVENT_USB_Device_WakeUp() event for accompanying Wake Up event.

-			 */

-			void EVENT_USB_Device_Suspend(void);

-

-			/** Event for USB wake up. This event fires when a the USB interface is suspended while in device

-			 *  mode, and the host wakes up the device by supplying Start Of Frame pulses. This is generally

-			 *  hooked to pull the user application out of a low power state and back into normal operating

-			 *  mode. If the USB interface is enumerated with the \ref USB_OPT_AUTO_PLL option set, the library

-			 *  will automatically restart the USB PLL before the event is fired.

-			 *

-			 *  \note This event does not exist if the USB_HOST_ONLY token is supplied to the compiler (see

-			 *        \ref Group_USBManagement documentation).

-			 *        \n\n

-			 *

-			 *  \note This event does not exist on the series 2 USB AVRs when the NO_LIMITED_CONTROLLER_CONNECT

-			 *        compile time token is not set - see \ref EVENT_USB_Device_Connect.

-			 *

-			 *  \see \ref EVENT_USB_Device_Suspend() event for accompanying Suspend event.

-			 */

-			void EVENT_USB_Device_WakeUp(void);

-

-			/** Event for USB interface reset. This event fires when the USB interface is in device mode, and

-			 *  a the USB host requests that the device reset its interface. This event fires after the control

-			 *  endpoint has been automatically configured by the library.

-			 *

-			 *  This event is time-critical; exceeding OS-specific delays within this event handler (typically of around

-			 *  two seconds) will prevent the device from enumerating correctly.

-			 *

-			 *  \note This event does not exist if the USB_HOST_ONLY token is supplied to the compiler (see

-			 *        \ref Group_USBManagement documentation).

-			 */

-			void EVENT_USB_Device_Reset(void);

-

-			/** Event for USB Start Of Frame detection, when enabled. This event fires at the start of each USB

-			 *  frame, once per millisecond, and is synchronized to the USB bus. This can be used as an accurate

-			 *  millisecond timer source when the USB bus is enumerated in device mode to a USB host.

-			 *

-			 *  This event is time-critical; it is run once per millisecond and thus long handlers will significantly

-			 *  degrade device performance. This event should only be enabled when needed to reduce device wakeups.

-			 *

-			 *  \note This event is not normally active - it must be manually enabled and disabled via the

-			 *        \ref USB_Device_EnableSOFEvents() and \ref USB_Device_DisableSOFEvents() commands after enumeration.

-			 *        \n\n

-			 *

-			 *  \note This event does not exist if the USB_HOST_ONLY token is supplied to the compiler (see

-			 *        \ref Group_USBManagement documentation).

-			 */

-			void EVENT_USB_Device_StartOfFrame(void);

-		#endif

-		

-	/* Private Interface - For use in library only: */

-	#if !defined(__DOXYGEN__)

-		/* Function Prototypes: */

-			#if defined(__INCLUDE_FROM_EVENTS_C)

-				void USB_Event_Stub(void) ATTR_CONST;

-					

-				#if defined(USB_CAN_BE_BOTH)

-					void EVENT_USB_InitFailure(const uint8_t ErrorCode) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);

-					void EVENT_USB_UIDChange(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);

-				#endif

-				

-				#if defined(USB_CAN_BE_HOST)

-					void EVENT_USB_Host_HostError(const uint8_t ErrorCode) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);

-					void EVENT_USB_Host_DeviceAttached(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);

-					void EVENT_USB_Host_DeviceUnattached(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);

-					void EVENT_USB_Host_DeviceEnumerationComplete(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);

-					void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode)

-					                                       ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);

-				#endif

-

-				#if defined(USB_CAN_BE_DEVICE)

-					void EVENT_USB_Device_Connect(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);

-					void EVENT_USB_Device_Disconnect(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);

-					void EVENT_USB_Device_UnhandledControlRequest(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);

-					void EVENT_USB_Device_ConfigurationChanged(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);

-					void EVENT_USB_Device_Suspend(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);

-					void EVENT_USB_Device_WakeUp(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);

-					void EVENT_USB_Device_Reset(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);

-					void EVENT_USB_Device_StartOfFrame(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);

-				#endif

-			#endif

-	#endif

-

-	/* Disable C linkage for C++ Compilers: */

-		#if defined(__cplusplus)

-			}

-		#endif

-	

-#endif

-

-/** @} */

+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2010.
+              
+  dean [at] fourwalledcubicle [dot] com
+      www.fourwalledcubicle.com
+*/
+
+/*
+  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this 
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in 
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting 
+  documentation, and that the name of the author not be used in 
+  advertising or publicity pertaining to distribution of the 
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief USB controller events manager.
+ *
+ *  This file contains macros and functions relating to the management of library events, which are small
+ *  pieces of code similar to ISRs which are run when a given condition is met. Each event can be fired from
+ *  multiple places in the user or library code, which may or may not be inside an ISR, thus each handler
+ *  should be written to be as small and fast as possible to prevent possible problems.
+ *
+ *  Events can be hooked by the user application by declaring a handler function with the same name and parameters
+ *  listed here. If an event with no user-associated handler is fired within the library, it by default maps to an
+ *  internal empty stub function.
+ *
+ *  Each event must only have one associated event handler, but can be raised by multiple sources by calling the
+ *  event handler function (with any required event parameters).
+ *
+ *  \note This file should not be included directly. It is automatically included as needed by the USB driver
+ *        dispatch header located in LUFA/Drivers/USB/USB.h.
+ */
+
+/** \ingroup Group_USB
+ *  @defgroup Group_Events USB Events
+ *
+ *  This module contains macros and functions relating to the management of library events, which are small
+ *  pieces of code similar to ISRs which are run when a given condition is met. Each event can be fired from
+ *  multiple places in the user or library code, which may or may not be inside an ISR, thus each handler
+ *  should be written to be as small and fast as possible to prevent possible problems.
+ *
+ *  Events can be hooked by the user application by declaring a handler function with the same name and parameters
+ *  listed here. If an event with no user-associated handler is fired within the library, it by default maps to an
+ *  internal empty stub function.
+ *
+ *  Each event must only have one associated event handler, but can be raised by multiple sources by calling the
+ *  event handler function (with any required event parameters).
+ *
+ *  @{
+ */
+ 
+#ifndef __USBEVENTS_H__
+#define __USBEVENTS_H__
+
+	/* Includes: */
+		#include <avr/io.h>
+		
+		#include "../../../Common/Common.h"
+		#include "USBMode.h"
+
+	/* Enable C linkage for C++ Compilers: */
+		#if defined(__cplusplus)
+			extern "C" {
+		#endif
+
+	/* Preprocessor Checks: */
+		#if !defined(__INCLUDE_FROM_USB_DRIVER)
+			#error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
+		#endif
+		
+	/* Public Interface - May be used in end-application: */			
+		/* Pseudo-Functions for Doxygen: */
+		#if !defined(__INCLUDE_FROM_EVENTS_C) || defined(__DOXYGEN__)
+			/** Event for USB stack initialization failure. This event fires when the USB interface fails to
+			 *  initialize correctly due to a hardware or software fault.
+			 *
+			 *  \note This event only exists on USB AVR models which support dual role modes.
+			 *
+			 *  \param[in] ErrorCode  Error code indicating the failure reason, a value in \ref USB_InitErrorCodes_t
+			 */
+			void EVENT_USB_InitFailure(const uint8_t ErrorCode);
+
+			/** Event for USB mode pin level change. This event fires when the USB interface is set to dual role
+			 *  mode, and the UID pin level has changed to indicate a new mode (device or host). This event fires
+			 *  before the mode is switched to the newly indicated mode but after the \ref EVENT_USB_Device_Disconnect
+			 *  event has fired (if connected before the role change).
+			 *
+			 *  \note This event only exists on USB AVR models which support dual role modes.
+			 *        \n\n
+			 *
+			 *  \note This event does not exist if the USB_DEVICE_ONLY or USB_HOST_ONLY tokens have been supplied
+			 *        to the compiler (see \ref Group_USBManagement documentation).
+			 */
+			void EVENT_USB_UIDChange(void);
+
+			/** Event for USB host error. This event fires when a hardware fault has occurred whilst the USB
+			 *  interface is in host mode.
+			 *
+			 *  \param[in] ErrorCode  Error code indicating the failure reason, a value in \ref USB_Host_ErrorCodes_t
+			 *
+			 *  \note This event only exists on USB AVR models which supports host mode.
+			 *        \n\n
+			 *
+			 *  \note This event does not exist if the USB_DEVICE_ONLY token is supplied to the compiler (see
+			 *        \ref Group_USBManagement documentation).
+			 */
+			void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
+			
+			/** Event for USB device attachment. This event fires when a the USB interface is in host mode, and
+			 *  a USB device has been connected to the USB interface. This is interrupt driven, thus fires before
+			 *  the standard \ref EVENT_USB_Device_Connect() event and so can be used to programmatically start the USB
+			 *  management task to reduce CPU consumption.
+			 *
+			 *  \note This event only exists on USB AVR models which supports host mode.
+			 *        \n\n
+			 *
+			 *  \note This event does not exist if the USB_DEVICE_ONLY token is supplied to the compiler (see
+			 *        \ref Group_USBManagement documentation).
+			 *
+			 *  \see \ref USB_USBTask() for more information on the USB management task and reducing CPU usage.
+			 */
+			void EVENT_USB_Host_DeviceAttached(void);
+
+			/** Event for USB device removal. This event fires when a the USB interface is in host mode, and
+			 *  a USB device has been removed the USB interface whether or not it has been enumerated. This
+			 *  can be used to programmatically stop the USB management task to reduce CPU consumption.
+			 *
+			 *  \note This event only exists on USB AVR models which supports host mode.
+			 *        \n\n
+			 *
+			 *  \note This event does not exist if the USB_DEVICE_ONLY token is supplied to the compiler (see
+			 *        \ref Group_USBManagement documentation).
+			 *
+			 *  \see \ref USB_USBTask() for more information on the USB management task and reducing CPU usage.
+			 */
+			void EVENT_USB_Host_DeviceUnattached(void);
+			
+			/** Event for USB device enumeration failure. This event fires when a the USB interface is
+			 *  in host mode, and an attached USB device has failed to enumerate completely.
+			 *
+			 *  \param[in] ErrorCode  Error code indicating the failure reason, a value in 
+			 *                        \ref USB_Host_EnumerationErrorCodes_t
+			 *
+			 *  \param[in] SubErrorCode  Sub error code indicating the reason for failure - for example, if the
+			 *                           ErrorCode parameter indicates a control error, this will give the error
+			 *                           code returned by the \ref USB_Host_SendControlRequest() function.
+			 *
+			 *  \note This event only exists on USB AVR models which supports host mode.
+			 *        \n\n
+			 *
+			 *  \note This event does not exist if the USB_DEVICE_ONLY token is supplied to the compiler (see
+			 *        \ref Group_USBManagement documentation).
+			 */
+			void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode);
+
+			/** Event for USB device enumeration completion. This event fires when a the USB interface is
+			 *  in host mode and an attached USB device has been completely enumerated and is ready to be
+			 *  controlled by the user application.
+			 *
+			 *  This event is time-critical; exceeding OS-specific delays within this event handler (typically of around
+			 *  1 second) when a transaction is waiting to be processed by the device will prevent break communications
+			 *  and cause the host to reset the USB bus.
+			 */
+			void EVENT_USB_Host_DeviceEnumerationComplete(void);
+
+			/** Event for USB device connection. This event fires when the AVR in device mode and the device is connected
+			 *  to a host, beginning the enumeration process, measured by a rising level on the AVR's VBUS pin.
+			 *
+			 *  This event is time-critical; exceeding OS-specific delays within this event handler (typically of around
+			 *  two seconds) will prevent the device from enumerating correctly.
+			 *
+			 *  \note For the smaller series 2 USB AVRs with limited USB controllers, VBUS is not available to the USB controller.
+			 *        this means that the current connection state is derived from the bus suspension and wake up events by default,
+			 *        which is not always accurate (host may suspend the bus while still connected). If the actual connection state
+			 *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by
+			 *        passing the NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection
+			 *        and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually.
+			 *        \n\n
+			 *
+			 *  \note This event may fire multiple times during device enumeration on the series 2 USB AVRs with limited USB controllers
+			 *        if NO_LIMITED_CONTROLLER_CONNECT is not defined.
+			 *
+			 *  \see USBTask.h for more information on the USB management task and reducing CPU usage.
+			 */
+			void EVENT_USB_Device_Connect(void);
+
+			/** Event for USB device disconnection. This event fires when the AVR in device mode and the device is disconnected
+			 *  from a host, measured by a falling level on the AVR's VBUS pin.
+			 *
+			 *  \note For the smaller series 2 USB AVRs with limited USB controllers, VBUS is not available to the USB controller.
+			 *        this means that the current connection state is derived from the bus suspension and wake up events by default,
+			 *        which is not always accurate (host may suspend the bus while still connected). If the actual connection state
+			 *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by
+			 *        passing the NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection
+			 *        and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually.
+			 *        \n\n
+			 *
+			 *  \note This event may fire multiple times during device enumeration on the series 2 USB AVRs with limited USB controllers
+			 *        if NO_LIMITED_CONTROLLER_CONNECT is not defined.
+			 *
+			 *  \see USBTask.h for more information on the USB management task and reducing CPU usage.
+			 */
+			void EVENT_USB_Device_Disconnect(void);
+
+			/** Event for unhandled control requests. This event fires when a the USB host issues a control
+			 *  request to the control endpoint (address 0) that the library does not handle. This may either
+			 *  be a standard request that the library has no handler code for, or a class specific request
+			 *  issued to the device which must be handled appropriately.
+			 *
+			 *  This event is time-critical; each packet within the request transaction must be acknowledged or
+			 *  sent within 50ms or the host will abort the transfer.
+			 *
+			 *  The library interally handles all standard control requests with the exceptions of SYNC FRAME,
+			 *  SET DESCRIPTOR and SET INTERFACE. These and all other non-standard control requests will be left
+			 *  for the user to process via this event if desired. If not handled in the user application, requests
+			 *  are automatically STALLed.
+			 *
+			 *  \note This event does not exist if the USB_HOST_ONLY token is supplied to the compiler (see
+			 *        \ref Group_USBManagement documentation).
+			 *        \n\n
+			 *
+			 *  \note Requests should be handled in the same manner as described in the USB 2.0 Specification,
+			 *        or appropriate class specification. In all instances, the library has already read the
+			 *        request SETUP parameters into the \ref USB_ControlRequest structure which should then be used
+			 *        by the application to determine how to handle the issued request.
+			 */
+			void EVENT_USB_Device_UnhandledControlRequest(void);
+
+			/** Event for USB configuration number changed. This event fires when a the USB host changes the
+			 *  selected configuration number while in device mode. This event should be hooked in device
+			 *  applications to create the endpoints and configure the device for the selected configuration.
+			 *
+			 *  This event is time-critical; exceeding OS-specific delays within this event handler (typically of around
+			 *  one second) will prevent the device from enumerating correctly.
+			 *
+			 *  This event fires after the value of \ref USB_ConfigurationNumber has been changed.
+			 *
+			 *  \note This event does not exist if the USB_HOST_ONLY token is supplied to the compiler (see
+			 *        \ref Group_USBManagement documentation).
+			 */
+			void EVENT_USB_Device_ConfigurationChanged(void);
+
+			/** Event for USB suspend. This event fires when a the USB host suspends the device by halting its
+			 *  transmission of Start Of Frame pulses to the device. This is generally hooked in order to move
+			 *  the device over to a low power state until the host wakes up the device. If the USB interface is
+			 *  enumerated with the \ref USB_OPT_AUTO_PLL option set, the library will automatically suspend the
+			 *  USB PLL before the event is fired to save power.
+			 *
+			 *  \note This event does not exist if the USB_HOST_ONLY token is supplied to the compiler (see
+			 *        \ref Group_USBManagement documentation).
+			 *        \n\n
+			 *
+			 *  \note This event does not exist on the series 2 USB AVRs when the NO_LIMITED_CONTROLLER_CONNECT
+			 *        compile time token is not set - see \ref EVENT_USB_Device_Disconnect.
+			 *
+			 *  \see \ref EVENT_USB_Device_WakeUp() event for accompanying Wake Up event.
+			 */
+			void EVENT_USB_Device_Suspend(void);
+
+			/** Event for USB wake up. This event fires when a the USB interface is suspended while in device
+			 *  mode, and the host wakes up the device by supplying Start Of Frame pulses. This is generally
+			 *  hooked to pull the user application out of a low power state and back into normal operating
+			 *  mode. If the USB interface is enumerated with the \ref USB_OPT_AUTO_PLL option set, the library
+			 *  will automatically restart the USB PLL before the event is fired.
+			 *
+			 *  \note This event does not exist if the USB_HOST_ONLY token is supplied to the compiler (see
+			 *        \ref Group_USBManagement documentation).
+			 *        \n\n
+			 *
+			 *  \note This event does not exist on the series 2 USB AVRs when the NO_LIMITED_CONTROLLER_CONNECT
+			 *        compile time token is not set - see \ref EVENT_USB_Device_Connect.
+			 *
+			 *  \see \ref EVENT_USB_Device_Suspend() event for accompanying Suspend event.
+			 */
+			void EVENT_USB_Device_WakeUp(void);
+
+			/** Event for USB interface reset. This event fires when the USB interface is in device mode, and
+			 *  a the USB host requests that the device reset its interface. This event fires after the control
+			 *  endpoint has been automatically configured by the library.
+			 *
+			 *  This event is time-critical; exceeding OS-specific delays within this event handler (typically of around
+			 *  two seconds) will prevent the device from enumerating correctly.
+			 *
+			 *  \note This event does not exist if the USB_HOST_ONLY token is supplied to the compiler (see
+			 *        \ref Group_USBManagement documentation).
+			 */
+			void EVENT_USB_Device_Reset(void);
+
+			/** Event for USB Start Of Frame detection, when enabled. This event fires at the start of each USB
+			 *  frame, once per millisecond, and is synchronized to the USB bus. This can be used as an accurate
+			 *  millisecond timer source when the USB bus is enumerated in device mode to a USB host.
+			 *
+			 *  This event is time-critical; it is run once per millisecond and thus long handlers will significantly
+			 *  degrade device performance. This event should only be enabled when needed to reduce device wakeups.
+			 *
+			 *  \note This event is not normally active - it must be manually enabled and disabled via the
+			 *        \ref USB_Device_EnableSOFEvents() and \ref USB_Device_DisableSOFEvents() commands after enumeration.
+			 *        \n\n
+			 *
+			 *  \note This event does not exist if the USB_HOST_ONLY token is supplied to the compiler (see
+			 *        \ref Group_USBManagement documentation).
+			 */
+			void EVENT_USB_Device_StartOfFrame(void);
+		#endif
+		
+	/* Private Interface - For use in library only: */
+	#if !defined(__DOXYGEN__)
+		/* Function Prototypes: */
+			#if defined(__INCLUDE_FROM_EVENTS_C)
+				void USB_Event_Stub(void) ATTR_CONST;
+					
+				#if defined(USB_CAN_BE_BOTH)
+					void EVENT_USB_InitFailure(const uint8_t ErrorCode) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);
+					void EVENT_USB_UIDChange(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);
+				#endif
+				
+				#if defined(USB_CAN_BE_HOST)
+					void EVENT_USB_Host_HostError(const uint8_t ErrorCode) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);
+					void EVENT_USB_Host_DeviceAttached(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);
+					void EVENT_USB_Host_DeviceUnattached(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);
+					void EVENT_USB_Host_DeviceEnumerationComplete(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);
+					void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode)
+					                                       ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);
+				#endif
+
+				#if defined(USB_CAN_BE_DEVICE)
+					void EVENT_USB_Device_Connect(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);
+					void EVENT_USB_Device_Disconnect(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);
+					void EVENT_USB_Device_UnhandledControlRequest(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);
+					void EVENT_USB_Device_ConfigurationChanged(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);
+					void EVENT_USB_Device_Suspend(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);
+					void EVENT_USB_Device_WakeUp(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);
+					void EVENT_USB_Device_Reset(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);
+					void EVENT_USB_Device_StartOfFrame(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);
+				#endif
+			#endif
+	#endif
+
+	/* Disable C linkage for C++ Compilers: */
+		#if defined(__cplusplus)
+			}
+		#endif
+	
+#endif
+
+/** @} */