Add svn:eol-style property to source files, so that the line endings are correctly converted to the target system's native end of line style.

1 files changed, 137 insertions, 137 deletions

diff --git a/LUFA/Drivers/USB/HighLevel/USBMode.h b/LUFA/Drivers/USB/HighLevel/USBMode.h
index d894bbad7..1de2ef9bb 100644
--- a/LUFA/Drivers/USB/HighLevel/USBMode.h
+++ b/LUFA/Drivers/USB/HighLevel/USBMode.h
@@ -1,138 +1,138 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2010.

-              

-  dean [at] fourwalledcubicle [dot] com

-      www.fourwalledcubicle.com

-*/

-

-/*

-  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this 

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in 

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting 

-  documentation, and that the name of the author not be used in 

-  advertising or publicity pertaining to distribution of the 

-  software without specific, written prior permission.

-

-  The author disclaim all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-/** \file

- *  \brief USB mode and capability macros.

- *

- *  This file defines macros indicating the type of USB controller the library is being compiled for, and its

- *  capabilities. These macros may then be referenced in the user application to selectively enable or disable

- *  code sections depending on if they are defined or not.

- *

- *  \note This file should not be included directly. It is automatically included as needed by the USB driver

- *        dispatch header located in LUFA/Drivers/USB/USB.h.

- */

-

-/** \ingroup Group_USB

- *  @defgroup Group_USBMode USB Mode Tokens

- *

- *  After the inclusion of the master USB driver header, one or more of the following

- *  tokens may be defined, to allow the user code to conditionally enable or disable

- *  code based on the USB controller family and allowable USB modes. These tokens may

- *  be tested against to eliminate code relating to a USB mode which is not enabled for

- *  the given compilation.

- *

- *  @{

- */

-

-#ifndef __USBMODE_H__

-#define __USBMODE_H__

-

-	/* Preprocessor Checks: */

-		#if !defined(__INCLUDE_FROM_USB_DRIVER)

-			#error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.

-		#endif

-		

-	/* Public Interface - May be used in end-application: */

-	#if defined(__DOXYGEN__)

-		/** Indicates that the target AVR microcontroller belongs to the Series 2 USB controller

-		 *  (i.e. AT90USBXXX2 or ATMEGAXXU2) when defined.

-		 */

-		#define USB_SERIES_2_AVR

-

-		/** Indicates that the target AVR microcontroller belongs to the Series 4 USB controller

-		 *  (i.e. ATMEGAXXU4) when defined.

-		 */

-		#define USB_SERIES_4_AVR

-

-		/** Indicates that the target AVR microcontroller belongs to the Series 6 USB controller

-		 *  (i.e. AT90USBXXX6) when defined.

-		 */

-		#define USB_SERIES_6_AVR

-

-		/** Indicates that the target AVR microcontroller belongs to the Series 7 USB controller

-		 *  (i.e. AT90USBXXX7) when defined.

-		 */

-		#define USB_SERIES_7_AVR

-

-		/** Indicates that the target AVR microcontroller and compilation settings allow for the

-		 *  target to be configured in USB Device mode when defined.

-		 */

-		#define USB_CAN_BE_DEVICE

-

-		/** Indicates that the target AVR microcontroller and compilation settings allow for the

-		 *  target to be configured in USB Host mode when defined.

-		 */

-		#define USB_CAN_BE_HOST

-

-		/** Indicates that the target AVR microcontroller and compilation settings allow for the

-		 *  target to be configured in either USB Device or Host mode when defined.

-		 */

-		#define USB_CAN_BE_BOTH

-	#else

-		/* Macros: */			

-			#if (defined(__AVR_AT90USB162__) || defined(__AVR_AT90USB82__)  || \

-			     defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega8U2__))

-				#define USB_SERIES_2_AVR

-			#elif (defined(__AVR_ATmega32U4__) || defined(__AVR_ATmega16U4__))

-				#define USB_SERIES_4_AVR

-			#elif (defined(__AVR_ATmega32U6__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__))

-				#define USB_SERIES_6_AVR

-			#elif (defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1287__))

-				#define USB_SERIES_7_AVR

-			#endif			

-

-			#if !defined(USB_SERIES_7_AVR)		

-				#if defined(USB_HOST_ONLY)

-					#error USB_HOST_ONLY is not available for the currently selected USB AVR model.

-				#endif

-				

-				#if !defined(USB_DEVICE_ONLY)

-					#define USB_DEVICE_ONLY

-				#endif

-			#endif

-

-			#if (!defined(USB_DEVICE_ONLY) && !defined(USB_HOST_ONLY))

-				#define USB_CAN_BE_BOTH

-				#define USB_CAN_BE_HOST

-				#define USB_CAN_BE_DEVICE

-			#elif defined(USB_HOST_ONLY)

-				#define USB_CAN_BE_HOST

-			#elif defined(USB_DEVICE_ONLY)

-				#define USB_CAN_BE_DEVICE

-			#endif

-			

-			#if (defined(USB_HOST_ONLY) && defined(USB_DEVICE_ONLY))

-				#error USB_HOST_ONLY and USB_DEVICE_ONLY are mutually exclusive.

-			#endif

-	#endif

-	

-#endif

-

+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2010.
+              
+  dean [at] fourwalledcubicle [dot] com
+      www.fourwalledcubicle.com
+*/
+
+/*
+  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this 
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in 
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting 
+  documentation, and that the name of the author not be used in 
+  advertising or publicity pertaining to distribution of the 
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief USB mode and capability macros.
+ *
+ *  This file defines macros indicating the type of USB controller the library is being compiled for, and its
+ *  capabilities. These macros may then be referenced in the user application to selectively enable or disable
+ *  code sections depending on if they are defined or not.
+ *
+ *  \note This file should not be included directly. It is automatically included as needed by the USB driver
+ *        dispatch header located in LUFA/Drivers/USB/USB.h.
+ */
+
+/** \ingroup Group_USB
+ *  @defgroup Group_USBMode USB Mode Tokens
+ *
+ *  After the inclusion of the master USB driver header, one or more of the following
+ *  tokens may be defined, to allow the user code to conditionally enable or disable
+ *  code based on the USB controller family and allowable USB modes. These tokens may
+ *  be tested against to eliminate code relating to a USB mode which is not enabled for
+ *  the given compilation.
+ *
+ *  @{
+ */
+
+#ifndef __USBMODE_H__
+#define __USBMODE_H__
+
+	/* Preprocessor Checks: */
+		#if !defined(__INCLUDE_FROM_USB_DRIVER)
+			#error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
+		#endif
+		
+	/* Public Interface - May be used in end-application: */
+	#if defined(__DOXYGEN__)
+		/** Indicates that the target AVR microcontroller belongs to the Series 2 USB controller
+		 *  (i.e. AT90USBXXX2 or ATMEGAXXU2) when defined.
+		 */
+		#define USB_SERIES_2_AVR
+
+		/** Indicates that the target AVR microcontroller belongs to the Series 4 USB controller
+		 *  (i.e. ATMEGAXXU4) when defined.
+		 */
+		#define USB_SERIES_4_AVR
+
+		/** Indicates that the target AVR microcontroller belongs to the Series 6 USB controller
+		 *  (i.e. AT90USBXXX6) when defined.
+		 */
+		#define USB_SERIES_6_AVR
+
+		/** Indicates that the target AVR microcontroller belongs to the Series 7 USB controller
+		 *  (i.e. AT90USBXXX7) when defined.
+		 */
+		#define USB_SERIES_7_AVR
+
+		/** Indicates that the target AVR microcontroller and compilation settings allow for the
+		 *  target to be configured in USB Device mode when defined.
+		 */
+		#define USB_CAN_BE_DEVICE
+
+		/** Indicates that the target AVR microcontroller and compilation settings allow for the
+		 *  target to be configured in USB Host mode when defined.
+		 */
+		#define USB_CAN_BE_HOST
+
+		/** Indicates that the target AVR microcontroller and compilation settings allow for the
+		 *  target to be configured in either USB Device or Host mode when defined.
+		 */
+		#define USB_CAN_BE_BOTH
+	#else
+		/* Macros: */			
+			#if (defined(__AVR_AT90USB162__) || defined(__AVR_AT90USB82__)  || \
+			     defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega8U2__))
+				#define USB_SERIES_2_AVR
+			#elif (defined(__AVR_ATmega32U4__) || defined(__AVR_ATmega16U4__))
+				#define USB_SERIES_4_AVR
+			#elif (defined(__AVR_ATmega32U6__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__))
+				#define USB_SERIES_6_AVR
+			#elif (defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1287__))
+				#define USB_SERIES_7_AVR
+			#endif			
+
+			#if !defined(USB_SERIES_7_AVR)		
+				#if defined(USB_HOST_ONLY)
+					#error USB_HOST_ONLY is not available for the currently selected USB AVR model.
+				#endif
+				
+				#if !defined(USB_DEVICE_ONLY)
+					#define USB_DEVICE_ONLY
+				#endif
+			#endif
+
+			#if (!defined(USB_DEVICE_ONLY) && !defined(USB_HOST_ONLY))
+				#define USB_CAN_BE_BOTH
+				#define USB_CAN_BE_HOST
+				#define USB_CAN_BE_DEVICE
+			#elif defined(USB_HOST_ONLY)
+				#define USB_CAN_BE_HOST
+			#elif defined(USB_DEVICE_ONLY)
+				#define USB_CAN_BE_DEVICE
+			#endif
+			
+			#if (defined(USB_HOST_ONLY) && defined(USB_DEVICE_ONLY))
+				#error USB_HOST_ONLY and USB_DEVICE_ONLY are mutually exclusive.
+			#endif
+	#endif
+	
+#endif
+
 /** @} */
\ No newline at end of file