Initial restructuring of the core USB driver module to support multiple architectures in the future.

1 files changed, 0 insertions, 138 deletions

diff --git a/LUFA/Drivers/USB/HighLevel/USBMode.h b/LUFA/Drivers/USB/HighLevel/USBMode.h
deleted file mode 100644
index 58f9927dc..000000000
--- a/LUFA/Drivers/USB/HighLevel/USBMode.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2011.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaim all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *  \brief USB mode and capability macros.
- *
- *  This file defines macros indicating the type of USB controller the library is being compiled for, and its
- *  capabilities. These macros may then be referenced in the user application to selectively enable or disable
- *  code sections depending on if they are defined or not.
- *
- *  \note This file should not be included directly. It is automatically included as needed by the USB driver
- *        dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-/** \ingroup Group_USB
- *  \defgroup Group_USBMode USB Mode Tokens
- *
- *  After the inclusion of the master USB driver header, one or more of the following
- *  tokens may be defined, to allow the user code to conditionally enable or disable
- *  code based on the USB controller family and allowable USB modes. These tokens may
- *  be tested against to eliminate code relating to a USB mode which is not enabled for
- *  the given compilation.
- *
- *  @{
- */
-
-#ifndef __USBMODE_H__
-#define __USBMODE_H__
-
-	/* Preprocessor Checks: */
-		#if !defined(__INCLUDE_FROM_USB_DRIVER)
-			#error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
-		#endif
-
-	/* Public Interface - May be used in end-application: */
-	#if defined(__DOXYGEN__)
-		/** Indicates that the target AVR microcontroller belongs to the Series 2 USB controller
-		 *  (i.e. AT90USBxxx2 or ATMEGAxxU2) when defined.
-		 */
-		#define USB_SERIES_2_AVR
-
-		/** Indicates that the target AVR microcontroller belongs to the Series 4 USB controller
-		 *  (i.e. ATMEGAxxU4) when defined.
-		 */
-		#define USB_SERIES_4_AVR
-
-		/** Indicates that the target AVR microcontroller belongs to the Series 6 USB controller
-		 *  (i.e. AT90USBxxx6) when defined.
-		 */
-		#define USB_SERIES_6_AVR
-
-		/** Indicates that the target AVR microcontroller belongs to the Series 7 USB controller
-		 *  (i.e. AT90USBxxx7) when defined.
-		 */
-		#define USB_SERIES_7_AVR
-
-		/** Indicates that the target AVR microcontroller and compilation settings allow for the
-		 *  target to be configured in USB Device mode when defined.
-		 */
-		#define USB_CAN_BE_DEVICE
-
-		/** Indicates that the target AVR microcontroller and compilation settings allow for the
-		 *  target to be configured in USB Host mode when defined.
-		 */
-		#define USB_CAN_BE_HOST
-
-		/** Indicates that the target AVR microcontroller and compilation settings allow for the
-		 *  target to be configured in either USB Device or Host mode when defined.
-		 */
-		#define USB_CAN_BE_BOTH
-	#else
-		/* Macros: */
-			#if (defined(__AVR_AT90USB162__) || defined(__AVR_AT90USB82__)  || \
-			     defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega8U2__))
-				#define USB_SERIES_2_AVR
-			#elif (defined(__AVR_ATmega32U4__) || defined(__AVR_ATmega16U4__))
-				#define USB_SERIES_4_AVR
-			#elif (defined(__AVR_ATmega32U6__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__))
-				#define USB_SERIES_6_AVR
-			#elif (defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1287__))
-				#define USB_SERIES_7_AVR
-			#endif
-
-			#if !defined(USB_SERIES_7_AVR)
-				#if defined(USB_HOST_ONLY)
-					#error USB_HOST_ONLY is not available for the currently selected USB AVR model.
-				#endif
-
-				#if !defined(USB_DEVICE_ONLY)
-					#define USB_DEVICE_ONLY
-				#endif
-			#endif
-
-			#if (!defined(USB_DEVICE_ONLY) && !defined(USB_HOST_ONLY))
-				#define USB_CAN_BE_BOTH
-				#define USB_CAN_BE_HOST
-				#define USB_CAN_BE_DEVICE
-			#elif defined(USB_HOST_ONLY)
-				#define USB_CAN_BE_HOST
-			#elif defined(USB_DEVICE_ONLY)
-				#define USB_CAN_BE_DEVICE
-			#endif
-
-			#if (defined(USB_HOST_ONLY) && defined(USB_DEVICE_ONLY))
-				#error USB_HOST_ONLY and USB_DEVICE_ONLY are mutually exclusive.
-			#endif
-	#endif
-
-#endif
-
-/** @} */