diff options
author | Dean Camera <dean@fourwalledcubicle.com> | 2009-12-27 14:17:01 +0000 |
---|---|---|
committer | Dean Camera <dean@fourwalledcubicle.com> | 2009-12-27 14:17:01 +0000 |
commit | d15cbdd4905cf56d592ae8c559beab1e481139d8 (patch) | |
tree | 4bafb08ea08cf79d03972729846d0d78fe437f35 /Projects/AVRISP-MKII/Lib | |
parent | 8301dc553ed9d4e2072001ed56553dba57db038c (diff) | |
download | lufa-d15cbdd4905cf56d592ae8c559beab1e481139d8.tar.gz lufa-d15cbdd4905cf56d592ae8c559beab1e481139d8.tar.bz2 lufa-d15cbdd4905cf56d592ae8c559beab1e481139d8.zip |
Fix mistakes in the XPROGTarget.c/.h files for TPI mode software USART clock rate and PDI mode XPLAIN board autoconfiguration.
Diffstat (limited to 'Projects/AVRISP-MKII/Lib')
-rw-r--r-- | Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c | 30 | ||||
-rw-r--r-- | Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h | 105 |
2 files changed, 56 insertions, 79 deletions
diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c index 7908c654e..29397a6d2 100644 --- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c +++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c @@ -145,6 +145,8 @@ ISR(TIMER1_COMPB_vect, ISR_BLOCK) /** Enables the target's PDI interface, holding the target in reset until PDI mode is exited. */
void XPROGTarget_EnableTargetPDI(void)
{
+ IsSending = false;
+
#if defined(XPROG_VIA_HARDWARE_USART)
/* Set Tx and XCK as outputs, Rx as input */
DDRD |= (1 << 5) | (1 << 3);
@@ -160,10 +162,6 @@ void XPROGTarget_EnableTargetPDI(void) UBRR1 = (F_CPU / 1000000UL);
UCSR1B = (1 << TXEN1);
UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1);
-
- /* Send two BREAKs of 12 bits each to enable PDI interface (need at least 16 idle bits) */
- XPROGTarget_SendBreak();
- XPROGTarget_SendBreak();
#else
/* Set DATA and CLOCK lines to outputs */
BITBANG_PDIDATA_DDR |= BITBANG_PDIDATA_MASK;
@@ -174,20 +172,22 @@ void XPROGTarget_EnableTargetPDI(void) asm volatile ("NOP"::);
asm volatile ("NOP"::);
- /* Fire timer compare channel A ISR every 90 cycles to manage the software USART */
- OCR1A = 90;
+ /* Fire timer compare channel A ISR to manage the software USART */
+ OCR1A = BITS_BETWEEN_USART_CLOCKS;
TCCR1B = (1 << WGM12) | (1 << CS10);
TIMSK1 = (1 << OCIE1A);
-
- /* Send two BREAKs of 12 bits each to enable TPI interface (need at least 16 idle bits) */
+#endif
+
+ /* Send two BREAKs of 12 bits each to enable PDI interface (need at least 16 idle bits) */
XPROGTarget_SendBreak();
XPROGTarget_SendBreak();
-#endif
}
/** Enables the target's TPI interface, holding the target in reset until TPI mode is exited. */
void XPROGTarget_EnableTargetTPI(void)
{
+ IsSending = false;
+
/* Set /RESET line low for at least 90ns to enable TPI functionality */
RESET_LINE_DDR |= RESET_LINE_MASK;
RESET_LINE_PORT &= ~RESET_LINE_MASK;
@@ -204,10 +204,6 @@ void XPROGTarget_EnableTargetTPI(void) UBRR1 = (F_CPU / 1000000UL);
UCSR1B = (1 << TXEN1);
UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1);
-
- /* Send two BREAKs of 12 bits each to enable TPI interface (need at least 16 idle bits) */
- XPROGTarget_SendBreak();
- XPROGTarget_SendBreak();
#else
/* Set DATA and CLOCK lines to outputs */
BITBANG_TPIDATA_DDR |= BITBANG_TPIDATA_MASK;
@@ -216,15 +212,15 @@ void XPROGTarget_EnableTargetTPI(void) /* Set DATA line high for idle state */
BITBANG_TPIDATA_PORT |= BITBANG_TPIDATA_MASK;
- /* Fire timer capture channel B ISR every 90 cycles to manage the software USART */
- OCR1B = 9;
+ /* Fire timer capture channel B ISR to manage the software USART */
+ OCR1B = BITS_BETWEEN_USART_CLOCKS;
TCCR1B = (1 << WGM12) | (1 << CS10);
TIMSK1 = (1 << OCIE1B);
-
+#endif
+
/* Send two BREAKs of 12 bits each to enable TPI interface (need at least 16 idle bits) */
XPROGTarget_SendBreak();
XPROGTarget_SendBreak();
-#endif
}
/** Disables the target's PDI interface, exits programming mode and starts the target's application. */
diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h index 7aca20b9d..4abd891ea 100644 --- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h +++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h @@ -56,29 +56,7 @@ /* Defines: */
#if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
-// #define XPROG_VIA_HARDWARE_USART
-
- #define BITBANG_PDIDATA_PORT PORTD
- #define BITBANG_PDIDATA_DDR DDRD
- #define BITBANG_PDIDATA_PIN PIND
- #define BITBANG_PDIDATA_MASK (1 << 3)
-
- #define BITBANG_PDICLOCK_PORT PORTD
- #define BITBANG_PDICLOCK_DDR DDRD
- #define BITBANG_PDICLOCK_PIN PIND
- #define BITBANG_PDICLOCK_MASK (1 << 5)
-
- #define BITBANG_TPIDATA_PORT PORTB
- #define BITBANG_TPIDATA_DDR DDRB
- #define BITBANG_TPIDATA_PIN PINB
- #define BITBANG_TPIDATA_MASK (1 << 3)
-
- #define BITBANG_TPICLOCK_PORT PORTB
- #define BITBANG_TPICLOCK_DDR DDRB
- #define BITBANG_TPICLOCK_PIN PINB
- #define BITBANG_TPICLOCK_MASK (1 << 1)
-
-
+ #define XPROG_VIA_HARDWARE_USART
#else
#define BITBANG_PDIDATA_PORT PORTB
#define BITBANG_PDIDATA_DDR DDRB
@@ -101,55 +79,58 @@ #define BITBANG_TPICLOCK_MASK (1 << 1)
#endif
+ /** Number of cycles between each clock when software USART mode is used */
+ #define BITS_BETWEEN_USART_CLOCKS 100
+
/** Total number of bits in a single USART frame */
- #define BITS_IN_USART_FRAME 12
+ #define BITS_IN_USART_FRAME 12
- #define PDI_CMD_LDS 0x00
- #define PDI_CMD_LD 0x20
- #define PDI_CMD_STS 0x40
- #define PDI_CMD_ST 0x60
- #define PDI_CMD_LDCS 0x80
- #define PDI_CMD_REPEAT 0xA0
- #define PDI_CMD_STCS 0xC0
- #define PDI_CMD_KEY 0xE0
+ #define PDI_CMD_LDS 0x00
+ #define PDI_CMD_LD 0x20
+ #define PDI_CMD_STS 0x40
+ #define PDI_CMD_ST 0x60
+ #define PDI_CMD_LDCS 0x80
+ #define PDI_CMD_REPEAT 0xA0
+ #define PDI_CMD_STCS 0xC0
+ #define PDI_CMD_KEY 0xE0
- #define PDI_STATUS_REG 0
- #define PDI_RESET_REG 1
- #define PDI_CTRL_REG 2
+ #define PDI_STATUS_REG 0
+ #define PDI_RESET_REG 1
+ #define PDI_CTRL_REG 2
- #define PDI_STATUS_NVM (1 << 1)
- #define PDI_RESET_KEY 0x59
+ #define PDI_STATUS_NVM (1 << 1)
+ #define PDI_RESET_KEY 0x59
- #define PDI_NVMENABLE_KEY (uint8_t[]){0x12, 0x89, 0xAB, 0x45, 0xCD, 0xD8, 0x88, 0xFF}
+ #define PDI_NVMENABLE_KEY (uint8_t[]){0x12, 0x89, 0xAB, 0x45, 0xCD, 0xD8, 0x88, 0xFF}
- #define PDI_DATSIZE_1BYTE 0
- #define PDI_DATSIZE_2BYTES 1
- #define PDI_DATSIZE_3BYTES 2
- #define PDI_DATSIZE_4BYTES 3
+ #define PDI_DATSIZE_1BYTE 0
+ #define PDI_DATSIZE_2BYTES 1
+ #define PDI_DATSIZE_3BYTES 2
+ #define PDI_DATSIZE_4BYTES 3
- #define PDI_POINTER_INDIRECT 0
- #define PDI_POINTER_INDIRECT_PI 1
- #define PDI_POINTER_DIRECT 2
-
- #define TPI_CMD_SLD 0x20
- #define TPI_CMD_SST 0x60
- #define TPI_CMD_SSTPR 0x68
- #define TPI_CMD_SIN 0x10
- #define TPI_CMD_SOUT 0x90
- #define TPI_CMD_SLDCS 0x80
- #define TPI_CMD_SSTCS 0xC0
- #define TPI_CMD_SKEY 0xE0
-
- #define TPI_STATUS_REG 0x00
- #define TPI_CTRL_REG 0x02
- #define TPI_ID_REG 0x0F
+ #define PDI_POINTER_INDIRECT 0
+ #define PDI_POINTER_INDIRECT_PI 1
+ #define PDI_POINTER_DIRECT 2
+
+ #define TPI_CMD_SLD 0x20
+ #define TPI_CMD_SST 0x60
+ #define TPI_CMD_SSTPR 0x68
+ #define TPI_CMD_SIN 0x10
+ #define TPI_CMD_SOUT 0x90
+ #define TPI_CMD_SLDCS 0x80
+ #define TPI_CMD_SSTCS 0xC0
+ #define TPI_CMD_SKEY 0xE0
+
+ #define TPI_STATUS_REG 0x00
+ #define TPI_CTRL_REG 0x02
+ #define TPI_ID_REG 0x0F
- #define TPI_STATUS_NVM (1 << 1)
+ #define TPI_STATUS_NVM (1 << 1)
- #define TPI_NVMENABLE_KEY (uint8_t[]){0x12, 0x89, 0xAB, 0x45, 0xCD, 0xD8, 0x88, 0xFF}
+ #define TPI_NVMENABLE_KEY (uint8_t[]){0x12, 0x89, 0xAB, 0x45, 0xCD, 0xD8, 0x88, 0xFF}
- #define TPI_POINTER_INDIRECT 0
- #define TPI_POINTER_INDIRECT_PI (1 << 2)
+ #define TPI_POINTER_INDIRECT 0
+ #define TPI_POINTER_INDIRECT_PI (1 << 2)
/* Function Prototypes: */
void XPROGTarget_EnableTargetPDI(void);
|