Combined Mouse, MouseViaInt and MouseFullInt demos into a single unified demo.

Corrections to Keyboard demo.

Removed AVRISP_Programmer project due to code quality concerns.

1 files changed, 0 insertions, 176 deletions

diff --git a/Projects/AVRISP_Programmer/AVRISP_Firmware_Design.txt b/Projects/AVRISP_Programmer/AVRISP_Firmware_Design.txt
deleted file mode 100644
index 643454d48..000000000
--- a/Projects/AVRISP_Programmer/AVRISP_Firmware_Design.txt
+++ /dev/null
@@ -1,176 +0,0 @@
-Instructions for converting the LUFA USBtoSerial Demo to an AVR ISP Programmer.

-By Opendous Inc., Copyright under the Creative Commons Attribution License:

-http://creativecommons.org/licenses/by/3.0/

-

-1) Start with the LUFA/Demos/USBtoSerial firmware.

-    - rename USBtoSerial.c, USBtoSerial.h, and USBtoSerial.aps to

-      AVRISP_Programmer.*

-    - edit AVRISP_Programmer.aps and rename all instances of "USBtoSerial" to

-      "AVRISP_Programmer"

-    - copy AVRISP_Programmer.txt from an older version of AVRISP_Programmer

-

-2) Edit makefile by changing TARGET from "USBtoSerial" to "AVRISP_Programmer"

-

-3) Edit AVRISP_Programmer.h:

-    - change ifdef _USB_TO_SERIAL_H to _AVRISP_PROGRAMMER_H_

-    - rename ReconfigureUSART(void) to ReconfigureSPI(void)

-    - add  void processHostSPIRequest(void);  &  void delay_ms(uint8_t dly);

-    - replace the define for Serial.h with one for SPI.h:

-      #include <libs/LUFA/Drivers/AT90USBXXX/SPI.h>

-

-4) Make alterations to Descriptors.c

-    - change manufacturer string to "www.AVRopendous.org", length=19

-    - change product string to "LUFA-Based AVR ISP Programmer", length=29

-

-5) Edit Ringbuff.h to enable the Peek Command:  #define BUFF_USEPEEK

-

-6) Edit AVRISP_Programmer.c:

-    - change #include "USBtoSerial.h"  to  #include "AVRISP_Programmer.h"

-    - change BUTTLOADTAG(ProjName to "LUFA AVR910 ISP Programmer"

-    - in main(), rename ReconfigureUSART() to Reconfigure();

-    - in EVENT_HANDLER(USB_UnhandledControlPacket), rename ReconfigureUSART

-    - delete the ISRs: ISR(USART1_RX_vect)  &  ISR(USART1_TX_vect)

-    - delete ReconfigureUSART(void)

-    - add  void ReconfigureSPI(void),  void processHostSPIRequest(void),

-      and  void delay_ms(uint8_t dly)  from a previous version

-    - add Timer1 and SPI initialization code to main():

-	    /* Hardware Initialization */

-	    //LEDs_Init();

-	    DDRB = 0;

-	    PORTB = 0;

-	    DDRC |= ((1 << PC2) | (1 << PC4) | (1 << PC5) | (1 << PC6) | (1 << PC7)); //AT90USBxx2

-	    // PC2 is also used for RESET, so set it HIGH initially - note 'P' command sets it to LOW (Active)

-	    PORTC |= ((1 << PC2) | (1 << PC4) | (1 << PC5) | (1 << PC6) | (1 << PC7)); //AT90USBxx2

-	    DDRD = 0;

-	    PORTD = (1 << PB7); // only PB7(HWB) should be High as this is the bootloader pin

-	    // Prepare PortB for SPI - set PB0(^SS), PB1(SCK), PB2(MOSI) as output as well as all other pins except PB3(MISO)

-	    DDRB = (1 << PB0) | (1 << PB1) | (1 << PB2) | (0 << PB3) | (1 << PB4) | (1 << PB5) | (1 << PB6) | (1 << PB7);

-	    PORTB |= (1 << PB0);

-

-	    // initialize Timer1 for use in delay function

-	    TCCR1A = 0;

-	    //TCCR1B = (1 << CS10); // no prescaling, use CLK

-	    TCCR1B = ((1 << CS12) | (1 << CS10)); // prescale by CLK/1024

-	    // 8MHz/1024 = 7813 ticks per second --> ~8 ticks per millisecond (ms)

-	    timerval = TCNT1; // start timer1

-

-    - In TASK(CDC_Task) in the

-        if (USB_IsConnected) {

-            if (Endpoint_ReadWriteAllowed()) {

-                while (Endpoint_BytesInEndpoint()) {

-                    ...

-      structure, after  Buffer_StoreElement(&Rx_Buffer, Endpoint_Read_Byte()):

-

-        /* Each time there is an element, check which comand should be

-	        run and if enough data is available to run that command.

-	        There are 1-byte, 2-byte, 3-byte, 4-byte commands, and 5-byte commands

-	        Remember that the "which command" byte counts as 1 */

-        if (Rx_Buffer.Elements == 0) {

-	        // do nothing, wait for data

-        } else {

-	        tempByte = Buffer_PeekElement(&Rx_Buffer); // peek at first element

-

-		        /* make sure the issued command and associated data are all ready */

-	        if (Rx_Buffer.Elements == 1) { // zero data byte command

-		        if ((tempByte == 'P') | (tempByte == 'a') | (tempByte == 'm') |

-		        (tempByte == 'R') | (tempByte == 'd') | (tempByte == 'e') |

-		        (tempByte == 'L') | (tempByte == 's') | (tempByte == 't') | 

-		        (tempByte == 'S') | (tempByte == 'V') | (tempByte == 'v') |

-		        (tempByte == 'p') | (tempByte == 'F')) {

-            	processHostSPIRequest(); // command has enough data, process it

-		        }

-	        } else if (Rx_Buffer.Elements == 2) { // one data byte command

-		        if ((tempByte == 'T') | (tempByte == 'c') | (tempByte == 'C') |

-			        (tempByte == 'D') | (tempByte == 'l') | (tempByte == 'f') |

-			        (tempByte == 'x') | (tempByte == 'y')) {

-			        processHostSPIRequest(); // command has enough data, process it

-		        }

-	        } else if (Rx_Buffer.Elements == 3) { // two data byte command

-		        if ((tempByte == 'A') | (tempByte == 'Z')) {

-			        processHostSPIRequest(); // command has enough data, process it

-		        }

-	        } else if (Rx_Buffer.Elements == 4) { // three data byte command

-		        if ((tempByte == ':')) {

-            	processHostSPIRequest(); // command has enough data, process it

-		        }

-	        } else if (Rx_Buffer.Elements == 5) { // four data byte command

-		        if ((tempByte == '.')) {

-			        processHostSPIRequest(); // command has enough data, process it

-		        }

-	        } else {

-		        // do nothing

-	        }

-        }

-

-    - need to add code to flush the buffer.  Change:

-        /* Check if Rx buffer contains data */

-		if (Rx_Buffer.Elements)

-		{

-			/* Initiate the transmission of the buffer contents if USART idle*/

-			if (!(Transmitting))

-			{

-				Transmitting = true;

-				Serial_TxByte(Buffer_GetElement(&Rx_Buffer));

-			}

-		}

-      To:

-        /* Check if Rx buffer contains data */

-		if (Rx_Buffer.Elements)

-		{

-			/* Initiate the transmission of the buffer contents if USART idle*/

-			if (!(Transmitting))

-			{

-				Transmitting = true;

-				/* The following flushes the receive buffer to prepare for new

-                   data and commands. Need to flush the buffer as the command

-                   byte which is peeked above needs to be dealt with, otherwise

-                   the command bytes will overflow the buffer eventually */

-				//Buffer_GetElement(&Rx_Buffer); // also works

-				Buffer_Initialize(&Rx_Buffer);

-			}

-		}

-

-    - need to add the following defines and globals:

-        #define RESETPORT       PORTB

-        #define RESETPIN        PB0

-        #define RESETPORT2      PORTC

-        #define RESETPIN2       PC2

-        #define CR_HEX          '\r'

-

-        #define DELAY_VERYSHORT    0x01

-        #define DELAY_SHORT        0x02

-        #define DELAY_MEDIUM       0x03

-        #define DELAY_LONG         0x05

-        #define DELAY_MULTIPLE     0x04

-

-        /*  AVR Device Codes - Can have a maximum of 14 but can be any you want.

-            Note that these are completely irrelevent.  If AVRdude supports a

-            device, then that device is programmable.  Use -F switch to ignore

-            device codes. */

-        #define AVRDEVCODE01	0x55 /* ATtiny12 */

-        #define AVRDEVCODE02	0x56 /* ATtiny15 */

-        #define AVRDEVCODE03	0x5E /* ATtiny261 */

-        #define AVRDEVCODE04	0x76 /* ATmega8 */

-        #define AVRDEVCODE05	0x74 /* ATmega16 */

-        #define AVRDEVCODE06	0x72 /* ATmega32 */

-        #define AVRDEVCODE07	0x45 /* ATmega64 */

-        #define AVRDEVCODE08	0x74 /* ATmega644 */

-        #define AVRDEVCODE09	0x43 /* ATmega128 */

-        #define AVRDEVCODE10	0x63 /* ATmega162 */

-        #define AVRDEVCODE11	0x78 /* ATmega169 */

-        #define AVRDEVCODE12	0x6C /* AT90S4434 */

-        #define AVRDEVCODE13	0x38 /* AT90S8515A */

-        #define AVRDEVCODE14	0x65 /* AT90S8555 */

-

-        /* some global variables used throughout */

-        uint8_t tempIOreg = 0;

-        uint8_t tempIOreg2 = 0;

-        uint8_t tempIOreg3 = 0;

-        uint8_t tempIOreg4 = 0;

-        uint8_t dataWidth = 0;

-        uint8_t firstRun = 1;

-        uint8_t deviceCode = 0;

-        uint8_t tempByte = 0;

-        uint16_t currAddress = 0;

-        uint16_t timerval = 0;

-