Combined Mouse, MouseViaInt and MouseFullInt demos into a single unified demo.

Corrections to Keyboard demo.

Removed AVRISP_Programmer project due to code quality concerns.

1 files changed, 0 insertions, 104 deletions

diff --git a/Projects/AVRISP_Programmer/Sample_Programming_Session.txt b/Projects/AVRISP_Programmer/Sample_Programming_Session.txt
deleted file mode 100644
index b5af76ebb..000000000
--- a/Projects/AVRISP_Programmer/Sample_Programming_Session.txt
+++ /dev/null
@@ -1,104 +0,0 @@
-ubuntu@ubuntu:~/LUFA/Bootloaders/LUFA_DFU_Bootloader_AT90USB162$  sudo avrdude -vv -F -P /dev/ttyACM0 -c avr910 -p usb162 -U flash:w:BootloaderDFU.hex

-

-avrdude: Version 5.5, compiled on May  9 2008 at 13:04:46

-         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/

-

-         System wide configuration file is "/etc/avrdude.conf"

-         User configuration file is "/home/ubuntu/.avrduderc"

-         User configuration file does not exist or is not a regular file, skipping

-

-         Using Port            : /dev/ttyACM0

-         Using Programmer      : avr910

-         AVR Part              : AT90USB162

-         Chip Erase delay      : 9000 us

-         PAGEL                 : PD7

-         BS2                   : PA0

-         RESET disposition     : dedicated

-         RETRY pulse           : SCK

-         serial program mode   : yes

-         parallel program mode : yes

-         Timeout               : 200

-         StabDelay             : 100

-         CmdexeDelay           : 25

-         SyncLoops             : 32

-         ByteDelay             : 0

-         PollIndex             : 3

-         PollValue             : 0x53

-         Memory Detail         :

-

-                                  Block Poll               Page                       Polled

-           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack

-           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------

-           eeprom        65    10     8    0 no        512    4      0  9000  9000 0x00 0x00

-           flash         65     6   128    0 yes     16384  128    128  4500  4500 0x00 0x00

-           lfuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00

-           hfuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00

-           efuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00

-           lock           0     0     0    0 no          1    0      0  9000  9000 0x00 0x00

-           calibration    0     0     0    0 no          1    0      0     0     0 0x00 0x00

-           signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00

-

-         Programmer Type : avr910

-         Description     : Atmel Low Cost Serial Programmer

-

-Found programmer: Id = "AVR ISP"; type = S

-    Software Version = 2.3; Hardware Version = 1.0

-Programmer supports auto addr increment.

-

-Programmer supports the following devices:

-    Device code: 0x55 = ATtiny12

-    Device code: 0x56 = ATtiny15

-    Device code: 0x5e = ATtiny2313

-    Device code: 0x76 = ATMEGA8

-    Device code: 0x74 = ATMEGA6450

-    Device code: 0x72 = ATMEGA32

-    Device code: 0x45 = ATMEGA64

-    Device code: 0x74 = ATMEGA6450

-    Device code: 0x43 = ATMEGA128

-    Device code: 0x63 = ATMEGA162

-    Device code: 0x78 = ATMEGA169

-    Device code: 0x6c = AT90S4434

-    Device code: 0x38 = AT90S8515

-    Device code: 0x65 = (unknown)

-

-avrdude: warning: selected device is not supported by programmer: usb162

-avrdude: AVR device initialized and ready to accept instructions

-

-Reading | ################################################## | 100% 0.00s

-

-avrdude: Device signature = 0x1e9482

-avrdude: safemode: lfuse reads as 5E

-avrdude: safemode: hfuse reads as D9

-avrdude: safemode: efuse reads as F4

-avrdude: NOTE: FLASH memory has been specified, an erase cycle will be performed

-         To disable this feature, specify the -D option.

-avrdude: erasing chip

-avrdude: reading input file "BootloaderDFU.hex"

-avrdude: input file BootloaderDFU.hex auto detected as Intel Hex

-avrdude: writing flash (16066 bytes):

-

-Writing | ################################################## | 100% 33.39s

-

-

-

-avrdude: 16066 bytes of flash written

-avrdude: verifying flash memory against BootloaderDFU.hex:

-avrdude: load data flash data from input file BootloaderDFU.hex:

-avrdude: input file BootloaderDFU.hex auto detected as Intel Hex

-avrdude: input file BootloaderDFU.hex contains 16066 bytes

-avrdude: reading on-chip flash data:

-

-Reading | ################################################## | 100% 16.07s

-

-

-

-avrdude: verifying ...

-avrdude: 16066 bytes of flash verified

-

-avrdude: safemode: lfuse reads as 5E

-avrdude: safemode: hfuse reads as D9

-avrdude: safemode: efuse reads as F4

-avrdude: safemode: Fuses OK

-

-avrdude done.  Thank you.
-