Spell check all source files once again to find any typos.

9 files changed, 90 insertions, 90 deletions

diff --git a/Projects/TempDataLogger/Lib/DataflashManager.c b/Projects/TempDataLogger/Lib/DataflashManager.c
index 1750e15b3..3cabda776 100644
--- a/Projects/TempDataLogger/Lib/DataflashManager.c
+++ b/Projects/TempDataLogger/Lib/DataflashManager.c
@@ -30,7 +30,7 @@
 
 /** \file
  *
- *  Functions to manage the physical dataflash media, including reading and writing of
+ *  Functions to manage the physical Dataflash media, including reading and writing of
  *  blocks of data. These functions are called by the SCSI layer when data must be stored
  *  or retrieved to/from the physical storage media. If a different media is used (such
  *  as a SD card or EEPROM), functions similar to these will need to be generated.
@@ -39,9 +39,9 @@
 #define  INCLUDE_FROM_DATAFLASHMANAGER_C
 #include "DataflashManager.h"
 
-/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board dataflash IC(s), from
+/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board Dataflash IC(s), from
  *  the pre-selected data OUT endpoint. This routine reads in OS sized blocks from the endpoint and writes
- *  them to the dataflash in Dataflash page sized blocks.
+ *  them to the Dataflash in Dataflash page sized blocks.
  *
  *  \param[in] MSInterfaceInfo  Pointer to a structure containing a Mass Storage Class configuration and state
  *  \param[in] BlockAddress  Data block starting address for the write sequence
@@ -60,13 +60,13 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn
 	Dataflash_SelectChipFromPage(CurrDFPage);
 
 #if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
-	/* Copy selected dataflash's current page contents to the dataflash buffer */
+	/* Copy selected dataflash's current page contents to the Dataflash buffer */
 	Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF1);
 	Dataflash_SendAddressBytes(CurrDFPage, 0);
 	Dataflash_WaitWhileBusy();
 #endif
 
-	/* Send the dataflash buffer write command */
+	/* Send the Dataflash buffer write command */
 	Dataflash_SendByte(DF_CMD_BUFF1WRITE);
 	Dataflash_SendAddressBytes(0, CurrDFPageByte);
 
@@ -78,7 +78,7 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn
 	{
 		uint8_t BytesInBlockDiv16 = 0;
 		
-		/* Write an endpoint packet sized data block to the dataflash */
+		/* Write an endpoint packet sized data block to the Dataflash */
 		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
 		{
 			/* Check if the endpoint is currently empty */
@@ -92,30 +92,30 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn
 				  return;
 			}
 
-			/* Check if end of dataflash page reached */
+			/* Check if end of Dataflash page reached */
 			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
 			{
-				/* Write the dataflash buffer contents back to the dataflash page */
+				/* Write the Dataflash buffer contents back to the Dataflash page */
 				Dataflash_WaitWhileBusy();
 				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
 				Dataflash_SendAddressBytes(CurrDFPage, 0);
 
-				/* Reset the dataflash buffer counter, increment the page counter */
+				/* Reset the Dataflash buffer counter, increment the page counter */
 				CurrDFPageByteDiv16 = 0;
 				CurrDFPage++;
 
-				/* Once all the dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */
+				/* Once all the Dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */
 				if (Dataflash_GetSelectedChip() == DATAFLASH_CHIP_MASK(DATAFLASH_TOTALCHIPS))
 				  UsingSecondBuffer = !(UsingSecondBuffer);
 
-				/* Select the next dataflash chip based on the new dataflash page index */
+				/* Select the next Dataflash chip based on the new Dataflash page index */
 				Dataflash_SelectChipFromPage(CurrDFPage);
 
 #if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
-				/* If less than one dataflash page remaining, copy over the existing page to preserve trailing data */
+				/* If less than one Dataflash page remaining, copy over the existing page to preserve trailing data */
 				if ((TotalBlocks * (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) < (DATAFLASH_PAGE_SIZE >> 4))
 				{
-					/* Copy selected dataflash's current page contents to the dataflash buffer */
+					/* Copy selected dataflash's current page contents to the Dataflash buffer */
 					Dataflash_WaitWhileBusy();
 					Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_MAINMEMTOBUFF2 : DF_CMD_MAINMEMTOBUFF1);
 					Dataflash_SendAddressBytes(CurrDFPage, 0);
@@ -123,12 +123,12 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn
 				}
 #endif
 
-				/* Send the dataflash buffer write command */
+				/* Send the Dataflash buffer write command */
 				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE);
 				Dataflash_SendAddressBytes(0, 0);				
 			}
 
-			/* Write one 16-byte chunk of data to the dataflash */
+			/* Write one 16-byte chunk of data to the Dataflash */
 			Dataflash_SendByte(Endpoint_Read_Byte());
 			Dataflash_SendByte(Endpoint_Read_Byte());
 			Dataflash_SendByte(Endpoint_Read_Byte());
@@ -146,7 +146,7 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn
 			Dataflash_SendByte(Endpoint_Read_Byte());
 			Dataflash_SendByte(Endpoint_Read_Byte());
 			
-			/* Increment the dataflash page 16 byte block counter */
+			/* Increment the Dataflash page 16 byte block counter */
 			CurrDFPageByteDiv16++;
 
 			/* Increment the block 16 byte block counter */
@@ -161,7 +161,7 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn
 		TotalBlocks--;
 	}
 
-	/* Write the dataflash buffer contents back to the dataflash page */
+	/* Write the Dataflash buffer contents back to the Dataflash page */
 	Dataflash_WaitWhileBusy();
 	Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
 	Dataflash_SendAddressBytes(CurrDFPage, 0x00);
@@ -171,11 +171,11 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn
 	if (!(Endpoint_IsReadWriteAllowed()))
 	  Endpoint_ClearOUT();
 
-	/* Deselect all dataflash chips */
+	/* Deselect all Dataflash chips */
 	Dataflash_DeselectChip();
 }
 
-/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board dataflash IC(s), into
+/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board Dataflash IC(s), into
  *  the pre-selected data IN endpoint. This routine reads in Dataflash page sized blocks from the Dataflash
  *  and writes them in OS sized blocks to the endpoint.
  *
@@ -194,7 +194,7 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf
 	/* Select the correct starting Dataflash IC for the block requested */
 	Dataflash_SelectChipFromPage(CurrDFPage);
 
-	/* Send the dataflash main memory page read command */
+	/* Send the Dataflash main memory page read command */
 	Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
 	Dataflash_SendAddressBytes(CurrDFPage, CurrDFPageByte);
 	Dataflash_SendByte(0x00);
@@ -210,7 +210,7 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf
 	{
 		uint8_t BytesInBlockDiv16 = 0;
 		
-		/* Write an endpoint packet sized data block to the dataflash */
+		/* Write an endpoint packet sized data block to the Dataflash */
 		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
 		{
 			/* Check if the endpoint is currently full */
@@ -224,17 +224,17 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf
 				  return;
 			}
 			
-			/* Check if end of dataflash page reached */
+			/* Check if end of Dataflash page reached */
 			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
 			{
-				/* Reset the dataflash buffer counter, increment the page counter */
+				/* Reset the Dataflash buffer counter, increment the page counter */
 				CurrDFPageByteDiv16 = 0;
 				CurrDFPage++;
 
-				/* Select the next dataflash chip based on the new dataflash page index */
+				/* Select the next Dataflash chip based on the new Dataflash page index */
 				Dataflash_SelectChipFromPage(CurrDFPage);
 				
-				/* Send the dataflash main memory page read command */
+				/* Send the Dataflash main memory page read command */
 				Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
 				Dataflash_SendAddressBytes(CurrDFPage, 0);
 				Dataflash_SendByte(0x00);
@@ -243,7 +243,7 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf
 				Dataflash_SendByte(0x00);
 			}	
 
-			/* Read one 16-byte chunk of data from the dataflash */
+			/* Read one 16-byte chunk of data from the Dataflash */
 			Endpoint_Write_Byte(Dataflash_ReceiveByte());
 			Endpoint_Write_Byte(Dataflash_ReceiveByte());
 			Endpoint_Write_Byte(Dataflash_ReceiveByte());
@@ -261,7 +261,7 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf
 			Endpoint_Write_Byte(Dataflash_ReceiveByte());
 			Endpoint_Write_Byte(Dataflash_ReceiveByte());
 			
-			/* Increment the dataflash page 16 byte block counter */
+			/* Increment the Dataflash page 16 byte block counter */
 			CurrDFPageByteDiv16++;
 			
 			/* Increment the block 16 byte block counter */
@@ -280,14 +280,14 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf
 	if (!(Endpoint_IsReadWriteAllowed()))
 	  Endpoint_ClearIN();
 
-	/* Deselect all dataflash chips */
+	/* Deselect all Dataflash chips */
 	Dataflash_DeselectChip();
 }
 
-/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board dataflash IC(s), from
+/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board Dataflash IC(s), from
  *  the a given RAM buffer. This routine reads in OS sized blocks from the buffer and writes them to the
- *  dataflash in Dataflash page sized blocks. This can be linked to FAT libraries to write files to the
- *  dataflash.
+ *  Dataflash in Dataflash page sized blocks. This can be linked to FAT libraries to write files to the
+ *  Dataflash.
  *
  *  \param[in] BlockAddress  Data block starting address for the write sequence
  *  \param[in] TotalBlocks   Number of blocks of data to write
@@ -306,13 +306,13 @@ void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress,
 	Dataflash_SelectChipFromPage(CurrDFPage);
 
 #if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
-	/* Copy selected dataflash's current page contents to the dataflash buffer */
+	/* Copy selected dataflash's current page contents to the Dataflash buffer */
 	Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF1);
 	Dataflash_SendAddressBytes(CurrDFPage, 0);
 	Dataflash_WaitWhileBusy();
 #endif
 
-	/* Send the dataflash buffer write command */
+	/* Send the Dataflash buffer write command */
 	Dataflash_SendByte(DF_CMD_BUFF1WRITE);
 	Dataflash_SendAddressBytes(0, CurrDFPageByte);
 	
@@ -320,33 +320,33 @@ void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress,
 	{
 		uint8_t BytesInBlockDiv16 = 0;
 		
-		/* Write an endpoint packet sized data block to the dataflash */
+		/* Write an endpoint packet sized data block to the Dataflash */
 		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
 		{
-			/* Check if end of dataflash page reached */
+			/* Check if end of Dataflash page reached */
 			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
 			{
-				/* Write the dataflash buffer contents back to the dataflash page */
+				/* Write the Dataflash buffer contents back to the Dataflash page */
 				Dataflash_WaitWhileBusy();
 				Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
 				Dataflash_SendAddressBytes(CurrDFPage, 0);
 
-				/* Reset the dataflash buffer counter, increment the page counter */
+				/* Reset the Dataflash buffer counter, increment the page counter */
 				CurrDFPageByteDiv16 = 0;
 				CurrDFPage++;
 
-				/* Once all the dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */
+				/* Once all the Dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */
 				if (Dataflash_GetSelectedChip() == DATAFLASH_CHIP_MASK(DATAFLASH_TOTALCHIPS))
 				  UsingSecondBuffer = !(UsingSecondBuffer);
 
-				/* Select the next dataflash chip based on the new dataflash page index */
+				/* Select the next Dataflash chip based on the new Dataflash page index */
 				Dataflash_SelectChipFromPage(CurrDFPage);
 
 #if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE)
-				/* If less than one dataflash page remaining, copy over the existing page to preserve trailing data */
+				/* If less than one Dataflash page remaining, copy over the existing page to preserve trailing data */
 				if ((TotalBlocks * (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) < (DATAFLASH_PAGE_SIZE >> 4))
 				{
-					/* Copy selected dataflash's current page contents to the dataflash buffer */
+					/* Copy selected dataflash's current page contents to the Dataflash buffer */
 					Dataflash_WaitWhileBusy();
 					Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_MAINMEMTOBUFF2 : DF_CMD_MAINMEMTOBUFF1);
 					Dataflash_SendAddressBytes(CurrDFPage, 0);
@@ -354,17 +354,17 @@ void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress,
 				}
 #endif
 
-				/* Send the dataflash buffer write command */
+				/* Send the Dataflash buffer write command */
 				Dataflash_ToggleSelectedChipCS();
 				Dataflash_SendByte(DF_CMD_BUFF1WRITE);
 				Dataflash_SendAddressBytes(0, 0);
 			}
 			
-			/* Write one 16-byte chunk of data to the dataflash */
+			/* Write one 16-byte chunk of data to the Dataflash */
 			for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++)
 			  Dataflash_SendByte(*(BufferPtr++));
 			
-			/* Increment the dataflash page 16 byte block counter */
+			/* Increment the Dataflash page 16 byte block counter */
 			CurrDFPageByteDiv16++;
 
 			/* Increment the block 16 byte block counter */
@@ -375,20 +375,20 @@ void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress,
 		TotalBlocks--;
 	}
 
-	/* Write the dataflash buffer contents back to the dataflash page */
+	/* Write the Dataflash buffer contents back to the Dataflash page */
 	Dataflash_WaitWhileBusy();
 	Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE);
 	Dataflash_SendAddressBytes(CurrDFPage, 0x00);
 	Dataflash_WaitWhileBusy();
 
-	/* Deselect all dataflash chips */
+	/* Deselect all Dataflash chips */
 	Dataflash_DeselectChip();
 }
 
-/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board dataflash IC(s), into
+/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board Dataflash IC(s), into
  *  the a preallocated RAM buffer. This routine reads in Dataflash page sized blocks from the Dataflash
  *  and writes them in OS sized blocks to the given buffer. This can be linked to FAT libraries to read
- *  the files stored on the dataflash.
+ *  the files stored on the Dataflash.
  *
  *  \param[in] BlockAddress  Data block starting address for the read sequence
  *  \param[in] TotalBlocks   Number of blocks of data to read
@@ -405,7 +405,7 @@ void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress,
 	/* Select the correct starting Dataflash IC for the block requested */
 	Dataflash_SelectChipFromPage(CurrDFPage);
 
-	/* Send the dataflash main memory page read command */
+	/* Send the Dataflash main memory page read command */
 	Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
 	Dataflash_SendAddressBytes(CurrDFPage, CurrDFPageByte);
 	Dataflash_SendByte(0x00);
@@ -417,20 +417,20 @@ void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress,
 	{
 		uint8_t BytesInBlockDiv16 = 0;
 		
-		/* Write an endpoint packet sized data block to the dataflash */
+		/* Write an endpoint packet sized data block to the Dataflash */
 		while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4))
 		{
-			/* Check if end of dataflash page reached */
+			/* Check if end of Dataflash page reached */
 			if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4))
 			{
-				/* Reset the dataflash buffer counter, increment the page counter */
+				/* Reset the Dataflash buffer counter, increment the page counter */
 				CurrDFPageByteDiv16 = 0;
 				CurrDFPage++;
 
-				/* Select the next dataflash chip based on the new dataflash page index */
+				/* Select the next Dataflash chip based on the new Dataflash page index */
 				Dataflash_SelectChipFromPage(CurrDFPage);
 				
-				/* Send the dataflash main memory page read command */
+				/* Send the Dataflash main memory page read command */
 				Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD);
 				Dataflash_SendAddressBytes(CurrDFPage, 0);
 				Dataflash_SendByte(0x00);
@@ -439,11 +439,11 @@ void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress,
 				Dataflash_SendByte(0x00);
 			}	
 
-			/* Read one 16-byte chunk of data from the dataflash */
+			/* Read one 16-byte chunk of data from the Dataflash */
 			for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++)
 			  *(BufferPtr++) = Dataflash_ReceiveByte();
 			
-			/* Increment the dataflash page 16 byte block counter */
+			/* Increment the Dataflash page 16 byte block counter */
 			CurrDFPageByteDiv16++;
 			
 			/* Increment the block 16 byte block counter */
@@ -454,14 +454,14 @@ void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress,
 		TotalBlocks--;
 	}
 
-	/* Deselect all dataflash chips */
+	/* Deselect all Dataflash chips */
 	Dataflash_DeselectChip();
 }
 
-/** Disables the dataflash memory write protection bits on the board Dataflash ICs, if enabled. */
+/** Disables the Dataflash memory write protection bits on the board Dataflash ICs, if enabled. */
 void DataflashManager_ResetDataflashProtections(void)
 {
-	/* Select first dataflash chip, send the read status register command */
+	/* Select first Dataflash chip, send the read status register command */
 	Dataflash_SelectChip(DATAFLASH_CHIP1);
 	Dataflash_SendByte(DF_CMD_GETSTATUS);
 	
@@ -477,7 +477,7 @@ void DataflashManager_ResetDataflashProtections(void)
 		Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]);
 	}
 	
-	/* Select second dataflash chip (if present on selected board), send read status register command */
+	/* Select second Dataflash chip (if present on selected board), send read status register command */
 	#if (DATAFLASH_TOTALCHIPS == 2)
 	Dataflash_SelectChip(DATAFLASH_CHIP2);
 	Dataflash_SendByte(DF_CMD_GETSTATUS);
@@ -495,7 +495,7 @@ void DataflashManager_ResetDataflashProtections(void)
 	}
 	#endif
 	
-	/* Deselect current dataflash chip */
+	/* Deselect current Dataflash chip */
 	Dataflash_DeselectChip();
 }
 
diff --git a/Projects/TempDataLogger/Lib/FATFs/00readme.txt b/Projects/TempDataLogger/Lib/FATFs/00readme.txt
index fa2fa84c8..a34c951c9 100644
--- a/Projects/TempDataLogger/Lib/FATFs/00readme.txt
+++ b/Projects/TempDataLogger/Lib/FATFs/00readme.txt
@@ -41,14 +41,14 @@ REVISION HISTORY
 
   Jun 01, 2006  R0.02  Added FAT12.
                        Removed unbuffered mode.
-                       Fixed a problem on small (<32M) patition.
+                       Fixed a problem on small (<32M) partition.
 
   Jun 10, 2006  R0.02a Added a configuration option _FS_MINIMUM.
 
   Sep 22, 2006  R0.03  Added f_rename.
                        Changed option _FS_MINIMUM to _FS_MINIMIZE.
 
-  Dec 11, 2006  R0.03a Improved cluster scan algolithm to write files fast.
+  Dec 11, 2006  R0.03a Improved cluster scan algorithm to write files fast.
                        Fixed f_mkdir creates incorrect directory on FAT32.
 
   Feb 04, 2007  R0.04  Supported multiple drive system. (FatFs)
@@ -56,7 +56,7 @@ REVISION HISTORY
                        Added f_mkfs. (FatFs)
                        Added _USE_FAT32 option. (Tiny-FatFs)
 
-  Apr 01, 2007  R0.04a Supported multiple partitions on a plysical drive. (FatFs)
+  Apr 01, 2007  R0.04a Supported multiple partitions on a physical drive. (FatFs)
                        Fixed an endian sensitive code in f_mkfs. (FatFs)
                        Added a capability of extending the file size to f_lseek.
                        Added minimization level 3.
diff --git a/Projects/TempDataLogger/Lib/FATFs/diskio.c b/Projects/TempDataLogger/Lib/FATFs/diskio.c
index d4f3897bb..68c2aeb97 100644
--- a/Projects/TempDataLogger/Lib/FATFs/diskio.c
+++ b/Projects/TempDataLogger/Lib/FATFs/diskio.c
@@ -8,10 +8,10 @@
 #include "diskio.h"
 
 /*-----------------------------------------------------------------------*/
-/* Inidialize a Drive                                                    */
+/* Initialize a Drive                                                    */
 
 DSTATUS disk_initialize (
-	BYTE drv				/* Physical drive nmuber (0..) */
+	BYTE drv				/* Physical drive number (0..) */
 )
 {
 	return FR_OK;
@@ -23,7 +23,7 @@ DSTATUS disk_initialize (
 /* Return Disk Status                                                    */
 
 DSTATUS disk_status (
-	BYTE drv		/* Physical drive nmuber (0..) */
+	BYTE drv		/* Physical drive number (0..) */
 )
 {
 	return FR_OK;
@@ -35,7 +35,7 @@ DSTATUS disk_status (
 /* Read Sector(s)                                                        */
 
 DRESULT disk_read (
-	BYTE drv,		/* Physical drive nmuber (0..) */
+	BYTE drv,		/* Physical drive number (0..) */
 	BYTE *buff,		/* Data buffer to store read data */
 	DWORD sector,	/* Sector address (LBA) */
 	BYTE count		/* Number of sectors to read (1..255) */
@@ -52,7 +52,7 @@ DRESULT disk_read (
 
 #if _READONLY == 0
 DRESULT disk_write (
-	BYTE drv,			/* Physical drive nmuber (0..) */
+	BYTE drv,			/* Physical drive number (0..) */
 	const BYTE *buff,	/* Data to be written */
 	DWORD sector,		/* Sector address (LBA) */
 	BYTE count			/* Number of sectors to write (1..255) */
@@ -69,7 +69,7 @@ DRESULT disk_write (
 /* Miscellaneous Functions                                               */
 
 DRESULT disk_ioctl (
-	BYTE drv,		/* Physical drive nmuber (0..) */
+	BYTE drv,		/* Physical drive number (0..) */
 	BYTE ctrl,		/* Control code */
 	void *buff		/* Buffer to send/receive control data */
 )
diff --git a/Projects/TempDataLogger/Lib/FATFs/diskio.h b/Projects/TempDataLogger/Lib/FATFs/diskio.h
index ad126712d..5feb82f83 100644
--- a/Projects/TempDataLogger/Lib/FATFs/diskio.h
+++ b/Projects/TempDataLogger/Lib/FATFs/diskio.h
@@ -1,5 +1,5 @@
 /*-----------------------------------------------------------------------
-/  Low level disk interface modlue include file  R0.07   (C)ChaN, 2010
+/  Low level disk interface module include file  R0.07   (C)ChaN, 2010
 /-----------------------------------------------------------------------*/
 
 #ifndef _DISKIO
diff --git a/Projects/TempDataLogger/Lib/FATFs/ff.c b/Projects/TempDataLogger/Lib/FATFs/ff.c
index 236c86fbc..7f4cd25fb 100644
--- a/Projects/TempDataLogger/Lib/FATFs/ff.c
+++ b/Projects/TempDataLogger/Lib/FATFs/ff.c
@@ -1593,7 +1593,7 @@ FRESULT follow_path (	/* FR_OK(0): successful, !=0: error code */
 			res = dir_find(dj);				/* Find it */
 			ns = *(dj->fn+NS);
 			if (res != FR_OK) {				/* Failed to find the object */
-				if (res != FR_NO_FILE) break;	/* Abort if any hard error occured */
+				if (res != FR_NO_FILE) break;	/* Abort if any hard error occurred */
 				/* Object not found */
 				if (_FS_RPATH && (ns & NS_DOT)) {	/* If dot entry is not exit */
 					dj->sclust = 0; dj->dir = 0;	/* It is the root dir */
@@ -1710,7 +1710,7 @@ FRESULT chk_mounted (	/* FR_OK(0): successful, !=0: any error occurred */
 	if (chk_wp && (stat & STA_PROTECT))	/* Check disk write protection if needed */
 		return FR_WRITE_PROTECTED;
 #endif
-	/* Search FAT partition on the drive (Supports only generic partitionings, FDISK and SFD) */
+	/* Search FAT partition on the drive (Supports only generic partitions, FDISK and SFD) */
 	fmt = check_fs(fs, bsect = 0);		/* Check sector 0 if it is a VBR */
 	if (fmt == 1) {						/* Not an FAT-VBR, the disk may be partitioned */
 		/* Check the partition listed in top of the partition table */
@@ -2569,7 +2569,7 @@ FRESULT f_opendir (
 
 
 /*-----------------------------------------------------------------------*/
-/* Read Directory Entry in Sequense                                      */
+/* Read Directory Entry in Sequence                                      */
 /*-----------------------------------------------------------------------*/
 
 FRESULT f_readdir (
@@ -2943,7 +2943,7 @@ FRESULT f_chmod (
 
 
 /*-----------------------------------------------------------------------*/
-/* Change Timestamp                                                      */
+/* Change Time-stamp                                                      */
 /*-----------------------------------------------------------------------*/
 
 FRESULT f_utime (
@@ -3361,18 +3361,18 @@ TCHAR* f_gets (
 #if _LFN_UNICODE					/* Read a character in UTF-8 encoding */
 		if (c >= 0x80) {
 			if (c < 0xC0) continue;	/* Skip stray trailer */
-			if (c < 0xE0) {			/* Two-byte sequense */
+			if (c < 0xE0) {			/* Two-byte sequence */
 				f_read(fil, s, 1, &rc);
 				if (rc != 1) break;
 				c = ((c & 0x1F) << 6) | (s[0] & 0x3F);
 				if (c < 0x80) c = '?';
 			} else {
-				if (c < 0xF0) {		/* Three-byte sequense */
+				if (c < 0xF0) {		/* Three-byte sequence */
 					f_read(fil, s, 2, &rc);
 					if (rc != 2) break;
 					c = (c << 12) | ((s[0] & 0x3F) << 6) | (s[1] & 0x3F);
 					if (c < 0x800) c = '?';
-				} else {			/* Reject four-byte sequense */
+				} else {			/* Reject four-byte sequence */
 					c = '?';
 				}
 			}
@@ -3510,7 +3510,7 @@ int f_printf (
 		case 'D' :					/* Signed decimal */
 		case 'U' :					/* Unsigned decimal */
 			r = 10; break;
-		case 'X' :					/* Hexdecimal */
+		case 'X' :					/* Hexadecimal */
 			r = 16; break;
 		default:					/* Unknown */
 			cc = f_putc(c, fil); continue;
diff --git a/Projects/TempDataLogger/Lib/FATFs/ffconf.h b/Projects/TempDataLogger/Lib/FATFs/ffconf.h
index cddced6cb..1087c3a0e 100644
--- a/Projects/TempDataLogger/Lib/FATFs/ffconf.h
+++ b/Projects/TempDataLogger/Lib/FATFs/ffconf.h
@@ -113,7 +113,7 @@
 #define _FS_RPATH	0		/* 0:Disable or 1:Enable */
 /* When _FS_RPATH is set to 1, relative path feature is enabled and f_chdir,
 /  f_chdrive function are available.
-/  Note that output of the f_readdir fnction is affected by this option. */
+/  Note that output of the f_readdir function is affected by this option. */
 
 
 
@@ -129,13 +129,13 @@
 /* Maximum sector size to be handled.
 /  Always set 512 for memory card and hard disk but a larger value may be
 /  required for floppy disk (512/1024) and optical disk (512/2048).
-/  When _MAX_SS is larger than 512, GET_SECTOR_SIZE command must be implememted
+/  When _MAX_SS is larger than 512, GET_SECTOR_SIZE command must be implemented
 /  to the disk_ioctl function. */
 
 
-#define	_MULTI_PARTITION	0	/* 0:Single parition or 1:Multiple partition */
+#define	_MULTI_PARTITION	0	/* 0:Single partition or 1:Multiple partition */
 /* When _MULTI_PARTITION is set to 0, each volume is bound to the same physical
-/ drive number and can mount only first primaly partition. When it is set to 1,
+/ drive number and can mount only first primary partition. When it is set to 1,
 / each volume is tied to the partitions listed in Drives[]. */
 
 
@@ -161,7 +161,7 @@
 #define _FS_TIMEOUT		1000	/* Timeout period in unit of time ticks */
 #define	_SYNC_t			HANDLE	/* O/S dependent type of sync object. e.g. HANDLE, OS_EVENT*, ID and etc.. */
 /* Include a header file here to define O/S system calls */
-/* #include <windows.h>, <ucos_ii.h.h>, <semphr.h> or ohters. */
+/* #include <windows.h>, <ucos_ii.h.h>, <semphr.h> or others. */
 
 /* The _FS_REENTRANT option switches the reentrancy of the FatFs module.
 /
@@ -172,7 +172,7 @@
 
 
 #define	_FS_SHARE	0	/* 0:Disable or >=1:Enable */
-/* To enable file shareing feature, set _FS_SHARE to >= 1 and also user
+/* To enable file sharing feature, set _FS_SHARE to >= 1 and also user
    provided memory handlers, ff_memalloc and ff_memfree function must be
    added to the project. The value defines number of files can be opened
    per volume. */
diff --git a/Projects/TempDataLogger/Lib/SCSI.c b/Projects/TempDataLogger/Lib/SCSI.c
index 390441aa1..6923f7819 100644
--- a/Projects/TempDataLogger/Lib/SCSI.c
+++ b/Projects/TempDataLogger/Lib/SCSI.c
@@ -241,7 +241,7 @@ static void SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* const MSInte
 }
 
 /** Command processing for an issued SCSI READ (10) or WRITE (10) command. This command reads in the block start address
- *  and total number of blocks to process, then calls the appropriate low-level dataflash routine to handle the actual
+ *  and total number of blocks to process, then calls the appropriate low-level Dataflash routine to handle the actual
  *  reading and writing of the data.
  *
  *  \param[in] MSInterfaceInfo  Pointer to the Mass Storage class interface structure that the command is associated with
diff --git a/Projects/TempDataLogger/TempDataLogger.c b/Projects/TempDataLogger/TempDataLogger.c
index 7d88ba7bf..d26871bcc 100644
--- a/Projects/TempDataLogger/TempDataLogger.c
+++ b/Projects/TempDataLogger/TempDataLogger.c
@@ -89,7 +89,7 @@ uint8_t LoggingInterval500MS_SRAM;
 /** Total number of 500ms logging ticks elapsed since the last log value was recorded */
 uint16_t CurrentLoggingTicks;
 
-/** FAT Fs structure to hold the internal state of the FAT driver for the dataflash contents. */
+/** FAT Fs structure to hold the internal state of the FAT driver for the Dataflash contents. */
 FATFS DiskFATState;
 
 /** FAT Fs structure to hold a FAT file handle for the log data write destination. */
@@ -146,7 +146,7 @@ int main(void)
 	if (LoggingInterval500MS_SRAM == 0xFF)
 	  LoggingInterval500MS_SRAM = DEFAULT_LOG_INTERVAL;
 
-	/* Mount and open the log file on the dataflash FAT partition */
+	/* Mount and open the log file on the Dataflash FAT partition */
 	OpenLogFile();
 
 	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
@@ -230,7 +230,7 @@ void EVENT_USB_Device_Disconnect(void)
 {
 	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
 	
-	/* Mount and open the log file on the dataflash FAT partition */
+	/* Mount and open the log file on the Dataflash FAT partition */
 	OpenLogFile();
 }
 
diff --git a/Projects/TempDataLogger/TemperatureDataLogger.txt b/Projects/TempDataLogger/TemperatureDataLogger.txt
index d5a44ad6e..a3729a63d 100644
--- a/Projects/TempDataLogger/TemperatureDataLogger.txt
+++ b/Projects/TempDataLogger/TemperatureDataLogger.txt
@@ -67,7 +67,7 @@
  *
  *  \section SSec_Options Project Options
  *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *  The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value.
  *
  *  <table>
  *   <tr>