Add svn:eol-style property to source files, so that the line endings are correctly converted to the target system's native end of line style.

1 files changed, 81 insertions, 81 deletions

diff --git a/Projects/USBtoSerial/USBtoSerial.txt b/Projects/USBtoSerial/USBtoSerial.txt
index 10f0003c6..e10b359bd 100644
--- a/Projects/USBtoSerial/USBtoSerial.txt
+++ b/Projects/USBtoSerial/USBtoSerial.txt
@@ -1,82 +1,82 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

- 

-/** \mainpage USB to Serial Converter Project

- *

- *  \section SSec_Compat Project Compatibility:

- *

- *  The following list indicates what microcontrollers are compatible with this project.

- *

- *  - Series 7 USB AVRs

- *  - Series 6 USB AVRs

- *  - Series 4 USB AVRs

- *  - Series 2 USB AVRs

- *

- *  \section SSec_Info USB Information:

- *

- *  The following table gives a rundown of the USB utilization of this project.

- *

- *  <table>

- *   <tr>

- *    <td><b>USB Mode:</b></td>

- *    <td>Device</td>

- *   </tr>

- *   <tr>

- *    <td><b>USB Class:</b></td>

- *    <td>Communications Device Class (CDC)</td>

- *   </tr>

- *   <tr> 

- *    <td><b>USB Subclass:</b></td>

- *    <td>Abstract Control Model (ACM)</td>

- *   </tr>

- *   <tr>

- *    <td><b>Relevant Standards:</b></td>

- *    <td>USBIF CDC Class Standard</td>

- *   </tr>

- *   <tr>

- *    <td><b>Usable Speeds:</b></td>

- *    <td>Full Speed Mode</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_Description Project Description: 

- *

- *  USB to Serial bridge project. This project allows a USB AVR to serve

- *  as a USB to USART bridge between a USB host and a device lacking a

- *  USB port. When programmed into a USB AVR, the AVR will enumerate as a

- *  virtual COM port.

- *

- *  The AVR's hardware USART's settings will change to mirror as closely as

- *  possible the serial settings set on the host. However, due to hardware

- *  limitations, some options may not be supported (baud rates with unacceptable

- *  error rates at the AVR's clock speed, data lengths other than 6, 7 or 8 bits,

- *  1.5 stop bits, parity other than none, even or odd).

- *  

- *  After running this project for the first time on a new computer,

- *  you will need to supply the .INF file located in this project

- *  project's directory as the device's driver when running under

- *  Windows. This will enable Windows to use its inbuilt CDC drivers,

- *  negating the need for custom drivers for the device. Other

- *  Operating Systems should automatically use their own inbuilt

- *  CDC-ACM drivers.

- *

- *  \section SSec_Options Project Options

- *

- *  The following defines can be found in this project, which can control the project behaviour when defined, or changed in value.

- *

- *  <table>

- *   <tr>

- *    <td><b>Define Name:</b></td>

- *    <td><b>Location:</b></td>

- *    <td><b>Description:</b></td>

- *   </tr>

- *   <tr>

- *    <td>BUFF_STATICSIZE</td>

- *    <td>RingBuff.h</td>

- *    <td>Defines the maximum number of bytes which can be buffered in each Ring Buffer.</td>

- *   </tr>

- *  </table>

+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+ 
+/** \mainpage USB to Serial Converter Project
+ *
+ *  \section SSec_Compat Project Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this project.
+ *
+ *  - Series 7 USB AVRs
+ *  - Series 6 USB AVRs
+ *  - Series 4 USB AVRs
+ *  - Series 2 USB AVRs
+ *
+ *  \section SSec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this project.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Communications Device Class (CDC)</td>
+ *   </tr>
+ *   <tr> 
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>Abstract Control Model (ACM)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>USBIF CDC Class Standard</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Usable Speeds:</b></td>
+ *    <td>Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_Description Project Description: 
+ *
+ *  USB to Serial bridge project. This project allows a USB AVR to serve
+ *  as a USB to USART bridge between a USB host and a device lacking a
+ *  USB port. When programmed into a USB AVR, the AVR will enumerate as a
+ *  virtual COM port.
+ *
+ *  The AVR's hardware USART's settings will change to mirror as closely as
+ *  possible the serial settings set on the host. However, due to hardware
+ *  limitations, some options may not be supported (baud rates with unacceptable
+ *  error rates at the AVR's clock speed, data lengths other than 6, 7 or 8 bits,
+ *  1.5 stop bits, parity other than none, even or odd).
+ *  
+ *  After running this project for the first time on a new computer,
+ *  you will need to supply the .INF file located in this project
+ *  project's directory as the device's driver when running under
+ *  Windows. This will enable Windows to use its inbuilt CDC drivers,
+ *  negating the need for custom drivers for the device. Other
+ *  Operating Systems should automatically use their own inbuilt
+ *  CDC-ACM drivers.
+ *
+ *  \section SSec_Options Project Options
+ *
+ *  The following defines can be found in this project, which can control the project behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>Define Name:</b></td>
+ *    <td><b>Location:</b></td>
+ *    <td><b>Description:</b></td>
+ *   </tr>
+ *   <tr>
+ *    <td>BUFF_STATICSIZE</td>
+ *    <td>RingBuff.h</td>
+ *    <td>Defines the maximum number of bytes which can be buffered in each Ring Buffer.</td>
+ *   </tr>
+ *  </table>
  */
\ No newline at end of file