diff options
author | Dean Camera <dean@fourwalledcubicle.com> | 2009-08-19 07:08:27 +0000 |
---|---|---|
committer | Dean Camera <dean@fourwalledcubicle.com> | 2009-08-19 07:08:27 +0000 |
commit | 32cc2b8d4d9f2c66a9dbfa859f476c077592e2cf (patch) | |
tree | d32e2e00a11366359599775f8ee337167d22d46e /Projects/Unfinished | |
parent | 04354ffcadfebb0d1c5bd010cf126ae3c126f231 (diff) | |
download | lufa-32cc2b8d4d9f2c66a9dbfa859f476c077592e2cf.tar.gz lufa-32cc2b8d4d9f2c66a9dbfa859f476c077592e2cf.tar.bz2 lufa-32cc2b8d4d9f2c66a9dbfa859f476c077592e2cf.zip |
Reorganise V2Protocol.c, add in function to assert or de-assert target RESET pin.
Diffstat (limited to 'Projects/Unfinished')
-rw-r--r-- | Projects/Unfinished/AVRISP/AVRISP.c | 4 | ||||
-rw-r--r-- | Projects/Unfinished/AVRISP/AVRISP.txt | 8 | ||||
-rw-r--r-- | Projects/Unfinished/AVRISP/Lib/V2Protocol.c | 188 | ||||
-rw-r--r-- | Projects/Unfinished/AVRISP/Lib/V2Protocol.h | 24 | ||||
-rw-r--r-- | Projects/Unfinished/AVRISP/makefile | 1 |
5 files changed, 132 insertions, 93 deletions
diff --git a/Projects/Unfinished/AVRISP/AVRISP.c b/Projects/Unfinished/AVRISP/AVRISP.c index 9826dbbd7..e937253e3 100644 --- a/Projects/Unfinished/AVRISP/AVRISP.c +++ b/Projects/Unfinished/AVRISP/AVRISP.c @@ -42,8 +42,8 @@ int main(void)
{
SetupHardware();
-
- V2Protocol_ConfigureHardware();
+
+ V2Protocol_Init();
printf("AVRISP-MKII Clone\r\n");
diff --git a/Projects/Unfinished/AVRISP/AVRISP.txt b/Projects/Unfinished/AVRISP/AVRISP.txt index 0eb26f4e9..6ab346c2c 100644 --- a/Projects/Unfinished/AVRISP/AVRISP.txt +++ b/Projects/Unfinished/AVRISP/AVRISP.txt @@ -55,9 +55,6 @@ * This device spoofs Atmel's official AVRISP-MKII device PID so that it remains compatible with Atmel's AVRISP-MKII
* drivers. When promted, direct your OS to install Atmel's AVRISP-MKII drivers provided with AVRStudio.
*
- * This demo contains both FLASH and EEPROM data, as compiled .HEX and .EEP files respectively. <b>Both</b> files must
- * be loaded into the device for it to perform correctly.
- *
* \section SSec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
@@ -74,11 +71,6 @@ * <td>PORT register for the programmer's target RESET line.</td>
* </tr>
* <tr>
- * <td>RESET_LINE_PIN</td>
- * <td>Makefile CDEFS</td>
- * <td>PIN register for the programmer's target RESET line.</td>
- * </tr>
- * <tr>
* <td>RESET_LINE_DDR</td>
* <td>Makefile CDEFS</td>
* <td>DDR register for the programmer's target RESET line.</td>
diff --git a/Projects/Unfinished/AVRISP/Lib/V2Protocol.c b/Projects/Unfinished/AVRISP/Lib/V2Protocol.c index 27f6fa7dc..905214c6d 100644 --- a/Projects/Unfinished/AVRISP/Lib/V2Protocol.c +++ b/Projects/Unfinished/AVRISP/Lib/V2Protocol.c @@ -36,47 +36,108 @@ #define INCLUDE_FROM_V2PROTOCOL_C
#include "V2Protocol.h"
-ParameterItem_t ParameterTable[] EEMEM =
+/* Table of masks for SPI_Init() from a given PARAM_SCK_DURATION value */
+static const uint8_t SPIMaskFromSCKDuration[] =
+ {
+ #if (F_CPU == 8000000)
+ SPI_SPEED_FCPU_DIV_2,
+ #endif
+ SPI_SPEED_FCPU_DIV_2, SPI_SPEED_FCPU_DIV_4, SPI_SPEED_FCPU_DIV_8,
+ SPI_SPEED_FCPU_DIV_16, SPI_SPEED_FCPU_DIV_32, SPI_SPEED_FCPU_DIV_64
+ #if (F_CPU == 16000000)
+ , SPI_SPEED_FCPU_DIV_128
+ #endif
+ };
+
+/* Non-Volatile Parameter Values for EEPROM storage */
+uint8_t EEMEM EEPROM_Rest_Polarity;
+
+/* Volatile Parameter Values for RAM storage */
+static ParameterItem_t ParameterTable[] =
{
{ .ParameterID = PARAM_BUILD_NUMBER_LOW,
- .ParameterValue = 0x00 },
+ .ParameterValue = (LUFA_VERSION_INTEGER >> 8) },
{ .ParameterID = PARAM_BUILD_NUMBER_HIGH,
- .ParameterValue = 0x00 },
+ .ParameterValue = (LUFA_VERSION_INTEGER & 0xFF) },
{ .ParameterID = PARAM_HW_VER,
- .ParameterValue = 0x01 },
+ .ParameterValue = 0x01 },
{ .ParameterID = PARAM_SW_MAJOR,
- .ParameterValue = 0x01 },
+ .ParameterValue = 0x01 },
{ .ParameterID = PARAM_SW_MINOR,
- .ParameterValue = 0x00 },
+ .ParameterValue = 0x00 },
{ .ParameterID = PARAM_VTARGET,
- .ParameterValue = 0x00 },
+ .ParameterValue = 0x00 },
{ .ParameterID = PARAM_SCK_DURATION,
- .ParameterValue = 0x00 },
+ .ParameterValue = sizeof(SPIMaskFromSCKDuration) },
{ .ParameterID = PARAM_RESET_POLARITY,
- .ParameterValue = 0x00 },
+ .ParameterValue = 0x01 },
{ .ParameterID = PARAM_STATUS_TGT_CONN,
- .ParameterValue = 0x00 },
+ .ParameterValue = 0x00 },
{ .ParameterID = PARAM_DISCHARGEDELAY,
- .ParameterValue = 0x00 },
+ .ParameterValue = 0x00 },
};
-
-void V2Protocol_ConfigureHardware(void)
+
+
+static void V2Protocol_ReconfigureSPI(void)
{
-#if F_CPU == 8000000
- uint8_t SPIMaskFromSCKDuration[] = {SPI_SPEED_FCPU_DIV_128, SPI_SPEED_FCPU_DIV_128, SPI_SPEED_FCPU_DIV_128,
- SPI_SPEED_FCPU_DIV_128, SPI_SPEED_FCPU_DIV_128, SPI_SPEED_FCPU_DIV_128};
-#else
- uint8_t SPIMaskFromSCKDuration[] = {SPI_SPEED_FCPU_DIV_128, SPI_SPEED_FCPU_DIV_128, SPI_SPEED_FCPU_DIV_128,
- SPI_SPEED_FCPU_DIV_128, SPI_SPEED_FCPU_DIV_128, SPI_SPEED_FCPU_DIV_128};
-#endif
-
- uint8_t SCKDuration = eeprom_read_byte(&V2Protocol_GetParameterItem(PARAM_SCK_DURATION)->ParameterValue);
-
- if (SCKDuration > sizeof(SPIMaskFromSCKDuration))
- SCKDuration = SPIMaskFromSCKDuration;
+ uint8_t SCKDuration = V2Protocol_GetParameter(PARAM_SCK_DURATION);
+
+ if (SCKDuration >= sizeof(SPIMaskFromSCKDuration))
+ SCKDuration = (sizeof(SPIMaskFromSCKDuration) - 1);
SPI_Init(SPIMaskFromSCKDuration[SCKDuration], true);
}
+
+static void V2Protocol_ChangeTargetResetLine(bool ResetTarget)
+{
+ if (ResetTarget)
+ {
+ RESET_LINE_DDR |= RESET_LINE_MASK;
+
+ if (!(V2Protocol_GetParameter(PARAM_RESET_POLARITY)))
+ RESET_LINE_PORT |= RESET_LINE_MASK;
+ }
+ else
+ {
+ RESET_LINE_PORT &= ~RESET_LINE_MASK;
+ RESET_LINE_DDR &= ~RESET_LINE_MASK;
+ }
+}
+
+static uint8_t V2Protocol_GetParameter(uint8_t ParamID)
+{
+ /* Find the parameter in the parameter table and retrieve the value */
+ for (uint8_t TableIndex = 0; TableIndex < (sizeof(ParameterTable) / sizeof(ParameterTable[0])); TableIndex++)
+ {
+ if (ParamID == ParameterTable[TableIndex].ParameterID)
+ return ParameterTable[TableIndex].ParameterValue;
+ }
+
+ return 0;
+}
+
+static void V2Protocol_SetParameter(uint8_t ParamID, uint8_t Value)
+{
+ /* The target RESET line polarity is a non-volatile parameter, save to EEPROM when changed */
+ if (ParamID == PARAM_RESET_POLARITY)
+ eeprom_write_byte(&EEPROM_Rest_Polarity, Value);
+
+ /* Find the parameter in the parameter table and store the new value */
+ for (uint8_t TableIndex = 0; TableIndex < (sizeof(ParameterTable) / sizeof(ParameterTable[0])); TableIndex++)
+ {
+ if (ParamID == ParameterTable[TableIndex].ParameterID)
+ {
+ ParameterTable[TableIndex].ParameterValue = Value;
+ return;
+ }
+ }
+}
+
+void V2Protocol_Init(void)
+{
+ /* Target RESET line polarity is a non-volatile value, retrieve current parameter value from EEPROM */
+ V2Protocol_SetParameter(PARAM_RESET_POLARITY, eeprom_read_byte(&EEPROM_Rest_Polarity));
+}
void V2Protocol_ProcessCommand(void) { @@ -85,28 +146,17 @@ void V2Protocol_ProcessCommand(void) switch (V2Command)
{
case CMD_SIGN_ON:
- V2Protocol_ProcessCmdSignOn();
+ V2Protocol_Command_SignOn();
break;
case CMD_SET_PARAMETER:
case CMD_GET_PARAMETER:
- V2Protocol_ProcessCmdGetSetParam(V2Command);
+ V2Protocol_Command_GetSetParam(V2Command);
break;
case CMD_SPI_MULTI:
- V2Protocol_ProcessCmdSPIMulti();
+ V2Protocol_Command_SPIMulti();
break;
default:
- while (Endpoint_BytesInEndpoint() == AVRISP_DATA_EPSIZE)
- {
- Endpoint_ClearOUT();
- while (!(Endpoint_IsOUTReceived()));
- }
-
- Endpoint_ClearOUT();
- Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
- Endpoint_Write_Byte(V2Command);
- Endpoint_Write_Byte(STATUS_CMD_UNKNOWN);
- Endpoint_ClearIN();
+ V2Protocol_Command_Unknown(V2Command);
break;
}
@@ -114,26 +164,31 @@ void V2Protocol_ProcessCommand(void) Endpoint_WaitUntilReady();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_OUT); -}
+} -static ParameterItem_t* V2Protocol_GetParameterItem(uint8_t ParamID)
-{
- for (uint8_t TableIndex = 0; TableIndex < (sizeof(ParameterTable) / sizeof(ParameterTable[0])); TableIndex++)
+static void V2Protocol_Command_Unknown(uint8_t V2Command)
+{
+ while (Endpoint_BytesInEndpoint() == AVRISP_DATA_EPSIZE)
{
- if (ParamID == eeprom_read_byte(&ParameterTable[TableIndex].ParameterID))
- return &ParameterTable[TableIndex];
+ Endpoint_ClearOUT();
+ while (!(Endpoint_IsOUTReceived()));
}
-
- return NULL;
-} +
+ Endpoint_ClearOUT();
+ Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
+
+ Endpoint_Write_Byte(V2Command);
+ Endpoint_Write_Byte(STATUS_CMD_UNKNOWN);
+ Endpoint_ClearIN();
+}
-static void V2Protocol_ProcessCmdSignOn(void)
+static void V2Protocol_Command_SignOn(void)
{
Endpoint_ClearOUT();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
Endpoint_WaitUntilReady();
- V2Protocol_ConfigureHardware();
+ V2Protocol_ReconfigureSPI();
Endpoint_Write_Byte(CMD_SIGN_ON);
Endpoint_Write_Byte(STATUS_CMD_OK);
@@ -142,7 +197,7 @@ static void V2Protocol_ProcessCmdSignOn(void) Endpoint_ClearIN();
}
-static void V2Protocol_ProcessCmdGetSetParam(uint8_t V2Command)
+static void V2Protocol_Command_GetSetParam(uint8_t V2Command)
{
uint8_t ParamID = Endpoint_Read_Byte();
uint8_t ParamValue = Endpoint_Read_Byte();
@@ -151,28 +206,18 @@ static void V2Protocol_ProcessCmdGetSetParam(uint8_t V2Command) Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
Endpoint_WaitUntilReady();
- ParameterItem_t* ParameterItem = V2Protocol_GetParameterItem(ParamID);
-
Endpoint_Write_Byte(V2Command);
+ Endpoint_Write_Byte(STATUS_CMD_OK);
- if (ParameterItem != NULL)
- {
- Endpoint_Write_Byte(STATUS_CMD_OK);
-
- if (V2Command == CMD_SET_PARAMETER)
- eeprom_write_byte(&ParameterItem->ParameterValue, ParamValue);
- else
- Endpoint_Write_Byte(eeprom_read_byte(&ParameterItem->ParameterValue));
- }
+ if (V2Command == CMD_SET_PARAMETER)
+ V2Protocol_SetParameter(ParamID, ParamValue);
else
- {
- Endpoint_Write_Byte(STATUS_CMD_FAILED);
- }
+ Endpoint_Write_Byte(V2Protocol_GetParameter(ParamID));
Endpoint_ClearIN();
}
-static void V2Protocol_ProcessCmdSPIMulti(void)
+static void V2Protocol_Command_SPIMulti(void)
{
uint8_t TxBytes = Endpoint_Read_Byte();
uint8_t RxBytes = Endpoint_Read_Byte();
@@ -204,14 +249,9 @@ static void V2Protocol_ProcessCmdSPIMulti(void) while (CurrRxPos < RxBytes)
{
if (CurrTxPos < TxBytes)
- {
- Endpoint_Write_Byte(SPI_TransferByte(TxData[CurrTxPos]));
- CurrTxPos++;
- }
+ Endpoint_Write_Byte(SPI_TransferByte(TxData[CurrTxPos++]));
else
- {
- Endpoint_Write_Byte(SPI_ReceiveByte());
- }
+ Endpoint_Write_Byte(SPI_ReceiveByte());
CurrRxPos++;
}
diff --git a/Projects/Unfinished/AVRISP/Lib/V2Protocol.h b/Projects/Unfinished/AVRISP/Lib/V2Protocol.h index 6c2ff606d..7b9f1b12f 100644 --- a/Projects/Unfinished/AVRISP/Lib/V2Protocol.h +++ b/Projects/Unfinished/AVRISP/Lib/V2Protocol.h @@ -37,8 +37,10 @@ #define _V2_PROTOCOL_ /* Includes: */ - #include <avr/io.h> - + #include <avr/io.h>
+ #include <avr/eeprom.h> +
+ #include <LUFA/Version.h> #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/Peripheral/SPI.h>
@@ -56,15 +58,21 @@ uint8_t ParameterValue;
} ParameterItem_t; - /* Function Prototypes: */
- void V2Protocol_ConfigureHardware(void); + /* Function Prototypes: */
+ void V2Protocol_Init(void);
void V2Protocol_ProcessCommand(void);
#if defined(INCLUDE_FROM_V2PROTOCOL_C)
- static ParameterItem_t* V2Protocol_GetParameterItem(uint8_t ParamID);
- static void V2Protocol_ProcessCmdSignOn(void);
- static void V2Protocol_ProcessCmdGetSetParam(uint8_t V2Command);
- static void V2Protocol_ProcessCmdSPIMulti(void);
+ static void V2Protocol_ReconfigureSPI(void);
+ static void V2Protocol_ChangeTargetResetLine(bool ResetTarget);
+
+ static uint8_t V2Protocol_GetParameter(uint8_t ParamID);
+ static void V2Protocol_SetParameter(uint8_t ParamID, uint8_t Value);
+
+ static void V2Protocol_Command_Unknown(uint8_t V2Command);
+ static void V2Protocol_Command_SignOn(void);
+ static void V2Protocol_Command_GetSetParam(uint8_t V2Command);
+ static void V2Protocol_Command_SPIMulti(void);
#endif #endif diff --git a/Projects/Unfinished/AVRISP/makefile b/Projects/Unfinished/AVRISP/makefile index 0877c5d77..d2128dcf3 100644 --- a/Projects/Unfinished/AVRISP/makefile +++ b/Projects/Unfinished/AVRISP/makefile @@ -194,7 +194,6 @@ CSTANDARD = -std=gnu99 # Place -D or -U options here for C sources
CDEFS = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)
CDEFS += -DRESET_LINE_PORT=PORTA
-CDEFS += -DRESET_LINE_PIN=PINA
CDEFS += -DRESET_LINE_DDR=DDRA
CDEFS += -DRESET_LINE_MASK="(1 << 0)"
|