diff options
author | Dean Camera <dean@fourwalledcubicle.com> | 2010-07-29 16:20:45 +0000 |
---|---|---|
committer | Dean Camera <dean@fourwalledcubicle.com> | 2010-07-29 16:20:45 +0000 |
commit | 28401f7bb749350a66ebe95649d01a25c01842f7 (patch) | |
tree | eff8174e307ea39ee7c1351fde7c23f0f33faf6c /Projects/XPLAINBridge/XPLAINBridge.txt | |
parent | ca007f91f2aa959a738649d35becb54cb1efc8b8 (diff) | |
download | lufa-28401f7bb749350a66ebe95649d01a25c01842f7.tar.gz lufa-28401f7bb749350a66ebe95649d01a25c01842f7.tar.bz2 lufa-28401f7bb749350a66ebe95649d01a25c01842f7.zip |
Spell check all source files once again to find any typos.
Diffstat (limited to 'Projects/XPLAINBridge/XPLAINBridge.txt')
-rw-r--r-- | Projects/XPLAINBridge/XPLAINBridge.txt | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/Projects/XPLAINBridge/XPLAINBridge.txt b/Projects/XPLAINBridge/XPLAINBridge.txt index e60ff783e..766dbf2d4 100644 --- a/Projects/XPLAINBridge/XPLAINBridge.txt +++ b/Projects/XPLAINBridge/XPLAINBridge.txt @@ -47,7 +47,7 @@ * \section SSec_Description Project Description: * * This project serves a dual purpose. When loaded into the USB AVR on the XPLAIN board, it will act as either a USB to Serial - * converter for the XPLAIN's hardware USART (at a speed of 9600 baud), or an AVRStudio compaible PDI programmer for the XMEGA. + * converter for the XPLAIN's hardware USART (at a speed of 9600 baud), or an AVRStudio compatible PDI programmer for the XMEGA. * This project replaces the firmware preloaded onto the XPLAIN's onboard AT90USB1287 microcontroller. * * When power to the board is applied, the TDI pin (pin 9) of the USB AVR's JTAG port is read. If the pin is left high, the device @@ -70,7 +70,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this project, which can control the project behaviour when defined, or changed in value. + * The following defines can be found in this project, which can control the project behavior when defined, or changed in value. * * <table> * <tr> @@ -90,4 +90,4 @@ * the code compatible with software such as avrdude (all platforms) that use the libUSB driver. * </tr> * </table> - */
\ No newline at end of file + */ |