Spell check code and manual pages. Remove custom Doxygen CSS stylesheet, as the new 1.7 Doxygen's default stylesheet is much better.

3 files changed, 4 insertions, 4 deletions

diff --git a/Projects/XPLAINBridge/Lib/SoftUART.c b/Projects/XPLAINBridge/Lib/SoftUART.c
index 81f023740..a23ea456d 100644
--- a/Projects/XPLAINBridge/Lib/SoftUART.c
+++ b/Projects/XPLAINBridge/Lib/SoftUART.c
@@ -54,12 +54,12 @@ static uint8_t RX_Data;
 /** Initializes the software UART, ready for data transmission and reception into the global ring buffers. */
 void SoftUART_Init(void)
 {
-	/* Set TX pin to output high, enable RX pullup */
+	/* Set TX pin to output high, enable RX pull-up */
 	STXPORT |= (1 << STX);
 	STXDDR  |= (1 << STX);
 	SRXPORT |= (1 << SRX);
 
-	/* Enable INT0 for the detection of incomming start bits that signal the start of a byte */
+	/* Enable INT0 for the detection of incoming start bits that signal the start of a byte */
 	EICRA  = (1 << ISC01);
 	EIMSK  = (1 << INT0);
 
diff --git a/Projects/XPLAINBridge/USARTDescriptors.c b/Projects/XPLAINBridge/USARTDescriptors.c
index 1929e4f29..329a20627 100644
--- a/Projects/XPLAINBridge/USARTDescriptors.c
+++ b/Projects/XPLAINBridge/USARTDescriptors.c
@@ -218,7 +218,7 @@ USB_Descriptor_String_t PROGMEM USART_ProductString =
 	.UnicodeString          = L"LUFA XPLAIN Bridge"
 };
 
-/** Descriptior retrieval function for the USART Bridge descriptors. This function is in turn called by the GetDescriptor
+/** Descriptor retrieval function for the USART Bridge descriptors. This function is in turn called by the GetDescriptor
  *  callback function in the main source file, to retrieve the device's descriptors when in USART bridge mode.
  */
 uint16_t USART_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, void** const DescriptorAddress)
diff --git a/Projects/XPLAINBridge/XPLAINBridge.c b/Projects/XPLAINBridge/XPLAINBridge.c
index 35a3951f4..ad3fc6c95 100644
--- a/Projects/XPLAINBridge/XPLAINBridge.c
+++ b/Projects/XPLAINBridge/XPLAINBridge.c
@@ -156,7 +156,7 @@ void SetupHardware(void)
 	MCUCR |= (1 << JTD);
 	MCUCR |= (1 << JTD);
 
-	/* Enable pullup on the JTAG TDI pin so we can use it to select the mode */
+	/* Enable pull-up on the JTAG TDI pin so we can use it to select the mode */
 	PORTF |= (1 << 7);
 	_delay_ms(10);