diff options
author | Dean Camera <dean@fourwalledcubicle.com> | 2009-12-02 13:42:08 +0000 |
---|---|---|
committer | Dean Camera <dean@fourwalledcubicle.com> | 2009-12-02 13:42:08 +0000 |
commit | 1f8dfd0205d431351425f468627984280b21cd5a (patch) | |
tree | c4db194265aeb65ad2b1965081788fa456b84ef0 /Projects | |
parent | 5930f47bf4b9b4490daf80d44595ff14ee7ce165 (diff) | |
download | lufa-1f8dfd0205d431351425f468627984280b21cd5a.tar.gz lufa-1f8dfd0205d431351425f468627984280b21cd5a.tar.bz2 lufa-1f8dfd0205d431351425f468627984280b21cd5a.zip |
Add support for unwrapping of the XMEGA PDI programming protocol to the AVRISP Programmer project.
Diffstat (limited to 'Projects')
-rw-r--r-- | Projects/AVRISP/AVRISP.c | 1 | ||||
-rw-r--r-- | Projects/AVRISP/AVRISP.h | 1 | ||||
-rw-r--r-- | Projects/AVRISP/AVRISP.txt | 14 | ||||
-rw-r--r-- | Projects/AVRISP/Lib/ISPProtocol.c | 5 | ||||
-rw-r--r-- | Projects/AVRISP/Lib/PDIProtocol.c | 262 | ||||
-rw-r--r-- | Projects/AVRISP/Lib/PDIProtocol.h | 100 | ||||
-rw-r--r-- | Projects/AVRISP/Lib/V2Protocol.c | 6 | ||||
-rw-r--r-- | Projects/AVRISP/Lib/V2Protocol.h | 1 | ||||
-rw-r--r-- | Projects/AVRISP/Lib/V2ProtocolConstants.h | 41 | ||||
-rw-r--r-- | Projects/AVRISP/makefile | 3 |
10 files changed, 389 insertions, 45 deletions
diff --git a/Projects/AVRISP/AVRISP.c b/Projects/AVRISP/AVRISP.c index c0572fca2..02292aa46 100644 --- a/Projects/AVRISP/AVRISP.c +++ b/Projects/AVRISP/AVRISP.c @@ -70,6 +70,7 @@ void SetupHardware(void) /* Hardware Initialization */
LEDs_Init();
USB_Init();
+ SerialStream_Init(9600, true);
#if defined(ADC)
/* Initialize the ADC converter for VTARGET level detection on supported AVR models */
diff --git a/Projects/AVRISP/AVRISP.h b/Projects/AVRISP/AVRISP.h index a0f4d5e79..bf9763afb 100644 --- a/Projects/AVRISP/AVRISP.h +++ b/Projects/AVRISP/AVRISP.h @@ -47,6 +47,7 @@ #include <LUFA/Version.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/USB/USB.h>
+ #include <LUFA/Drivers/Peripheral/SerialStream.h>
#if defined(ADC) #include <LUFA/Drivers/Peripheral/ADC.h>
diff --git a/Projects/AVRISP/AVRISP.txt b/Projects/AVRISP/AVRISP.txt index fcb0fdd3d..0ccf72ace 100644 --- a/Projects/AVRISP/AVRISP.txt +++ b/Projects/AVRISP/AVRISP.txt @@ -56,13 +56,12 @@ * Note that this design currently has several limitations:
* - Minimum target clock speed of 500KHz due to hardware SPI used
* - No reversed/shorted target connector detection and notification
- * - PDI programming is not supported for XMEGA targets
*
* On AVR models with an ADC converter, ACC should be tied to 5V (e.g. VBUS) and the VTARGET_ADC_CHANNEL token should be
* set to an appropriate ADC channel number in the project makefile for VTARGET detection to operate correctly. On models
* without an ADC converter, VTARGET will report at a fixed 5V level.
*
- * Connections to the device are simple:
+ * Connections to the device are simple for SPI programming:
*
* <table>
* <tr>
@@ -105,6 +104,12 @@ * <b><sup>1</sup></b> <i>Optional, see \ref SSec_Options section - for USB AVRs with ADC modules only</i> \n
* <b><sup>2</sup></b> <i>See \ref SSec_Options section</i>
*
+ *
+ * Connections to the device are simple for SPI programming:
+ *
+ * <table>
+ * <td><b>PDI Programming is not yet fully implemented.</b></td>
+ * </table>
* \section SSec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
@@ -137,5 +142,10 @@ * <td>Makefile CDEFS</td>
* <td>ADC channel number (on supported AVRs) to use for VTARGET level detection.</td>
* </tr>
+ * <tr>
+ * <td>ENABLE_XPROG_PROTOCOL</td>
+ * <td>Makefile CDEFS</td>
+ * <td>Define to enable XMEGA PDI programming protocol support.</td>
+ * </tr>
* </table>
*/
diff --git a/Projects/AVRISP/Lib/ISPProtocol.c b/Projects/AVRISP/Lib/ISPProtocol.c index bfd917a09..8bfa4d4d7 100644 --- a/Projects/AVRISP/Lib/ISPProtocol.c +++ b/Projects/AVRISP/Lib/ISPProtocol.c @@ -136,7 +136,10 @@ void ISPProtocol_ProgramMemory(uint8_t V2Command) uint8_t ProgData[256]; // Note, the Jungo driver has a very short ACK timeout period, need to buffer the
} Write_Memory_Params; // whole page and ACK the packet as fast as possible to prevent it from aborting
- Endpoint_Read_Stream_LE(&Write_Memory_Params, sizeof(Write_Memory_Params) - sizeof(Write_Memory_Params.ProgData));
+ Endpoint_Read_Stream_LE(&Write_Memory_Params, (sizeof(Write_Memory_Params) -
+ sizeof(Write_Memory_Params.ProgData)));
+
+
Write_Memory_Params.BytesToWrite = SwapEndian_16(Write_Memory_Params.BytesToWrite);
if (Write_Memory_Params.BytesToWrite > sizeof(Write_Memory_Params.ProgData))
diff --git a/Projects/AVRISP/Lib/PDIProtocol.c b/Projects/AVRISP/Lib/PDIProtocol.c new file mode 100644 index 000000000..b095a49c5 --- /dev/null +++ b/Projects/AVRISP/Lib/PDIProtocol.c @@ -0,0 +1,262 @@ +/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2009.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.fourwalledcubicle.com
+*/
+
+/*
+ Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, and distribute this software
+ and its documentation for any purpose and without fee is hereby
+ granted, provided that the above copyright notice appear in all
+ copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+#if defined(ENABLE_XPROG_PROTOCOL)
+
+/** \file
+ *
+ * PDI Protocol handler, to process V2 Protocol wrapped PDI commands used in Atmel programmer devices.
+ */
+
+#define INCLUDE_FROM_XPROG_C
+#include "PDIProtocol.h"
+
+uint32_t XPROG_Param_NVMBase;
+uint32_t XPROG_Param_EEPageSize;
+
+/** Handler for the CMD_XPROG_SETMODE command, which sets the programmer-to-target protocol used for PDI
+ * XMEGA programming (either PDI or JTAG). Only PDI programming is supported.
+ */
+void PDIProtocol_XPROG_SetMode(void)
+{
+ struct
+ {
+ uint8_t Protocol;
+ } SetMode_XPROG_Params;
+
+ Endpoint_Read_Stream_LE(&SetMode_XPROG_Params, sizeof(SetMode_XPROG_Params));
+
+ Endpoint_ClearOUT();
+ Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
+
+ Endpoint_Write_Byte(CMD_XPROG_SETMODE);
+ Endpoint_Write_Byte(SetMode_XPROG_Params.Protocol ? STATUS_CMD_FAILED : STATUS_CMD_OK);
+ Endpoint_ClearIN();
+}
+
+void PDIProtocol_XPROG_Command(void)
+{
+ uint8_t XPROGCommand = Endpoint_Read_Byte();
+
+ switch (XPROGCommand)
+ {
+ case XPRG_CMD_ENTER_PROGMODE:
+ PDIProtocol_EnterXPROGMode();
+ break;
+ case XPRG_CMD_LEAVE_PROGMODE:
+ PDIProtocol_LeaveXPROGMode();
+ break;
+ case XPRG_CMD_ERASE:
+ PDIProtocol_EraseChip();
+ break;
+ case XPRG_CMD_WRITE_MEM:
+ PDIProtocol_WriteMemory();
+ break;
+ case XPRG_CMD_READ_MEM:
+ PDIProtocol_ReadMemory();
+ break;
+ case XPRG_CMD_CRC:
+ PDIProtocol_ReadCRC();
+ break;
+ case XPRG_CMD_SET_PARAM:
+ PDIProtocol_SetParam();
+ break;
+ }
+}
+
+static void PDIProtocol_EraseChip(void)
+{
+ uint8_t ReturnStatus = XPRG_ERR_OK;
+
+ struct
+ {
+ uint8_t MemoryType;
+ uint32_t Address;
+ } Erase_XPROG_Params;
+
+ Endpoint_Read_Stream_LE(&Erase_XPROG_Params, sizeof(Erase_XPROG_Params));
+
+ Endpoint_ClearOUT();
+ Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
+
+ // TODO: Send erase command here via PDI protocol
+
+ Endpoint_Write_Byte(CMD_XPROG);
+ Endpoint_Write_Byte(XPRG_CMD_ERASE);
+ Endpoint_Write_Byte(ReturnStatus);
+ Endpoint_ClearIN();
+}
+
+static void PDIProtocol_WriteMemory(void)
+{
+ uint8_t ReturnStatus = XPRG_ERR_OK;
+
+ struct
+ {
+ uint8_t MemoryType;
+ uint32_t Address;
+ uint16_t Length;
+ uint8_t ProgData[256];
+ } WriteMemory_XPROG_Params;
+
+ Endpoint_Read_Stream_LE(&WriteMemory_XPROG_Params, (sizeof(WriteMemory_XPROG_Params) -
+ sizeof(WriteMemory_XPROG_Params).ProgData));
+ WriteMemory_XPROG_Params.Address = SwapEndian_32(WriteMemory_XPROG_Params.Address);
+ WriteMemory_XPROG_Params.Length = SwapEndian_16(WriteMemory_XPROG_Params.Length);
+ Endpoint_Read_Stream_LE(&WriteMemory_XPROG_Params.ProgData, WriteMemory_XPROG_Params.Length);
+
+ Endpoint_ClearOUT();
+ Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
+
+ // TODO: Send program command here via PDI protocol
+
+ Endpoint_Write_Byte(CMD_XPROG);
+ Endpoint_Write_Byte(XPRG_CMD_READ_MEM);
+ Endpoint_Write_Byte(ReturnStatus);
+ Endpoint_ClearIN();
+}
+
+static void PDIProtocol_ReadMemory(void)
+{
+ uint8_t ReturnStatus = XPRG_ERR_OK;
+
+ struct
+ {
+ uint8_t MemoryType;
+ uint32_t Address;
+ uint16_t Length;
+ } ReadMemory_XPROG_Params;
+
+ Endpoint_Read_Stream_LE(&ReadMemory_XPROG_Params, sizeof(ReadMemory_XPROG_Params));
+ ReadMemory_XPROG_Params.Address = SwapEndian_32(ReadMemory_XPROG_Params.Address);
+ ReadMemory_XPROG_Params.Length = SwapEndian_16(ReadMemory_XPROG_Params.Length);
+
+ Endpoint_ClearOUT();
+ Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
+
+ // TODO: Send read command here via PDI protocol
+
+ Endpoint_Write_Byte(CMD_XPROG);
+ Endpoint_Write_Byte(XPRG_CMD_READ_MEM);
+ Endpoint_Write_Byte(ReturnStatus);
+
+ // START TEMP
+ uint8_t ProgData[256];
+ for (uint16_t i = 0; i < ReadMemory_XPROG_Params.Length; i++)
+ ProgData[i] = i;
+ Endpoint_Write_Stream_LE(ProgData, ReadMemory_XPROG_Params.Length);
+
+ if (!Endpoint_IsReadWriteAllowed())
+ {
+ Endpoint_ClearIN();
+ while(!(Endpoint_IsReadWriteAllowed()));
+ }
+ // END TEMP
+
+ Endpoint_ClearIN();
+}
+
+static void PDIProtocol_ReadCRC(void)
+{
+ uint8_t ReturnStatus = XPRG_ERR_OK;
+
+ uint8_t CRCType = Endpoint_Read_Byte();
+
+ Endpoint_ClearOUT();
+ Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
+
+ uint32_t MemoryCRC = 0;
+
+ // TODO: Read device CRC for desired memory via PDI protocol
+
+ Endpoint_Write_Byte(CMD_XPROG);
+ Endpoint_Write_Byte(XPRG_CMD_CRC);
+ Endpoint_Write_Byte(ReturnStatus);
+
+ if (ReturnStatus == XPRG_ERR_OK)
+ {
+ Endpoint_Write_Byte(MemoryCRC >> 16);
+ Endpoint_Write_Word_LE(MemoryCRC & 0xFFFF);
+ }
+
+ Endpoint_ClearIN();
+}
+
+static void PDIProtocol_EnterXPROGMode(void)
+{
+ uint8_t ReturnStatus = XPRG_ERR_OK;
+
+ Endpoint_ClearOUT();
+ Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
+
+ // TODO: Enter device programming mode here via PDI protocol
+
+ Endpoint_Write_Byte(CMD_XPROG);
+ Endpoint_Write_Byte(XPRG_CMD_ENTER_PROGMODE);
+ Endpoint_Write_Byte(ReturnStatus);
+ Endpoint_ClearIN();
+}
+
+static void PDIProtocol_LeaveXPROGMode(void)
+{
+ Endpoint_ClearOUT();
+ Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
+
+ // TODO: Exit device programming mode here via PDI protocol
+
+ Endpoint_Write_Byte(CMD_XPROG);
+ Endpoint_Write_Byte(XPRG_CMD_LEAVE_PROGMODE);
+ Endpoint_Write_Byte(XPRG_ERR_OK);
+ Endpoint_ClearIN();
+}
+
+static void PDIProtocol_SetParam(void)
+{
+ uint8_t ReturnStatus = XPRG_ERR_OK;
+
+ uint8_t XPROGParam = Endpoint_Read_Byte();
+
+ if (XPROGParam == XPRG_PARAM_NVMBASE)
+ XPROG_Param_NVMBase = Endpoint_Read_DWord_LE();
+ else if (XPROGParam == XPRG_PARAM_EEPPAGESIZE)
+ XPROG_Param_EEPageSize = Endpoint_Read_Word_LE();
+ else
+ ReturnStatus = XPRG_ERR_FAILED;
+
+ Endpoint_ClearOUT();
+ Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
+
+ Endpoint_Write_Byte(CMD_XPROG);
+ Endpoint_Write_Byte(XPRG_CMD_SET_PARAM);
+ Endpoint_Write_Byte(ReturnStatus);
+ Endpoint_ClearIN();
+}
+
+#endif
diff --git a/Projects/AVRISP/Lib/PDIProtocol.h b/Projects/AVRISP/Lib/PDIProtocol.h new file mode 100644 index 000000000..2710b2ff5 --- /dev/null +++ b/Projects/AVRISP/Lib/PDIProtocol.h @@ -0,0 +1,100 @@ +/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2009.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.fourwalledcubicle.com
+*/
+
+/*
+ Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, and distribute this software
+ and its documentation for any purpose and without fee is hereby
+ granted, provided that the above copyright notice appear in all
+ copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ *
+ * Header file for PDIProtocol.c.
+ */
+
+#ifndef _PDI_PROTOCOL_
+#define _PDI_PROTOCOL_
+
+ /* Includes: */
+ #include <avr/io.h>
+ #include <stdio.h>
+
+ #include "V2Protocol.h"
+
+ /* Macros: */
+ #define XPRG_CMD_ENTER_PROGMODE 0x01
+ #define XPRG_CMD_LEAVE_PROGMODE 0x02
+ #define XPRG_CMD_ERASE 0x03
+ #define XPRG_CMD_WRITE_MEM 0x04
+ #define XPRG_CMD_READ_MEM 0x05
+ #define XPRG_CMD_CRC 0x06
+ #define XPRG_CMD_SET_PARAM 0x07
+
+ #define XPRG_MEM_TYPE_APPL 1
+ #define XPRG_MEM_TYPE_BOOT 2
+ #define XPRG_MEM_TYPE_EEPROM 3
+ #define XPRG_MEM_TYPE_FUSE 4
+ #define XPRG_MEM_TYPE_LOCKBITS 5
+ #define XPRG_MEM_TYPE_USERSIG 6
+ #define XPRG_MEM_TYPE_FACTORY_CALIBRATION 7
+
+ #define XPRG_ERASE_CHIP 1
+ #define XPRG_ERASE_APP 2
+ #define XPRG_ERASE_BOOT 3
+ #define XPRG_ERASE_EEPROM 4
+ #define XPRG_ERASE_APP_PAGE 5
+ #define XPRG_ERASE_BOOT_PAGE 6
+ #define XPRG_ERASE_EEPROM_PAGE 7
+ #define XPRG_ERASE_USERSIG 8
+
+ #define XPRG_MEM_WRITE_ERASE 0
+ #define XPRG_MEM_WRITE_WRITE 1
+
+ #define XPRG_CRC_APP 1
+ #define XPRG_CRC_BOOT 2
+ #define XPRG_CRC_FLASH 3
+
+ #define XPRG_ERR_OK 0
+ #define XPRG_ERR_FAILED 1
+ #define XPRG_ERR_COLLISION 2
+ #define XPRG_ERR_TIMEOUT 3
+
+ #define XPRG_PARAM_NVMBASE 0x01
+ #define XPRG_PARAM_EEPPAGESIZE 0x02
+
+ /* Function Prototypes: */
+ void PDIProtocol_XPROG_SetMode(void);
+ void PDIProtocol_XPROG_Command(void);
+
+ #if defined(INCLUDE_FROM_XPROG_C)
+ static void PDIProtocol_EnterXPROGMode(void);
+ static void PDIProtocol_LeaveXPROGMode(void);
+ static void PDIProtocol_SetParam(void);
+ static void PDIProtocol_EraseChip(void);
+ static void PDIProtocol_WriteMemory(void);
+ static void PDIProtocol_ReadMemory(void);
+ static void PDIProtocol_ReadCRC(void);
+ #endif
+
+#endif
diff --git a/Projects/AVRISP/Lib/V2Protocol.c b/Projects/AVRISP/Lib/V2Protocol.c index c0028f72a..d2e0b1686 100644 --- a/Projects/AVRISP/Lib/V2Protocol.c +++ b/Projects/AVRISP/Lib/V2Protocol.c @@ -85,7 +85,11 @@ void V2Protocol_ProcessCommand(void) break;
#if defined(ENABLE_XPROG_PROTOCOL)
case CMD_XPROG_SETMODE:
- V2Protocol_XPROG_SetMode();
+ PDIProtocol_XPROG_SetMode();
+ break;
+ case CMD_XPROG:
+ PDIProtocol_XPROG_Command();
+ break;
#endif
case CMD_READ_FUSE_ISP:
case CMD_READ_LOCK_ISP:
diff --git a/Projects/AVRISP/Lib/V2Protocol.h b/Projects/AVRISP/Lib/V2Protocol.h index b31147846..7a181e32b 100644 --- a/Projects/AVRISP/Lib/V2Protocol.h +++ b/Projects/AVRISP/Lib/V2Protocol.h @@ -44,6 +44,7 @@ #include "V2ProtocolConstants.h"
#include "V2ProtocolParams.h" #include "ISPProtocol.h"
+ #include "PDIProtocol.h"
/* Macros: */
/** Programmer ID string, returned to the host during the CMD_SIGN_ON command processing */ diff --git a/Projects/AVRISP/Lib/V2ProtocolConstants.h b/Projects/AVRISP/Lib/V2ProtocolConstants.h index 5e6bd3638..d01b42b46 100644 --- a/Projects/AVRISP/Lib/V2ProtocolConstants.h +++ b/Projects/AVRISP/Lib/V2ProtocolConstants.h @@ -58,50 +58,9 @@ #define CMD_READ_SIGNATURE_ISP 0x1B
#define CMD_READ_OSCCAL_ISP 0x1C
#define CMD_SPI_MULTI 0x1D
-
#define CMD_XPROG 0x50
#define CMD_XPROG_SETMODE 0x51
- #define XPRG_CMD_ENTER_PROGMODE 0x01
- #define XPRG_CMD_LEAVE_PROGMODE 0x02
- #define XPRG_CMD_ERASE 0x03
- #define XPRG_CMD_WRITE_MEM 0x04
- #define XPRG_CMD_READ_MEM 0x05
- #define XPRG_CMD_CRC 0x06
- #define XPRG_CMD_SET_PARAM 0x07
-
- #define XPRG_MEM_TYPE_APPL 1
- #define XPRG_MEM_TYPE_BOOT 2
- #define XPRG_MEM_TYPE_EEPROM 3
- #define XPRG_MEM_TYPE_FUSE 4
- #define XPRG_MEM_TYPE_LOCKBITS 5
- #define XPRG_MEM_TYPE_USERSIG 6
- #define XPRG_MEM_TYPE_FACTORY_CALIBRATION 7
-
- #define XPRG_ERASE_CHIP 1
- #define XPRG_ERASE_APP 2
- #define XPRG_ERASE_BOOT 3
- #define XPRG_ERASE_EEPROM 4
- #define XPRG_ERASE_APP_PAGE 5
- #define XPRG_ERASE_BOOT_PAGE 6
- #define XPRG_ERASE_EEPROM_PAGE 7
- #define XPRG_ERASE_USERSIG 8
-
- #define XPRG_MEM_WRITE_ERASE 0
- #define XPRG_MEM_WRITE_WRITE 1
-
- #define XPRG_CRC_APP 1
- #define XPRG_CRC_BOOT 2
- #define XPRG_CRC_FLASH 3
-
- #define XPRG_ERR_OK 0
- #define XPRG_ERR_FAILED 1
- #define XPRG_ERR_COLLISION 2
- #define XPRG_ERR_TIMEOUT 3
-
- #define XPRG_PARAM_NVMBASE 0x01
- #define XPRG_PARAM_EEPPAGESIZE 0x02
-
#define STATUS_CMD_OK 0x00
#define STATUS_CMD_TOUT 0x80
#define STATUS_RDY_BSY_TOUT 0x81
diff --git a/Projects/AVRISP/makefile b/Projects/AVRISP/makefile index 1aab6a3c5..91e6b0899 100644 --- a/Projects/AVRISP/makefile +++ b/Projects/AVRISP/makefile @@ -131,6 +131,8 @@ SRC = $(TARGET).c \ Lib/V2ProtocolParams.c \
Lib/ISPProtocol.c \
Lib/ISPTarget.c \
+ Lib/PDIProtocol.c \
+ $(LUFA_PATH)/LUFA/Drivers/Peripheral/SerialStream.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c \
$(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c \
@@ -191,6 +193,7 @@ CDEFS += -DRESET_LINE_PORT=PORTB CDEFS += -DRESET_LINE_DDR=DDRB
CDEFS += -DRESET_LINE_MASK="(1 << 4)"
CDEFS += -DVTARGET_ADC_CHANNEL=2
+CDEFS += -DENABLE_XPROG_PROTOCOL
# Place -D or -U options here for ASM sources
|