diff options
author | Dean Camera <dean@fourwalledcubicle.com> | 2009-12-11 04:04:34 +0000 |
---|---|---|
committer | Dean Camera <dean@fourwalledcubicle.com> | 2009-12-11 04:04:34 +0000 |
commit | 66201a05e9d5793880b27519affff7132f6630ea (patch) | |
tree | 3e93502cd9169a4c3b66190d0ff9a805c4d46863 /Projects | |
parent | 7e5966c1a88bf670c2f4962e8a52fcfc3528e82a (diff) | |
download | lufa-66201a05e9d5793880b27519affff7132f6630ea.tar.gz lufa-66201a05e9d5793880b27519affff7132f6630ea.tar.bz2 lufa-66201a05e9d5793880b27519affff7132f6630ea.zip |
Fix PDI code - must send NVM enable key least significant byte first, need to make sure Tx and Rx is switched correctly including disabling the output on the Tx line when receiving.
Diffstat (limited to 'Projects')
-rw-r--r-- | Projects/AVRISP/Lib/PDIProtocol.c | 12 | ||||
-rw-r--r-- | Projects/AVRISP/Lib/PDITarget.c | 54 | ||||
-rw-r--r-- | Projects/AVRISP/makefile | 2 |
3 files changed, 50 insertions, 18 deletions
diff --git a/Projects/AVRISP/Lib/PDIProtocol.c b/Projects/AVRISP/Lib/PDIProtocol.c index 28bd54071..32a74c586 100644 --- a/Projects/AVRISP/Lib/PDIProtocol.c +++ b/Projects/AVRISP/Lib/PDIProtocol.c @@ -111,18 +111,20 @@ static void PDIProtocol_EnterXPROGMode(void) /* Enable access to the XPROG NVM bus by sending the documented NVM access key to the device */
PDITarget_SendByte(PDI_CMD_KEY);
- for (uint8_t i = 0; i < sizeof(PDI_NVMENABLE_KEY); i++)
- PDITarget_SendByte(PDI_NVMENABLE_KEY[i]);
+ for (uint8_t i = sizeof(PDI_NVMENABLE_KEY); i > 0; i--)
+ PDITarget_SendByte(PDI_NVMENABLE_KEY[i - 1]);
/* Poll the STATUS register to check to see if NVM access has been enabled */
- uint8_t NVMAttemptsRemaining = 200;
- while (NVMAttemptsRemaining--)
+ uint8_t NVMAttemptsRemaining = 150;
+ while (NVMAttemptsRemaining)
{
_delay_ms(1);
- PDITarget_SendByte(PDI_CMD_LDCS | PD_STATUS_REG);
+ PDITarget_SendByte(PDI_CMD_LDCS | PD_STATUS_REG);
if (PDITarget_ReceiveByte() & PDI_STATUS_NVM)
break;
+
+ NVMAttemptsRemaining--;
}
Endpoint_Write_Byte(CMD_XPROG);
diff --git a/Projects/AVRISP/Lib/PDITarget.c b/Projects/AVRISP/Lib/PDITarget.c index d012a1beb..22a4d019a 100644 --- a/Projects/AVRISP/Lib/PDITarget.c +++ b/Projects/AVRISP/Lib/PDITarget.c @@ -38,8 +38,9 @@ #define INCLUDE_FROM_PDITARGET_C
#include "PDITarget.h"
-#if !defined(PDI_VIA_HARDWARE_USART)
volatile bool IsSending;
+
+#if !defined(PDI_VIA_HARDWARE_USART)
volatile uint16_t DataBits;
volatile uint8_t BitCount;
@@ -192,31 +193,60 @@ void PDITarget_DisableTargetPDI(void) void PDITarget_SendByte(uint8_t Byte)
{
- UCSR1B &= ~(1 << RXEN1);
- UCSR1B |= (1 << TXEN1);
+ /* Switch to Tx mode if currently in Rx mode */
+ if (!(IsSending))
+ {
+ PORTD |= (1 << 3);
+ DDRD |= (1 << 3);
+ UCSR1B &= ~(1 << RXEN1);
+ UCSR1B |= (1 << TXEN1);
+
+ IsSending = true;
+ }
+
+ /* Wait until there is space in the hardware Tx buffer before writing */
+ while (!(UCSR1A & (1 << UDRE1)));
UDR1 = Byte;
-
- while (!(UCSR1A & (1 << TXC1)));
- UCSR1A |= (1 << TXC1);
}
uint8_t PDITarget_ReceiveByte(void)
{
- UCSR1B &= ~(1 << TXEN1);
- UCSR1B |= (1 << RXEN1);
+ /* Switch to Rx mode if currently in Tx mode */
+ if (IsSending)
+ {
+ while (!(UCSR1A & (1 << TXC1)));
+ UCSR1A |= (1 << TXC1);
+ UCSR1B &= ~(1 << TXEN1);
+ UCSR1B |= (1 << RXEN1);
+
+ DDRD &= ~(1 << 3);
+ PORTD &= ~(1 << 3);
+
+ IsSending = false;
+ }
+
+ /* Wait until a byte has been received before reading */
while (!(UCSR1A & (1 << RXC1)));
- UCSR1A |= (1 << RXC1);
-
return UDR1;
}
void PDITarget_SendBreak(void)
{
- UCSR1B &= ~(1 << RXEN1);
- UCSR1B |= (1 << TXEN1);
+ /* Switch to Tx mode if currently in Rx mode */
+ if (!(IsSending))
+ {
+ PORTD |= (1 << 3);
+ DDRD |= (1 << 3);
+
+ UCSR1B &= ~(1 << RXEN1);
+ UCSR1B |= (1 << TXEN1);
+
+ IsSending = true;
+ }
+ /* Need to do nothing for a full frame to send a BREAK */
for (uint8_t i = 0; i <= BITS_IN_FRAME; i++)
{
/* Wait for rising edge of clock */
diff --git a/Projects/AVRISP/makefile b/Projects/AVRISP/makefile index 37c0e722b..003eaa57a 100644 --- a/Projects/AVRISP/makefile +++ b/Projects/AVRISP/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, USER or blank for projects not requiring
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
-BOARD = XPLAIN
+BOARD = XPLAIN
# Processor frequency.
|