Spell check library source code files.

6 files changed, 7 insertions, 7 deletions

diff --git a/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c b/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c
index ccd31f3d2..42e436cdf 100644
--- a/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c
+++ b/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c
@@ -230,7 +230,7 @@ void ISPProtocol_ProgramMemory(uint8_t V2Command)
 			if (ProgrammingStatus != STATUS_CMD_OK)
 			  break;
 
-			/* Must reset the polling address afterwards, so it is not erronously used for the next byte */
+			/* Must reset the polling address afterwards, so it is not erroneously used for the next byte */
 			PollAddress = 0;
 		}
 		
diff --git a/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c b/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c
index 373e19149..f08ee6a0e 100644
--- a/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c
+++ b/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c
@@ -140,7 +140,7 @@ ISR(TIMER1_COMPA_vect, ISR_BLOCK)
 	PINB |= (1 << 1);
 }
 
-/** Initialises the appropriate SPI driver (hardware or software, depending on the selected ISP speed) ready for
+/** Initializes the appropriate SPI driver (hardware or software, depending on the selected ISP speed) ready for
  *  communication with the attached target.
  */
 void ISPTarget_EnableTargetISP(void)
@@ -186,7 +186,7 @@ void ISPTarget_DisableTargetISP(void)
 }
 
 /** Configures the AVR to produce a .5MHz rescue clock out of the OCR1A pin of the AVR, so
- *  that it can be fed into the XTAL1 pin of an AVR whose fuses have been misconfigured for
+ *  that it can be fed into the XTAL1 pin of an AVR whose fuses have been mis-configured for
  *  an external clock rather than a crystal. When used, the ISP speed must be 125KHz for this
  *  functionality to work correctly.
  */
diff --git a/Projects/AVRISP-MKII/Lib/V2Protocol.c b/Projects/AVRISP-MKII/Lib/V2Protocol.c
index f763d6333..4c8f0585a 100644
--- a/Projects/AVRISP-MKII/Lib/V2Protocol.c
+++ b/Projects/AVRISP-MKII/Lib/V2Protocol.c
@@ -50,7 +50,7 @@ ISR(WDT_vect, ISR_BLOCK)
 	wdt_disable();
 }
 
-/** Initialises the hardware and software associated with the V2 protocol command handling. */
+/** Initializes the hardware and software associated with the V2 protocol command handling. */
 void V2Protocol_Init(void)
 {
 	#if defined(ADC)
diff --git a/Projects/MediaController/MediaController.c b/Projects/MediaController/MediaController.c
index 0abb4541a..4fcbf911f 100644
--- a/Projects/MediaController/MediaController.c
+++ b/Projects/MediaController/MediaController.c
@@ -147,7 +147,7 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn
 	uint8_t JoyStatus_LCL    = Joystick_GetStatus();

 	uint8_t ButtonStatus_LCL = Buttons_GetStatus();

 

-	/* Update the Media Control report with the user button pressess */

+	/* Update the Media Control report with the user button presses */

 	MediaReport->Mute          = ((ButtonStatus_LCL & BUTTONS_BUTTON1) ? true : false);

 	MediaReport->PlayPause     = ((JoyStatus_LCL & JOY_PRESS) ? true : false);

 	MediaReport->VolumeUp      = ((JoyStatus_LCL & JOY_UP)    ? true : false);

diff --git a/Projects/Webserver/Lib/uIPManagement.c b/Projects/Webserver/Lib/uIPManagement.c
index 8bc27afb7..c0ffcd4a3 100644
--- a/Projects/Webserver/Lib/uIPManagement.c
+++ b/Projects/Webserver/Lib/uIPManagement.c
@@ -164,7 +164,7 @@ void uIPManagement_UDPCallback(void)
 /** Processes Incoming packets to the server from the connected RNDIS device, creating responses as needed. */
 static void uIPManagement_ProcessIncomingPacket(void)
 {
-	/* Determine which USB mode the system is currently initialised in */
+	/* Determine which USB mode the system is currently initialized in */
 	if (USB_CurrentMode == USB_MODE_Device)
 	{
 		/* If no packet received, exit processing routine */
diff --git a/Projects/XPLAINBridge/Lib/SoftUART.c b/Projects/XPLAINBridge/Lib/SoftUART.c
index 370e806ac..9ee103d92 100644
--- a/Projects/XPLAINBridge/Lib/SoftUART.c
+++ b/Projects/XPLAINBridge/Lib/SoftUART.c
@@ -52,7 +52,7 @@ static uint8_t RX_BitsRemaining;
 static uint8_t RX_Data;
 
 
-/** Initialises the software UART, ready for data transmission and reception into the global ring buffers. */
+/** Initializes the software UART, ready for data transmission and reception into the global ring buffers. */
 void SoftUART_Init(void)
 {
 	/* Set TX pin to output high, enable RX pull-up */