diff options
-rw-r--r-- | LUFA/ManPages/LUFAPoweredProjects.txt | 6 | ||||
-rw-r--r-- | Projects/AVRISP/Lib/NVMTarget.c | 59 | ||||
-rw-r--r-- | Projects/AVRISP/Lib/NVMTarget.h | 5 | ||||
-rw-r--r-- | Projects/AVRISP/Lib/PDIProtocol.c | 66 | ||||
-rw-r--r-- | Projects/AVRISP/Lib/PDIProtocol.h | 4 |
5 files changed, 59 insertions, 81 deletions
diff --git a/LUFA/ManPages/LUFAPoweredProjects.txt b/LUFA/ManPages/LUFAPoweredProjects.txt index a548b8fb0..d8e9ffd43 100644 --- a/LUFA/ManPages/LUFAPoweredProjects.txt +++ b/LUFA/ManPages/LUFAPoweredProjects.txt @@ -18,18 +18,20 @@ * The following is a list of known AVR USB development boards, which recommend using LUFA for the USB stack. Some of these
* are open design, and all are available for purchase as completed development boards suitable for project development.
*
- * - Micropendous, an open design/source set of AVR USB development boards: http://micropendous.org/
* - Benito #7, a no-frills USB board: http://www.dorkbotpdx.org/wiki/benito
* - Bumble-B, yet another AT90USB162 development board: http://fletchtronics.net/bumble-b
+ * - Micropendous, an open design/source set of AVR USB development boards: http://micropendous.org/
+ * - Nanduino, a do-it-yourself AT90USB162 board: http://www.makestuff.eu/wordpress/?page_id=569
+ * - Teensy and Teensy++, two other AVR USB development boards: http://www.pjrc.com/teensy/index.html
* - USB10 AKA "The Ferret", a AT90USB162 development board: http://www.soc-machines.com
* - USBFoo, an AT90USB162 based development board: http://shop.kernelconcepts.de/product_info.php?products_id=102
- * - Teensy and Teensy++, two other AVR USB development boards: http://www.pjrc.com/teensy/index.html
*
* \section Sec_LUFAProjects Projects Using LUFA (Hobbyist)
*
* The following are known hobbyist projects using LUFA. Most are open source, and show off interesting ways that the LUFA library
* can be incorporated into many different applications.
*
+ * - Arcade Controller: http://fletchtronics.net/arcade-controller-made-petunia
* - Bicycle POV: http://www.code.google.com/p/bicycleledpov/
* - CAMTRIG, a remote Camera Trigger device: http://code.astraw.com/projects/motmot/camtrig
* - "Fingerlicking Wingdinger" (WARNING: Bad Language if no Javascript), a MIDI controller - http://noisybox.net/electronics/wingdinger/
diff --git a/Projects/AVRISP/Lib/NVMTarget.c b/Projects/AVRISP/Lib/NVMTarget.c index b6922d5e5..9402b2b8a 100644 --- a/Projects/AVRISP/Lib/NVMTarget.c +++ b/Projects/AVRISP/Lib/NVMTarget.c @@ -96,7 +96,7 @@ bool NVMTarget_WaitWhileNVMControllerBusy(void) * \param[in] CRCCommand NVM CRC command to issue to the target
* \param[out] CRCDest CRC Destination when read from the target
*
- * \return Boolean true if the command sequence complete sucessfully
+ * \return Boolean true if the command sequence complete successfully
*/
bool NVMTarget_GetMemoryCRC(uint8_t CRCCommand, uint32_t* CRCDest)
{
@@ -148,7 +148,7 @@ bool NVMTarget_GetMemoryCRC(uint8_t CRCCommand, uint32_t* CRCDest) * \param[out] ReadBuffer Buffer to store read data into
* \param[in] ReadSize Number of bytes to read
*
- * \return Boolean true if the command sequence complete sucessfully
+ * \return Boolean true if the command sequence complete successfully
*/
bool NVMTarget_ReadMemory(uint32_t ReadAddress, uint8_t* ReadBuffer, uint16_t ReadSize)
{
@@ -156,7 +156,7 @@ bool NVMTarget_ReadMemory(uint32_t ReadAddress, uint8_t* ReadBuffer, uint16_t Re if (!(NVMTarget_WaitWhileNVMControllerBusy()))
return false;
- /* Send the READNVM command to the NVM controller for reading of an aribtrary location */
+ /* Send the READNVM command to the NVM controller for reading of an arbitrary location */
PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
NVMTarget_SendNVMRegAddress(NVM_REG_CMD);
PDITarget_SendByte(NVM_CMD_READNVM);
@@ -166,9 +166,8 @@ bool NVMTarget_ReadMemory(uint32_t ReadAddress, uint8_t* ReadBuffer, uint16_t Re NVMTarget_SendAddress(ReadAddress);
/* Send the REPEAT command with the specified number of bytes to read */
- PDITarget_SendByte(PDI_CMD_REPEAT | PDI_DATSIZE_2BYTES);
- PDITarget_SendByte(ReadSize & 0xFF);
- PDITarget_SendByte(ReadSize >> 8);
+ PDITarget_SendByte(PDI_CMD_REPEAT | PDI_DATSIZE_1BYTE);
+ PDITarget_SendByte(ReadSize - 1);
/* Send a LD command with indirect access and postincrement to read out the bytes */
PDITarget_SendByte(PDI_CMD_LD | (PDI_POINTER_INDIRECT_PI << 2) | PDI_DATSIZE_1BYTE);
@@ -185,26 +184,23 @@ bool NVMTarget_ReadMemory(uint32_t ReadAddress, uint8_t* ReadBuffer, uint16_t Re * \param[in] WriteBuffer Buffer to source data from
* \param[in] WriteSize Number of bytes to write
*
- * \return Boolean true if the command sequence complete sucessfully
+ * \return Boolean true if the command sequence complete successfully
*/
-bool NVMTarget_WriteByteMemory(uint8_t WriteCommand, uint32_t WriteAddress, uint8_t* WriteBuffer, uint16_t WriteSize)
+bool NVMTarget_WriteByteMemory(uint8_t WriteCommand, uint32_t WriteAddress, uint8_t* WriteBuffer)
{
- for (uint16_t i = 0; i < WriteSize; i++)
- {
- /* Wait until the NVM controller is no longer busy */
- if (!(NVMTarget_WaitWhileNVMControllerBusy()))
- return false;
+ /* Wait until the NVM controller is no longer busy */
+ if (!(NVMTarget_WaitWhileNVMControllerBusy()))
+ return false;
- /* Send the memory write command to the target */
- PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
- NVMTarget_SendNVMRegAddress(NVM_REG_CMD);
- PDITarget_SendByte(WriteCommand);
+ /* Send the memory write command to the target */
+ PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
+ NVMTarget_SendNVMRegAddress(NVM_REG_CMD);
+ PDITarget_SendByte(WriteCommand);
- /* Send each new memory byte to the memory to the target */
- PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
- NVMTarget_SendAddress(WriteAddress++);
- PDITarget_SendByte(*(WriteBuffer++));
- }
+ /* Send new memory byte to the memory to the target */
+ PDITarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
+ NVMTarget_SendAddress(WriteAddress++);
+ PDITarget_SendByte(*(WriteBuffer++));
return true;
}
@@ -219,7 +215,7 @@ bool NVMTarget_WriteByteMemory(uint8_t WriteCommand, uint32_t WriteAddress, uint * \param[in] WriteBuffer Buffer to source data from
* \param[in] WriteSize Number of bytes to write
*
- * \return Boolean true if the command sequence complete sucessfully
+ * \return Boolean true if the command sequence complete successfully
*/
bool NVMTarget_WritePageMemory(uint8_t WriteBuffCommand, uint8_t EraseBuffCommand, uint8_t WritePageCommand,
uint8_t PageMode, uint32_t WriteAddress, uint8_t* WriteBuffer, uint16_t WriteSize)
@@ -257,22 +253,13 @@ bool NVMTarget_WritePageMemory(uint8_t WriteBuffCommand, uint8_t EraseBuffComman NVMTarget_SendAddress(WriteAddress);
/* Send the REPEAT command with the specified number of bytes to write */
- PDITarget_SendByte(PDI_CMD_REPEAT | PDI_DATSIZE_2BYTES);
- PDITarget_SendByte(WriteSize & 0xFF);
- PDITarget_SendByte(WriteSize >> 8);
+ PDITarget_SendByte(PDI_CMD_REPEAT | PDI_DATSIZE_1BYTE);
+ PDITarget_SendByte(WriteSize - 1);
/* Send a ST command with indirect access and postincrement to write the bytes */
PDITarget_SendByte(PDI_CMD_ST | (PDI_POINTER_INDIRECT_PI << 2) | PDI_DATSIZE_1BYTE);
for (uint16_t i = 0; i < WriteSize; i++)
PDITarget_SendByte(*(WriteBuffer++));
-
- // TEMP
- PDITarget_SendByte(PDI_CMD_LDS | (PDI_DATSIZE_4BYTES << 2));
- NVMTarget_SendNVMRegAddress(NVM_REG_STATUS);
- GPIOR0 = PDITarget_ReceiveByte();
- if (!(GPIOR0 & (1 << 0)))
- JTAG_DEBUG_POINT();
- // END TEMP
}
if (PageMode & XPRG_PAGEMODE_WRITE)
@@ -300,7 +287,7 @@ bool NVMTarget_WritePageMemory(uint8_t WriteBuffCommand, uint8_t EraseBuffComman * \param[in] EraseCommand NVM erase command to send to the device
* \param[in] Address Address inside the memory space to erase
*
- * \return Boolean true if the command sequence complete sucessfully
+ * \return Boolean true if the command sequence complete successfully
*/
bool NVMTarget_EraseMemory(uint8_t EraseCommand, uint32_t Address)
{
@@ -313,7 +300,7 @@ bool NVMTarget_EraseMemory(uint8_t EraseCommand, uint32_t Address) NVMTarget_SendNVMRegAddress(NVM_REG_CMD);
PDITarget_SendByte(EraseCommand);
- /* Chip erase is handled seperately, since it's procedure is different to other erase types */
+ /* Chip erase is handled separately, since it's procedure is different to other erase types */
if (EraseCommand == NVM_CMD_CHIPERASE)
{
/* Set CMDEX bit in NVM CTRLA register to start the chip erase */
diff --git a/Projects/AVRISP/Lib/NVMTarget.h b/Projects/AVRISP/Lib/NVMTarget.h index 3608fcb35..e9acd4375 100644 --- a/Projects/AVRISP/Lib/NVMTarget.h +++ b/Projects/AVRISP/Lib/NVMTarget.h @@ -77,7 +77,7 @@ #define NVM_CMD_LOADFLASHPAGEBUFF 0x23
#define NVM_CMD_ERASEFLASHPAGEBUFF 0x26
#define NVM_CMD_ERASEFLASHPAGE 0x2B
- #define NVM_CMD_FLASHPAGEWRITE 0x2E
+ #define NVM_CMD_WRITEFLASHPAGE 0x2E
#define NVM_CMD_ERASEWRITEFLASH 0x2F
#define NVM_CMD_FLASHCRC 0x78
#define NVM_CMD_ERASEAPPSEC 0x20
@@ -111,8 +111,7 @@ bool NVMTarget_WaitWhileNVMControllerBusy(void);
bool NVMTarget_GetMemoryCRC(uint8_t CRCCommand, uint32_t* CRCDest);
bool NVMTarget_ReadMemory(uint32_t ReadAddress, uint8_t* ReadBuffer, uint16_t ReadSize);
- bool NVMTarget_WriteByteMemory(uint8_t WriteCommand, uint32_t WriteAddress, uint8_t* WriteBuffer,
- uint16_t WriteSize);
+ bool NVMTarget_WriteByteMemory(uint8_t WriteCommand, uint32_t WriteAddress, uint8_t* WriteBuffer);
bool NVMTarget_WritePageMemory(uint8_t WriteBuffCommand, uint8_t EraseBuffCommand, uint8_t WritePageCommand,
uint8_t PageMode, uint32_t WriteAddress, uint8_t* WriteBuffer, uint16_t WriteSize);
bool NVMTarget_EraseMemory(uint8_t EraseCommand, uint32_t Address);
diff --git a/Projects/AVRISP/Lib/PDIProtocol.c b/Projects/AVRISP/Lib/PDIProtocol.c index aa03fc494..1b3fc53c4 100644 --- a/Projects/AVRISP/Lib/PDIProtocol.c +++ b/Projects/AVRISP/Lib/PDIProtocol.c @@ -37,8 +37,6 @@ #include "PDIProtocol.h"
#if defined(ENABLE_PDI_PROTOCOL) || defined(__DOXYGEN__)
-#warning PDI Programming Protocol support is incomplete and not currently suitable for general use.
-
/** Base absolute address for the target's NVM controller */
uint32_t XPROG_Param_NVMBase;
@@ -164,6 +162,7 @@ static void PDIProtocol_Erase(void) uint8_t EraseCommand = NVM_CMD_NOOP;
+ /* Determine which NVM command to send to the device depending on the memory to erase */
if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_CHIP)
EraseCommand = NVM_CMD_CHIPERASE;
else if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_APP)
@@ -181,6 +180,7 @@ static void PDIProtocol_Erase(void) else if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_USERSIG)
EraseCommand = NVM_CMD_ERASEUSERSIG;
+ /* Erase the target memory, indicate timeout if ocurred */
if (!(NVMTarget_EraseMemory(EraseCommand, Erase_XPROG_Params.Address)))
ReturnStatus = XPRG_ERR_TIMEOUT;
@@ -213,65 +213,51 @@ static void PDIProtocol_WriteMemory(void) Endpoint_ClearOUT();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-
- uint8_t WriteCommand = NVM_CMD_NOOP;
- uint8_t WriteBuffCommand = NVM_CMD_NOOP;
- uint8_t EraseBuffCommand = NVM_CMD_NOOP;
- bool PagedMemory = false;
+ /* Assume FLASH page programming by default, as it is the common case */
+ uint8_t WriteCommand = NVM_CMD_WRITEFLASHPAGE;
+ uint8_t WriteBuffCommand = NVM_CMD_LOADFLASHPAGEBUFF;
+ uint8_t EraseBuffCommand = NVM_CMD_ERASEFLASHPAGEBUFF;
+ bool PagedMemory = true;
if (WriteMemory_XPROG_Params.MemoryType == XPRG_MEM_TYPE_APPL)
{
- WriteCommand = NVM_CMD_ERASEWRITEFLASH;
- WriteBuffCommand = NVM_CMD_LOADFLASHPAGEBUFF;
- EraseBuffCommand = NVM_CMD_ERASEFLASHPAGEBUFF;
- PagedMemory = true;
+ WriteCommand = NVM_CMD_WRITEAPPSECPAGE;
}
else if (WriteMemory_XPROG_Params.MemoryType == XPRG_MEM_TYPE_BOOT)
{
- WriteCommand = NVM_CMD_ERASEWRITEFLASH;
- WriteBuffCommand = NVM_CMD_LOADFLASHPAGEBUFF;
- EraseBuffCommand = NVM_CMD_ERASEFLASHPAGEBUFF;
- PagedMemory = true;
+ WriteCommand = NVM_CMD_WRITEBOOTSECPAGE;
}
else if (WriteMemory_XPROG_Params.MemoryType == XPRG_MEM_TYPE_EEPROM)
{
- WriteCommand = NVM_CMD_ERASEWRITEEEPROMPAGE;
+ WriteCommand = NVM_CMD_WRITEEEPROMPAGE;
WriteBuffCommand = NVM_CMD_LOADEEPROMPAGEBUFF;
EraseBuffCommand = NVM_CMD_ERASEEEPROMPAGEBUFF;
- PagedMemory = true;
}
else if (WriteMemory_XPROG_Params.MemoryType == XPRG_MEM_TYPE_USERSIG)
{
+ /* User signature is paged, but needs us to manually indicate the mode bits since the host doesn't set them */
+ WriteMemory_XPROG_Params.PageMode = (XPRG_PAGEMODE_ERASE | XPRG_PAGEMODE_WRITE);
WriteCommand = NVM_CMD_WRITEUSERSIG;
- WriteBuffCommand = NVM_CMD_LOADFLASHPAGEBUFF;
- EraseBuffCommand = NVM_CMD_ERASEFLASHPAGEBUFF;
- PagedMemory = true;
}
else if (WriteMemory_XPROG_Params.MemoryType == XPRG_MEM_TYPE_FUSE)
{
- WriteCommand = NVM_CMD_WRITEFUSE;
+ WriteCommand = NVM_CMD_WRITEFUSE;
+ PagedMemory = false;
}
else if (WriteMemory_XPROG_Params.MemoryType == XPRG_MEM_TYPE_LOCKBITS)
{
- WriteCommand = NVM_CMD_WRITELOCK;
+ WriteCommand = NVM_CMD_WRITELOCK;
+ PagedMemory = false;
}
- if (PagedMemory)
- {
- if (!(NVMTarget_WritePageMemory(WriteBuffCommand, EraseBuffCommand, WriteCommand,
- WriteMemory_XPROG_Params.PageMode, WriteMemory_XPROG_Params.Address,
- WriteMemory_XPROG_Params.ProgData, WriteMemory_XPROG_Params.Length)))
- {
- ReturnStatus = XPRG_ERR_TIMEOUT;
- }
- }
- else
+ /* Send the appropriate memory write commands to the device, indicate timeout if occurred */
+ if ((PagedMemory && !NVMTarget_WritePageMemory(WriteBuffCommand, EraseBuffCommand, WriteCommand,
+ WriteMemory_XPROG_Params.PageMode, WriteMemory_XPROG_Params.Address,
+ WriteMemory_XPROG_Params.ProgData, WriteMemory_XPROG_Params.Length)) ||
+ (!PagedMemory && !NVMTarget_WriteByteMemory(WriteCommand, WriteMemory_XPROG_Params.Address,
+ WriteMemory_XPROG_Params.ProgData)))
{
- if (!(NVMTarget_WriteByteMemory(WriteCommand, WriteMemory_XPROG_Params.Address, WriteMemory_XPROG_Params.ProgData,
- WriteMemory_XPROG_Params.Length)))
- {
- ReturnStatus = XPRG_ERR_TIMEOUT;
- }
+ ReturnStatus = XPRG_ERR_TIMEOUT;
}
Endpoint_Write_Byte(CMD_XPROG);
@@ -301,8 +287,9 @@ static void PDIProtocol_ReadMemory(void) Endpoint_ClearOUT();
Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
- uint8_t ReadBuffer[ReadMemory_XPROG_Params.Length];
+ uint8_t ReadBuffer[256];
+ /* Read the target's memory, indicate timeout if occurred */
if (!(NVMTarget_ReadMemory(ReadMemory_XPROG_Params.Address, ReadBuffer, ReadMemory_XPROG_Params.Length)))
ReturnStatus = XPRG_ERR_TIMEOUT;
@@ -335,6 +322,7 @@ static void PDIProtocol_ReadCRC(void) uint8_t CRCCommand = NVM_CMD_NOOP;
uint32_t MemoryCRC;
+ /* Determine which NVM command to send to the device depending on the memory to CRC */
if (ReadCRC_XPROG_Params.CRCType == XPRG_CRC_APP)
CRCCommand = NVM_CMD_APPCRC;
else if (ReadCRC_XPROG_Params.CRCType == XPRG_CRC_BOOT)
@@ -342,6 +330,7 @@ static void PDIProtocol_ReadCRC(void) else
CRCCommand = NVM_CMD_FLASHCRC;
+ /* Perform and retrieve the memory CRC, indicate timeout if occurred */
if (!(NVMTarget_GetMemoryCRC(CRCCommand, &MemoryCRC)))
ReturnStatus = XPRG_ERR_TIMEOUT;
@@ -367,6 +356,7 @@ static void PDIProtocol_SetParam(void) uint8_t XPROGParam = Endpoint_Read_Byte();
+ /* Determine which parameter is being set, store the new parameter value */
if (XPROGParam == XPRG_PARAM_NVMBASE)
XPROG_Param_NVMBase = Endpoint_Read_DWord_BE();
else if (XPROGParam == XPRG_PARAM_EEPPAGESIZE)
diff --git a/Projects/AVRISP/Lib/PDIProtocol.h b/Projects/AVRISP/Lib/PDIProtocol.h index 127f0866e..137bcc2cf 100644 --- a/Projects/AVRISP/Lib/PDIProtocol.h +++ b/Projects/AVRISP/Lib/PDIProtocol.h @@ -98,8 +98,8 @@ #define XPRG_PROTOCOL_PDI 0x00
#define XPRG_PROTOCOL_JTAG 0x01
- #define XPRG_PAGEMODE_WRITE (1 << 0)
- #define XPRG_PAGEMODE_ERASE (1 << 1)
+ #define XPRG_PAGEMODE_WRITE (1 << 1)
+ #define XPRG_PAGEMODE_ERASE (1 << 0)
/* External Variables: */
extern uint32_t XPROG_Param_NVMBase;
|