diff options
34 files changed, 126 insertions, 32 deletions
diff --git a/Demos/Device/Incomplete/TestAndMeasurement/Config/LUFAConfig.h b/Demos/Device/Incomplete/TestAndMeasurement/Config/LUFAConfig.h index 3b33e2d04..da728ec29 100644 --- a/Demos/Device/Incomplete/TestAndMeasurement/Config/LUFAConfig.h +++ b/Demos/Device/Incomplete/TestAndMeasurement/Config/LUFAConfig.h @@ -85,6 +85,39 @@ // #define NO_AUTO_VBUS_MANAGEMENT // #define INVERTED_VBUS_ENABLE_LINE + #elif (ARCH == ARCH_XMEGA) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH) +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE + #define MAX_ENDPOINT_INDEX 4 +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + #else #error Unsupported architecture for this LUFA configuration file. diff --git a/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c b/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c index bd972e27f..4bd702701 100644 --- a/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c +++ b/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c @@ -93,12 +93,24 @@ int main(void) /** Configures the board hardware and chip peripherals for the demo's functionality. */ void SetupHardware(void) { +#if (ARCH == ARCH_AVR8) /* Disable watchdog if enabled by bootloader/fuses */ MCUSR &= ~(1 << WDRF); wdt_disable(); /* Disable clock division */ clock_prescale_set(clock_div_1); +#elif (ARCH == ARCH_XMEGA) + /* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */ + XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU); + XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL); + + /* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */ + XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ); + XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB); + + PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm; +#endif /* Hardware Initialization */ LEDs_Init(); diff --git a/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.h b/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.h index ed0203343..0c86cc882 100644 --- a/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.h +++ b/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2013. - + dean [at] fourwalledcubicle [dot] com www.lufa-lib.org */ @@ -9,13 +9,13 @@ /* Copyright 2013 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaims all warranties with regard to this @@ -39,8 +39,9 @@ #include "Descriptors.h" - #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/Board/LEDs.h> + #include <LUFA/Drivers/USB/USB.h> + #include <LUFA/Platform/Platform.h> /* Macros: */ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ @@ -54,7 +55,7 @@ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - + /** LED mask for the library LED driver, to indicate that the USB interface is busy. */ #define LEDMASK_USB_BUSY LEDS_LED2 @@ -66,14 +67,14 @@ #define Req_CheckClearStatus 0x06 #define Req_GetCapabilities 0x07 #define Req_IndicatorPulse 0x40 - + #define TMC_STATUS_SUCCESS 0x01 #define TMC_STATUS_PENDING 0x02 #define TMC_STATUS_FAILED 0x80 #define TMC_STATUS_TRANSFER_NOT_IN_PROGRESS 0x81 #define TMC_STATUS_SPLIT_NOT_IN_PROGRESS 0x82 #define TMC_STATUS_SPLIT_IN_PROGRESS 0x83 - + #define TMC_MESSAGEID_DEV_DEP_MSG_OUT 0x01 #define TMC_MESSAGEID_DEV_DEP_MSG_IN 0x02 #define TMC_MESSAGEID_DEV_VENDOR_OUT 0x7E @@ -86,7 +87,7 @@ uint8_t Reserved; uint16_t TMCVersion; - + struct { unsigned ListenOnly : 1; @@ -94,17 +95,17 @@ unsigned PulseIndicateSupported : 1; unsigned Reserved : 5; } Interface; - + struct { unsigned SupportsAbortINOnMatch : 1; unsigned Reserved : 7; } Device; - + uint8_t Reserved2[6]; - uint8_t Reserved3[12]; + uint8_t Reserved3[12]; } TMC_Capabilities_t; - + typedef struct { uint8_t LastMessageTransaction; @@ -125,7 +126,7 @@ uint8_t InverseTag; uint8_t Reserved; uint32_t TransferSize; - + union { TMC_DevOUTMessageHeader_t DeviceOUT; diff --git a/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.c b/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.c index 620e809b4..f7c3c01ce 100644 --- a/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.c +++ b/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.c @@ -68,12 +68,14 @@ int main(void) /** Configures the board hardware and chip peripherals for the demo's functionality. */ void SetupHardware(void) { +#if (ARCH == ARCH_AVR8) /* Disable watchdog if enabled by bootloader/fuses */ MCUSR &= ~(1 << WDRF); wdt_disable(); /* Disable clock division */ clock_prescale_set(clock_div_1); +#endif /* Hardware Initialization */ Serial_Init(9600, false); diff --git a/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.h b/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.h index 48b6389ee..12699398a 100644 --- a/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.h +++ b/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.h @@ -50,6 +50,7 @@ #include <LUFA/Drivers/Board/Joystick.h> #include <LUFA/Drivers/Board/Buttons.h> #include <LUFA/Drivers/USB/USB.h> + #include <LUFA/Platform/Platform.h> #include "Descriptors.h" #include "DeviceFunctions.h" @@ -70,7 +71,7 @@ /* Function Prototypes: */ void SetupHardware(void); - + void EVENT_USB_UIDChange(void); #endif diff --git a/Demos/DualRole/ClassDriver/MouseHostDevice/asf.xml b/Demos/DualRole/ClassDriver/MouseHostDevice/asf.xml index d2b4214bd..19a0905f0 100644 --- a/Demos/DualRole/ClassDriver/MouseHostDevice/asf.xml +++ b/Demos/DualRole/ClassDriver/MouseHostDevice/asf.xml @@ -1,14 +1,14 @@ <asf xmlversion="1.0">
- <project caption="Mouse HID Dual USB Mode Demo (Class Driver APIs)" id="lufa.demos.dualrole.class.mouse.example">
+ <project caption="Mouse HID Dual USB Mode Demo (Class Driver APIs)" id="lufa.demos.dualrole.class.mouse.example.avr8">
<require idref="lufa.demos.dualrole.class.mouse"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb1287"/>
- <config name="lufa.drivers.board.name" value="usbkey"/>
+ <config name="lufa.drivers.board.name" value="none"/>
- <build type="define" name="F_CPU" value="8000000UL"/>
- <build type="define" name="F_USB" value="8000000UL"/>
+ <build type="define" name="F_CPU" value="16000000UL"/>
+ <build type="define" name="F_USB" value="16000000UL"/>
</project>
<module type="application" id="lufa.demos.dualrole.class.mouse" caption="Mouse HID Dual USB Mode Demo (Class Driver APIs)">
diff --git a/Projects/AVRISP-MKII/AVRISP-MKII.c b/Projects/AVRISP-MKII/AVRISP-MKII.c index 24b14b8ba..685d7c611 100644 --- a/Projects/AVRISP-MKII/AVRISP-MKII.c +++ b/Projects/AVRISP-MKII/AVRISP-MKII.c @@ -63,12 +63,14 @@ int main(void) /** Configures the board hardware and chip peripherals for the demo's functionality. */ void SetupHardware(void) { +#if (ARCH == ARCH_AVR8) /* Disable watchdog if enabled by bootloader/fuses */ MCUSR &= ~(1 << WDRF); wdt_disable(); /* Disable clock division */ clock_prescale_set(clock_div_1); +#endif /* Hardware Initialization */ LEDs_Init(); diff --git a/Projects/AVRISP-MKII/AVRISP-MKII.h b/Projects/AVRISP-MKII/AVRISP-MKII.h index 0418f213f..138947a48 100644 --- a/Projects/AVRISP-MKII/AVRISP-MKII.h +++ b/Projects/AVRISP-MKII/AVRISP-MKII.h @@ -44,6 +44,7 @@ #include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/USB/USB.h> + #include <LUFA/Platform/Platform.h> #if defined(ADC) #include <LUFA/Drivers/Peripheral/ADC.h> @@ -79,12 +80,12 @@ void EVENT_USB_Device_Connect(void); void EVENT_USB_Device_Disconnect(void); void EVENT_USB_Device_ConfigurationChanged(void); - + uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, const void** const DescriptorAddress, uint8_t* const DescriptorMemorySpace) - ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3) ATTR_NON_NULL_PTR_ARG(4); + ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3) ATTR_NON_NULL_PTR_ARG(4); #endif diff --git a/Projects/Benito/Benito.c b/Projects/Benito/Benito.c index 7f5d507cf..a89e6caf6 100644 --- a/Projects/Benito/Benito.c +++ b/Projects/Benito/Benito.c @@ -171,10 +171,15 @@ int main(void) /** Configures the board hardware and chip peripherals for the demo's functionality. */ void SetupHardware(void) { +#if (ARCH == ARCH_AVR8) /* Disable watchdog if enabled by bootloader/fuses */ MCUSR &= ~(1 << WDRF); wdt_disable(); + /* Disable clock division */ + clock_prescale_set(clock_div_1); +#endif + /* Hardware Initialization */ LEDs_Init(); USB_Init(); diff --git a/Projects/Benito/Benito.h b/Projects/Benito/Benito.h index 938680bf7..beac29f93 100644 --- a/Projects/Benito/Benito.h +++ b/Projects/Benito/Benito.h @@ -48,6 +48,7 @@ #include <LUFA/Drivers/Peripheral/Serial.h> #include <LUFA/Drivers/Misc/RingBuffer.h> #include <LUFA/Drivers/USB/USB.h> + #include <LUFA/Platform/Platform.h> /* Macros: */ /** LED mask for the library LED driver, to indicate TX activity. */ diff --git a/Projects/HIDReportViewer/HIDReportViewer.c b/Projects/HIDReportViewer/HIDReportViewer.c index 70b2f9e14..6ca33e572 100644 --- a/Projects/HIDReportViewer/HIDReportViewer.c +++ b/Projects/HIDReportViewer/HIDReportViewer.c @@ -202,12 +202,14 @@ void OutputCollectionPath(const HID_CollectionPath_t* const CollectionPath) /** Configures the board hardware and chip peripherals for the demo's functionality. */ void SetupHardware(void) { +#if (ARCH == ARCH_AVR8) /* Disable watchdog if enabled by bootloader/fuses */ MCUSR &= ~(1 << WDRF); wdt_disable(); /* Disable clock division */ clock_prescale_set(clock_div_1); +#endif /* Hardware Initialization */ Serial_Init(9600, false); diff --git a/Projects/HIDReportViewer/HIDReportViewer.h b/Projects/HIDReportViewer/HIDReportViewer.h index 781cfb074..ffe4e00a8 100644 --- a/Projects/HIDReportViewer/HIDReportViewer.h +++ b/Projects/HIDReportViewer/HIDReportViewer.h @@ -49,6 +49,7 @@ #include <LUFA/Drivers/Peripheral/Serial.h> #include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/USB/USB.h> + #include <LUFA/Platform/Platform.h> /* Macros: */ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ diff --git a/Projects/LEDNotifier/LEDNotifier.c b/Projects/LEDNotifier/LEDNotifier.c index 886bf53c6..d6a8fdca3 100644 --- a/Projects/LEDNotifier/LEDNotifier.c +++ b/Projects/LEDNotifier/LEDNotifier.c @@ -142,12 +142,14 @@ int main(void) /** Configures the board hardware and chip peripherals for the demo's functionality. */ void SetupHardware(void) { +#if (ARCH == ARCH_AVR8) /* Disable watchdog if enabled by bootloader/fuses */ MCUSR &= ~(1 << WDRF); wdt_disable(); /* Disable clock division */ clock_prescale_set(clock_div_1); +#endif /* Hardware Initialization */ LEDs_Init(); diff --git a/Projects/LEDNotifier/LEDNotifier.h b/Projects/LEDNotifier/LEDNotifier.h index 4bb9c0492..0b8579f41 100644 --- a/Projects/LEDNotifier/LEDNotifier.h +++ b/Projects/LEDNotifier/LEDNotifier.h @@ -48,6 +48,7 @@ #include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/USB/USB.h> + #include <LUFA/Platform/Platform.h> /* Function Prototypes: */ void SetupHardware(void); diff --git a/Projects/MIDIToneGenerator/MIDIToneGenerator.c b/Projects/MIDIToneGenerator/MIDIToneGenerator.c index 2505a3eeb..662c815bc 100644 --- a/Projects/MIDIToneGenerator/MIDIToneGenerator.c +++ b/Projects/MIDIToneGenerator/MIDIToneGenerator.c @@ -185,12 +185,14 @@ ISR(TIMER0_COMPA_vect, ISR_BLOCK) /** Configures the board hardware and chip peripherals for the demo's functionality. */ void SetupHardware(void) { +#if (ARCH == ARCH_AVR8) /* Disable watchdog if enabled by bootloader/fuses */ MCUSR &= ~(1 << WDRF); wdt_disable(); /* Disable clock division */ clock_prescale_set(clock_div_1); +#endif /* Hardware Initialization */ LEDs_Init(); diff --git a/Projects/MIDIToneGenerator/MIDIToneGenerator.h b/Projects/MIDIToneGenerator/MIDIToneGenerator.h index 27ee34bed..ab434f30e 100644 --- a/Projects/MIDIToneGenerator/MIDIToneGenerator.h +++ b/Projects/MIDIToneGenerator/MIDIToneGenerator.h @@ -49,6 +49,7 @@ #include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/USB/USB.h> + #include <LUFA/Platform/Platform.h> /* Macros: */ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ diff --git a/Projects/Magstripe/Magstripe.c b/Projects/Magstripe/Magstripe.c index 85df8b5ea..8dba7370b 100644 --- a/Projects/Magstripe/Magstripe.c +++ b/Projects/Magstripe/Magstripe.c @@ -94,12 +94,14 @@ int main(void) /** Configures the board hardware and chip peripherals for the demo's functionality. */ void SetupHardware(void) { +#if (ARCH == ARCH_AVR8) /* Disable watchdog if enabled by bootloader/fuses */ MCUSR &= ~(1 << WDRF); wdt_disable(); /* Disable clock division */ clock_prescale_set(clock_div_1); +#endif /* Hardware Initialization */ Magstripe_Init(); diff --git a/Projects/Magstripe/Magstripe.h b/Projects/Magstripe/Magstripe.h index 6d349dfe5..1291f3d62 100644 --- a/Projects/Magstripe/Magstripe.h +++ b/Projects/Magstripe/Magstripe.h @@ -49,6 +49,7 @@ #include "Config/AppConfig.h" #include <LUFA/Drivers/USB/USB.h> + #include <LUFA/Platform/Platform.h> /* Macros: */ /** Total number of tracks which can be read from the card, between 1 and 3. */ diff --git a/Projects/MediaController/MediaController.c b/Projects/MediaController/MediaController.c index f1bf649d2..d12a21aac 100644 --- a/Projects/MediaController/MediaController.c +++ b/Projects/MediaController/MediaController.c @@ -80,12 +80,14 @@ int main(void) /** Configures the board hardware and chip peripherals for the demo's functionality. */ void SetupHardware() { +#if (ARCH == ARCH_AVR8) /* Disable watchdog if enabled by bootloader/fuses */ MCUSR &= ~(1 << WDRF); wdt_disable(); /* Disable clock division */ clock_prescale_set(clock_div_1); +#endif /* Hardware Initialization */ Joystick_Init(); diff --git a/Projects/MediaController/MediaController.h b/Projects/MediaController/MediaController.h index 99f0e1274..d68e2764f 100644 --- a/Projects/MediaController/MediaController.h +++ b/Projects/MediaController/MediaController.h @@ -50,6 +50,7 @@ #include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/Board/Buttons.h> #include <LUFA/Drivers/USB/USB.h> + #include <LUFA/Platform/Platform.h> /* Macros: */ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ diff --git a/Projects/MissileLauncher/MissileLauncher.c b/Projects/MissileLauncher/MissileLauncher.c index 14134d75c..6294f2dcf 100644 --- a/Projects/MissileLauncher/MissileLauncher.c +++ b/Projects/MissileLauncher/MissileLauncher.c @@ -112,12 +112,14 @@ int main(void) /** Configures the board hardware and chip peripherals for the demo's functionality. */ void SetupHardware(void) { +#if (ARCH == ARCH_AVR8) /* Disable watchdog if enabled by bootloader/fuses */ MCUSR &= ~(1 << WDRF); wdt_disable(); /* Disable clock division */ clock_prescale_set(clock_div_1); +#endif /* Hardware Initialization */ LEDs_Init(); diff --git a/Projects/MissileLauncher/MissileLauncher.h b/Projects/MissileLauncher/MissileLauncher.h index 5b51b6e79..4e728295b 100644 --- a/Projects/MissileLauncher/MissileLauncher.h +++ b/Projects/MissileLauncher/MissileLauncher.h @@ -49,6 +49,7 @@ #include <LUFA/Drivers/Board/Buttons.h> #include <LUFA/Drivers/Board/Joystick.h> #include <LUFA/Drivers/Board/LEDs.h> + #include <LUFA/Platform/Platform.h> #include "ConfigDescriptor.h" diff --git a/Projects/RelayBoard/RelayBoard.c b/Projects/RelayBoard/RelayBoard.c index 2c236de97..f2ba464ec 100644 --- a/Projects/RelayBoard/RelayBoard.c +++ b/Projects/RelayBoard/RelayBoard.c @@ -54,12 +54,14 @@ int main(void) /** Configures the board hardware and chip peripherals for the project's functionality. */ void SetupHardware(void) { +#if (ARCH == ARCH_AVR8) /* Disable watchdog if enabled by bootloader/fuses */ MCUSR &= ~(1 << WDRF); wdt_disable(); /* Disable clock division */ clock_prescale_set(clock_div_1); +#endif /* Hardware Initialization */ USB_Init(); diff --git a/Projects/RelayBoard/RelayBoard.h b/Projects/RelayBoard/RelayBoard.h index e43eb2b15..149685a68 100644 --- a/Projects/RelayBoard/RelayBoard.h +++ b/Projects/RelayBoard/RelayBoard.h @@ -47,6 +47,7 @@ #include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/USB/USB.h> + #include <LUFA/Platform/Platform.h> /* Macros: */ #define RELAY1 (1 << 7) diff --git a/Projects/SerialToLCD/SerialToLCD.c b/Projects/SerialToLCD/SerialToLCD.c index 385bcdee3..aac4fadfb 100644 --- a/Projects/SerialToLCD/SerialToLCD.c +++ b/Projects/SerialToLCD/SerialToLCD.c @@ -29,7 +29,7 @@ this software. */ -/** \file +/** \file * * Main source file for the SerialToLCD program. This file contains the main tasks of * the project and is responsible for the initial application hardware configuration. @@ -101,7 +101,7 @@ int main(void) { static uint8_t EscapePending = 0; int16_t HD44780Byte = RingBuffer_Remove(&FromHost_Buffer); - + if (HD44780Byte == COMMAND_ESCAPE) { if (EscapePending) @@ -137,12 +137,14 @@ int main(void) /** Configures the board hardware and chip peripherals for the application's functionality. */ void SetupHardware(void) { +#if (ARCH == ARCH_AVR8) /* Disable watchdog if enabled by bootloader/fuses */ MCUSR &= ~(1 << WDRF); wdt_disable(); /* Disable clock division */ clock_prescale_set(clock_div_1); +#endif /* Hardware Initialization */ USB_Init(); @@ -150,7 +152,7 @@ void SetupHardware(void) /* Power up the HD44780 Interface */ HD44780_Initialize(); HD44780_WriteCommand(CMD_DISPLAY_ON); - + /* Start the flush timer so that overflows occur rapidly to push received bytes to the USB interface */ TCCR0B = (1 << CS02); } diff --git a/Projects/SerialToLCD/SerialToLCD.h b/Projects/SerialToLCD/SerialToLCD.h index b67b84cf7..22537d609 100644 --- a/Projects/SerialToLCD/SerialToLCD.h +++ b/Projects/SerialToLCD/SerialToLCD.h @@ -49,7 +49,8 @@ #include <LUFA/Version.h> #include <LUFA/Drivers/Misc/RingBuffer.h> #include <LUFA/Drivers/USB/USB.h> - + #include <LUFA/Platform/Platform.h> + /* Macros: */ #define COMMAND_ESCAPE 0x1B diff --git a/Projects/TempDataLogger/TempDataLogger.c b/Projects/TempDataLogger/TempDataLogger.c index 415ad9f50..7590aeea3 100644 --- a/Projects/TempDataLogger/TempDataLogger.c +++ b/Projects/TempDataLogger/TempDataLogger.c @@ -190,12 +190,14 @@ void CloseLogFile(void) /** Configures the board hardware and chip peripherals for the demo's functionality. */ void SetupHardware(void) { +#if (ARCH == ARCH_AVR8) /* Disable watchdog if enabled by bootloader/fuses */ MCUSR &= ~(1 << WDRF); wdt_disable(); /* Disable clock division */ clock_prescale_set(clock_div_1); +#endif /* Hardware Initialization */ LEDs_Init(); diff --git a/Projects/TempDataLogger/TempDataLogger.h b/Projects/TempDataLogger/TempDataLogger.h index 21373f4a7..86364f4e3 100644 --- a/Projects/TempDataLogger/TempDataLogger.h +++ b/Projects/TempDataLogger/TempDataLogger.h @@ -50,11 +50,12 @@ #include "Lib/FATFs/ff.h" #include "Lib/DS1307.h" #include "Config/AppConfig.h" - + #include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/Board/Temperature.h> #include <LUFA/Drivers/Peripheral/ADC.h> #include <LUFA/Drivers/USB/USB.h> + #include <LUFA/Platform/Platform.h> /* Macros: */ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ diff --git a/Projects/USBtoSerial/USBtoSerial.c b/Projects/USBtoSerial/USBtoSerial.c index 76e3cb837..6df906340 100644 --- a/Projects/USBtoSerial/USBtoSerial.c +++ b/Projects/USBtoSerial/USBtoSerial.c @@ -145,12 +145,14 @@ int main(void) /** Configures the board hardware and chip peripherals for the demo's functionality. */ void SetupHardware(void) { +#if (ARCH == ARCH_AVR8) /* Disable watchdog if enabled by bootloader/fuses */ MCUSR &= ~(1 << WDRF); wdt_disable(); /* Disable clock division */ clock_prescale_set(clock_div_1); +#endif /* Hardware Initialization */ LEDs_Init(); diff --git a/Projects/USBtoSerial/USBtoSerial.h b/Projects/USBtoSerial/USBtoSerial.h index d37a5405c..220500f91 100644 --- a/Projects/USBtoSerial/USBtoSerial.h +++ b/Projects/USBtoSerial/USBtoSerial.h @@ -48,6 +48,7 @@ #include <LUFA/Drivers/Peripheral/Serial.h> #include <LUFA/Drivers/Misc/RingBuffer.h> #include <LUFA/Drivers/USB/USB.h> + #include <LUFA/Platform/Platform.h> /* Macros: */ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ diff --git a/Projects/Webserver/Webserver.c b/Projects/Webserver/Webserver.c index be53032d2..173b52e95 100644 --- a/Projects/Webserver/Webserver.c +++ b/Projects/Webserver/Webserver.c @@ -60,12 +60,14 @@ int main(void) /** Configures the board hardware and chip peripherals for the demo's functionality. */ void SetupHardware(void) { +#if (ARCH == ARCH_AVR8) /* Disable watchdog if enabled by bootloader/fuses */ MCUSR &= ~(1 << WDRF); wdt_disable(); /* Disable clock division */ clock_prescale_set(clock_div_1); +#endif /* Hardware Initialization */ SPI_Init(SPI_SPEED_FCPU_DIV_2 | SPI_SCK_LEAD_FALLING | SPI_SAMPLE_TRAILING | SPI_MODE_MASTER); diff --git a/Projects/Webserver/Webserver.h b/Projects/Webserver/Webserver.h index 1dfa83036..a828e892e 100644 --- a/Projects/Webserver/Webserver.h +++ b/Projects/Webserver/Webserver.h @@ -47,6 +47,7 @@ #include <LUFA/Drivers/Board/Dataflash.h> #include <LUFA/Drivers/Peripheral/SPI.h> #include <LUFA/Drivers/USB/USB.h> + #include <LUFA/Platform/Platform.h> #include "USBDeviceMode.h" #include "USBHostMode.h" diff --git a/Projects/XPLAINBridge/XPLAINBridge.c b/Projects/XPLAINBridge/XPLAINBridge.c index 79145a138..2ef1d20ee 100644 --- a/Projects/XPLAINBridge/XPLAINBridge.c +++ b/Projects/XPLAINBridge/XPLAINBridge.c @@ -169,12 +169,14 @@ void UARTBridge_Task(void) /** Configures the board hardware and chip peripherals for the demo's functionality. */ void SetupHardware(void) { +#if (ARCH == ARCH_AVR8) /* Disable watchdog if enabled by bootloader/fuses */ MCUSR &= ~(1 << WDRF); wdt_disable(); /* Disable clock division */ clock_prescale_set(clock_div_1); +#endif /* Disable JTAG debugging */ MCUCR |= (1 << JTD); @@ -197,8 +199,8 @@ void SetupHardware(void) #if defined(RESET_TOGGLES_LIBUSB_COMPAT) UpdateCurrentCompatibilityMode(); #endif - - /* USB Stack Initialization */ + + /* USB Stack Initialization */ USB_Init(); } diff --git a/Projects/XPLAINBridge/XPLAINBridge.h b/Projects/XPLAINBridge/XPLAINBridge.h index 1f08b2aba..55921d804 100644 --- a/Projects/XPLAINBridge/XPLAINBridge.h +++ b/Projects/XPLAINBridge/XPLAINBridge.h @@ -45,7 +45,7 @@ #include "USARTDescriptors.h" - #include "AVRISPDescriptors.h" + #include "AVRISPDescriptors.h" #include "Lib/V2Protocol.h" #include "Lib/SoftUART.h" #include "Config/AppConfig.h" @@ -53,6 +53,7 @@ #include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/Misc/RingBuffer.h> #include <LUFA/Drivers/USB/USB.h> + #include <LUFA/Platform/Platform.h> /* Macros: */ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ @@ -97,7 +98,7 @@ const uint8_t wIndex, const void** const DescriptorAddress, uint8_t* const DescriptorMemorySpace) - ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3) ATTR_NON_NULL_PTR_ARG(4); + ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3) ATTR_NON_NULL_PTR_ARG(4); #endif |