diff options
Diffstat (limited to 'Bootloaders/HID/BootloaderHID.txt')
-rw-r--r-- | Bootloaders/HID/BootloaderHID.txt | 16 |
1 files changed, 12 insertions, 4 deletions
diff --git a/Bootloaders/HID/BootloaderHID.txt b/Bootloaders/HID/BootloaderHID.txt index 72583fd96..dba2b6502 100644 --- a/Bootloaders/HID/BootloaderHID.txt +++ b/Bootloaders/HID/BootloaderHID.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage HID Class USB AVR Bootloader * * \section SSec_Compat Demo Compatibility: @@ -28,7 +28,7 @@ * <td><b>USB Class:</b></td> * <td>Human Interface Device Class (HID)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>N/A</td> * </tr> @@ -44,13 +44,13 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * This bootloader enumerates to the host as a HID Class device, allowing for device FLASH programming through * the supplied command line software, which is a modified version of Paul's TeensyHID Command Line loader code * from PJRC (used with permission). This bootloader is deliberatley non-compatible with the properietary PJRC * HalfKay bootloader GUI; only the command line interface software accompanying this bootloader will work with it. - * + * * Out of the box this bootloader builds for the AT90USB1287 with an 8KB bootloader section size, and will fit * into 2KB of bootloader space for the Series 2 USB AVRs (ATMEGAxxU2, AT90USBxx2) or 4KB of bootloader space for * all other models. If you wish to alter this size and/or change the AVR model, you will need to edit the MCU, @@ -74,6 +74,14 @@ * hid_bootloader_cli -mmcu=at90usb1287 Mouse.hex * \endcode * + * \section Sec_KnownIssues Known Issues: + * + * \par After loading an application, it is not run automatically on startup. + * Some USB AVR boards ship with the BOOTRST fuse set, causing the bootloader + * to run automatically when the device is reset. In most cases, the BOOTRST + * fuse should be disabled and the HWBE fuse used instead to run the bootloader + * when needed. + * * \section SSec_Options Project Options * * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. |