diff options
Diffstat (limited to 'Bootloaders/MassStorage')
-rw-r--r-- | Bootloaders/MassStorage/BootloaderMassStorage.txt | 16 |
1 files changed, 16 insertions, 0 deletions
diff --git a/Bootloaders/MassStorage/BootloaderMassStorage.txt b/Bootloaders/MassStorage/BootloaderMassStorage.txt index 493f43ca7..e09484793 100644 --- a/Bootloaders/MassStorage/BootloaderMassStorage.txt +++ b/Bootloaders/MassStorage/BootloaderMassStorage.txt @@ -60,6 +60,22 @@ * \warning <b>THIS BOOTLOADER IS NOT SECURE.</b> Malicious entities can recover written data, even if the device * lockbits are set. * + * \section Sec_Running Running the Bootloader + * + * This bootloader is designed to be started via the HWB mechanism of the USB AVRs; ground the HWB pin (see device + * datasheet) then momentarily ground /RESET to start the bootloader. This assumes the HWBE fuse is set and the BOOTRST + * fuse is cleared. + * + * For board specific exceptions to the above, see below. + * + * \subsection SSec_XPLAIN Atmel Xplain Board + * Ground the USB AVR JTAG's \c TCK pin to ground when powering on the board to start the bootloader. This assumes the + * \c HWBE fuse is cleared and the \c BOOTRST fuse is set as the HWBE pin is not user accessible on this board. + * + * \subsection SSec_Leonardo Arduino Leonardo Board + * Ground \c IO13 when powering the board to start the bootloader. This assumes the \c HWBE fuse is cleared and the + * \c BOOTRST fuse is set as the HWBE pin is not user accessible on this board. + * * \section Sec_Installation Driver Installation * * This bootloader uses the Mass Storage drivers inbuilt into all modern operating systems, thus no additional |