diff options
Diffstat (limited to 'Bootloaders')
| -rw-r--r-- | Bootloaders/CDC/BootloaderCDC.h | 1 | ||||
| -rw-r--r-- | Bootloaders/CDC/BootloaderCDC.txt | 8 | ||||
| -rw-r--r-- | Bootloaders/CDC/Config/AppConfig.h | 17 | ||||
| -rw-r--r-- | Bootloaders/CDC/Config/LUFAConfig.h | 6 | ||||
| -rw-r--r-- | Bootloaders/CDC/Doxygen.conf | 3 | ||||
| -rw-r--r-- | Bootloaders/DFU/BootloaderDFU.txt | 2 | ||||
| -rw-r--r-- | Bootloaders/DFU/Config/LUFAConfig.h | 93 | ||||
| -rw-r--r-- | Bootloaders/DFU/Doxygen.conf | 3 | ||||
| -rw-r--r-- | Bootloaders/DFU/makefile | 14 | ||||
| -rw-r--r-- | Bootloaders/HID/Config/LUFAConfig.h | 93 | ||||
| -rw-r--r-- | Bootloaders/HID/makefile | 14 |
11 files changed, 213 insertions, 41 deletions
diff --git a/Bootloaders/CDC/BootloaderCDC.h b/Bootloaders/CDC/BootloaderCDC.h index 257e884e6..36af96216 100644 --- a/Bootloaders/CDC/BootloaderCDC.h +++ b/Bootloaders/CDC/BootloaderCDC.h @@ -47,6 +47,7 @@ #include "Descriptors.h" #include "BootloaderAPI.h" + #include "Config/AppConfig.h" #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/Board/LEDs.h> diff --git a/Bootloaders/CDC/BootloaderCDC.txt b/Bootloaders/CDC/BootloaderCDC.txt index 618b95d25..9abd7b2f8 100644 --- a/Bootloaders/CDC/BootloaderCDC.txt +++ b/Bootloaders/CDC/BootloaderCDC.txt @@ -133,25 +133,25 @@ * </tr> * <tr> * <td>NO_BLOCK_SUPPORT</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>Define to disable memory block read/write support in the bootloader, requiring all reads and writes to be made * using the byte-level commands.</td> * </tr> * <tr> * <td>NO_EEPROM_BYTE_SUPPORT</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>Define to disable EEPROM memory byte read/write support in the bootloader, requiring all EEPROM reads and writes * to be made using the block-level commands.</td> * </tr> * <tr> * <td>NO_FLASH_BYTE_SUPPORT</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>Define to disable FLASH memory byte read/write support in the bootloader, requiring all FLASH reads and writes * to be made using the block-level commands.</td> * </tr> * <tr> * <td>NO_LOCK_BYTE_WRITE_SUPPORT</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>Define to disable lock byte write support in the bootloader, preventing the lock bits from being set programmatically.</td> * </tr> * </table> diff --git a/Bootloaders/CDC/Config/AppConfig.h b/Bootloaders/CDC/Config/AppConfig.h index ae3e50e1d..9f9b1ce25 100644 --- a/Bootloaders/CDC/Config/AppConfig.h +++ b/Bootloaders/CDC/Config/AppConfig.h @@ -29,22 +29,25 @@ */ /** \file - * \brief LUFA Library Configuration Header File + * \brief Application Configuration Header File * * This is a header file which is be used to configure LUFA's * compile time options, as an alternative to the compile time * constants supplied through a makefile. * - * For information on what each token does, refer to the LUFA - * manual section "Summary of Compile Tokens". + * For information on what each token does, refer to the + * \ref Sec_Options section of the application documentation. */ #ifndef _APP_CONFIG_H_ #define _APP_CONFIG_H_ - #define NO_BLOCK_SUPPORT - #define NO_EEPROM_BYTE_SUPPORT - #define NO_FLASH_BYTE_SUPPORT - #define NO_LOCK_BYTE_WRITE_SUPPORT +// #define NO_BLOCK_SUPPORT + +// #define NO_EEPROM_BYTE_SUPPORT + +// #define NO_FLASH_BYTE_SUPPORT + +// #define NO_LOCK_BYTE_WRITE_SUPPORT #endif
\ No newline at end of file diff --git a/Bootloaders/CDC/Config/LUFAConfig.h b/Bootloaders/CDC/Config/LUFAConfig.h index c5a01c2fa..15ab0599f 100644 --- a/Bootloaders/CDC/Config/LUFAConfig.h +++ b/Bootloaders/CDC/Config/LUFAConfig.h @@ -31,9 +31,9 @@ /** \file * \brief LUFA Library Configuration Header File * - * This is a header file which is be used to configure LUFA's - * compile time options, as an alternative to the compile time - * constants supplied through a makefile. + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. * * For information on what each token does, refer to the LUFA * manual section "Summary of Compile Tokens". diff --git a/Bootloaders/CDC/Doxygen.conf b/Bootloaders/CDC/Doxygen.conf index a5b4bd683..2c655dcff 100644 --- a/Bootloaders/CDC/Doxygen.conf +++ b/Bootloaders/CDC/Doxygen.conf @@ -1531,7 +1531,8 @@ INCLUDE_FILE_PATTERNS = # instead of the = operator. PREDEFINED = __DOXYGEN__ \ - PROGMEM + PROGMEM \ + ATTR_NO_INIT # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then # this tag can be used to specify a list of macro names that should be expanded. diff --git a/Bootloaders/DFU/BootloaderDFU.txt b/Bootloaders/DFU/BootloaderDFU.txt index 2c9eaf1de..04f911617 100644 --- a/Bootloaders/DFU/BootloaderDFU.txt +++ b/Bootloaders/DFU/BootloaderDFU.txt @@ -139,7 +139,7 @@ * <tr> * <td>SECURE_MODE</td> * <td>BootloaderDFU.h</td> - * <td>If defined to true, the bootloader will not accept any memory commands other than a chip erase on start-up, until an + * <td>If defined to \c true, the bootloader will not accept any memory commands other than a chip erase on start-up, until an * erase has been performed. This can be used in conjunction with the AVR's lockbits to prevent the AVRs firmware from * being dumped by unauthorized persons.</td> * </tr> diff --git a/Bootloaders/DFU/Config/LUFAConfig.h b/Bootloaders/DFU/Config/LUFAConfig.h new file mode 100644 index 000000000..59f67596f --- /dev/null +++ b/Bootloaders/DFU/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT + #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ + #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS + #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 32 + #define DEVICE_STATE_AS_GPIOR 0 + #define FIXED_NUM_CONFIGURATIONS 1 + #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT + #define NO_DEVICE_REMOTE_WAKEUP + #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Bootloaders/DFU/Doxygen.conf b/Bootloaders/DFU/Doxygen.conf index 331b4b417..99c1769ba 100644 --- a/Bootloaders/DFU/Doxygen.conf +++ b/Bootloaders/DFU/Doxygen.conf @@ -1531,7 +1531,8 @@ INCLUDE_FILE_PATTERNS = # instead of the = operator. PREDEFINED = __DOXYGEN__ \ - PROGMEM + PROGMEM \ + ATTR_NO_INIT # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then # this tag can be used to specify a list of macro names that should be expanded. diff --git a/Bootloaders/DFU/makefile b/Bootloaders/DFU/makefile index f78ceb270..a6db90089 100644 --- a/Bootloaders/DFU/makefile +++ b/Bootloaders/DFU/makefile @@ -124,17 +124,7 @@ LUFA_PATH = ../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0 -LUFA_OPTS += -D CONTROL_ONLY_DEVICE -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=32 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_RAM_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" -LUFA_OPTS += -D NO_INTERNAL_SERIAL -LUFA_OPTS += -D NO_DEVICE_SELF_POWER -LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP -LUFA_OPTS += -D NO_SOF_EVENTS +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -179,7 +169,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Bootloaders/HID/Config/LUFAConfig.h b/Bootloaders/HID/Config/LUFAConfig.h new file mode 100644 index 000000000..15ab0599f --- /dev/null +++ b/Bootloaders/HID/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ + #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT + #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ + #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS + #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 + #define DEVICE_STATE_AS_GPIOR 0 + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT + #define NO_DEVICE_REMOTE_WAKEUP + #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Bootloaders/HID/makefile b/Bootloaders/HID/makefile index bfefbf695..b0ae6d6d9 100644 --- a/Bootloaders/HID/makefile +++ b/Bootloaders/HID/makefile @@ -122,17 +122,7 @@ LUFA_PATH = ../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0 -LUFA_OPTS += -D ORDERED_EP_CONFIG -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_RAM_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" -LUFA_OPTS += -D NO_INTERNAL_SERIAL -LUFA_OPTS += -D NO_DEVICE_SELF_POWER -LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP -LUFA_OPTS += -D NO_SOF_EVENTS +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -176,7 +166,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. |