diff options
Diffstat (limited to 'Demos/Device/Mouse/Mouse.c')
| -rw-r--r-- | Demos/Device/Mouse/Mouse.c | 309 |
1 files changed, 39 insertions, 270 deletions
diff --git a/Demos/Device/Mouse/Mouse.c b/Demos/Device/Mouse/Mouse.c index 32b12fc61..57c1aa114 100644 --- a/Demos/Device/Mouse/Mouse.c +++ b/Demos/Device/Mouse/Mouse.c @@ -27,44 +27,33 @@ arising out of or in connection with the use or performance of
this software.
*/
-
-/** \file
- *
- * Main source file for the Mouse demo. This file contains the main tasks of the demo and
- * is responsible for the initial application hardware configuration.
- */
#include "Mouse.h"
-/* Scheduler Task List */
-TASK_LIST
-{
- { .Task = USB_USBTask , .TaskStatus = TASK_STOP },
- { .Task = USB_Mouse_Report , .TaskStatus = TASK_STOP },
-};
+USB_ClassInfo_HID_t Mouse_HID_Interface =
+ {
+ .InterfaceNumber = 0,
-/* Global Variables */
-/** Indicates what report mode the host has requested, true for normal HID reporting mode, false for special boot
- * protocol reporting mode.
- */
-bool UsingReportProtocol = true;
+ .ReportINEndpointNumber = MOUSE_EPNUM,
+ .ReportINEndpointSize = MOUSE_EPSIZE,
-/** Current Idle period. This is set by the host via a Set Idle HID class request to silence the device's reports
- * for either the entire idle duration, or until the report status changes (e.g. the user moves the mouse).
- */
-uint16_t IdleCount = HID_IDLE_CHANGESONLY;
+ .ReportBufferSize = sizeof(USB_MouseReport_Data_t),
+ };
-/** Current Idle period remaining. When the IdleCount value is set, this tracks the remaining number of idle
- * milliseconds. This is separate to the IdleCount timer and is incremented and compared as the host may request
- * the current idle period via a Get Idle HID class request, thus its value must be preserved.
- */
-uint16_t IdleMSRemaining = 0;
+int main(void)
+{
+ SetupHardware();
+
+ LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+ for (;;)
+ {
+ USB_HID_USBTask(&Mouse_HID_Interface);
+ USB_USBTask();
+ }
+}
-/** Main program entry point. This routine configures the hardware required by the application, then
- * starts the scheduler to run the application tasks.
- */
-int main(void)
+void SetupHardware(void)
{
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
@@ -77,284 +66,64 @@ int main(void) Joystick_Init();
LEDs_Init();
Buttons_Init();
-
- /* Millisecond timer initialization, with output compare interrupt enabled for the idle timing */
- OCR0A = 0x7D;
- TCCR0A = (1 << WGM01);
- TCCR0B = ((1 << CS01) | (1 << CS00));
- TIMSK0 = (1 << OCIE0A);
-
- /* Indicate USB not ready */
- UpdateStatus(Status_USBNotReady);
-
- /* Initialize Scheduler so that it can be used */
- Scheduler_Init();
-
- /* Initialize USB Subsystem */
USB_Init();
-
- /* Scheduling - routine never returns, so put this last in the main function */
- Scheduler_Start();
}
-/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and
- * starts the library USB task to begin the enumeration and USB management process.
- */
void EVENT_USB_Connect(void)
{
- /* Start USB management task */
- Scheduler_SetTaskMode(USB_USBTask, TASK_RUN);
-
- /* Indicate USB enumerating */
- UpdateStatus(Status_USBEnumerating);
-
- /* Default to report protocol on connect */
- UsingReportProtocol = true;
+ LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
}
-/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
- * the status LEDs and stops the USB management and Mouse reporting tasks.
- */
void EVENT_USB_Disconnect(void)
{
- /* Stop running mouse reporting and USB management tasks */
- Scheduler_SetTaskMode(USB_Mouse_Report, TASK_STOP);
- Scheduler_SetTaskMode(USB_USBTask, TASK_STOP);
-
- /* Indicate USB not ready */
- UpdateStatus(Status_USBNotReady);
+ LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
}
-/** Event handler for the USB_ConfigurationChanged event. This is fired when the host sets the current configuration
- * of the USB device after enumeration - the device endpoints are configured and the mouse reporting task started.
- */
void EVENT_USB_ConfigurationChanged(void)
{
- /* Setup Mouse Report Endpoint */
- Endpoint_ConfigureEndpoint(MOUSE_EPNUM, EP_TYPE_INTERRUPT,
- ENDPOINT_DIR_IN, MOUSE_EPSIZE,
- ENDPOINT_BANK_SINGLE);
-
- /* Indicate USB connected and ready */
- UpdateStatus(Status_USBReady);
+ LEDs_SetAllLEDs(LEDMASK_USB_READY);
- /* Start running mouse reporting task */
- Scheduler_SetTaskMode(USB_Mouse_Report, TASK_RUN);
+ if (!(USB_HID_ConfigureEndpoints(&Mouse_HID_Interface)))
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
}
-/** Event handler for the USB_UnhandledControlPacket event. This is used to catch standard and class specific
- * control requests that are not handled internally by the USB library (including the HID commands, which are
- * all issued via the control endpoint), so that they can be handled appropriately for the application.
- */
void EVENT_USB_UnhandledControlPacket(void)
{
- /* Handle HID Class specific requests */
- switch (USB_ControlRequest.bRequest)
- {
- case REQ_GetReport:
- if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
- {
- USB_MouseReport_Data_t MouseReportData;
-
- Endpoint_ClearSETUP();
-
- /* Create the next mouse report for transmission to the host */
- CreateMouseReport(&MouseReportData);
-
- /* Write the report data to the control endpoint */
- Endpoint_Write_Control_Stream_LE(&MouseReportData, sizeof(MouseReportData));
-
- /* Clear the report data afterwards */
- memset(&MouseReportData, 0, sizeof(MouseReportData));
-
- /* Finalize the stream transfer to send the last packet or clear the host abort */
- Endpoint_ClearOUT();
- }
-
- break;
- case REQ_GetProtocol:
- if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
- {
- Endpoint_ClearSETUP();
-
- /* Write the current protocol flag to the host */
- Endpoint_Write_Byte(UsingReportProtocol);
-
- /* Send the flag to the host */
- Endpoint_ClearIN();
-
- /* Acknowledge status stage */
- while (!(Endpoint_IsOUTReceived()));
- Endpoint_ClearOUT();
- }
-
- break;
- case REQ_SetProtocol:
- if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
- {
- Endpoint_ClearSETUP();
-
- /* Set or clear the flag depending on what the host indicates that the current Protocol should be */
- UsingReportProtocol = (USB_ControlRequest.wValue != 0);
-
- /* Acknowledge status stage */
- while (!(Endpoint_IsINReady()));
- Endpoint_ClearIN();
- }
-
- break;
- case REQ_SetIdle:
- if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
- {
- Endpoint_ClearSETUP();
-
- /* Get idle period in MSB */
- IdleCount = (USB_ControlRequest.wValue >> 8);
-
- /* Acknowledge status stage */
- while (!(Endpoint_IsINReady()));
- Endpoint_ClearIN();
- }
-
- break;
- case REQ_GetIdle:
- if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
- {
- Endpoint_ClearSETUP();
-
- /* Write the current idle duration to the host */
- Endpoint_Write_Byte(IdleCount);
-
- /* Send the flag to the host */
- Endpoint_ClearIN();
-
- /* Acknowledge status stage */
- while (!(Endpoint_IsOUTReceived()));
- Endpoint_ClearOUT();
- }
-
- break;
- }
+ USB_HID_ProcessControlPacket(&Mouse_HID_Interface);
}
-/** ISR for the timer 0 compare vector. This ISR fires once each millisecond, and increments the
- * scheduler elapsed idle period counter when the host has set an idle period.
- */
-ISR(TIMER0_COMPA_vect, ISR_BLOCK)
+void EVENT_USB_StartOfFrame(void)
{
- /* One millisecond has elapsed, decrement the idle time remaining counter if it has not already elapsed */
- if (IdleMSRemaining)
- IdleMSRemaining--;
+ USB_HID_RegisterStartOfFrame(&Mouse_HID_Interface);
}
-/** Fills the given HID report data structure with the next HID report to send to the host.
- *
- * \param ReportData Pointer to a HID report data structure to be filled
- */
-void CreateMouseReport(USB_MouseReport_Data_t* ReportData)
+uint16_t CALLBACK_USB_HID_CreateNextHIDReport(USB_ClassInfo_HID_t* HIDInterfaceInfo, void* ReportData)
{
+ USB_MouseReport_Data_t* MouseReport = (USB_MouseReport_Data_t*)ReportData;
+
uint8_t JoyStatus_LCL = Joystick_GetStatus();
uint8_t ButtonStatus_LCL = Buttons_GetStatus();
-
- /* Clear the report contents */
- memset(ReportData, 0, sizeof(USB_MouseReport_Data_t));
if (JoyStatus_LCL & JOY_UP)
- ReportData->Y = -1;
+ MouseReport->Y = -1;
else if (JoyStatus_LCL & JOY_DOWN)
- ReportData->Y = 1;
+ MouseReport->Y = 1;
if (JoyStatus_LCL & JOY_RIGHT)
- ReportData->X = 1;
+ MouseReport->X = 1;
else if (JoyStatus_LCL & JOY_LEFT)
- ReportData->X = -1;
+ MouseReport->X = -1;
if (JoyStatus_LCL & JOY_PRESS)
- ReportData->Button = (1 << 0);
+ MouseReport->Button = (1 << 0);
if (ButtonStatus_LCL & BUTTONS_BUTTON1)
- ReportData->Button |= (1 << 1);
-}
-
-/** Sends the next HID report to the host, via the keyboard data endpoint. */
-void SendNextReport(void)
-{
- static USB_MouseReport_Data_t PrevMouseReportData;
- USB_MouseReport_Data_t MouseReportData;
- bool SendReport;
-
- /* Create the next mouse report for transmission to the host */
- CreateMouseReport(&MouseReportData);
-
- /* Check to see if the report data has changed - if so a report MUST be sent */
- SendReport = (memcmp(&PrevMouseReportData, &MouseReportData, sizeof(USB_MouseReport_Data_t)) != 0);
-
- /* Override the check if the Y or X values are non-zero - we want continuous movement while the joystick
- * is being held down (via continuous reports), otherwise the cursor will only move once per joystick toggle */
- if ((MouseReportData.Y != 0) || (MouseReportData.X != 0))
- SendReport = true;
-
- /* Save the current report data for later comparison to check for changes */
- PrevMouseReportData = MouseReportData;
-
- /* Check if the idle period is set and has elapsed */
- if ((IdleCount != HID_IDLE_CHANGESONLY) && (!(IdleMSRemaining)))
- {
- /* Reset the idle time remaining counter, must multiply by 4 to get the duration in milliseconds */
- IdleMSRemaining = (IdleCount << 2);
-
- /* Idle period is set and has elapsed, must send a report to the host */
- SendReport = true;
- }
+ MouseReport->Button |= (1 << 1);
- /* Select the Mouse Report Endpoint */
- Endpoint_SelectEndpoint(MOUSE_EPNUM);
-
- /* Check if Mouse Endpoint Ready for Read/Write and if we should send a new report */
- if (Endpoint_IsReadWriteAllowed() && SendReport)
- {
- /* Write Mouse Report Data */
- Endpoint_Write_Stream_LE(&MouseReportData, sizeof(MouseReportData));
-
- /* Finalize the stream transfer to send the last packet */
- Endpoint_ClearIN();
- }
+ return sizeof(USB_MouseReport_Data_t);
}
-/** Function to manage status updates to the user. This is done via LEDs on the given board, if available, but may be changed to
- * log to a serial port, or anything else that is suitable for status updates.
- *
- * \param CurrentStatus Current status of the system, from the Mouse_StatusCodes_t enum
- */
-void UpdateStatus(uint8_t CurrentStatus)
+void CALLBACK_USB_HID_ProcessReceivedHIDReport(USB_ClassInfo_HID_t* HIDInterfaceInfo, void* ReportData, uint16_t ReportSize)
{
- uint8_t LEDMask = LEDS_NO_LEDS;
-
- /* Set the LED mask to the appropriate LED mask based on the given status code */
- switch (CurrentStatus)
- {
- case Status_USBNotReady:
- LEDMask = (LEDS_LED1);
- break;
- case Status_USBEnumerating:
- LEDMask = (LEDS_LED1 | LEDS_LED2);
- break;
- case Status_USBReady:
- LEDMask = (LEDS_LED2 | LEDS_LED4);
- break;
- }
-
- /* Set the board LEDs to the new LED mask */
- LEDs_SetAllLEDs(LEDMask);
-}
-
-/** Task to manage HID report generation and transmission to the host, when in report mode. */
-TASK(USB_Mouse_Report)
-{
- /* Check if the USB system is connected to a host */
- if (USB_IsConnected)
- {
- /* Send the next mouse report to the host */
- SendNextReport();
- }
+ // Unused (but mandatory for the HID class driver) in this demo, since there are no Host->Device reports
}
|