diff options
Diffstat (limited to 'Demos/Device')
40 files changed, 148 insertions, 248 deletions
diff --git a/Demos/Device/AudioInput/AudioInput.c b/Demos/Device/AudioInput/AudioInput.c index 05094c2b8..ecd8cdda8 100644 --- a/Demos/Device/AudioInput/AudioInput.c +++ b/Demos/Device/AudioInput/AudioInput.c @@ -80,7 +80,7 @@ int main(void) /** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs, and
* configures the sample update and PWM timers.
*/
-EVENT_HANDLER(USB_Connect)
+void EVENT_USB_Connect(void)
{
/* Start USB management task */
Scheduler_SetTaskMode(USB_USBTask, TASK_RUN);
@@ -97,7 +97,7 @@ EVENT_HANDLER(USB_Connect) /** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
* the status LEDs, disables the sample update and PWM output timers and stops the USB and Audio management tasks.
*/
-EVENT_HANDLER(USB_Disconnect)
+void EVENT_USB_Disconnect(void)
{
/* Stop the sample reload timer */
TCCR0B = 0;
@@ -113,7 +113,7 @@ EVENT_HANDLER(USB_Disconnect) /** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
* of the USB device after enumeration - the device endpoints are configured.
*/
-EVENT_HANDLER(USB_ConfigurationChanged)
+void EVENT_USB_ConfigurationChanged(void)
{
/* Setup audio stream endpoint */
Endpoint_ConfigureEndpoint(AUDIO_STREAM_EPNUM, EP_TYPE_ISOCHRONOUS,
@@ -128,7 +128,7 @@ EVENT_HANDLER(USB_ConfigurationChanged) * control requests that are not handled internally by the USB library (including the Audio class-specific
* requests) so that they can be handled appropriately for the application.
*/
-EVENT_HANDLER(USB_UnhandledControlPacket)
+void EVENT_USB_UnhandledControlPacket(void)
{
/* Process General and Audio specific control requests */
switch (USB_ControlRequest.bRequest)
diff --git a/Demos/Device/AudioInput/AudioInput.h b/Demos/Device/AudioInput/AudioInput.h index b7174d1f8..6358c24a0 100644 --- a/Demos/Device/AudioInput/AudioInput.h +++ b/Demos/Device/AudioInput/AudioInput.h @@ -71,20 +71,12 @@ /* Task Definitions: */
TASK(USB_Audio_Task);
- /* Event Handlers: */
- /** Indicates that this module will catch the USB_Connect event when thrown by the library. */
- HANDLES_EVENT(USB_Connect);
-
- /** Indicates that this module will catch the USB_Disconnect event when thrown by the library. */
- HANDLES_EVENT(USB_Disconnect);
-
- /** Indicates that this module will catch the USB_ConfigurationChanged event when thrown by the library. */
- HANDLES_EVENT(USB_ConfigurationChanged);
-
- /** Indicates that this module will catch the USB_UnhandledControlPacket event when thrown by the library. */
- HANDLES_EVENT(USB_UnhandledControlPacket);
-
/* Function Prototypes: */
+ void EVENT_USB_Connect(void);
+ void EVENT_USB_Disconnect(void);
+ void EVENT_USB_ConfigurationChanged(void);
+ void EVENT_USB_UnhandledControlPacket(void);
+
void UpdateStatus(uint8_t CurrentStatus);
#endif
diff --git a/Demos/Device/AudioInput/makefile b/Demos/Device/AudioInput/makefile index aca88cb87..7c8b7ab5a 100644 --- a/Demos/Device/AudioInput/makefile +++ b/Demos/Device/AudioInput/makefile @@ -505,7 +505,7 @@ sizeafter: checkhooks: build
@echo
@echo ------- Unhooked LUFA Events -------
- @$(shell) (grep -s '^Event.*LUFA/.*\\.o' $(TARGET).map | \
+ @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
@echo ------------------------------------
diff --git a/Demos/Device/AudioOutput/AudioOutput.c b/Demos/Device/AudioOutput/AudioOutput.c index 640462da1..7ec2e3534 100644 --- a/Demos/Device/AudioOutput/AudioOutput.c +++ b/Demos/Device/AudioOutput/AudioOutput.c @@ -75,7 +75,7 @@ int main(void) /** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs, and
* configures the sample update and PWM timers.
*/
-EVENT_HANDLER(USB_Connect)
+void EventHandler_USB_Connect(void)
{
/* Start USB management task */
Scheduler_SetTaskMode(USB_USBTask, TASK_RUN);
@@ -110,7 +110,7 @@ EVENT_HANDLER(USB_Connect) /** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
* the status LEDs, disables the sample update and PWM output timers and stops the USB and Audio management tasks.
*/
-EVENT_HANDLER(USB_Disconnect)
+void EventHandler_USB_Disconnect(void)
{
/* Stop the timers */
TCCR0B = 0;
@@ -140,7 +140,7 @@ EVENT_HANDLER(USB_Disconnect) /** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
* of the USB device after enumeration - the device endpoints are configured.
*/
-EVENT_HANDLER(USB_ConfigurationChanged)
+void EventHandler_USB_ConfigurationChanged(void)
{
/* Setup audio stream endpoint */
Endpoint_ConfigureEndpoint(AUDIO_STREAM_EPNUM, EP_TYPE_ISOCHRONOUS,
@@ -155,7 +155,7 @@ EVENT_HANDLER(USB_ConfigurationChanged) * control requests that are not handled internally by the USB library (including the Audio class-specific
* requests) so that they can be handled appropriately for the application.
*/
-EVENT_HANDLER(USB_UnhandledControlPacket)
+void EventHandler_USB_UnhandledControlPacket(void)
{
/* Process General and Audio specific control requests */
switch (USB_ControlRequest.bRequest)
diff --git a/Demos/Device/AudioOutput/AudioOutput.h b/Demos/Device/AudioOutput/AudioOutput.h index 05b24ad07..d8725a07b 100644 --- a/Demos/Device/AudioOutput/AudioOutput.h +++ b/Demos/Device/AudioOutput/AudioOutput.h @@ -107,21 +107,13 @@ /* Task Definitions: */
TASK(USB_Audio_Task);
-
- /* Event Handlers: */
- /** Indicates that this module will catch the USB_Connect event when thrown by the library. */
- HANDLES_EVENT(USB_Connect);
-
- /** Indicates that this module will catch the USB_Disconnect event when thrown by the library. */
- HANDLES_EVENT(USB_Disconnect);
-
- /** Indicates that this module will catch the USB_ConfigurationChanged event when thrown by the library. */
- HANDLES_EVENT(USB_ConfigurationChanged);
-
- /** Indicates that this module will catch the USB_UnhandledControlPacket event when thrown by the library. */
- HANDLES_EVENT(USB_UnhandledControlPacket);
/* Function Prototypes: */
+ void EVENT_USB_Connect(void);
+ void EVENT_USB_Disconnect(void);
+ void EVENT_USB_ConfigurationChanged(void);
+ void EVENT_USB_UnhandledControlPacket(void);
+
void UpdateStatus(uint8_t CurrentStatus);
#endif
diff --git a/Demos/Device/AudioOutput/makefile b/Demos/Device/AudioOutput/makefile index 0a6401b70..fc200be4a 100644 --- a/Demos/Device/AudioOutput/makefile +++ b/Demos/Device/AudioOutput/makefile @@ -505,7 +505,7 @@ sizeafter: checkhooks: build
@echo
@echo ------- Unhooked LUFA Events -------
- @$(shell) (grep -s '^Event.*LUFA/.*\\.o' $(TARGET).map | \
+ @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
@echo ------------------------------------
diff --git a/Demos/Device/CDC/CDC.c b/Demos/Device/CDC/CDC.c index 59aa98ceb..d7ebb9e6b 100644 --- a/Demos/Device/CDC/CDC.c +++ b/Demos/Device/CDC/CDC.c @@ -104,7 +104,7 @@ int main(void) /** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and
* starts the library USB task to begin the enumeration and USB management process.
*/
-EVENT_HANDLER(USB_Connect)
+void EVENT_USB_Connect(void)
{
/* Start USB management task */
Scheduler_SetTaskMode(USB_USBTask, TASK_RUN);
@@ -116,7 +116,7 @@ EVENT_HANDLER(USB_Connect) /** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
* the status LEDs and stops the USB management and CDC management tasks.
*/
-EVENT_HANDLER(USB_Disconnect)
+void EVENT_USB_Disconnect(void)
{
/* Stop running CDC and USB management tasks */
Scheduler_SetTaskMode(CDC_Task, TASK_STOP);
@@ -129,7 +129,7 @@ EVENT_HANDLER(USB_Disconnect) /** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
* of the USB device after enumeration - the device endpoints are configured and the CDC management task started.
*/
-EVENT_HANDLER(USB_ConfigurationChanged)
+void EVENT_USB_ConfigurationChanged(void)
{
/* Setup CDC Notification, Rx and Tx Endpoints */
Endpoint_ConfigureEndpoint(CDC_NOTIFICATION_EPNUM, EP_TYPE_INTERRUPT,
@@ -155,7 +155,7 @@ EVENT_HANDLER(USB_ConfigurationChanged) * control requests that are not handled internally by the USB library (including the CDC control commands,
* which are all issued via the control endpoint), so that they can be handled appropriately for the application.
*/
-EVENT_HANDLER(USB_UnhandledControlPacket)
+void EVENT_USB_UnhandledControlPacket(void)
{
uint8_t* LineCodingData = (uint8_t*)&LineCoding;
diff --git a/Demos/Device/CDC/CDC.h b/Demos/Device/CDC/CDC.h index 1537f0ba3..4c4ca74d5 100644 --- a/Demos/Device/CDC/CDC.h +++ b/Demos/Device/CDC/CDC.h @@ -111,19 +111,6 @@ */
#define CONTROL_LINE_IN_OVERRUNERROR (1 << 6)
- /* Event Handlers: */
- /** Indicates that this module will catch the USB_Connect event when thrown by the library. */
- HANDLES_EVENT(USB_Connect);
-
- /** Indicates that this module will catch the USB_Disconnect event when thrown by the library. */
- HANDLES_EVENT(USB_Disconnect);
-
- /** Indicates that this module will catch the USB_ConfigurationChanged event when thrown by the library. */
- HANDLES_EVENT(USB_ConfigurationChanged);
-
- /** Indicates that this module will catch the USB_UnhandledControlPacket event when thrown by the library. */
- HANDLES_EVENT(USB_UnhandledControlPacket);
-
/* Type Defines: */
/** Type define for the virtual serial port line encoding settings, for storing the current USART configuration
* as set by the host via a class specific request.
@@ -185,6 +172,11 @@ TASK(CDC_Task);
/* Function Prototypes: */
+ void EVENT_USB_Connect(void);
+ void EVENT_USB_Disconnect(void);
+ void EVENT_USB_ConfigurationChanged(void);
+ void EVENT_USB_UnhandledControlPacket(void);
+
void UpdateStatus(uint8_t CurrentStatus);
#endif
diff --git a/Demos/Device/CDC/makefile b/Demos/Device/CDC/makefile index ce2436eb8..5755dda1e 100644 --- a/Demos/Device/CDC/makefile +++ b/Demos/Device/CDC/makefile @@ -505,7 +505,7 @@ sizeafter: checkhooks: build
@echo
@echo ------- Unhooked LUFA Events -------
- @$(shell) (grep -s '^Event.*LUFA/.*\\.o' $(TARGET).map | \
+ @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
@echo ------------------------------------
diff --git a/Demos/Device/DualCDC/DualCDC.c b/Demos/Device/DualCDC/DualCDC.c index 9750ea23e..34d772ff0 100644 --- a/Demos/Device/DualCDC/DualCDC.c +++ b/Demos/Device/DualCDC/DualCDC.c @@ -118,7 +118,7 @@ int main(void) /** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and
* starts the library USB task to begin the enumeration and USB management process.
*/
-EVENT_HANDLER(USB_Connect)
+void EVENT_USB_Connect(void)
{
/* Start USB management task */
Scheduler_SetTaskMode(USB_USBTask, TASK_RUN);
@@ -130,7 +130,7 @@ EVENT_HANDLER(USB_Connect) /** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
* the status LEDs and stops the USB management and CDC management tasks.
*/
-EVENT_HANDLER(USB_Disconnect)
+void EVENT_USB_Disconnect(void)
{
/* Stop running CDC and USB management tasks */
Scheduler_SetTaskMode(CDC1_Task, TASK_STOP);
@@ -144,7 +144,7 @@ EVENT_HANDLER(USB_Disconnect) /** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
* of the USB device after enumeration - the device endpoints are configured and the CDC management tasks are started.
*/
-EVENT_HANDLER(USB_ConfigurationChanged)
+void EVENT_USB_ConfigurationChanged(void)
{
/* Setup CDC Notification, Rx and Tx Endpoints for the first CDC */
Endpoint_ConfigureEndpoint(CDC1_NOTIFICATION_EPNUM, EP_TYPE_INTERRUPT,
@@ -184,7 +184,7 @@ EVENT_HANDLER(USB_ConfigurationChanged) * control requests that are not handled internally by the USB library (including the CDC control commands,
* which are all issued via the control endpoint), so that they can be handled appropriately for the application.
*/
-EVENT_HANDLER(USB_UnhandledControlPacket)
+void EVENT_USB_UnhandledControlPacket(void)
{
/* Determine which interface's Line Coding data is being set from the wIndex parameter */
uint8_t* LineCodingData = (USB_ControlRequest.wIndex == 0) ? (uint8_t*)&LineCoding1 : (uint8_t*)&LineCoding2;
diff --git a/Demos/Device/DualCDC/DualCDC.h b/Demos/Device/DualCDC/DualCDC.h index 65f661f97..117af601e 100644 --- a/Demos/Device/DualCDC/DualCDC.h +++ b/Demos/Device/DualCDC/DualCDC.h @@ -60,19 +60,6 @@ /** CDC Class specific request to set the current virtual serial port handshake line states. */
#define REQ_SetControlLineState 0x22
- /* Event Handlers: */
- /** Indicates that this module will catch the USB_Connect event when thrown by the library. */
- HANDLES_EVENT(USB_Connect);
-
- /** Indicates that this module will catch the USB_Disconnect event when thrown by the library. */
- HANDLES_EVENT(USB_Disconnect);
-
- /** Indicates that this module will catch the USB_ConfigurationChanged event when thrown by the library. */
- HANDLES_EVENT(USB_ConfigurationChanged);
-
- /** Indicates that this module will catch the USB_UnhandledControlPacket event when thrown by the library. */
- HANDLES_EVENT(USB_UnhandledControlPacket);
-
/* Type Defines: */
/** Type define for the virtual serial port line encoding settings, for storing the current USART configuration
* as set by the host via a class specific request.
@@ -121,6 +108,11 @@ TASK(CDC2_Task);
/* Function Prototypes: */
+ void EVENT_USB_Connect(void);
+ void EVENT_USB_Disconnect(void);
+ void EVENT_USB_ConfigurationChanged(void);
+ void EVENT_USB_UnhandledControlPacket(void);
+
void UpdateStatus(uint8_t CurrentStatus);
#endif
diff --git a/Demos/Device/DualCDC/makefile b/Demos/Device/DualCDC/makefile index fc0005d66..75099c533 100644 --- a/Demos/Device/DualCDC/makefile +++ b/Demos/Device/DualCDC/makefile @@ -505,7 +505,7 @@ sizeafter: checkhooks: build
@echo
@echo ------- Unhooked LUFA Events -------
- @$(shell) (grep -s '^Event.*LUFA/.*\\.o' $(TARGET).map | \
+ @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
@echo ------------------------------------
diff --git a/Demos/Device/GenericHID/GenericHID.c b/Demos/Device/GenericHID/GenericHID.c index 0369f9f52..f43499a0f 100644 --- a/Demos/Device/GenericHID/GenericHID.c +++ b/Demos/Device/GenericHID/GenericHID.c @@ -75,7 +75,7 @@ int main(void) /** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and
* starts the library USB task to begin the enumeration and USB management process.
*/
-EVENT_HANDLER(USB_Connect)
+void EVENT_USB_Connect(void)
{
/* Start USB management task */
Scheduler_SetTaskMode(USB_USBTask, TASK_RUN);
@@ -87,7 +87,7 @@ EVENT_HANDLER(USB_Connect) /** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
* the status LEDs and stops the USB management task.
*/
-EVENT_HANDLER(USB_Disconnect)
+void EVENT_USB_Disconnect(void)
{
/* Stop running HID reporting and USB management tasks */
Scheduler_SetTaskMode(USB_HID_Report, TASK_STOP);
@@ -100,7 +100,7 @@ EVENT_HANDLER(USB_Disconnect) /** Event handler for the USB_ConfigurationChanged event. This is fired when the host sets the current configuration
* of the USB device after enumeration, and configures the generic HID device endpoints.
*/
-EVENT_HANDLER(USB_ConfigurationChanged)
+void EVENT_USB_ConfigurationChanged(void)
{
/* Setup Generic IN Report Endpoint */
Endpoint_ConfigureEndpoint(GENERIC_IN_EPNUM, EP_TYPE_INTERRUPT,
@@ -120,7 +120,7 @@ EVENT_HANDLER(USB_ConfigurationChanged) * control requests that are not handled internally by the USB library (including the HID commands, which are
* all issued via the control endpoint), so that they can be handled appropriately for the application.
*/
-EVENT_HANDLER(USB_UnhandledControlPacket)
+void EVENT_USB_UnhandledControlPacket(void)
{
/* Handle HID Class specific requests */
switch (USB_ControlRequest.bRequest)
diff --git a/Demos/Device/GenericHID/GenericHID.h b/Demos/Device/GenericHID/GenericHID.h index 5841595e3..30354b756 100644 --- a/Demos/Device/GenericHID/GenericHID.h +++ b/Demos/Device/GenericHID/GenericHID.h @@ -67,20 +67,15 @@ Status_USBReady = 2, /**< USB interface is connected and ready */
};
- /* Event Handlers: */
- /** Indicates that this module will catch the USB_Connect event when thrown by the library. */
- HANDLES_EVENT(USB_Connect);
-
- /** Indicates that this module will catch the USB_Disconnect event when thrown by the library. */
- HANDLES_EVENT(USB_Disconnect);
-
- /** Indicates that this module will catch the USB_ConfigurationChanged event when thrown by the library. */
- HANDLES_EVENT(USB_ConfigurationChanged);
-
/* Task Definitions: */
TASK(USB_HID_Report);
/* Function Prototypes: */
+ void EVENT_USB_Connect(void);
+ void EVENT_USB_Disconnect(void);
+ void EVENT_USB_ConfigurationChanged(void);
+ void EVENT_USB_UnhandledControlPacket(void);
+
void UpdateStatus(uint8_t CurrentStatus);
void ProcessGenericHIDReport(uint8_t* DataArray);
void CreateGenericHIDReport(uint8_t* DataArray);
diff --git a/Demos/Device/GenericHID/makefile b/Demos/Device/GenericHID/makefile index 23d27911c..c70c6a123 100644 --- a/Demos/Device/GenericHID/makefile +++ b/Demos/Device/GenericHID/makefile @@ -504,7 +504,7 @@ sizeafter: checkhooks: build
@echo
@echo ------- Unhooked LUFA Events -------
- @$(shell) (grep -s '^Event.*LUFA/.*\\.o' $(TARGET).map | \
+ @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
@echo ------------------------------------
diff --git a/Demos/Device/Joystick/Joystick.c b/Demos/Device/Joystick/Joystick.c index e1faeede7..8c50a2c16 100644 --- a/Demos/Device/Joystick/Joystick.c +++ b/Demos/Device/Joystick/Joystick.c @@ -76,7 +76,7 @@ int main(void) /** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and
* starts the library USB task to begin the enumeration and USB management process.
*/
-EVENT_HANDLER(USB_Connect)
+void EVENT_USB_Connect(void)
{
/* Start USB management task */
Scheduler_SetTaskMode(USB_USBTask, TASK_RUN);
@@ -88,7 +88,7 @@ EVENT_HANDLER(USB_Connect) /** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
* the status LEDs and stops the USB management and joystick reporting tasks.
*/
-EVENT_HANDLER(USB_Disconnect)
+void EVENT_USB_Disconnect(void)
{
/* Stop running joystick reporting and USB management tasks */
Scheduler_SetTaskMode(USB_Joystick_Report, TASK_STOP);
@@ -101,7 +101,7 @@ EVENT_HANDLER(USB_Disconnect) /** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
* of the USB device after enumeration - the device endpoints are configured and the joystick reporting task started.
*/
-EVENT_HANDLER(USB_ConfigurationChanged)
+void EVENT_USB_ConfigurationChanged(void)
{
/* Setup Joystick Report Endpoint */
Endpoint_ConfigureEndpoint(JOYSTICK_EPNUM, EP_TYPE_INTERRUPT,
@@ -119,7 +119,7 @@ EVENT_HANDLER(USB_ConfigurationChanged) * control requests that are not handled internally by the USB library (including the HID commands, which are
* all issued via the control endpoint), so that they can be handled appropriately for the application.
*/
-EVENT_HANDLER(USB_UnhandledControlPacket)
+void EVENT_USB_UnhandledControlPacket(void)
{
/* Handle HID Class specific requests */
switch (USB_ControlRequest.bRequest)
diff --git a/Demos/Device/Joystick/Joystick.h b/Demos/Device/Joystick/Joystick.h index c274b5bc5..9763cada3 100644 --- a/Demos/Device/Joystick/Joystick.h +++ b/Demos/Device/Joystick/Joystick.h @@ -78,20 +78,12 @@ Status_USBReady = 2, /**< USB interface is connected and ready */
};
- /* Event Handlers: */
- /** Indicates that this module will catch the USB_Connect event when thrown by the library. */
- HANDLES_EVENT(USB_Connect);
-
- /** Indicates that this module will catch the USB_Disconnect event when thrown by the library. */
- HANDLES_EVENT(USB_Disconnect);
-
- /** Indicates that this module will catch the USB_ConfigurationChanged event when thrown by the library. */
- HANDLES_EVENT(USB_ConfigurationChanged);
-
- /** Indicates that this module will catch the USB_UnhandledControlPacket event when thrown by the library. */
- HANDLES_EVENT(USB_UnhandledControlPacket);
-
/* Function Prototypes: */
+ void EVENT_USB_Connect(void);
+ void EVENT_USB_Disconnect(void);
+ void EVENT_USB_ConfigurationChanged(void);
+ void EVENT_USB_UnhandledControlPacket(void);
+
bool GetNextReport(USB_JoystickReport_Data_t* ReportData);
void UpdateStatus(uint8_t CurrentStatus);
diff --git a/Demos/Device/Joystick/makefile b/Demos/Device/Joystick/makefile index 9ab8ec274..7550ed33b 100644 --- a/Demos/Device/Joystick/makefile +++ b/Demos/Device/Joystick/makefile @@ -505,7 +505,7 @@ sizeafter: checkhooks: build
@echo
@echo ------- Unhooked LUFA Events -------
- @$(shell) (grep -s '^Event.*LUFA/.*\\.o' $(TARGET).map | \
+ @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
@echo ------------------------------------
diff --git a/Demos/Device/Keyboard/Keyboard.c b/Demos/Device/Keyboard/Keyboard.c index fe041ef08..6abd193f4 100644 --- a/Demos/Device/Keyboard/Keyboard.c +++ b/Demos/Device/Keyboard/Keyboard.c @@ -100,7 +100,7 @@ int main(void) /** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and
* starts the library USB task to begin the enumeration and USB management process.
*/
-EVENT_HANDLER(USB_Connect)
+void EVENT_USB_Connect(void)
{
/* Start USB management task */
Scheduler_SetTaskMode(USB_USBTask, TASK_RUN);
@@ -115,7 +115,7 @@ EVENT_HANDLER(USB_Connect) /** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
* the status LEDs.
*/
-EVENT_HANDLER(USB_Disconnect)
+void EVENT_USB_Disconnect(void)
{
/* Stop running keyboard reporting and USB management tasks */
Scheduler_SetTaskMode(USB_Keyboard_Report, TASK_STOP);
@@ -128,7 +128,7 @@ EVENT_HANDLER(USB_Disconnect) /** Event handler for the USB_ConfigurationChanged event. This is fired when the host sets the current configuration
* of the USB device after enumeration, and configures the keyboard device endpoints.
*/
-EVENT_HANDLER(USB_ConfigurationChanged)
+void EVENT_USB_ConfigurationChanged(void)
{
/* Setup Keyboard Keycode Report Endpoint */
Endpoint_ConfigureEndpoint(KEYBOARD_EPNUM, EP_TYPE_INTERRUPT,
@@ -151,7 +151,7 @@ EVENT_HANDLER(USB_ConfigurationChanged) * control requests that are not handled internally by the USB library (including the HID commands, which are
* all issued via the control endpoint), so that they can be handled appropriately for the application.
*/
-EVENT_HANDLER(USB_UnhandledControlPacket)
+void EVENT_USB_UnhandledControlPacket(void)
{
/* Handle HID Class specific requests */
switch (USB_ControlRequest.bRequest)
@@ -220,7 +220,7 @@ EVENT_HANDLER(USB_UnhandledControlPacket) Endpoint_ClearSETUP();
/* Set or clear the flag depending on what the host indicates that the current Protocol should be */
- UsingReportProtocol = (USB_ControlRequest.wValue != 0x0000);
+ UsingReportProtocol = (USB_ControlRequest.wValue != 0);
/* Acknowledge status stage */
while (!(Endpoint_IsINReady()));
diff --git a/Demos/Device/Keyboard/Keyboard.h b/Demos/Device/Keyboard/Keyboard.h index 2cc9c5ca8..c4ed6e07c 100644 --- a/Demos/Device/Keyboard/Keyboard.h +++ b/Demos/Device/Keyboard/Keyboard.h @@ -55,25 +55,25 @@ /* Macros: */
/** Idle period indicating that reports should be sent only when the inputs have changed */
- #define HID_IDLE_CHANGESONLY 0
+ #define HID_IDLE_CHANGESONLY 0
/** HID Class specific request to get the next HID report from the device. */
- #define REQ_GetReport 0x01
+ #define REQ_GetReport 0x01
/** HID Class specific request to get the idle timeout period of the device. */
- #define REQ_GetIdle 0x02
+ #define REQ_GetIdle 0x02
/** HID Class specific request to send the next HID report to the device. */
- #define REQ_SetReport 0x09
+ #define REQ_SetReport 0x09
/** HID Class specific request to set the idle timeout period of the device. */
- #define REQ_SetIdle 0x0A
+ #define REQ_SetIdle 0x0A
/** HID Class specific request to get the current HID protocol in use, either report or boot. */
- #define REQ_GetProtocol 0x03
+ #define REQ_GetProtocol 0x03
/** HID Class specific request to set the current HID protocol in use, either report or boot. */
- #define REQ_SetProtocol 0x0B
+ #define REQ_SetProtocol 0x0B
/* Task Definitions: */
TASK(USB_Keyboard_Report);
@@ -97,25 +97,17 @@ Status_USBEnumerating = 1, /**< USB interface is enumerating */
Status_USBReady = 2, /**< USB interface is connected and ready */
};
-
- /* Event Handlers: */
- /** Indicates that this module will catch the USB_Connect event when thrown by the library. */
- HANDLES_EVENT(USB_Connect);
-
- /** Indicates that this module will catch the USB_Disconnect event when thrown by the library. */
- HANDLES_EVENT(USB_Disconnect);
-
- /** Indicates that this module will catch the USB_ConfigurationChanged event when thrown by the library. */
- HANDLES_EVENT(USB_ConfigurationChanged);
-
- /** Indicates that this module will catch the USB_UnhandledControlPacket event when thrown by the library. */
- HANDLES_EVENT(USB_UnhandledControlPacket);
/* Function Prototypes: */
+ void EVENT_USB_Connect(void);
+ void EVENT_USB_Disconnect(void);
+ void EVENT_USB_ConfigurationChanged(void);
+ void EVENT_USB_UnhandledControlPacket(void);
+
void CreateKeyboardReport(USB_KeyboardReport_Data_t* ReportData);
void ProcessLEDReport(uint8_t LEDReport);
void SendNextReport(void);
void ReceiveNextReport(void);
void UpdateStatus(uint8_t CurrentStatus);
-
+
#endif
diff --git a/Demos/Device/Keyboard/makefile b/Demos/Device/Keyboard/makefile index bacf6dc57..3c597bf49 100644 --- a/Demos/Device/Keyboard/makefile +++ b/Demos/Device/Keyboard/makefile @@ -504,7 +504,7 @@ sizeafter: checkhooks: build
@echo
@echo ------- Unhooked LUFA Events -------
- @$(shell) (grep -s '^Event.*LUFA/.*\\.o' $(TARGET).map | \
+ @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
@echo ------------------------------------
diff --git a/Demos/Device/KeyboardMouse/KeyboardMouse.c b/Demos/Device/KeyboardMouse/KeyboardMouse.c index 5c9332849..25d633e43 100644 --- a/Demos/Device/KeyboardMouse/KeyboardMouse.c +++ b/Demos/Device/KeyboardMouse/KeyboardMouse.c @@ -84,7 +84,7 @@ int main(void) /** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and
* starts the library USB task to begin the enumeration and USB management process.
*/
-EVENT_HANDLER(USB_Connect)
+void EVENT_USB_Connect(void)
{
/* Start USB management task */
Scheduler_SetTaskMode(USB_USBTask, TASK_RUN);
@@ -96,7 +96,7 @@ EVENT_HANDLER(USB_Connect) /** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
* the status LEDs and stops the USB management task.
*/
-EVENT_HANDLER(USB_Disconnect)
+void EVENT_USB_Disconnect(void)
{
/* Stop running HID reporting and USB management tasks */
Scheduler_SetTaskMode(USB_USBTask, TASK_STOP);
@@ -108,7 +108,7 @@ EVENT_HANDLER(USB_Disconnect) /** Event handler for the USB_ConfigurationChanged event. This is fired when the host sets the current configuration
* of the USB device after enumeration, and configures the keyboard and mouse device endpoints.
*/
-EVENT_HANDLER(USB_ConfigurationChanged)
+void EVENT_USB_ConfigurationChanged(void)
{
/* Setup Keyboard Report Endpoint */
Endpoint_ConfigureEndpoint(KEYBOARD_IN_EPNUM, EP_TYPE_INTERRUPT,
@@ -133,7 +133,7 @@ EVENT_HANDLER(USB_ConfigurationChanged) * control requests that are not handled internally by the USB library (including the HID commands, which are
* all issued via the control endpoint), so that they can be handled appropriately for the application.
*/
-EVENT_HANDLER(USB_UnhandledControlPacket)
+void EVENT_USB_UnhandledControlPacket(void)
{
uint8_t* ReportData;
uint8_t ReportSize;
diff --git a/Demos/Device/KeyboardMouse/KeyboardMouse.h b/Demos/Device/KeyboardMouse/KeyboardMouse.h index 9a1fee1f4..e3f943402 100644 --- a/Demos/Device/KeyboardMouse/KeyboardMouse.h +++ b/Demos/Device/KeyboardMouse/KeyboardMouse.h @@ -95,20 +95,12 @@ int8_t Y; /**< Current mouse delta Y movement, as a signed 8-bit integer */
} USB_MouseReport_Data_t;
- /* Event Handlers: */
- /** Indicates that this module will catch the USB_Connect event when thrown by the library. */
- HANDLES_EVENT(USB_Connect);
-
- /** Indicates that this module will catch the USB_Disconnect event when thrown by the library. */
- HANDLES_EVENT(USB_Disconnect);
-
- /** Indicates that this module will catch the USB_ConfigurationChanged event when thrown by the library. */
- HANDLES_EVENT(USB_ConfigurationChanged);
-
- /** Indicates that this module will catch the USB_UnhandledControlPacket event when thrown by the library. */
- HANDLES_EVENT(USB_UnhandledControlPacket);
-
/* Function Prototypes: */
+ void EVENT_USB_Connect(void);
+ void EVENT_USB_Disconnect(void);
+ void EVENT_USB_ConfigurationChanged(void);
+ void EVENT_USB_UnhandledControlPacket(void);
+
void UpdateStatus(uint8_t CurrentStatus);
#endif
diff --git a/Demos/Device/KeyboardMouse/makefile b/Demos/Device/KeyboardMouse/makefile index e48399877..b26bdbed6 100644 --- a/Demos/Device/KeyboardMouse/makefile +++ b/Demos/Device/KeyboardMouse/makefile @@ -505,7 +505,7 @@ sizeafter: checkhooks: build
@echo
@echo ------- Unhooked LUFA Events -------
- @$(shell) (grep -s '^Event.*LUFA/.*\\.o' $(TARGET).map | \
+ @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
@echo ------------------------------------
diff --git a/Demos/Device/MIDI/MIDI.c b/Demos/Device/MIDI/MIDI.c index 1323e1163..b6b43df6a 100644 --- a/Demos/Device/MIDI/MIDI.c +++ b/Demos/Device/MIDI/MIDI.c @@ -74,7 +74,7 @@ int main(void) }
/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs. */
-EVENT_HANDLER(USB_Connect)
+void EVENT_USB_Connect(void)
{
/* Start USB management task */
Scheduler_SetTaskMode(USB_USBTask, TASK_RUN);
@@ -86,7 +86,7 @@ EVENT_HANDLER(USB_Connect) /** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
* the status LEDs, disables the sample update and PWM output timers and stops the USB and MIDI management tasks.
*/
-EVENT_HANDLER(USB_Disconnect)
+void EVENT_USB_Disconnect(void)
{
/* Stop running audio and USB management tasks */
Scheduler_SetTaskMode(USB_MIDI_Task, TASK_STOP);
@@ -99,7 +99,7 @@ EVENT_HANDLER(USB_Disconnect) /** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
* of the USB device after enumeration - the device endpoints are configured and the MIDI management task started.
*/
-EVENT_HANDLER(USB_ConfigurationChanged)
+void EVENT_USB_ConfigurationChanged(void)
{
/* Setup MIDI stream endpoints */
Endpoint_ConfigureEndpoint(MIDI_STREAM_OUT_EPNUM, EP_TYPE_BULK,
diff --git a/Demos/Device/MIDI/MIDI.h b/Demos/Device/MIDI/MIDI.h index 4d801e82f..635036ae8 100644 --- a/Demos/Device/MIDI/MIDI.h +++ b/Demos/Device/MIDI/MIDI.h @@ -80,17 +80,11 @@ /* Task Definitions: */
TASK(USB_MIDI_Task);
- /* Event Handlers: */
- /** Indicates that this module will catch the USB_Connect event when thrown by the library. */
- HANDLES_EVENT(USB_Connect);
-
- /** Indicates that this module will catch the USB_Disconnect event when thrown by the library. */
- HANDLES_EVENT(USB_Disconnect);
-
- /** Indicates that this module will catch the USB_ConfigurationChanged event when thrown by the library. */
- HANDLES_EVENT(USB_ConfigurationChanged);
-
/* Function Prototypes: */
+ void EVENT_USB_Connect(void);
+ void EVENT_USB_Disconnect(void);
+ void EVENT_USB_ConfigurationChanged(void);
+
void SendMIDINoteChange(const uint8_t Pitch, const bool OnOff,
const uint8_t CableID, const uint8_t Channel);
void UpdateStatus(uint8_t CurrentStatus);
diff --git a/Demos/Device/MIDI/makefile b/Demos/Device/MIDI/makefile index 1ad946e76..89bfc6cc0 100644 --- a/Demos/Device/MIDI/makefile +++ b/Demos/Device/MIDI/makefile @@ -505,7 +505,7 @@ sizeafter: checkhooks: build
@echo
@echo ------- Unhooked LUFA Events -------
- @$(shell) (grep -s '^Event.*LUFA/.*\\.o' $(TARGET).map | \
+ @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
@echo ------------------------------------
diff --git a/Demos/Device/MassStorage/MassStorage.c b/Demos/Device/MassStorage/MassStorage.c index 1da8930b0..82e7e8aa2 100644 --- a/Demos/Device/MassStorage/MassStorage.c +++ b/Demos/Device/MassStorage/MassStorage.c @@ -86,7 +86,7 @@ int main(void) }
/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs. */
-EVENT_HANDLER(USB_Connect)
+void EventHandler_USB_Connect(void)
{
/* Indicate USB enumerating */
UpdateStatus(Status_USBEnumerating);
@@ -98,7 +98,7 @@ EVENT_HANDLER(USB_Connect) /** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
* the status LEDs and stops the Mass Storage management task.
*/
-EVENT_HANDLER(USB_Disconnect)
+void EventHandler_USB_Disconnect(void)
{
/* Stop running mass storage task */
Scheduler_SetTaskMode(USB_MassStorage, TASK_STOP);
@@ -110,7 +110,7 @@ EVENT_HANDLER(USB_Disconnect) /** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
* of the USB device after enumeration - the device endpoints are configured and the Mass Storage management task started.
*/
-EVENT_HANDLER(USB_ConfigurationChanged)
+void EventHandler_USB_ConfigurationChanged(void)
{
/* Setup Mass Storage In and Out Endpoints */
Endpoint_ConfigureEndpoint(MASS_STORAGE_IN_EPNUM, EP_TYPE_BULK,
@@ -132,7 +132,7 @@ EVENT_HANDLER(USB_ConfigurationChanged) * control requests that are not handled internally by the USB library (including the Mass Storage class-specific
* requests) so that they can be handled appropriately for the application.
*/
-EVENT_HANDLER(USB_UnhandledControlPacket)
+void EventHandler_USB_UnhandledControlPacket(void)
{
/* Process UFI specific control requests */
switch (USB_ControlRequest.bRequest)
@@ -283,7 +283,7 @@ static bool ReadInCommandBlock(void) /* Read in command block header */
Endpoint_Read_Stream_LE(&CommandBlock, (sizeof(CommandBlock) - sizeof(CommandBlock.SCSICommandData)),
- AbortOnMassStoreReset);
+ StreamCallback_AbortOnMassStoreReset);
/* Check if the current command is being aborted by the host */
if (IsMassStoreReset)
@@ -305,7 +305,7 @@ static bool ReadInCommandBlock(void) /* Read in command block command data */
Endpoint_Read_Stream_LE(&CommandBlock.SCSICommandData,
CommandBlock.SCSICommandLength,
- AbortOnMassStoreReset);
+ StreamCallback_AbortOnMassStoreReset);
/* Check if the current command is being aborted by the host */
if (IsMassStoreReset)
@@ -346,7 +346,7 @@ static void ReturnCommandStatus(void) /* Write the CSW to the endpoint */
Endpoint_Write_Stream_LE(&CommandStatus, sizeof(CommandStatus),
- AbortOnMassStoreReset);
+ StreamCallback_AbortOnMassStoreReset);
/* Check if the current command is being aborted by the host */
if (IsMassStoreReset)
@@ -359,7 +359,7 @@ static void ReturnCommandStatus(void) /** Stream callback function for the Endpoint stream read and write functions. This callback will abort the current stream transfer
* if a Mass Storage Reset request has been issued to the control endpoint.
*/
-STREAM_CALLBACK(AbortOnMassStoreReset)
+uint8_t StreamCallback_AbortOnMassStoreReset(void)
{
/* Abort if a Mass Storage reset command was received */
if (IsMassStoreReset)
diff --git a/Demos/Device/MassStorage/MassStorage.h b/Demos/Device/MassStorage/MassStorage.h index f0baf1461..afe9872ea 100644 --- a/Demos/Device/MassStorage/MassStorage.h +++ b/Demos/Device/MassStorage/MassStorage.h @@ -130,23 +130,12 @@ /* Task Definitions: */
TASK(USB_MassStorage);
- /* Stream Callbacks: */
- STREAM_CALLBACK(AbortOnMassStoreReset);
-
- /* Event Handlers: */
- /** Indicates that this module will catch the USB_Connect event when thrown by the library. */
- HANDLES_EVENT(USB_Connect);
-
- /** Indicates that this module will catch the USB_Disconnect event when thrown by the library. */
- HANDLES_EVENT(USB_Disconnect);
-
- /** Indicates that this module will catch the USB_ConfigurationChanged event when thrown by the library. */
- HANDLES_EVENT(USB_ConfigurationChanged);
-
- /** Indicates that this module will catch the USB_UnhandledControlPacket event when thrown by the library. */
- HANDLES_EVENT(USB_UnhandledControlPacket);
-
/* Function Prototypes: */
+ void EVENT_USB_Connect(void);
+ void EVENT_USB_Disconnect(void);
+ void EVENT_USB_ConfigurationChanged(void);
+ void EVENT_USB_UnhandledControlPacket(void);
+
void UpdateStatus(uint8_t CurrentStatus);
#if defined(INCLUDE_FROM_MASSSTORAGE_C)
@@ -154,4 +143,6 @@ static void ReturnCommandStatus(void);
#endif
+ uint8_t StreamCallback_AbortOnMassStoreReset(void);
+
#endif
diff --git a/Demos/Device/MassStorage/SCSI.c b/Demos/Device/MassStorage/SCSI.c index a88be515a..5993a546d 100644 --- a/Demos/Device/MassStorage/SCSI.c +++ b/Demos/Device/MassStorage/SCSI.c @@ -166,12 +166,12 @@ static bool SCSI_Command_Inquiry(void) }
/* Write the INQUIRY data to the endpoint */
- Endpoint_Write_Stream_LE(&InquiryData, BytesTransferred, AbortOnMassStoreReset);
+ Endpoint_Write_Stream_LE(&InquiryData, BytesTransferred, StreamCallback_AbortOnMassStoreReset);
uint8_t PadBytes[AllocationLength - BytesTransferred];
/* Pad out remaining bytes with 0x00 */
- Endpoint_Write_Stream_LE(&PadBytes, (AllocationLength - BytesTransferred), AbortOnMassStoreReset);
+ Endpoint_Write_Stream_LE(&PadBytes, (AllocationLength - BytesTransferred), StreamCallback_AbortOnMassStoreReset);
/* Finalize the stream transfer to send the last packet */
Endpoint_ClearIN();
@@ -193,12 +193,12 @@ static bool SCSI_Command_Request_Sense(void) uint8_t BytesTransferred = (AllocationLength < sizeof(SenseData))? AllocationLength : sizeof(SenseData);
/* Send the SENSE data - this indicates to the host the status of the last command */
- Endpoint_Write_Stream_LE(&SenseData, BytesTransferred, AbortOnMassStoreReset);
+ Endpoint_Write_Stream_LE(&SenseData, BytesTransferred, StreamCallback_AbortOnMassStoreReset);
uint8_t PadBytes[AllocationLength - BytesTransferred];
/* Pad out remaining bytes with 0x00 */
- Endpoint_Write_Stream_LE(&PadBytes, (AllocationLength - BytesTransferred), AbortOnMassStoreReset);
+ Endpoint_Write_Stream_LE(&PadBytes, (AllocationLength - BytesTransferred), StreamCallback_AbortOnMassStoreReset);
/* Finalize the stream transfer to send the last packet */
Endpoint_ClearIN();
diff --git a/Demos/Device/MassStorage/makefile b/Demos/Device/MassStorage/makefile index 65a22c6a3..95c91f61d 100644 --- a/Demos/Device/MassStorage/makefile +++ b/Demos/Device/MassStorage/makefile @@ -508,7 +508,7 @@ sizeafter: checkhooks: build
@echo
@echo ------- Unhooked LUFA Events -------
- @$(shell) (grep -s '^Event.*LUFA/.*\\.o' $(TARGET).map | \
+ @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
@echo ------------------------------------
diff --git a/Demos/Device/Mouse/Mouse.c b/Demos/Device/Mouse/Mouse.c index 9dc2f9d04..32b12fc61 100644 --- a/Demos/Device/Mouse/Mouse.c +++ b/Demos/Device/Mouse/Mouse.c @@ -100,7 +100,7 @@ int main(void) /** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and
* starts the library USB task to begin the enumeration and USB management process.
*/
-EVENT_HANDLER(USB_Connect)
+void EVENT_USB_Connect(void)
{
/* Start USB management task */
Scheduler_SetTaskMode(USB_USBTask, TASK_RUN);
@@ -115,7 +115,7 @@ EVENT_HANDLER(USB_Connect) /** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
* the status LEDs and stops the USB management and Mouse reporting tasks.
*/
-EVENT_HANDLER(USB_Disconnect)
+void EVENT_USB_Disconnect(void)
{
/* Stop running mouse reporting and USB management tasks */
Scheduler_SetTaskMode(USB_Mouse_Report, TASK_STOP);
@@ -128,7 +128,7 @@ EVENT_HANDLER(USB_Disconnect) /** Event handler for the USB_ConfigurationChanged event. This is fired when the host sets the current configuration
* of the USB device after enumeration - the device endpoints are configured and the mouse reporting task started.
*/
-EVENT_HANDLER(USB_ConfigurationChanged)
+void EVENT_USB_ConfigurationChanged(void)
{
/* Setup Mouse Report Endpoint */
Endpoint_ConfigureEndpoint(MOUSE_EPNUM, EP_TYPE_INTERRUPT,
@@ -146,7 +146,7 @@ EVENT_HANDLER(USB_ConfigurationChanged) * control requests that are not handled internally by the USB library (including the HID commands, which are
* all issued via the control endpoint), so that they can be handled appropriately for the application.
*/
-EVENT_HANDLER(USB_UnhandledControlPacket)
+void EVENT_USB_UnhandledControlPacket(void)
{
/* Handle HID Class specific requests */
switch (USB_ControlRequest.bRequest)
@@ -195,7 +195,7 @@ EVENT_HANDLER(USB_UnhandledControlPacket) Endpoint_ClearSETUP();
/* Set or clear the flag depending on what the host indicates that the current Protocol should be */
- UsingReportProtocol = (USB_ControlRequest.wValue != 0x0000);
+ UsingReportProtocol = (USB_ControlRequest.wValue != 0);
/* Acknowledge status stage */
while (!(Endpoint_IsINReady()));
diff --git a/Demos/Device/Mouse/Mouse.h b/Demos/Device/Mouse/Mouse.h index 3bbbac234..65879da8e 100644 --- a/Demos/Device/Mouse/Mouse.h +++ b/Demos/Device/Mouse/Mouse.h @@ -98,20 +98,12 @@ Status_USBReady = 2, /**< USB interface is connected and ready */
};
- /* Event Handlers: */
- /** Indicates that this module will catch the USB_Connect event when thrown by the library. */
- HANDLES_EVENT(USB_Connect);
-
- /** Indicates that this module will catch the USB_Disconnect event when thrown by the library. */
- HANDLES_EVENT(USB_Disconnect);
-
- /** Indicates that this module will catch the USB_ConfigurationChanged event when thrown by the library. */
- HANDLES_EVENT(USB_ConfigurationChanged);
-
- /** Indicates that this module will catch the USB_UnhandledControlPacket event when thrown by the library. */
- HANDLES_EVENT(USB_UnhandledControlPacket);
-
/* Function Prototypes: */
+ void EVENT_USB_Connect(void);
+ void EVENT_USB_Disconnect(void);
+ void EVENT_USB_ConfigurationChanged(void);
+ void EVENT_USB_UnhandledControlPacket(void);
+
void CreateMouseReport(USB_MouseReport_Data_t* ReportData);
void UpdateStatus(uint8_t CurrentStatus);
diff --git a/Demos/Device/Mouse/makefile b/Demos/Device/Mouse/makefile index 3fa887b7b..d5ad21145 100644 --- a/Demos/Device/Mouse/makefile +++ b/Demos/Device/Mouse/makefile @@ -504,7 +504,7 @@ sizeafter: checkhooks: build
@echo
@echo ------- Unhooked LUFA Events -------
- @$(shell) (grep -s '^Event.*LUFA/.*\\.o' $(TARGET).map | \
+ @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
@echo ------------------------------------
diff --git a/Demos/Device/RNDISEthernet/RNDISEthernet.c b/Demos/Device/RNDISEthernet/RNDISEthernet.c index fd88ecf89..b046f7870 100644 --- a/Demos/Device/RNDISEthernet/RNDISEthernet.c +++ b/Demos/Device/RNDISEthernet/RNDISEthernet.c @@ -83,7 +83,7 @@ int main(void) /** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and
* starts the library USB task to begin the enumeration and USB management process.
*/
-EVENT_HANDLER(USB_Connect)
+void EVENT_USB_Connect(void)
{
/* Start USB management task */
Scheduler_SetTaskMode(USB_USBTask, TASK_RUN);
@@ -95,7 +95,7 @@ EVENT_HANDLER(USB_Connect) /** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
* the status LEDs and stops all the relevant tasks.
*/
-EVENT_HANDLER(USB_Disconnect)
+void EVENT_USB_Disconnect(void)
{
/* Stop running TCP/IP and USB management tasks */
Scheduler_SetTaskMode(RNDIS_Task, TASK_STOP);
@@ -110,7 +110,7 @@ EVENT_HANDLER(USB_Disconnect) /** Event handler for the USB_ConfigurationChanged event. This is fired when the host sets the current configuration
* of the USB device after enumeration, and configures the RNDIS device endpoints and starts the relevant tasks.
*/
-EVENT_HANDLER(USB_ConfigurationChanged)
+void EVENT_USB_ConfigurationChanged(void)
{
/* Setup CDC Notification, Rx and Tx Endpoints */
Endpoint_ConfigureEndpoint(CDC_TX_EPNUM, EP_TYPE_BULK,
@@ -138,7 +138,7 @@ EVENT_HANDLER(USB_ConfigurationChanged) * control requests that are not handled internally by the USB library (including the RNDIS control commands,
* which set up the USB RNDIS network adapter), so that they can be handled appropriately for the application.
*/
-EVENT_HANDLER(USB_UnhandledControlPacket)
+void EVENT_USB_UnhandledControlPacket(void)
{
/* Process RNDIS class commands */
switch (USB_ControlRequest.bRequest)
diff --git a/Demos/Device/RNDISEthernet/RNDISEthernet.h b/Demos/Device/RNDISEthernet/RNDISEthernet.h index b3fd4dbd5..7c3c8dabe 100644 --- a/Demos/Device/RNDISEthernet/RNDISEthernet.h +++ b/Demos/Device/RNDISEthernet/RNDISEthernet.h @@ -60,19 +60,6 @@ /* Macros: */
/** Notification value to indicate that a frame is ready to be read by the host. */
#define NOTIF_RESPONSE_AVAILABLE 0x01
-
- /* Event Handlers: */
- /** Indicates that this module will catch the USB_Connect event when thrown by the library. */
- HANDLES_EVENT(USB_Connect);
-
- /** Indicates that this module will catch the USB_Disconnect event when thrown by the library. */
- HANDLES_EVENT(USB_Disconnect);
-
- /** Indicates that this module will catch the USB_ConfigurationChanged event when thrown by the library. */
- HANDLES_EVENT(USB_ConfigurationChanged);
-
- /** Indicates that this module will catch the USB_UnhandledControlPacket event when thrown by the library. */
- HANDLES_EVENT(USB_UnhandledControlPacket);
/* Type Defines: */
/** Type define for a RNDIS notification message, for transmission to the RNDIS host via the notification
@@ -102,6 +89,11 @@ TASK(Ethernet_Task);
/* Function Prototypes: */
+ void EVENT_USB_Connect(void);
+ void EVENT_USB_Disconnect(void);
+ void EVENT_USB_ConfigurationChanged(void);
+ void EVENT_USB_UnhandledControlPacket(void);
+
void UpdateStatus(uint8_t CurrentStatus);
#endif
diff --git a/Demos/Device/RNDISEthernet/makefile b/Demos/Device/RNDISEthernet/makefile index 7a9722bbf..e46b13bf2 100644 --- a/Demos/Device/RNDISEthernet/makefile +++ b/Demos/Device/RNDISEthernet/makefile @@ -518,7 +518,7 @@ sizeafter: checkhooks: build
@echo
@echo ------- Unhooked LUFA Events -------
- @$(shell) (grep -s '^Event.*LUFA/.*\\.o' $(TARGET).map | \
+ @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
@echo ------------------------------------
diff --git a/Demos/Device/USBtoSerial/USBtoSerial.c b/Demos/Device/USBtoSerial/USBtoSerial.c index ea8dcd599..ef51a6eeb 100644 --- a/Demos/Device/USBtoSerial/USBtoSerial.c +++ b/Demos/Device/USBtoSerial/USBtoSerial.c @@ -93,7 +93,7 @@ int main(void) /** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and
* starts the library USB task to begin the enumeration and USB management process.
*/
-EVENT_HANDLER(USB_Connect)
+void EVENT_USB_Connect(void)
{
/* Start USB management task */
Scheduler_SetTaskMode(USB_USBTask, TASK_RUN);
@@ -105,7 +105,7 @@ EVENT_HANDLER(USB_Connect) /** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
* the status LEDs and stops the USB management and CDC management tasks.
*/
-EVENT_HANDLER(USB_Disconnect)
+void EVENT_USB_Disconnect(void)
{
/* Stop running CDC and USB management tasks */
Scheduler_SetTaskMode(CDC_Task, TASK_STOP);
@@ -122,7 +122,7 @@ EVENT_HANDLER(USB_Disconnect) /** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
* of the USB device after enumeration - the device endpoints are configured and the CDC management task started.
*/
-EVENT_HANDLER(USB_ConfigurationChanged)
+void EVENT_USB_ConfigurationChanged(void)
{
/* Setup CDC Notification, Rx and Tx Endpoints */
Endpoint_ConfigureEndpoint(CDC_NOTIFICATION_EPNUM, EP_TYPE_INTERRUPT,
@@ -148,7 +148,7 @@ EVENT_HANDLER(USB_ConfigurationChanged) * control requests that are not handled internally by the USB library (including the CDC control commands,
* which are all issued via the control endpoint), so that they can be handled appropriately for the application.
*/
-EVENT_HANDLER(USB_UnhandledControlPacket)
+void EVENT_USB_UnhandledControlPacket(void)
{
uint8_t* LineCodingData = (uint8_t*)&LineCoding;
diff --git a/Demos/Device/USBtoSerial/USBtoSerial.h b/Demos/Device/USBtoSerial/USBtoSerial.h index 0352f5d75..cd1f42c3f 100644 --- a/Demos/Device/USBtoSerial/USBtoSerial.h +++ b/Demos/Device/USBtoSerial/USBtoSerial.h @@ -112,19 +112,6 @@ */
#define CONTROL_LINE_IN_OVERRUNERROR (1 << 6)
- /* Event Handlers: */
- /** Indicates that this module will catch the USB_Connect event when thrown by the library. */
- HANDLES_EVENT(USB_Connect);
-
- /** Indicates that this module will catch the USB_Disconnect event when thrown by the library. */
- HANDLES_EVENT(USB_Disconnect);
-
- /** Indicates that this module will catch the USB_ConfigurationChanged event when thrown by the library. */
- HANDLES_EVENT(USB_ConfigurationChanged);
-
- /** Indicates that this module will catch the USB_UnhandledControlPacket event when thrown by the library. */
- HANDLES_EVENT(USB_UnhandledControlPacket);
-
/* Type Defines: */
/** Type define for the virtual serial port line encoding settings, for storing the current USART configuration
* as set by the host via a class specific request.
@@ -186,6 +173,11 @@ TASK(CDC_Task);
/* Function Prototypes: */
+ void EVENT_USB_Connect(void);
+ void EVENT_USB_Disconnect(void);
+ void EVENT_USB_ConfigurationChanged(void);
+ void EVENT_USB_UnhandledControlPacket(void);
+
void ReconfigureUSART(void);
void UpdateStatus(uint8_t CurrentStatus);
diff --git a/Demos/Device/USBtoSerial/makefile b/Demos/Device/USBtoSerial/makefile index 6f7f64182..8808abe2f 100644 --- a/Demos/Device/USBtoSerial/makefile +++ b/Demos/Device/USBtoSerial/makefile @@ -506,7 +506,7 @@ sizeafter: checkhooks: build
@echo
@echo ------- Unhooked LUFA Events -------
- @$(shell) (grep -s '^Event.*LUFA/.*\\.o' $(TARGET).map | \
+ @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
echo "(None)"
@echo ------------------------------------
|