diff options
Diffstat (limited to 'Demos/Host/Incomplete/BluetoothHost')
6 files changed, 134 insertions, 29 deletions
diff --git a/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.c b/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.c index 4c94eaaba..f0d9c1a8a 100644 --- a/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.c +++ b/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.c @@ -43,7 +43,7 @@ *
* This routine searches for a BT interface descriptor containing bulk IN and OUT data endpoints.
*
- * \return An error code from the \ref Bluetooth_GetConfigDescriptorDataCodes_t enum.
+ * \return An error code from the \ref BluetoothHost_GetConfigDescriptorDataCodes_t enum.
*/
uint8_t ProcessConfigurationDescriptor(void)
{
diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.c b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.c index df831fd0d..45fad7bd7 100644 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.c +++ b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.c @@ -208,7 +208,7 @@ Bluetooth_Channel_t* Bluetooth_OpenChannel(uint16_t PSM) if (Bluetooth_Connection.Channels[i].State == Channel_Closed)
{
ChannelData = &Bluetooth_Connection.Channels[i];
- ChannelData->LocalNumber = (BLUETOOTH_CHANNELNUMBER_BASEOFFSET + i);
+ ChannelData->LocalNumber = (BT_CHANNELNUMBER_BASEOFFSET + i);
break;
}
}
@@ -292,7 +292,7 @@ static inline void Bluetooth_Signal_ConnectionReq(BT_ACL_Header_t* ACLPac if (Bluetooth_Connection.Channels[i].State == Channel_Closed)
{
ChannelData = &Bluetooth_Connection.Channels[i];
- ChannelData->LocalNumber = (BLUETOOTH_CHANNELNUMBER_BASEOFFSET + i);
+ ChannelData->LocalNumber = (BT_CHANNELNUMBER_BASEOFFSET + i);
break;
}
}
diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.h b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.h index 40f2bbdcd..012fbc0f9 100644 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.h +++ b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.h @@ -44,6 +44,8 @@ #define BT_ACL_DEBUG(l, s, ...) do { if (ACL_DEBUG_LEVEL >= l) printf_P(PSTR("(ACL) " s "\r\n"), __VA_ARGS__); } while (0)
#define ACL_DEBUG_LEVEL 1
+ #define BT_CHANNELNUMBER_BASEOFFSET 0x0040
+
#define BT_CHANNEL_SIGNALING 0x0001
#define BT_CHANNEL_CONNECTIONLESS 0x0002
diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothHCICommands.c b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothHCICommands.c index 3d5b14a4c..d15439101 100644 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothHCICommands.c +++ b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothHCICommands.c @@ -31,14 +31,23 @@ #define INCLUDE_FROM_BLUETOOTHHCICOMMANDS_C
#include "BluetoothHCICommands.h"
-static BT_HCICommand_Header_t HCICommandHeader;
+/** Current processing state of the HCI portion of the Bluetooth stack. */
+uint8_t Bluetooth_HCIProcessingState;
- uint8_t Bluetooth_HCIProcessingState;
-static uint8_t Bluetooth_HCINextState;
-static uint8_t Bluetooth_TempDeviceAddress[6];
+/** Next HCI state to enter once the last issued HCI command has completed. */
+static uint8_t Bluetooth_HCINextState;
+/** Temporary Bluetooth Device Address, for HCI responses which much include the detination address */
+static uint8_t Bluetooth_TempDeviceAddress[6];
+
+
+/** Bluetooth HCI processing task. This task should be called repeatedly the main Bluetooth
+ * stack task to manage the HCI processing state.
+ */
void Bluetooth_HCITask(void)
{
+ BT_HCICommand_Header_t HCICommandHeader;
+
switch (Bluetooth_HCIProcessingState)
{
case Bluetooth_ProcessEvents:
@@ -58,18 +67,27 @@ void Bluetooth_HCITask(void) /* Read in the event parameters into the temporary buffer */
Pipe_Read_Stream_LE(&EventParams, HCIEventHeader.ParameterLength);
Pipe_ClearIN();
+
+ BT_HCI_DEBUG(1, "Event Received (0x%02X)", HCIEventHeader.EventCode);
switch (HCIEventHeader.EventCode)
{
case EVENT_COMMAND_COMPLETE:
+ BT_HCI_DEBUG(1, "<< Command Complete", NULL);
Bluetooth_HCIProcessingState = Bluetooth_HCINextState;
break;
case EVENT_COMMAND_STATUS:
+ BT_HCI_DEBUG(1, "<< Command Status", NULL);
+ BT_HCI_DEBUG(2, "-- Status Code: 0x%02X", (((BT_HCIEvent_CommandStatus_t*)&EventParams)->Status));
+
/* If the execution of a command failed, reset the stack */
if (((BT_HCIEvent_CommandStatus_t*)&EventParams)->Status)
Bluetooth_HCIProcessingState = Bluetooth_Init;
break;
case EVENT_CONNECTION_REQUEST:
+ BT_HCI_DEBUG(1, "<< Connection Request", NULL);
+ BT_HCI_DEBUG(2, "-- Link Type: 0x%02X", (((BT_HCIEvent_ConnectionRequest_t*)&EventParams)->LinkType));
+
/* Need to store the remote device's BT address in a temporary buffer for later use */
memcpy(Bluetooth_TempDeviceAddress,
&((BT_HCIEvent_ConnectionRequest_t*)&EventParams)->RemoteAddress,
@@ -82,8 +100,14 @@ void Bluetooth_HCITask(void) Bluetooth_HCIProcessingState = (Bluetooth_Connection.IsConnected || !(IsACLConnection) ||
!(Bluetooth_ConnectionRequest(Bluetooth_TempDeviceAddress))) ?
Bluetooth_Conn_RejectConnection : Bluetooth_Conn_AcceptConnection;
+
+ BT_HCI_DEBUG(2, "-- Connection %S", (Bluetooth_HCIProcessingState == Bluetooth_Conn_RejectConnection) ?
+ PSTR("REJECTED") : PSTR("ACCEPTED"));
+
break;
case EVENT_PIN_CODE_REQUEST:
+ BT_HCI_DEBUG(1, "<< Pin Code Request", NULL);
+
/* Need to store the remote device's BT address in a temporary buffer for later use */
memcpy(Bluetooth_TempDeviceAddress,
&((BT_HCIEvent_PinCodeReq_t*)&EventParams)->RemoteAddress,
@@ -91,7 +115,20 @@ void Bluetooth_HCITask(void) Bluetooth_HCIProcessingState = Bluetooth_Conn_SendPINCode;
break;
+ case EVENT_LINK_KEY_REQUEST:
+ BT_HCI_DEBUG(1, "<< Link Key Request", NULL);
+
+ /* Need to store the remote device's BT address in a temporary buffer for later use */
+ memcpy(Bluetooth_TempDeviceAddress,
+ &((BT_HCIEvent_LinkKeyReq_t*)&EventParams)->RemoteAddress,
+ sizeof(Bluetooth_TempDeviceAddress));
+
+ Bluetooth_HCIProcessingState = Bluetooth_Conn_SendLinkKeyNAK;
+ break;
case EVENT_CONNECTION_COMPLETE:
+ BT_HCI_DEBUG(1, "<< Connection Complete", NULL);
+ BT_HCI_DEBUG(2, "-- Handle: 0x%04X", ((BT_HCIEvent_ConnectionComplete_t*)&EventParams)->ConnectionHandle);
+
/* Need to store the remote device's BT address in a temporary buffer for later use */
memcpy(Bluetooth_Connection.RemoteAddress,
&((BT_HCIEvent_ConnectionComplete_t*)&EventParams)->RemoteAddress,
@@ -104,13 +141,15 @@ void Bluetooth_HCITask(void) Bluetooth_ConnectionComplete();
break;
case EVENT_DISCONNECTION_COMPLETE:
+ BT_HCI_DEBUG(1, "<< Disconnection Complete", NULL);
+
/* Device disconnected, indicate connection information no longer valid */
Bluetooth_Connection.IsConnected = false;
Bluetooth_DisconnectionComplete();
Bluetooth_HCIProcessingState = Bluetooth_Init;
- break;
+ break;
}
}
@@ -118,12 +157,16 @@ void Bluetooth_HCITask(void) break;
case Bluetooth_Init:
+ BT_HCI_DEBUG(1, "# Init", NULL);
+
/* Reset the connection information structure to destroy any previous connection state */
memset(&Bluetooth_Connection, 0x00, sizeof(Bluetooth_Connection));
Bluetooth_HCIProcessingState = Bluetooth_Init_Reset;
break;
case Bluetooth_Init_Reset:
+ BT_HCI_DEBUG(1, "# Reset", NULL);
+
HCICommandHeader = (BT_HCICommand_Header_t)
{
OpCode: {OGF: OGF_CTRLR_BASEBAND, OCF: OCF_CTRLR_BASEBAND_RESET},
@@ -131,12 +174,14 @@ void Bluetooth_HCITask(void) };
/* Send the command to reset the bluetooth dongle controller */
- Bluetooth_SendHCICommand(NULL, 0);
+ Bluetooth_SendHCICommand(&HCICommandHeader, NULL, 0);
Bluetooth_HCINextState = Bluetooth_Init_SetLocalName;
Bluetooth_HCIProcessingState = Bluetooth_ProcessEvents;
break;
case Bluetooth_Init_SetLocalName:
+ BT_HCI_DEBUG(1, "# Set Local Name", NULL);
+
HCICommandHeader = (BT_HCICommand_Header_t)
{
OpCode: {OGF: OGF_CTRLR_BASEBAND, OCF: OCF_CTRLR_BASEBAND_WRITE_LOCAL_NAME},
@@ -144,12 +189,14 @@ void Bluetooth_HCITask(void) };
/* Send the command to set the bluetooth dongle's name for other devices to see */
- Bluetooth_SendHCICommand(Bluetooth_DeviceConfiguration.Name, strlen(Bluetooth_DeviceConfiguration.Name));
+ Bluetooth_SendHCICommand(&HCICommandHeader, Bluetooth_DeviceConfiguration.Name, strlen(Bluetooth_DeviceConfiguration.Name));
Bluetooth_HCINextState = Bluetooth_Init_SetDeviceClass;
Bluetooth_HCIProcessingState = Bluetooth_ProcessEvents;
break;
case Bluetooth_Init_SetDeviceClass:
+ BT_HCI_DEBUG(1, "# Set Device Class", NULL);
+
HCICommandHeader = (BT_HCICommand_Header_t)
{
OpCode: {OGF: OGF_CTRLR_BASEBAND, OCF: OCF_CTRLR_BASEBAND_WRITE_CLASS_OF_DEVICE},
@@ -157,12 +204,14 @@ void Bluetooth_HCITask(void) };
/* Send the command to set the class of the device for other devices to see */
- Bluetooth_SendHCICommand(&Bluetooth_DeviceConfiguration.Class, 3);
+ Bluetooth_SendHCICommand(&HCICommandHeader, &Bluetooth_DeviceConfiguration.Class, 3);
Bluetooth_HCINextState = Bluetooth_Init_WriteScanEnable;
Bluetooth_HCIProcessingState = Bluetooth_ProcessEvents;
break;
case Bluetooth_Init_WriteScanEnable:
+ BT_HCI_DEBUG(1, "# Write Scan Enable", NULL);
+
HCICommandHeader = (BT_HCICommand_Header_t)
{
OpCode: {OGF: OGF_CTRLR_BASEBAND, OCF: OCF_CTRLR_BASEBAND_WRITE_SCAN_ENABLE},
@@ -172,12 +221,14 @@ void Bluetooth_HCITask(void) uint8_t Interval = BT_SCANMODE_InquiryAndPageScans;
/* Send the command to set the remote device scanning mode */
- Bluetooth_SendHCICommand(&Interval, 1);
+ Bluetooth_SendHCICommand(&HCICommandHeader, &Interval, 1);
Bluetooth_HCINextState = Bluetooth_ProcessEvents;
Bluetooth_HCIProcessingState = Bluetooth_ProcessEvents;
break;
case Bluetooth_Conn_AcceptConnection:
+ BT_HCI_DEBUG(1, "# Accept Connection", NULL);
+
HCICommandHeader = (BT_HCICommand_Header_t)
{
OpCode: {OGF: OGF_LINK_CONTROL, OCF: OCF_LINK_CONTROL_ACCEPT_CONNECTION_REQUEST},
@@ -192,11 +243,13 @@ void Bluetooth_HCITask(void) AcceptConnectionParams.SlaveRole = true;
/* Send the command to accept the remote connection request */
- Bluetooth_SendHCICommand(&AcceptConnectionParams, sizeof(BT_HCICommand_AcceptConnectionReq_t));
+ Bluetooth_SendHCICommand(&HCICommandHeader, &AcceptConnectionParams, sizeof(BT_HCICommand_AcceptConnectionReq_t));
Bluetooth_HCIProcessingState = Bluetooth_ProcessEvents;
break;
case Bluetooth_Conn_RejectConnection:
+ BT_HCI_DEBUG(1, "# Reject Connection", NULL);
+
HCICommandHeader = (BT_HCICommand_Header_t)
{
OpCode: {OGF: OGF_LINK_CONTROL, OCF: OCF_LINK_CONTROL_REJECT_CONNECTION_REQUEST},
@@ -210,11 +263,13 @@ void Bluetooth_HCITask(void) RejectConnectionParams.Reason = Bluetooth_Connection.IsConnected ? ERROR_LIMITED_RESOURCES : ERROR_UNACCEPTABLE_BDADDR;
/* Send the command to reject the remote connection request */
- Bluetooth_SendHCICommand(&RejectConnectionParams, sizeof(BT_HCICommand_RejectConnectionReq_t));
+ Bluetooth_SendHCICommand(&HCICommandHeader, &RejectConnectionParams, sizeof(BT_HCICommand_RejectConnectionReq_t));
Bluetooth_HCIProcessingState = Bluetooth_ProcessEvents;
break;
case Bluetooth_Conn_SendPINCode:
+ BT_HCI_DEBUG(1, "# Send Pin Code", NULL);
+
HCICommandHeader = (BT_HCICommand_Header_t)
{
OpCode: {OGF: OGF_LINK_CONTROL, OCF: OCF_LINK_CONTROL_PIN_CODE_REQUEST_REPLY},
@@ -229,17 +284,43 @@ void Bluetooth_HCITask(void) memcpy(PINCodeRequestParams.PINCode, Bluetooth_DeviceConfiguration.PINCode, sizeof(PINCodeRequestParams.PINCode));
/* Send the command to transmit the device's local PIN number for authentication */
- Bluetooth_SendHCICommand(&PINCodeRequestParams, sizeof(BT_HCICommand_PinCodeResp_t));
+ Bluetooth_SendHCICommand(&HCICommandHeader, &PINCodeRequestParams, sizeof(BT_HCICommand_PinCodeResp_t));
+
+ Bluetooth_HCIProcessingState = Bluetooth_ProcessEvents;
+ break;
+ case Bluetooth_Conn_SendLinkKeyNAK:
+ BT_HCI_DEBUG(1, "# Send Link Key NAK", NULL);
+
+ HCICommandHeader = (BT_HCICommand_Header_t)
+ {
+ OpCode: {OGF: OGF_LINK_CONTROL, OCF: OCF_LINK_CONTROL_LINK_KEY_REQUEST_NEG_REPLY},
+ ParameterLength: sizeof(BT_HCICommand_LinkKeyNAKResp_t),
+ };
+
+ /* Copy over the temporary BT device address saved from the Link Key Request event */
+ BT_HCICommand_LinkKeyNAKResp_t LinkKeyNAKParams;
+ memcpy(LinkKeyNAKParams.RemoteAddress, Bluetooth_TempDeviceAddress, sizeof(LinkKeyNAKParams.RemoteAddress));
+
+ /* Send the command to transmit the link key NAK to the receiver */
+ Bluetooth_SendHCICommand(&HCICommandHeader, &LinkKeyNAKParams, sizeof(BT_HCICommand_LinkKeyNAKResp_t));
Bluetooth_HCIProcessingState = Bluetooth_ProcessEvents;
break;
}
}
-static uint8_t Bluetooth_SendHCICommand(void* Parameters, uint16_t ParameterLength)
+/** Sends a Bluetooth HCI control command to the attached Bluetooth device.
+ *
+ * \param HCICommandHeader HCI command header to send to the attached device
+ * \param Parameters Pointer to the source of the control parameters (if any)
+ * \param ParameterLength Length of the parameters to send in bytes
+ *
+ * \return A value from the USB_Host_SendControlErrorCodes_t enum.
+ */
+static uint8_t Bluetooth_SendHCICommand(BT_HCICommand_Header_t* HCICommandHeader, void* Parameters, uint16_t ParameterLength)
{
/* Need to reserve the amount of bytes given in the header for the complete payload */
- uint8_t CommandBuffer[sizeof(HCICommandHeader) + HCICommandHeader.ParameterLength];
+ uint8_t CommandBuffer[sizeof(BT_HCICommand_Header_t) + HCICommandHeader->ParameterLength];
USB_ControlRequest = (USB_Request_Header_t)
{
@@ -251,14 +332,14 @@ static uint8_t Bluetooth_SendHCICommand(void* Parameters, uint16_t ParameterLeng };
/* Copy over the HCI command header to the allocated buffer */
- memcpy(CommandBuffer, &HCICommandHeader, sizeof(HCICommandHeader));
+ memcpy(CommandBuffer, HCICommandHeader, sizeof(BT_HCICommand_Header_t));
- /* Zero out the parameter section of the response to ensure that any padding bytes do not expose private RAM contents */
- memset(&CommandBuffer[sizeof(HCICommandHeader)], 0x00, HCICommandHeader.ParameterLength);
+ /* Zero out the parameter section of the response so that all padding bytes are known to be zero */
+ memset(&CommandBuffer[sizeof(BT_HCICommand_Header_t)], 0x00, HCICommandHeader->ParameterLength);
/* Copy over the command parameters (if any) to the command buffer - note, the number of actual source parameter bytes
may differ to those in the header; any difference in length is filled with 0x00 padding bytes */
- memcpy(&CommandBuffer[sizeof(HCICommandHeader)], Parameters, ParameterLength);
+ memcpy(&CommandBuffer[sizeof(BT_HCICommand_Header_t)], Parameters, ParameterLength);
Pipe_SelectPipe(PIPE_CONTROLPIPE);
return USB_Host_SendControlRequest(CommandBuffer);
diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothHCICommands.h b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothHCICommands.h index 9c1adf0f4..6a241eaa3 100644 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothHCICommands.h +++ b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothHCICommands.h @@ -42,6 +42,9 @@ #include "BluetoothClassCodes.h"
/* Macros: */
+ #define BT_HCI_DEBUG(l, s, ...) do { if (HCI_DEBUG_LEVEL >= l) printf_P(PSTR("(HCI) " s "\r\n"), __VA_ARGS__); } while (0)
+ #define HCI_DEBUG_LEVEL 1
+
#define OGF_LINK_CONTROL 0x01
#define OGF_CTRLR_BASEBAND 0x03
#define OGF_CTRLR_INFORMATIONAL 0x04
@@ -79,6 +82,7 @@ #define EVENT_DISCONNECTION_COMPLETE 0x05
#define EVENT_REMOTE_NAME_REQUEST_COMPLETE 0x07
#define EVENT_PIN_CODE_REQUEST 0x16
+ #define EVENT_LINK_KEY_REQUEST 0x17
#define ERROR_LIMITED_RESOURCES 0x0D
#define ERROR_UNACCEPTABLE_BDADDR 0x0F
@@ -142,18 +146,16 @@ {
uint8_t RemoteAddress[6];
} BT_HCIEvent_PinCodeReq_t;
-
+
typedef struct
{
uint8_t RemoteAddress[6];
- uint8_t SlaveRole;
- } BT_HCICommand_AcceptConnectionReq_t;
-
+ } BT_HCIEvent_LinkKeyReq_t;
+
typedef struct
{
uint8_t RemoteAddress[6];
- uint8_t Reason;
- } BT_HCICommand_RejectConnectionReq_t;
+ } BT_HCICommand_LinkKeyNAKResp_t;
typedef struct
{
@@ -162,6 +164,18 @@ char PINCode[16];
} BT_HCICommand_PinCodeResp_t;
+ typedef struct
+ {
+ uint8_t RemoteAddress[6];
+ uint8_t SlaveRole;
+ } BT_HCICommand_AcceptConnectionReq_t;
+
+ typedef struct
+ {
+ uint8_t RemoteAddress[6];
+ uint8_t Reason;
+ } BT_HCICommand_RejectConnectionReq_t;
+
/* Enums: */
enum BT_ScanEnable_Modes_t
{
@@ -182,6 +196,7 @@ Bluetooth_Conn_AcceptConnection = 6,
Bluetooth_Conn_RejectConnection = 7,
Bluetooth_Conn_SendPINCode = 8,
+ Bluetooth_Conn_SendLinkKeyNAK = 9,
};
/* External Variables: */
@@ -191,7 +206,8 @@ void Bluetooth_HCITask(void);
#if defined(INCLUDE_FROM_BLUETOOTHHCICOMMANDS_C)
- static uint8_t Bluetooth_SendHCICommand(void* Parameters, uint16_t ParameterLength);
+ static uint8_t Bluetooth_SendHCICommand(BT_HCICommand_Header_t* HCICommandHeader, void* Parameters,
+ uint16_t ParameterLength);
#endif
#endif
diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothStack.h b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothStack.h index 9a90cffc6..5ab7a6f9f 100644 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothStack.h +++ b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothStack.h @@ -42,10 +42,16 @@ #define BLUETOOTH_EVENTS_PIPE 3
#define BLUETOOTH_MAX_OPEN_CHANNELS 2
- #define BLUETOOTH_CHANNELNUMBER_BASEOFFSET 0x0040
#define CHANNEL_PSM_SERVICEDISCOVERY 0x0001
+ #define CHANNEL_PSM_UDP 0x0002
#define CHANNEL_PSM_RFCOMM 0x0003
+ #define CHANNEL_PSM_TCP 0x0004
+ #define CHANNEL_PSM_IP 0x0009
+ #define CHANNEL_PSM_FTP 0x000A
+ #define CHANNEL_PSM_HTTP 0x000C
+ #define CHANNEL_PSM_UPNP 0x0010
+ #define CHANNEL_PSM_HIDP 0x0011
#define MAXIMUM_CHANNEL_MTU 255
|