diff options
Diffstat (limited to 'Demos/Host/LowLevel/KeyboardHostWithParser')
8 files changed, 115 insertions, 107 deletions
diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.c b/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.c index 74817a2f1..fe35d95b7 100644 --- a/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -50,7 +50,7 @@ uint8_t ProcessConfigurationDescriptor(void) uint8_t ConfigDescriptorData[512]; void* CurrConfigLocation = ConfigDescriptorData; uint16_t CurrConfigBytesRem; - + USB_Descriptor_Interface_t* HIDInterface = NULL; USB_Descriptor_HID_t* HIDDescriptor = NULL; USB_Descriptor_Endpoint_t* DataINEndpoint = NULL; @@ -82,7 +82,7 @@ uint8_t ProcessConfigurationDescriptor(void) /* Descriptor not found, error out */ return NoCompatibleInterfaceFound; } - + /* Save the interface in case we need to refer back to it later */ HIDInterface = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Interface_t); @@ -93,14 +93,14 @@ uint8_t ProcessConfigurationDescriptor(void) /* Descriptor not found, error out */ return NoCompatibleInterfaceFound; } - + /* Save the HID descriptor for later use */ - HIDDescriptor = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_HID_t); - + HIDDescriptor = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_HID_t); + /* Skip the remainder of the loop as we have not found an endpoint yet */ continue; } - + /* Retrieve the endpoint address from the endpoint descriptor */ USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t); @@ -108,7 +108,7 @@ uint8_t ProcessConfigurationDescriptor(void) if (EndpointData->EndpointAddress & ENDPOINT_DESCRIPTOR_DIR_IN) DataINEndpoint = EndpointData; } - + /* Configure the HID data IN pipe */ Pipe_ConfigurePipe(KEYBOARD_DATA_IN_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); @@ -140,7 +140,7 @@ uint8_t DComp_NextKeyboardInterface(void* CurrentDescriptor) return DESCRIPTOR_SEARCH_Found; } } - + return DESCRIPTOR_SEARCH_NotFound; } @@ -183,5 +183,6 @@ uint8_t DComp_NextHID(void* CurrentDescriptor) else if (DESCRIPTOR_TYPE(CurrentDescriptor) == DTYPE_Interface) return DESCRIPTOR_SEARCH_Fail; else - return DESCRIPTOR_SEARCH_NotFound; + return DESCRIPTOR_SEARCH_NotFound; } + diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.h b/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.h index a7bc1d34c..d23c89dd0 100644 --- a/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -38,9 +38,9 @@ /* Includes: */ #include <LUFA/Drivers/USB/USB.h> - + #include "HIDReport.h" - + /* Macros: */ /** Interface Class value for the Human Interface Device class. */ #define KEYBOARD_CLASS 0x03 @@ -53,7 +53,7 @@ /** Descriptor header type constant for a HID report descriptor. */ #define DTYPE_Report 0x22 - + /** Pipe number for the keyboard report data pipe. */ #define KEYBOARD_DATA_IN_PIPE 1 @@ -74,5 +74,6 @@ uint8_t DComp_NextKeyboardInterface(void* CurrentDescriptor); uint8_t DComp_NextKeyboardInterfaceDataEndpoint(void* CurrentDescriptor); uint8_t DComp_NextHID(void* CurrentDescriptor); - + #endif + diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/HIDReport.c b/Demos/Host/LowLevel/KeyboardHostWithParser/HIDReport.c index 6b4df377d..d2dde64bd 100644 --- a/Demos/Host/LowLevel/KeyboardHostWithParser/HIDReport.c +++ b/Demos/Host/LowLevel/KeyboardHostWithParser/HIDReport.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -46,7 +46,7 @@ uint8_t GetHIDReportData(void) { /* Create a buffer big enough to hold the entire returned HID report */ uint8_t HIDReportData[HIDReportSize]; - + USB_ControlRequest = (USB_Request_Header_t) { .bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_INTERFACE), @@ -66,7 +66,7 @@ uint8_t GetHIDReportData(void) /* Send the HID report to the parser for processing */ if (USB_ProcessHIDReport(HIDReportData, HIDReportSize, &HIDReportInfo) != HID_PARSE_Successful) return ParseError; - + return ParseSuccessful; } @@ -87,3 +87,4 @@ bool CALLBACK_HIDParser_FilterHIDReportItem(HID_ReportItem_t* const CurrentItem) */ return (CurrentItem->Attributes.Usage.Page == USAGE_PAGE_KEYBOARD); } + diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/HIDReport.h b/Demos/Host/LowLevel/KeyboardHostWithParser/HIDReport.h index 09cace965..e18ad3aae 100644 --- a/Demos/Host/LowLevel/KeyboardHostWithParser/HIDReport.h +++ b/Demos/Host/LowLevel/KeyboardHostWithParser/HIDReport.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -39,7 +39,7 @@ /* Includes: */ #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/USB/Class/Host/HIDParser.h> - + #include "KeyboardHostWithParser.h" /* Macros: */ @@ -54,16 +54,16 @@ ParseError = 1, /**< Failed to fully process the HID report descriptor */ ParseControlError = 2, /**< Control error occurred while trying to read the device HID descriptor */ }; - + /* Type Defines: */ /** Type define for a HID descriptor. */ typedef struct { USB_Descriptor_Header_t Header; /**< Regular descriptor header containing the descriptor's type and length */ - + uint16_t HIDSpec; /**< Implemented HID class specification, in BCD encoded format */ uint8_t CountryCode; /**< Country code value for localized hardware */ - + uint8_t TotalHIDDescriptors; /**< Total number of HID report descriptors in the current interface */ uint8_t HIDReportType; /**< HID report type of the first HID report descriptor */ @@ -78,5 +78,6 @@ uint8_t GetHIDReportData(void); bool CALLBACK_HIDParser_FilterHIDReportItem(HID_ReportItem_t* const CurrentItem); - + #endif + diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.c b/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.c index 15bc94061..bdf4a2830 100644 --- a/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.c +++ b/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * Main source file for the KeyboardHostWithParser demo. This file contains the main tasks of * the demo and is responsible for the initial application hardware configuration. */ - + #include "KeyboardHostWithParser.h" /** Main program entry point. This routine configures the hardware required by the application, then @@ -119,7 +119,7 @@ void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, " -- Error Code %d\r\n" " -- Sub Error Code %d\r\n" " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState); - + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); } @@ -134,7 +134,7 @@ void Keyboard_HID_Task(void) { case HOST_STATE_Addressed: puts_P(PSTR("Getting Config Data.\r\n")); - + /* Get and process the configuration descriptor data */ if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead) { @@ -144,7 +144,7 @@ void Keyboard_HID_Task(void) puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n")); printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); - + /* Indicate error via status LEDs */ LEDs_SetAllLEDs(LEDMASK_USB_ERROR); @@ -167,9 +167,9 @@ void Keyboard_HID_Task(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + printf_P(PSTR("Processing HID Report (Size %d Bytes).\r\n"), HIDReportSize); - + /* Get and process the device's first HID report descriptor */ if ((ErrorCode = GetHIDReportData()) != ParseSuccessful) { @@ -179,13 +179,13 @@ void Keyboard_HID_Task(void) puts_P(PSTR("Not a valid Keyboard." ESC_FG_WHITE)); else printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); - + /* Indicate error via status LEDs */ LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - + /* Wait until USB device disconnected */ USB_HostState = HOST_STATE_WaitForDeviceRemoval; - break; + break; } printf("Total Reports: %d\r\n", HIDReportInfo.TotalDeviceReports); @@ -193,7 +193,7 @@ void Keyboard_HID_Task(void) for (uint8_t i = 0; i < HIDReportInfo.TotalDeviceReports; i++) { HID_ReportSizeInfo_t* CurrReportIDInfo = &HIDReportInfo.ReportIDSizes[i]; - + uint8_t ReportSizeInBits = CurrReportIDInfo->ReportSizeBits[HID_REPORT_ITEM_In]; uint8_t ReportSizeOutBits = CurrReportIDInfo->ReportSizeBits[HID_REPORT_ITEM_Out]; uint8_t ReportSizeFeatureBits = CurrReportIDInfo->ReportSizeBits[HID_REPORT_ITEM_Feature]; @@ -212,7 +212,7 @@ void Keyboard_HID_Task(void) break; case HOST_STATE_Configured: /* Select and unfreeze keyboard data pipe */ - Pipe_SelectPipe(KEYBOARD_DATA_IN_PIPE); + Pipe_SelectPipe(KEYBOARD_DATA_IN_PIPE); Pipe_Unfreeze(); /* Check to see if a packet has been received */ @@ -226,11 +226,11 @@ void Keyboard_HID_Task(void) /* Load in the keyboard report */ Pipe_Read_Stream_LE(KeyboardReport, Pipe_BytesInPipe()); - + /* Process the read in keyboard report from the device */ ProcessKeyboardReport(KeyboardReport); } - + /* Clear the IN endpoint, ready for next data packet */ Pipe_ClearIN(); } @@ -262,11 +262,11 @@ void ProcessKeyboardReport(uint8_t* KeyboardReport) { /* Retrieve the keyboard scan-code from the report data retrieved from the device */ bool FoundData = USB_GetHIDReportItemInfo(KeyboardReport, ReportItem); - + /* For multi-report devices - if the requested data was not in the issued report, continue */ if (!(FoundData)) continue; - + /* Key code is an unsigned char in length, cast to the appropriate type */ uint8_t KeyCode = (uint8_t)ReportItem->Value; @@ -284,17 +284,18 @@ void ProcessKeyboardReport(uint8_t* KeyboardReport) else if ((KeyCode >= 0x1E) && (KeyCode <= 0x27)) PressedKey = (KeyCode - 0x1E) + '0'; else if (KeyCode == 0x2C) - PressedKey = ' '; + PressedKey = ' '; else if (KeyCode == 0x28) PressedKey = '\n'; - + /* Print the pressed key character out through the serial port if valid */ if (PressedKey) putchar(PressedKey); } - + /* Once a scan-code is found, stop scanning through the report items */ break; } } } + diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.h b/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.h index 4aaea382f..3a5f138a1 100644 --- a/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.h +++ b/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -44,7 +44,7 @@ #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/Peripheral/SerialStream.h> #include <LUFA/Drivers/Board/LEDs.h> - + #include "ConfigDescriptor.h" #include "HIDReport.h" @@ -60,7 +60,7 @@ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - + /* Function Prototypes: */ void Keyboard_HID_Task(void); void SetupHardware(void); @@ -73,5 +73,6 @@ void EVENT_USB_Host_DeviceEnumerationComplete(void); void ProcessKeyboardReport(uint8_t* KeyboardReport); - + #endif + diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.txt b/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.txt index 5e122a38f..50f6c861d 100644 --- a/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.txt +++ b/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Keyboard Host With HID Descriptor Parser Demo * * \section SSec_Compat Demo Compatibility: @@ -25,7 +25,7 @@ * <td><b>USB Class:</b></td> * <td>Human Interface Device (HID)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>N/A</td> * </tr> @@ -41,20 +41,20 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Keyboard host demonstration application. This gives a simple reference * application for implementing a USB Keyboard host, for USB keyboards using * the standard Keyboard HID profile. It uses a HID parser for the HID reports, * allowing for correct operation across all USB keyboards. This demo supports * keyboards with a single HID report. - * + * * Pressed alpha-numeric, enter or space key is transmitted through the serial * USART at serial settings 9600, 8, N, 1. On connection to a USB keyboard, the * report items will be processed and printed as a formatted list through the * USART before the keyboard is fully enumerated. - * - * Currently only single interface keyboards are supported. + * + * Currently only single interface keyboards are supported. * * \section SSec_Options Project Options * @@ -68,3 +68,4 @@ * </tr> * </table> */ + diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/makefile b/Demos/Host/LowLevel/KeyboardHostWithParser/makefile index db8f91911..04bb9ab79 100644 --- a/Demos/Host/LowLevel/KeyboardHostWithParser/makefile +++ b/Demos/Host/LowLevel/KeyboardHostWithParser/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -135,7 +135,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -148,7 +148,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -262,7 +262,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -275,7 +275,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -287,7 +287,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -299,7 +299,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -322,7 +322,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -356,7 +356,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -390,7 +390,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -419,7 +419,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -438,10 +438,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -506,11 +506,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -537,9 +537,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -637,14 +637,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -666,7 +666,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -710,3 +710,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + |