aboutsummaryrefslogtreecommitdiffstats
path: root/Demos/Host/LowLevel/VirtualSerialHost/makefile
diff options
context:
space:
mode:
Diffstat (limited to 'Demos/Host/LowLevel/VirtualSerialHost/makefile')
-rw-r--r--Demos/Host/LowLevel/VirtualSerialHost/makefile49
1 files changed, 25 insertions, 24 deletions
diff --git a/Demos/Host/LowLevel/VirtualSerialHost/makefile b/Demos/Host/LowLevel/VirtualSerialHost/makefile
index 43677949d..09a245808 100644
--- a/Demos/Host/LowLevel/VirtualSerialHost/makefile
+++ b/Demos/Host/LowLevel/VirtualSerialHost/makefile
@@ -47,7 +47,7 @@
# make doxygen = Generate DoxyGen documentation for the project (must have
# DoxyGen installed)
#
-# make debug = Start either simulavr or avarice as specified for debugging,
+# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
@@ -64,14 +64,14 @@ MCU = at90usb1287
# Target board (see library "Board Types" documentation, NONE for projects not requiring
-# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
+# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
# "Board" inside the application directory.
BOARD = USBKEY
# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
@@ -84,7 +84,7 @@ F_CPU = 8000000
# Input clock frequency.
-# This will define a symbol, F_CLOCK, in all source code files equal to the
+# This will define a symbol, F_CLOCK, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
@@ -134,7 +134,7 @@ SRC = $(TARGET).c \
# List C++ source files here. (C dependencies are automatically generated.)
-CPPSRC =
+CPPSRC =
# List Assembler source files here.
@@ -147,7 +147,7 @@ CPPSRC =
ASRC =
-# Optimization level, can be [0, 1, 2, 3, s].
+# Optimization level, can be [0, 1, 2, 3, s].
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
OPT = s
@@ -261,7 +261,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
# for use in COFF files, additional information about filenames
# and function names needs to be present in the assembler source
# files -- see avr-libc docs [FIXME: not yet described there]
-# -listing-cont-lines: Sets the maximum number of continuation lines of hex
+# -listing-cont-lines: Sets the maximum number of continuation lines of hex
# dump that will be displayed for a given single line of source input.
ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
@@ -274,7 +274,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
# If this is left blank, then it will use the Standard printf version.
-PRINTF_LIB =
+PRINTF_LIB =
#PRINTF_LIB = $(PRINTF_LIB_MIN)
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
@@ -286,7 +286,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
# If this is left blank, then it will use the Standard scanf version.
-SCANF_LIB =
+SCANF_LIB =
#SCANF_LIB = $(SCANF_LIB_MIN)
#SCANF_LIB = $(SCANF_LIB_FLOAT)
@@ -298,7 +298,7 @@ MATH_LIB = -lm
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRALIBDIRS =
+EXTRALIBDIRS =
@@ -321,7 +321,7 @@ EXTMEMOPTS =
# -Map: create map file
# --cref: add cross reference to map file
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
-LDFLAGS += -Wl,--relax
+LDFLAGS += -Wl,--relax
LDFLAGS += -Wl,--gc-sections
LDFLAGS += $(EXTMEMOPTS)
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
@@ -355,7 +355,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
#AVRDUDE_NO_VERIFY = -V
# Increase verbosity level. Please use this when submitting bug
-# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
+# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
# to submit bug reports.
#AVRDUDE_VERBOSE = -v -v
@@ -389,7 +389,7 @@ JTAG_DEV = /dev/com1
DEBUG_PORT = 4242
# Debugging host used to communicate between GDB / avarice / simulavr, normally
-# just set to localhost unless doing some sort of crazy debugging when
+# just set to localhost unless doing some sort of crazy debugging when
# avarice is running on a different computer.
DEBUG_HOST = localhost
@@ -418,7 +418,7 @@ WINSHELL = cmd
MSG_ERRORS_NONE = Errors: none
MSG_BEGIN = -------- begin --------
MSG_END = -------- end --------
-MSG_SIZE_BEFORE = Size before:
+MSG_SIZE_BEFORE = Size before:
MSG_SIZE_AFTER = Size after:
MSG_COFF = Converting to AVR COFF:
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
@@ -437,10 +437,10 @@ MSG_CREATING_LIBRARY = Creating library:
# Define all object files.
-OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
+OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
# Define all listing files.
-LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
+LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
# Compiler flags to generate dependency files.
@@ -505,11 +505,11 @@ sizeafter:
# Display compiler version information.
-gccversion :
+gccversion :
@$(CC) --version
-# Program the device.
+# Program the device.
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
@@ -536,9 +536,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep
# Generate avr-gdb config/init file which does the following:
-# define the reset signal, load the target file, connect to target, and set
+# define the reset signal, load the target file, connect to target, and set
# a breakpoint at main().
-gdb-config:
+gdb-config:
@$(REMOVE) $(GDBINIT_FILE)
@echo define reset >> $(GDBINIT_FILE)
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
@@ -636,14 +636,14 @@ extcoff: $(TARGET).elf
$(OBJDIR)/%.o : %.c
@echo
@echo $(MSG_COMPILING) $<
- $(CC) -c $(ALL_CFLAGS) $< -o $@
+ $(CC) -c $(ALL_CFLAGS) $< -o $@
# Compile: create object files from C++ source files.
$(OBJDIR)/%.o : %.cpp
@echo
@echo $(MSG_COMPILING_CPP) $<
- $(CC) -c $(ALL_CPPFLAGS) $< -o $@
+ $(CC) -c $(ALL_CPPFLAGS) $< -o $@
# Compile: create assembler files from C source files.
@@ -665,7 +665,7 @@ $(OBJDIR)/%.o : %.S
# Create preprocessed source for use in sending a bug report.
%.i : %.c
- $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
+ $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
# Target: clean project.
@@ -709,3 +709,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
build elf hex eep lss sym coff extcoff doxygen clean \
clean_list clean_doxygen program dfu flip flip-ee dfu-ee \
debug gdb-config
+