1 files changed, 43 insertions, 19 deletions
diff --git a/Demos/MassStorage/MassStorage.txt b/Demos/MassStorage/MassStorage.txt
index 428faa8e0..4e8adadbc 100644
--- a/Demos/MassStorage/MassStorage.txt
+++ b/Demos/MassStorage/MassStorage.txt
@@ -6,25 +6,9 @@
  
 /** \mainpage Mass Storage Device Demo
  *
- *  Dual LUN Mass Storage demonstration application. This gives a simple
- *  reference application for implementing a multiple LUN USB Mass Storage
- *  device using the basic USB UFI drivers in all modern OSes (i.e. no
- *  special drivers required).
- *  
- *  On startup the system will automatically enumerate and function as an
- *  external mass storage device with two LUNs (seperate disks) which may
- *  be formatted and used in the same manner as commercial USB Mass Storage
- *  devices.
- *  	
- *  You will need to format the mass storage drives upon first run of this
- *  demonstration - as the device acts only as a data block transport between
- *  the host and the storage media, it does not matter what file system is used,
- *  as the data interpretation is performed by the host and not the USB device.
- *  
- *  This demo is not restricted to only two LUNs; by changing the TOTAL_LUNS
- *  value in MassStorageDualLUN.h, any number of LUNs can be used (from 1 to
- *  255), with each LUN being allocated an equal portion of the available
- *  Dataflash memory.
+ *  \section SSec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
  *
  *  <table>
  *   <tr>
@@ -51,4 +35,44 @@
  *    <td>Full Speed Mode</td>
  *   </tr>
  *  </table>
+ *
+ *  \section SSec_Description Project Description: 
+ *
+ *  Dual LUN Mass Storage demonstration application. This gives a simple
+ *  reference application for implementing a multiple LUN USB Mass Storage
+ *  device using the basic USB UFI drivers in all modern OSes (i.e. no
+ *  special drivers required).
+ *  
+ *  On startup the system will automatically enumerate and function as an
+ *  external mass storage device with two LUNs (seperate disks) which may
+ *  be formatted and used in the same manner as commercial USB Mass Storage
+ *  devices.
+ *  	
+ *  You will need to format the mass storage drives upon first run of this
+ *  demonstration - as the device acts only as a data block transport between
+ *  the host and the storage media, it does not matter what file system is used,
+ *  as the data interpretation is performed by the host and not the USB device.
+ *  
+ *  This demo is not restricted to only two LUNs; by changing the TOTAL_LUNS
+ *  value in MassStorageDualLUN.h, any number of LUNs can be used (from 1 to
+ *  255), with each LUN being allocated an equal portion of the available
+ *  Dataflash memory.
+ *
+ *  \section SSec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>Define Name:</b></td>
+ *    <td><b>Location:</b></td>
+ *    <td><b>Description:</b></td>
+ *   </tr>
+ *   <tr>
+ *    <td>TOTAL_LUNS</td>
+ *    <td>MassStorage.h</td>
+ *    <td>Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive
+ *        - this can be set to any positive non-zero amount.</td>
+ *   </tr>
+ *  </table>
  */
 \ No newline at end of file