aboutsummaryrefslogtreecommitdiffstats
path: root/Demos/OTG/TestApp/TestApp.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Demos/OTG/TestApp/TestApp.txt')
-rw-r--r--Demos/OTG/TestApp/TestApp.txt69
1 files changed, 69 insertions, 0 deletions
diff --git a/Demos/OTG/TestApp/TestApp.txt b/Demos/OTG/TestApp/TestApp.txt
new file mode 100644
index 000000000..aef55b761
--- /dev/null
+++ b/Demos/OTG/TestApp/TestApp.txt
@@ -0,0 +1,69 @@
+/** \file
+ *
+ * This file contains special DoxyGen information for the generation of the main page and other special
+ * documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Test Application for the LUFA library
+ *
+ * \section SSec_Info USB Information:
+ *
+ * The following table gives a rundown of the USB utilization of this demo.
+ *
+ * <table>
+ * <tr>
+ * <td><b>USB Mode:</b></td>
+ * <td>Host/Device (Dual Role)</td>
+ * </tr>
+ * <tr>
+ * <td><b>USB Class:</b></td>
+ * <td>N/A</td>
+ * </tr>
+ * <tr>
+ * <td><b>USB Subclass:</b></td>
+ * <td>N/A</td>
+ * </tr>
+ * <tr>
+ * <td><b>Relevant Standards:</b></td>
+ * <td>N/A</td>
+ * </tr>
+ * <tr>
+ * <td><b>Usable Speeds:</b></td>
+ * <td>Low Speed Mode, Full Speed Mode</td>
+ * </tr>
+ * </table>
+ *
+ * \section SSec_Description Project Description:
+ *
+ * Test application. Demonstrates several aspects of the LUFA
+ * Library. On startup the current temperature will be printed
+ * through the USART every 10 seconds, and the current joystick
+ * position will be indicated via the LEDs on the selected board.
+ * Pressing the HWB will initiate the USB subsystem, enumerating
+ * the device (which has <b>no actual functionality beyond
+ * enumeration as a device or as a host in this demo</b>, and serves
+ * only to demonstrate the USB portion of the library). It will
+ * also suspend the joystick and temperature monitoring tasks.
+ *
+ * Pressing the HWB a second time will turn off the USB system
+ * and resume the temperature printing task (but not the joystick
+ * monitoring task).
+ *
+ * When activated, the USB events will be printed through the
+ * serial USART.
+ *
+ * When the USB subsystem is activated, the board LEDs will show
+ * the current USB status.
+ *
+ * \section SSec_Options Project Options
+ *
+ * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ * <table>
+ * <tr>
+ * <td>
+ * None
+ * </td>
+ * </tr>
+ * </table>
+ */ \ No newline at end of file