aboutsummaryrefslogtreecommitdiffstats
path: root/Demos
diff options
context:
space:
mode:
Diffstat (limited to 'Demos')
-rw-r--r--Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c69
-rw-r--r--Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.h13
-rw-r--r--Demos/Device/LowLevel/MassStorage/MassStorage.c60
3 files changed, 89 insertions, 53 deletions
diff --git a/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c b/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c
index ab98411b7..711ca3fa8 100644
--- a/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c
+++ b/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c
@@ -329,36 +329,36 @@ void TMC_Task(void)
/* Device must be connected and configured for the task to run */
if (USB_DeviceState != DEVICE_STATE_Configured)
return;
-
- Endpoint_SelectEndpoint(TMC_OUT_EPNUM);
- if (Endpoint_IsOUTReceived())
+ TMC_MessageHeader_t MessageHeader;
+
+ /* Check if a TMC packet has been received */
+ if (ReadTMCHeader(&MessageHeader))
{
- TMC_MessageHeader_t MessageHeader;
-
- Endpoint_Read_Stream_LE(&MessageHeader, sizeof(MessageHeader), StreamCallback_AbortOUTOnRequest);
- CurrentTransferTag = MessageHeader.Tag;
+ /* Indicate busy */
+ LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
switch (MessageHeader.MessageID)
{
case TMC_MESSAGEID_DEV_DEP_MSG_OUT:
-
+ Endpoint_Discard_Stream(MessageHeader.TransferSize, StreamCallback_AbortOUTOnRequest);
+ Endpoint_ClearOUT();
break;
case TMC_MESSAGEID_DEV_DEP_MSG_IN:
+ Endpoint_ClearOUT();
- break;
- case TMC_MESSAGEID_DEV_VENDOR_OUT:
-
- break;
- case TMC_MESSAGEID_DEV_VENDOR_IN:
+ MessageHeader.TransferSize = 3;
+ WriteTMCHeader(&MessageHeader);
+ Endpoint_Write_Stream_LE("TMC", 3, StreamCallback_AbortINOnRequest);
+ Endpoint_ClearIN();
break;
default:
Endpoint_StallTransaction();
break;
}
-
- Endpoint_ClearOUT();
+
+ LEDs_SetAllLEDs(LEDMASK_USB_READY);
}
/* All pending data has been processed - reset the data abort flags */
@@ -366,6 +366,45 @@ void TMC_Task(void)
IsTMCBulkOUTReset = false;
}
+bool ReadTMCHeader(TMC_MessageHeader_t* const MessageHeader)
+{
+ /* Select the Data Out endpoint */
+ Endpoint_SelectEndpoint(TMC_OUT_EPNUM);
+
+ /* Abort if no command has been sent from the host */
+ if (!(Endpoint_IsOUTReceived()))
+ return false;
+
+ /* Read in the header of the command from the host */
+ Endpoint_Read_Stream_LE(MessageHeader, sizeof(TMC_MessageHeader_t), StreamCallback_AbortOUTOnRequest);
+
+ /* Store the new command tag value for later use */
+ CurrentTransferTag = MessageHeader->Tag;
+
+ /* Indicate if the command has been aborted or not */
+ return !IsTMCBulkOUTReset;
+}
+
+bool WriteTMCHeader(TMC_MessageHeader_t* const MessageHeader)
+{
+ /* Compute the next transfer tag value, must be between 1 and 254 */
+ if (++CurrentTransferTag == 0xFF)
+ CurrentTransferTag = 1;
+
+ /* Set the message tag of the command header */
+ MessageHeader->Tag = CurrentTransferTag;
+ MessageHeader->InverseTag = ~CurrentTransferTag;
+
+ /* Select the Data In endpoint */
+ Endpoint_SelectEndpoint(TMC_IN_EPNUM);
+
+ /* Send the command header to the host */
+ Endpoint_Write_Stream_LE(MessageHeader, sizeof(TMC_MessageHeader_t), StreamCallback_AbortINOnRequest);
+
+ /* Indicate if the command has been aborted or not */
+ return !IsTMCBulkINReset;
+}
+
/** Stream callback function for the Endpoint stream write functions. This callback will abort the current stream transfer
* if a TMC Abort Bulk IN request has been issued to the control endpoint.
*/
diff --git a/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.h b/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.h
index 191eb40a6..d0db01ef9 100644
--- a/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.h
+++ b/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.h
@@ -45,17 +45,20 @@
/* Macros: */
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
- #define LEDMASK_USB_NOTREADY LEDS_LED1
+ #define LEDMASK_USB_NOTREADY LEDS_LED1
/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
- #define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3)
+ #define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3)
/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
- #define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4)
+ #define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4)
/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
- #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
+ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
+ /** LED mask for the library LED driver, to indicate that the USB interface is busy. */
+ #define LEDMASK_USB_BUSY LEDS_LED2
+
#define Req_InitiateAbortBulkOut 0x01
#define Req_CheckAbortBulkOutStatus 0x02
#define Req_InitiateAbortBulkIn 0x03
@@ -139,6 +142,8 @@
/* Function Prototypes: */
void SetupHardware(void);
void TMC_Task(void);
+ bool ReadTMCHeader(TMC_MessageHeader_t* const MessageHeader);
+ bool WriteTMCHeader(TMC_MessageHeader_t* const MessageHeader);
void EVENT_USB_Device_Connect(void);
void EVENT_USB_Device_Disconnect(void);
diff --git a/Demos/Device/LowLevel/MassStorage/MassStorage.c b/Demos/Device/LowLevel/MassStorage/MassStorage.c
index 9f13ff927..93b7c6102 100644
--- a/Demos/Device/LowLevel/MassStorage/MassStorage.c
+++ b/Demos/Device/LowLevel/MassStorage/MassStorage.c
@@ -173,47 +173,35 @@ void MassStorage_Task(void)
/* Device must be connected and configured for the task to run */
if (USB_DeviceState != DEVICE_STATE_Configured)
return;
-
- /* Select the Data Out Endpoint */
- Endpoint_SelectEndpoint(MASS_STORAGE_OUT_EPNUM);
-
- /* Check to see if a command from the host has been issued */
- if (Endpoint_IsReadWriteAllowed())
+
+ /* Process sent command block from the host if one has been sent */
+ if (ReadInCommandBlock())
{
/* Indicate busy */
LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
- /* Process sent command block from the host */
- if (ReadInCommandBlock())
- {
- /* Check direction of command, select Data IN endpoint if data is from the device */
- if (CommandBlock.Flags & COMMAND_DIRECTION_DATA_IN)
- Endpoint_SelectEndpoint(MASS_STORAGE_IN_EPNUM);
+ /* Check direction of command, select Data IN endpoint if data is from the device */
+ if (CommandBlock.Flags & COMMAND_DIRECTION_DATA_IN)
+ Endpoint_SelectEndpoint(MASS_STORAGE_IN_EPNUM);
- /* Decode the received SCSI command, set returned status code */
- CommandStatus.Status = SCSI_DecodeSCSICommand() ? Command_Pass : Command_Fail;
+ /* Decode the received SCSI command, set returned status code */
+ CommandStatus.Status = SCSI_DecodeSCSICommand() ? Command_Pass : Command_Fail;
- /* Load in the CBW tag into the CSW to link them together */
- CommandStatus.Tag = CommandBlock.Tag;
+ /* Load in the CBW tag into the CSW to link them together */
+ CommandStatus.Tag = CommandBlock.Tag;
- /* Load in the data residue counter into the CSW */
- CommandStatus.DataTransferResidue = CommandBlock.DataTransferLength;
-
- /* Stall the selected data pipe if command failed (if data is still to be transferred) */
- if ((CommandStatus.Status == Command_Fail) && (CommandStatus.DataTransferResidue))
- Endpoint_StallTransaction();
-
- /* Return command status block to the host */
- ReturnCommandStatus();
-
- /* Indicate ready */
- LEDs_SetAllLEDs(LEDMASK_USB_READY);
- }
- else
- {
- /* Indicate error reading in the command block from the host */
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- }
+ /* Load in the data residue counter into the CSW */
+ CommandStatus.DataTransferResidue = CommandBlock.DataTransferLength;
+
+ /* Stall the selected data pipe if command failed (if data is still to be transferred) */
+ if ((CommandStatus.Status == Command_Fail) && (CommandStatus.DataTransferResidue))
+ Endpoint_StallTransaction();
+
+ /* Return command status block to the host */
+ ReturnCommandStatus();
+
+ /* Indicate ready */
+ LEDs_SetAllLEDs(LEDMASK_USB_READY);
}
/* Check if a Mass Storage Reset occurred */
@@ -244,6 +232,10 @@ static bool ReadInCommandBlock(void)
{
/* Select the Data Out endpoint */
Endpoint_SelectEndpoint(MASS_STORAGE_OUT_EPNUM);
+
+ /* Abort if no command has been sent from the host */
+ if (!(Endpoint_IsOUTReceived()))
+ return false;
/* Read in command block header */
Endpoint_Read_Stream_LE(&CommandBlock, (sizeof(CommandBlock) - sizeof(CommandBlock.SCSICommandData)),