diff options
Diffstat (limited to 'LUFA/Drivers/Board/LEDs.h')
-rw-r--r-- | LUFA/Drivers/Board/LEDs.h | 368 |
1 files changed, 184 insertions, 184 deletions
diff --git a/LUFA/Drivers/Board/LEDs.h b/LUFA/Drivers/Board/LEDs.h index c44612522..5e6a4cd36 100644 --- a/LUFA/Drivers/Board/LEDs.h +++ b/LUFA/Drivers/Board/LEDs.h @@ -1,184 +1,184 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2010.
-
- dean [at] fourwalledcubicle [dot] com
- www.fourwalledcubicle.com
-*/
-
-/*
- Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Master include file for the board LEDs driver.
- *
- * This file is the master dispatch header file for the board-specific LED driver, for boards containing user
- * controllable LEDs.
- *
- * User code should include this file, which will in turn include the correct LED driver header file for the
- * currently selected board.
- *
- * If the BOARD value is set to BOARD_USER, this will include the /Board/LEDs.h file in the user project
- * directory.
- */
-
-/** \ingroup Group_BoardDrivers
- * @defgroup Group_LEDs LEDs Driver - LUFA/Drivers/Board/LEDs.h
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - None
- *
- * \section Module Description
- * Hardware LEDs driver. This provides an easy to use driver for the hardware LEDs present on many boards. It
- * provides an interface to configure, test and change the status of all the board LEDs.
- *
- * If the BOARD value is set to BOARD_USER, this will include the /Board/Dataflash.h file in the user project
- * directory. Otherwise, it will include the appropriate built in board driver header file. If the BOARD value
- * is set to BOARD_NONE, this driver is silently disabled.
- *
- * \note To make code as compatible as possible, it is assumed that all boards carry a minimum of four LEDs. If
- * a board contains less than four LEDs, the remaining LED masks are defined to 0 so as to have no effect.
- * If other behaviour is desired, either alias the remaining LED masks to existing LED masks via the -D
- * switch in the project makefile, or alias them to nothing in the makefile to cause compilation errors when
- * a non-existing LED is referenced in application code. Note that this means that it is possible to make
- * compatible code for a board with no LEDs by making a board LED driver (see \ref Page_WritingBoardDrivers)
- * which contains only stub functions and defines no LEDs.
- *
- * @{
- */
-
-#ifndef __LEDS_H__
-#define __LEDS_H__
-
- /* Macros: */
- #if !defined(__DOXYGEN__)
- #define __INCLUDE_FROM_LEDS_H
- #define INCLUDE_FROM_LEDS_H
- #endif
-
- /* Includes: */
- #include "../../Common/Common.h"
-
- #if (BOARD == BOARD_NONE)
- static inline void LEDs_Init(void) {};
- static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask) {};
- static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask) {};
- static inline void LEDs_SetAllLEDs(const uint8_t LEDMask) {};
- static inline void LEDs_ChangeLEDs(const uint8_t LEDMask, const uint8_t ActiveMask) {};
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) {};
- static inline uint8_t LEDs_GetLEDs(void) { return 0; }
- #elif (BOARD == BOARD_USBKEY)
- #include "USBKEY/LEDs.h"
- #elif (BOARD == BOARD_STK525)
- #include "STK525/LEDs.h"
- #elif (BOARD == BOARD_STK526)
- #include "STK526/LEDs.h"
- #elif (BOARD == BOARD_RZUSBSTICK)
- #include "RZUSBSTICK/LEDs.h"
- #elif (BOARD == BOARD_ATAVRUSBRF01)
- #include "ATAVRUSBRF01/LEDs.h"
- #elif ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
- #include "XPLAIN/LEDs.h"
- #elif (BOARD == BOARD_BUMBLEB)
- #include "BUMBLEB/LEDs.h"
- #elif (BOARD == BOARD_EVK527)
- #include "EVK527/LEDs.h"
- #elif (BOARD == BOARD_TEENSY)
- #include "TEENSY/LEDs.h"
- #elif (BOARD == BOARD_USBTINYMKII)
- #include "USBTINYMKII/LEDs.h"
- #elif (BOARD == BOARD_BENITO)
- #include "BENITO/LEDs.h"
- #elif (BOARD == BOARD_JMDBU2)
- #include "JMDBU2/LEDs.h"
- #elif (BOARD == BOARD_USER)
- #include "Board/LEDs.h"
- #endif
-
- #if !defined(LEDS_LED1)
- #define LEDS_LED1 0
- #endif
-
- #if !defined(LEDS_LED2)
- #define LEDS_LED2 0
- #endif
-
- #if !defined(LEDS_LED3)
- #define LEDS_LED3 0
- #endif
-
- #if !defined(LEDS_LED4)
- #define LEDS_LED4 0
- #endif
-
- /* Pseudo-Functions for Doxygen: */
- #if defined(__DOXYGEN__)
- /** Initializes the board LED driver so that the LEDs can be controlled. This sets the appropriate port
- * I/O pins as outputs, and sets the LEDs to default to off.
- */
- static inline void LEDs_Init(void);
-
- /** Turns on the LEDs specified in the given LED mask.
- *
- * \param[in] LEDMask Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file)
- */
- static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask);
-
- /** Turns off the LEDs specified in the given LED mask.
- *
- * \param[in] LEDMask Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file)
- */
- static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask);
-
- /** Turns off all LEDs not specified in the given LED mask, and turns on all the LEDs in the given LED
- * mask.
- *
- * \param[in] LEDMask Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file)
- */
- static inline void LEDs_SetAllLEDs(const uint8_t LEDMask);
-
- /** Turns off all LEDs in the LED mask that are not set in the active mask, and turns on all the LEDs
- * specified in both the LED and active masks.
- *
- * \param[in] LEDMask Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file)
- * \param[in] ActiveMask Mask of whether the LEDs in the LED mask should be turned on or off
- */
- static inline void LEDs_ChangeLEDs(const uint8_t LEDMask, const uint8_t ActiveMask);
-
- /** Toggles all LEDs in the LED mask, leaving all others in their current states.
- *
- * \param[in] LEDMask Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file)
- */
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask);
-
- /** Returns the status of all the board LEDs; set LED masks in the return value indicate that the
- * corresponding LED is on.
- *
- * \return Mask of the board LEDs which are currently turned on
- */
- static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- #endif
-
-#endif
-
-/** @} */
+/* + LUFA Library + Copyright (C) Dean Camera, 2010. + + dean [at] fourwalledcubicle [dot] com + www.fourwalledcubicle.com +*/ + +/* + Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Master include file for the board LEDs driver. + * + * This file is the master dispatch header file for the board-specific LED driver, for boards containing user + * controllable LEDs. + * + * User code should include this file, which will in turn include the correct LED driver header file for the + * currently selected board. + * + * If the BOARD value is set to BOARD_USER, this will include the /Board/LEDs.h file in the user project + * directory. + */ + +/** \ingroup Group_BoardDrivers + * @defgroup Group_LEDs LEDs Driver - LUFA/Drivers/Board/LEDs.h + * + * \section Sec_Dependencies Module Source Dependencies + * The following files must be built with any user project that uses this module: + * - None + * + * \section Module Description + * Hardware LEDs driver. This provides an easy to use driver for the hardware LEDs present on many boards. It + * provides an interface to configure, test and change the status of all the board LEDs. + * + * If the BOARD value is set to BOARD_USER, this will include the /Board/Dataflash.h file in the user project + * directory. Otherwise, it will include the appropriate built in board driver header file. If the BOARD value + * is set to BOARD_NONE, this driver is silently disabled. + * + * \note To make code as compatible as possible, it is assumed that all boards carry a minimum of four LEDs. If + * a board contains less than four LEDs, the remaining LED masks are defined to 0 so as to have no effect. + * If other behaviour is desired, either alias the remaining LED masks to existing LED masks via the -D + * switch in the project makefile, or alias them to nothing in the makefile to cause compilation errors when + * a non-existing LED is referenced in application code. Note that this means that it is possible to make + * compatible code for a board with no LEDs by making a board LED driver (see \ref Page_WritingBoardDrivers) + * which contains only stub functions and defines no LEDs. + * + * @{ + */ + +#ifndef __LEDS_H__ +#define __LEDS_H__ + + /* Macros: */ + #if !defined(__DOXYGEN__) + #define __INCLUDE_FROM_LEDS_H + #define INCLUDE_FROM_LEDS_H + #endif + + /* Includes: */ + #include "../../Common/Common.h" + + #if (BOARD == BOARD_NONE) + static inline void LEDs_Init(void) {}; + static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask) {}; + static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask) {}; + static inline void LEDs_SetAllLEDs(const uint8_t LEDMask) {}; + static inline void LEDs_ChangeLEDs(const uint8_t LEDMask, const uint8_t ActiveMask) {}; + static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) {}; + static inline uint8_t LEDs_GetLEDs(void) { return 0; } + #elif (BOARD == BOARD_USBKEY) + #include "USBKEY/LEDs.h" + #elif (BOARD == BOARD_STK525) + #include "STK525/LEDs.h" + #elif (BOARD == BOARD_STK526) + #include "STK526/LEDs.h" + #elif (BOARD == BOARD_RZUSBSTICK) + #include "RZUSBSTICK/LEDs.h" + #elif (BOARD == BOARD_ATAVRUSBRF01) + #include "ATAVRUSBRF01/LEDs.h" + #elif ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1)) + #include "XPLAIN/LEDs.h" + #elif (BOARD == BOARD_BUMBLEB) + #include "BUMBLEB/LEDs.h" + #elif (BOARD == BOARD_EVK527) + #include "EVK527/LEDs.h" + #elif (BOARD == BOARD_TEENSY) + #include "TEENSY/LEDs.h" + #elif (BOARD == BOARD_USBTINYMKII) + #include "USBTINYMKII/LEDs.h" + #elif (BOARD == BOARD_BENITO) + #include "BENITO/LEDs.h" + #elif (BOARD == BOARD_JMDBU2) + #include "JMDBU2/LEDs.h" + #elif (BOARD == BOARD_USER) + #include "Board/LEDs.h" + #endif + + #if !defined(LEDS_LED1) + #define LEDS_LED1 0 + #endif + + #if !defined(LEDS_LED2) + #define LEDS_LED2 0 + #endif + + #if !defined(LEDS_LED3) + #define LEDS_LED3 0 + #endif + + #if !defined(LEDS_LED4) + #define LEDS_LED4 0 + #endif + + /* Pseudo-Functions for Doxygen: */ + #if defined(__DOXYGEN__) + /** Initializes the board LED driver so that the LEDs can be controlled. This sets the appropriate port + * I/O pins as outputs, and sets the LEDs to default to off. + */ + static inline void LEDs_Init(void); + + /** Turns on the LEDs specified in the given LED mask. + * + * \param[in] LEDMask Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file) + */ + static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask); + + /** Turns off the LEDs specified in the given LED mask. + * + * \param[in] LEDMask Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file) + */ + static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask); + + /** Turns off all LEDs not specified in the given LED mask, and turns on all the LEDs in the given LED + * mask. + * + * \param[in] LEDMask Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file) + */ + static inline void LEDs_SetAllLEDs(const uint8_t LEDMask); + + /** Turns off all LEDs in the LED mask that are not set in the active mask, and turns on all the LEDs + * specified in both the LED and active masks. + * + * \param[in] LEDMask Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file) + * \param[in] ActiveMask Mask of whether the LEDs in the LED mask should be turned on or off + */ + static inline void LEDs_ChangeLEDs(const uint8_t LEDMask, const uint8_t ActiveMask); + + /** Toggles all LEDs in the LED mask, leaving all others in their current states. + * + * \param[in] LEDMask Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file) + */ + static inline void LEDs_ToggleLEDs(const uint8_t LEDMask); + + /** Returns the status of all the board LEDs; set LED masks in the return value indicate that the + * corresponding LED is on. + * + * \return Mask of the board LEDs which are currently turned on + */ + static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT; + #endif + +#endif + +/** @} */ |