diff options
Diffstat (limited to 'LUFA/Drivers/Peripheral/AVR8/SerialSPI_AVR8.h')
| -rw-r--r-- | LUFA/Drivers/Peripheral/AVR8/SerialSPI_AVR8.h | 16 |
1 files changed, 8 insertions, 8 deletions
diff --git a/LUFA/Drivers/Peripheral/AVR8/SerialSPI_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/SerialSPI_AVR8.h index fe108e500..0126630ac 100644 --- a/LUFA/Drivers/Peripheral/AVR8/SerialSPI_AVR8.h +++ b/LUFA/Drivers/Peripheral/AVR8/SerialSPI_AVR8.h @@ -29,7 +29,7 @@ */ /** \file - * \brief Serial USART Master SPI Mode Peripheral Driver (XMEGA) + * \brief Master SPI Mode Serial USART Peripheral Driver (XMEGA) * * On-chip Master SPI mode USART driver for the XMEGA AVR microcontrollers. * @@ -38,7 +38,7 @@ */ /** \ingroup Group_SerialSPI - * \defgroup Group_SerialSPI_AVR8 Serial USART Peripheral Driver (AVR8) + * \defgroup Group_SerialSPI_AVR8 Master SPI Mode Serial USART Peripheral Driver (AVR8) * * \section Sec_ModDescription Module Description * On-chip serial USART driver for the 8-bit AVR8 microcontrollers. @@ -98,28 +98,28 @@ /* Macros: */ /** \name SPI SCK Polarity Configuration Masks */ //@{ - /** SPI clock polarity mask for \c SPI_Init(). Indicates that the SCK should lead on the rising edge. */ + /** SPI clock polarity mask for \ref SPI_Init(). Indicates that the SCK should lead on the rising edge. */ #define USART_SPI_SCK_LEAD_RISING (0 << UCPOL) - /** SPI clock polarity mask for \c SPI_Init(). Indicates that the SCK should lead on the falling edge. */ + /** SPI clock polarity mask for \ref SPI_Init(). Indicates that the SCK should lead on the falling edge. */ #define USART_SPI_SCK_LEAD_FALLING (1 << UCPOL) //@} /** \name SPI Sample Edge Configuration Masks */ //@{ - /** SPI data sample mode mask for \c SerialSPI_Init(). Indicates that the data should sampled on the leading edge. */ + /** SPI data sample mode mask for \ref SerialSPI_Init(). Indicates that the data should sampled on the leading edge. */ #define USART_SPI_SAMPLE_LEADING (0 << UPCHA) - /** SPI data sample mode mask for \c SerialSPI_Init(). Indicates that the data should be sampled on the trailing edge. */ + /** SPI data sample mode mask for \ref SerialSPI_Init(). Indicates that the data should be sampled on the trailing edge. */ #define USART_SPI_SAMPLE_TRAILING (1 << UPCHA) //@} /** \name SPI Data Ordering Configuration Masks */ //@{ - /** SPI data order mask for \c Serial_SPIInit(). Indicates that data should be shifted out MSB first. */ + /** SPI data order mask for \ref SerialSPI_Init(). Indicates that data should be shifted out MSB first. */ #define USART_SPI_ORDER_MSB_FIRST (0 << UDORD) - /** SPI data order mask for \c Serial_SPIInit(). Indicates that data should be shifted out LSB first. */ + /** SPI data order mask for \ref SerialSPI_Init(). Indicates that data should be shifted out LSB first. */ #define USART_SPI_ORDER_LSB_FIRST (1 << UDORD) //@} |