aboutsummaryrefslogtreecommitdiffstats
path: root/LUFA/Drivers/Peripheral
diff options
context:
space:
mode:
Diffstat (limited to 'LUFA/Drivers/Peripheral')
-rw-r--r--LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h6
-rw-r--r--LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h6
-rw-r--r--LUFA/Drivers/Peripheral/AVR8/SerialSPI_AVR8.h6
-rw-r--r--LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h4
-rw-r--r--LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.h22
-rw-r--r--LUFA/Drivers/Peripheral/XMEGA/SPI_XMEGA.h6
-rw-r--r--LUFA/Drivers/Peripheral/XMEGA/SerialSPI_XMEGA.h6
-rw-r--r--LUFA/Drivers/Peripheral/XMEGA/Serial_XMEGA.h4
8 files changed, 30 insertions, 30 deletions
diff --git a/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h
index ec80dd247..c04d2ba8c 100644
--- a/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h
+++ b/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h
@@ -55,14 +55,14 @@
* \code
* // Initialize the ADC driver before first use
* ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_32);
- *
+ *
* // Must setup the ADC channel to read beforehand
* ADC_SetupChannel(1);
- *
+ *
* // Perform a single conversion of the ADC channel 1
* ADC_GetChannelReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_CHANNEL1);
* printf("Conversion Result: %d\r\n", ADC_GetResult());
- *
+ *
* // Start reading ADC channel 1 in free running (continuous conversion) mode
* ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_CHANNEL1);
* for (;;)
diff --git a/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h
index 2e396ed55..3ca037606 100644
--- a/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h
+++ b/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h
@@ -56,17 +56,17 @@
* // Initialize the SPI driver before first use
* SPI_Init(SPI_SPEED_FCPU_DIV_2 | SPI_ORDER_MSB_FIRST | SPI_SCK_LEAD_FALLING |
* SPI_SAMPLE_TRAILING | SPI_MODE_MASTER);
- *
+ *
* // Send several bytes, ignoring the returned data
* SPI_SendByte(0x01);
* SPI_SendByte(0x02);
* SPI_SendByte(0x03);
- *
+ *
* // Receive several bytes, sending a dummy 0x00 byte each time
* uint8_t Byte1 = SPI_ReceiveByte();
* uint8_t Byte2 = SPI_ReceiveByte();
* uint8_t Byte3 = SPI_ReceiveByte();
- *
+ *
* // Send a byte, and store the received byte from the same transaction
* uint8_t ResponseByte = SPI_TransferByte(0xDC);
* \endcode
diff --git a/LUFA/Drivers/Peripheral/AVR8/SerialSPI_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/SerialSPI_AVR8.h
index 562aaecfd..24d341f03 100644
--- a/LUFA/Drivers/Peripheral/AVR8/SerialSPI_AVR8.h
+++ b/LUFA/Drivers/Peripheral/AVR8/SerialSPI_AVR8.h
@@ -53,17 +53,17 @@
* \code
* // Initialize the Master SPI mode USART driver before first use, with 1Mbit baud
* SerialSPI_Init((USART_SPI_SCK_LEAD_RISING | SPI_SAMPLE_LEADING | SPI_ORDER_MSB_FIRST), 1000000);
- *
+ *
* // Send several bytes, ignoring the returned data
* SerialSPI_SendByte(0x01);
* SerialSPI_SendByte(0x02);
* SerialSPI_SendByte(0x03);
- *
+ *
* // Receive several bytes, sending a dummy 0x00 byte each time
* uint8_t Byte1 = SerialSPI_ReceiveByte();
* uint8_t Byte2 = SerialSPI_ReceiveByte();
* uint8_t Byte3 = SerialSPI_ReceiveByte();
- *
+ *
* // Send a byte, and store the received byte from the same transaction
* uint8_t ResponseByte = SerialSPI_TransferByte(0xDC);
* \endcode
diff --git a/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h
index 687ea74ad..b7b50f434 100644
--- a/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h
+++ b/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h
@@ -53,10 +53,10 @@
* \code
* // Initialize the serial USART driver before first use, with 9600 baud (and no double-speed mode)
* Serial_Init(9600, false);
- *
+ *
* // Send a string through the USART
* Serial_TxString("Test String\r\n");
- *
+ *
* // Receive a byte through the USART
* uint8_t DataByte = Serial_RxByte();
* \endcode
diff --git a/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.h
index b9131df3c..38ad1f3e3 100644
--- a/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.h
+++ b/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.h
@@ -54,35 +54,35 @@
* \code
* // Initialize the TWI driver before first use at 200KHz
* TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 200000));
- *
+ *
* // Start a write session to device at device address 0xA0, internal address 0xDC with a 10ms timeout
* if (TWI_StartTransmission(0xA0 | TWI_ADDRESS_WRITE, 10) == TWI_ERROR_NoError)
* {
* TWI_SendByte(0xDC);
- *
+ *
* TWI_SendByte(0x01);
* TWI_SendByte(0x02);
* TWI_SendByte(0x03);
- *
+ *
* // Must stop transmission afterwards to release the bus
* TWI_StopTransmission();
* }
- *
+ *
* // Start a read session to device at address 0xA0, internal address 0xDC with a 10ms timeout
* if (TWI_StartTransmission(0xA0 | TWI_ADDRESS_WRITE, 10) == TWI_ERROR_NoError)
* {
* TWI_SendByte(0xDC);
* TWI_StopTransmission();
- *
+ *
* if (TWI_StartTransmission(0xA0 | TWI_ADDRESS_READ, 10) == TWI_ERROR_NoError)
* {
* uint8_t Byte1, Byte2, Byte3;
- *
+ *
* // Read three bytes, acknowledge after the third byte is received
* TWI_ReceiveByte(&Byte1, false);
* TWI_ReceiveByte(&Byte2, false);
* TWI_ReceiveByte(&Byte3, true);
- *
+ *
* // Must stop transmission afterwards to release the bus
* TWI_StopTransmission();
* }
@@ -93,18 +93,18 @@
* \code
* // Initialize the TWI driver before first use at 200KHz
* TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 200000));
- *
+ *
* // Start a write session to device at device address 0xA0, internal address 0xDC with a 10ms timeout
* uint8_t InternalWriteAddress = 0xDC;
* uint8_t WritePacket[3] = {0x01, 0x02, 0x03};
- *
+ *
* TWI_WritePacket(0xA0, 10, &InternalWriteAddress, sizeof(InternalWriteAddress),
* &WritePacket, sizeof(WritePacket);
- *
+ *
* // Start a read session to device at address 0xA0, internal address 0xDC with a 10ms timeout
* uint8_t InternalReadAddress = 0xDC;
* uint8_t ReadPacket[3];
- *
+ *
* TWI_ReadPacket(0xA0, 10, &InternalReadAddress, sizeof(InternalReadAddress),
* &ReadPacket, sizeof(ReadPacket);
* \endcode
diff --git a/LUFA/Drivers/Peripheral/XMEGA/SPI_XMEGA.h b/LUFA/Drivers/Peripheral/XMEGA/SPI_XMEGA.h
index a21ac1ca8..8c57dacd9 100644
--- a/LUFA/Drivers/Peripheral/XMEGA/SPI_XMEGA.h
+++ b/LUFA/Drivers/Peripheral/XMEGA/SPI_XMEGA.h
@@ -53,17 +53,17 @@
* SPI_Init(&SPIC,
* SPI_SPEED_FCPU_DIV_2 | SPI_ORDER_MSB_FIRST | SPI_SCK_LEAD_FALLING |
* SPI_SAMPLE_TRAILING | SPI_MODE_MASTER);
- *
+ *
* // Send several bytes, ignoring the returned data
* SPI_SendByte(&SPIC, 0x01);
* SPI_SendByte(&SPIC, 0x02);
* SPI_SendByte(&SPIC, 0x03);
- *
+ *
* // Receive several bytes, sending a dummy 0x00 byte each time
* uint8_t Byte1 = SPI_ReceiveByte(&SPIC);
* uint8_t Byte2 = SPI_ReceiveByte(&SPIC);
* uint8_t Byte3 = SPI_ReceiveByte(&SPIC);
- *
+ *
* // Send a byte, and store the received byte from the same transaction
* uint8_t ResponseByte = SPI_TransferByte(&SPIC, 0xDC);
* \endcode
diff --git a/LUFA/Drivers/Peripheral/XMEGA/SerialSPI_XMEGA.h b/LUFA/Drivers/Peripheral/XMEGA/SerialSPI_XMEGA.h
index a0e9e3370..64d57a3f0 100644
--- a/LUFA/Drivers/Peripheral/XMEGA/SerialSPI_XMEGA.h
+++ b/LUFA/Drivers/Peripheral/XMEGA/SerialSPI_XMEGA.h
@@ -53,17 +53,17 @@
* \code
* // Initialize the Master SPI mode USART driver before first use, with 1Mbit baud
* SerialSPI_Init(&USARTD0, (USART_SPI_SCK_LEAD_RISING | USART_SPI_SAMPLE_LEADING | USART_SPI_ORDER_MSB_FIRST), 1000000);
- *
+ *
* // Send several bytes, ignoring the returned data
* SerialSPI_SendByte(&USARTD0, 0x01);
* SerialSPI_SendByte(&USARTD0, 0x02);
* SerialSPI_SendByte(&USARTD0, 0x03);
- *
+ *
* // Receive several bytes, sending a dummy 0x00 byte each time
* uint8_t Byte1 = SerialSPI_ReceiveByte(&USARTD);
* uint8_t Byte2 = SerialSPI_ReceiveByte(&USARTD);
* uint8_t Byte3 = SerialSPI_ReceiveByte(&USARTD);
- *
+ *
* // Send a byte, and store the received byte from the same transaction
* uint8_t ResponseByte = SerialSPI_TransferByte(&USARTD0, 0xDC);
* \endcode
diff --git a/LUFA/Drivers/Peripheral/XMEGA/Serial_XMEGA.h b/LUFA/Drivers/Peripheral/XMEGA/Serial_XMEGA.h
index 283732f0f..c2cb77fd3 100644
--- a/LUFA/Drivers/Peripheral/XMEGA/Serial_XMEGA.h
+++ b/LUFA/Drivers/Peripheral/XMEGA/Serial_XMEGA.h
@@ -53,10 +53,10 @@
* \code
* // Initialize the serial USART driver before first use, with 9600 baud (and no double-speed mode)
* Serial_Init(&USARTD0, 9600, false);
- *
+ *
* // Send a string through the USART
* Serial_TxString(&USARTD0, "Test String\r\n");
- *
+ *
* // Receive a byte through the USART
* uint8_t DataByte = Serial_RxByte(&USARTD0);
* \endcode
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-05 04:51:01 +0000