diff options
Diffstat (limited to 'LUFA/Drivers/USB/Class/Device/MassStorage.h')
-rw-r--r-- | LUFA/Drivers/USB/Class/Device/MassStorage.h | 31 |
1 files changed, 19 insertions, 12 deletions
diff --git a/LUFA/Drivers/USB/Class/Device/MassStorage.h b/LUFA/Drivers/USB/Class/Device/MassStorage.h index c1874b218..cf2b5749a 100644 --- a/LUFA/Drivers/USB/Class/Device/MassStorage.h +++ b/LUFA/Drivers/USB/Class/Device/MassStorage.h @@ -36,27 +36,29 @@ #include <string.h>
+ /* Enable C linkage for C++ Compilers: */
+ #if defined(__cplusplus)
+ extern "C" {
+ #endif
+
/* Macros: */
/** Mass Storage Class specific request to reset the Mass Storage interface, ready for the next command. */
#define REQ_MassStorageReset 0xFF
/** Mass Storage Class specific request to retrieve the total number of Logical Units (drives) in the SCSI device. */
#define REQ_GetMaxLUN 0xFE
-
- /** Maximum length of a SCSI command which can be issued by the device or host in a Mass Storage bulk wrapper. */
- #define MAX_SCSI_COMMAND_LENGTH 16
/** Magic signature for a Command Block Wrapper used in the Mass Storage Bulk-Only transport protocol. */
- #define CBW_SIGNATURE 0x43425355UL
+ #define MS_CBW_SIGNATURE 0x43425355UL
/** Magic signature for a Command Status Wrapper used in the Mass Storage Bulk-Only transport protocol. */
- #define CSW_SIGNATURE 0x53425355UL
+ #define MS_CSW_SIGNATURE 0x53425355UL
/** Mask for a Command Block Wrapper's flags attribute to specify a command with data sent from host-to-device. */
- #define COMMAND_DIRECTION_DATA_OUT (0 << 7)
+ #define MS_COMMAND_DIR_DATA_OUT (0 << 7)
/** Mask for a Command Block Wrapper's flags attribute to specify a command with data sent from device-to-host. */
- #define COMMAND_DIRECTION_DATA_IN (1 << 7)
+ #define MS_COMMAND_DIR_DATA_IN (1 << 7)
/* Type defines: */
/** Type define for a Command Block Wrapper, used in the Mass Storage Bulk-Only Transport protocol. */
@@ -68,7 +70,7 @@ uint8_t Flags; /**< Command block flags, indicating command data direction */
uint8_t LUN; /**< Logical Unit number this command is issued to */
uint8_t SCSICommandLength; /**< Length of the issued SCSI command within the SCSI command data array */
- uint8_t SCSICommandData[MAX_SCSI_COMMAND_LENGTH]; /**< Issued SCSI command in the Command Block */
+ uint8_t SCSICommandData[16]; /**< Issued SCSI command in the Command Block */
} CommandBlockWrapper_t;
/** Type define for a Command Status Wrapper, used in the Mass Storage Bulk-Only Transport protocol. */
@@ -84,9 +86,9 @@ /** Enum for the possible command status wrapper return status codes. */
enum MassStorage_CommandStatusCodes_t
{
- Command_Pass = 0, /**< Command completed with no error */
- Command_Fail = 1, /**< Command failed to complete - host may check the exact error via a SCSI REQUEST SENSE command */
- Phase_Error = 2 /**< Command failed due to being invalid in the current phase */
+ SCSI_Command_Pass = 0, /**< Command completed with no error */
+ SCSI_Command_Fail = 1, /**< Command failed to complete - host may check the exact error via a SCSI REQUEST SENSE command */
+ SCSI_Phase_Error = 2 /**< Command failed due to being invalid in the current phase */
};
/* Type Defines: */
@@ -118,10 +120,15 @@ static uint8_t StreamCallback_AbortOnMassStoreReset(void);
#endif
- void USB_MS_USBTask(USB_ClassInfo_MS_t* MSInterfaceInfo);
bool USB_MS_ConfigureEndpoints(USB_ClassInfo_MS_t* MSInterfaceInfo);
void USB_MS_ProcessControlPacket(USB_ClassInfo_MS_t* MSInterfaceInfo);
+ void USB_MS_USBTask(USB_ClassInfo_MS_t* MSInterfaceInfo);
bool CALLBACK_USB_MS_SCSICommandReceived(USB_ClassInfo_MS_t* MSInterfaceInfo);
+ /* Disable C linkage for C++ Compilers: */
+ #if defined(__cplusplus)
+ }
+ #endif
+
#endif
|