diff options
Diffstat (limited to 'LUFA/Drivers/USB/Core')
41 files changed, 10015 insertions, 0 deletions
diff --git a/LUFA/Drivers/USB/Core/AVR8/Device.c b/LUFA/Drivers/USB/Core/AVR8/Device.c new file mode 100644 index 000000000..c1b37f453 --- /dev/null +++ b/LUFA/Drivers/USB/Core/AVR8/Device.c @@ -0,0 +1,53 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#define __INCLUDE_FROM_USB_DRIVER +#include "../USBMode.h" + +#if defined(USB_CAN_BE_DEVICE) + +#include "Device.h" + +void USB_Device_SendRemoteWakeup(void) +{ + if (!(USB_Options & USB_OPT_MANUAL_PLL)) + { + USB_PLL_On(); + while (!(USB_PLL_IsReady())); + } + + USB_CLK_Unfreeze(); + + UDCON |= (1 << RMWKUP); + while (!(UDCON & (1 << RMWKUP))); +} + +#endif + diff --git a/LUFA/Drivers/USB/Core/AVR8/Device.h b/LUFA/Drivers/USB/Core/AVR8/Device.h new file mode 100644 index 000000000..30088f1d9 --- /dev/null +++ b/LUFA/Drivers/USB/Core/AVR8/Device.h @@ -0,0 +1,295 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB device mode definitions (AVR8) + * + * This file contains structures, function prototypes and macros related to USB device mode. + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_Device + * \defgroup Group_Device_AVR8 Device Management (AVR8) + * + * USB Device mode related macros and enums. This module contains macros and enums which are used when + * the USB controller is initialized in device mode. + * + * @{ + */ + +#ifndef __USBDEVICE_AVR8_H__ +#define __USBDEVICE_AVR8_H__ + + /* Includes: */ + #include "../../../../Common/Common.h" + #include "../StdDescriptors.h" + #include "../USBInterrupt.h" + #include "../Endpoint.h" + + #include <avr/boot.h> + + /* Preprocessor Checks: */ + #if (defined(USE_RAM_DESCRIPTORS) && defined(USE_EEPROM_DESCRIPTORS)) + #error USE_RAM_DESCRIPTORS and USE_EEPROM_DESCRIPTORS are mutually exclusive. + #endif + + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** \name USB Device Mode Option Masks */ + //@{ + #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) || defined(__DOXYGEN__) + /** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the + * USB interface should be initialized in low speed (1.5Mb/s) mode. + * + * \note Low Speed mode is not available on all USB AVR models. + * \n + * + * \note Restrictions apply on the number, size and type of endpoints which can be used + * when running in low speed mode - refer to the USB 2.0 specification. + */ + #define USB_DEVICE_OPT_LOWSPEED (1 << 0) + #endif + + /** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the + * USB interface should be initialized in full speed (12Mb/s) mode. + */ + #define USB_DEVICE_OPT_FULLSPEED (0 << 0) + //@} + + #if (!defined(NO_INTERNAL_SERIAL) && \ + (defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1287__) || \ + defined(__AVR_ATmega32U6__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__) || \ + defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega8U2__))) + /** String descriptor index for the device's unique serial number string descriptor within the device. + * This unique serial number is used by the host to associate resources to the device (such as drivers or COM port + * number allocations) to a device regardless of the port it is plugged in to on the host. Some USB AVRs contain + * a unique serial number internally, and setting the device descriptors serial number string index to this value + * will cause it to use the internal serial number. + * + * On unsupported devices, this will evaluate to NO_DESCRIPTOR and so will force the host to create a pseudo-serial + * number for the device. + */ + #define USE_INTERNAL_SERIAL 0xDC + #else + #define USE_INTERNAL_SERIAL NO_DESCRIPTOR + #endif + + /* Function Prototypes: */ + /** Sends a Remote Wakeup request to the host. This signals to the host that the device should + * be taken out of suspended mode, and communications should resume. + * + * Typically, this is implemented so that HID devices (mice, keyboards, etc.) can wake up the + * host computer when the host has suspended all USB devices to enter a low power state. + * + * \note This macro should only be used if the device has indicated to the host that it + * supports the Remote Wakeup feature in the device descriptors, and should only be + * issued if the host is currently allowing remote wakeup events from the device (i.e., + * the \ref USB_RemoteWakeupEnabled flag is set). When the \c NO_DEVICE_REMOTE_WAKEUP compile + * time option is used, this macro is unavailable. + * \n\n + * + * \note The USB clock must be running for this function to operate. If the stack is initialized with + * the \ref USB_OPT_MANUAL_PLL option enabled, the user must ensure that the PLL is running + * before attempting to call this function. + * + * \see \ref Group_Descriptors for more information on the RMWAKEUP feature and device descriptors. + */ + void USB_Device_SendRemoteWakeup(void); + + /* Type Defines: */ + enum USB_Device_States_t + { + DEVICE_STATE_Unattached = 0, /**< Internally implemented by the library. This state indicates + * that the device is not currently connected to a host. + */ + DEVICE_STATE_Powered = 1, /**< Internally implemented by the library. This state indicates + * that the device is connected to a host, but enumeration has not + * yet begun. + */ + DEVICE_STATE_Default = 2, /**< Internally implemented by the library. This state indicates + * that the device's USB bus has been reset by the host and it is + * now waiting for the host to begin the enumeration process. + */ + DEVICE_STATE_Addressed = 3, /**< Internally implemented by the library. This state indicates + * that the device has been addressed by the USB Host, but is not + * yet configured. + */ + DEVICE_STATE_Configured = 4, /**< May be implemented by the user project. This state indicates + * that the device has been enumerated by the host and is ready + * for USB communications to begin. + */ + DEVICE_STATE_Suspended = 5, /**< May be implemented by the user project. This state indicates + * that the USB bus has been suspended by the host, and the device + * should power down to a minimal power level until the bus is + * resumed. + */ + }; + + /* Inline Functions: */ + /** Returns the current USB frame number, when in device mode. Every millisecond the USB bus is active (i.e. enumerated to a host) + * the frame number is incremented by one. + */ + static inline uint16_t USB_Device_GetFrameNumber(void) + { + return UDFNUM; + } + + #if !defined(NO_SOF_EVENTS) + /** Enables the device mode Start Of Frame events. When enabled, this causes the + * \ref EVENT_USB_Device_StartOfFrame() event to fire once per millisecond, synchronized to the USB bus, + * at the start of each USB frame when enumerated in device mode. + * + * \note Not available when the \c NO_SOF_EVENTS compile time token is defined. + */ + static inline void USB_Device_EnableSOFEvents(void) ATTR_ALWAYS_INLINE; + static inline void USB_Device_EnableSOFEvents(void) + { + USB_INT_Enable(USB_INT_SOFI); + } + + /** Disables the device mode Start Of Frame events. When disabled, this stops the firing of the + * \ref EVENT_USB_Device_StartOfFrame() event when enumerated in device mode. + * + * \note Not available when the \c NO_SOF_EVENTS compile time token is defined. + */ + static inline void USB_Device_DisableSOFEvents(void) ATTR_ALWAYS_INLINE; + static inline void USB_Device_DisableSOFEvents(void) + { + USB_INT_Disable(USB_INT_SOFI); + } + #endif + + /* Function Prototypes: */ + /** Function to retrieve a given descriptor's size and memory location from the given descriptor type value, + * index and language ID. This function MUST be overridden in the user application (added with full, identical + * prototype and name so that the library can call it to retrieve descriptor data. + * + * \param[in] wValue The type of the descriptor to retrieve in the upper byte, and the index in the + * lower byte (when more than one descriptor of the given type exists, such as the + * case of string descriptors). The type may be one of the standard types defined + * in the DescriptorTypes_t enum, or may be a class-specific descriptor type value. + * \param[in] wIndex The language ID of the string to return if the \c wValue type indicates + * \ref DTYPE_String, otherwise zero for standard descriptors, or as defined in a + * class-specific standards. + * \param[out] DescriptorAddress Pointer to the descriptor in memory. This should be set by the routine to + * the address of the descriptor. + * \param[out] MemoryAddressSpace A value from the \ref USB_DescriptorMemorySpaces_t enum to indicate the memory + * space in which the descriptor is stored. This parameter does not exist when one + * of the \c USE_*_DESCRIPTORS compile time options is used. + * + * \note By default, the library expects all descriptors to be located in flash memory via the \c PROGMEM attribute. + * If descriptors should be located in RAM or EEPROM instead (to speed up access in the case of RAM, or to + * allow the descriptors to be changed dynamically at runtime) either the \c USE_RAM_DESCRIPTORS or the + * \c USE_EEPROM_DESCRIPTORS tokens may be defined in the project makefile and passed to the compiler by the -D + * switch. + * + * \return Size in bytes of the descriptor if it exists, zero or \ref NO_DESCRIPTOR otherwise. + */ + uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, + const uint8_t wIndex, + const void** const DescriptorAddress + #if !defined(USE_FLASH_DESCRIPTORS) && !defined(USE_EEPROM_DESCRIPTORS) && !defined(USE_RAM_DESCRIPTORS) + , uint8_t* MemoryAddressSpace + #endif + ) ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Inline Functions: */ + #if (defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)) + static inline void USB_Device_SetLowSpeed(void) ATTR_ALWAYS_INLINE; + static inline void USB_Device_SetLowSpeed(void) + { + UDCON |= (1 << LSM); + } + + static inline void USB_Device_SetFullSpeed(void) ATTR_ALWAYS_INLINE; + static inline void USB_Device_SetFullSpeed(void) + { + UDCON &= ~(1 << LSM); + } + #endif + + static inline void USB_Device_SetDeviceAddress(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void USB_Device_SetDeviceAddress(const uint8_t Address) + { + UDADDR = ((UDADDR & (1 << ADDEN)) | (Address & 0x7F)); + UDADDR |= (1 << ADDEN); + } + + static inline bool USB_Device_IsAddressSet(void) ATTR_ALWAYS_INLINE; + static inline bool USB_Device_IsAddressSet(void) + { + return (UDADDR & (1 << ADDEN)); + } + + static inline uint8_t USB_Device_GetSerialString(wchar_t* UnicodeString, const uint8_t MaxLen) + { + uint8_t SerialCharNum = 0; + + ATOMIC_BLOCK(ATOMIC_RESTORESTATE) + { + uint8_t SigReadAddress = 0x0E; + + for (SerialCharNum = 0; SerialCharNum < MIN(MaxLen, 20); SerialCharNum++) + { + if (SerialCharNum == MaxLen) + break; + + uint8_t SerialByte = boot_signature_byte_get(SigReadAddress); + + if (SerialCharNum & 0x01) + { + SerialByte >>= 4; + SigReadAddress++; + } + + SerialByte &= 0x0F; + + UnicodeString[SerialCharNum] = (SerialByte >= 10) ? + (('A' - 10) + SerialByte) : ('0' + SerialByte); + } + } + + return SerialCharNum; + } + + #endif + +#endif + +/** @} */ + diff --git a/LUFA/Drivers/USB/Core/AVR8/Endpoint.c b/LUFA/Drivers/USB/Core/AVR8/Endpoint.c new file mode 100644 index 000000000..c4e32c028 --- /dev/null +++ b/LUFA/Drivers/USB/Core/AVR8/Endpoint.c @@ -0,0 +1,182 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#define __INCLUDE_FROM_USB_DRIVER +#include "../USBMode.h" + +#if defined(USB_CAN_BE_DEVICE) + +#include "Endpoint.h" + +#if !defined(FIXED_CONTROL_ENDPOINT_SIZE) +uint8_t USB_ControlEndpointSize = ENDPOINT_CONTROLEP_DEFAULT_SIZE; +#endif + +bool Endpoint_ConfigureEndpoint_Prv(const uint8_t Number, + const uint8_t UECFG0XData, + const uint8_t UECFG1XData) +{ +#if defined(CONTROL_ONLY_DEVICE) || defined(ORDERED_EP_CONFIG) + Endpoint_SelectEndpoint(Number); + Endpoint_EnableEndpoint(); + + UECFG1X = 0; + UECFG0X = UECFG0XData; + UECFG1X = UECFG1XData; + + return Endpoint_IsConfigured(); +#else + for (uint8_t EPNum = Number; EPNum < ENDPOINT_TOTAL_ENDPOINTS; EPNum++) + { + uint8_t UECFG0XTemp; + uint8_t UECFG1XTemp; + uint8_t UEIENXTemp; + + Endpoint_SelectEndpoint(EPNum); + + if (EPNum == Number) + { + UECFG0XTemp = UECFG0XData; + UECFG1XTemp = UECFG1XData; + UEIENXTemp = 0; + } + else + { + UECFG0XTemp = UECFG0X; + UECFG1XTemp = UECFG1X; + UEIENXTemp = UEIENX; + } + + if (!(UECFG1XTemp & (1 << ALLOC))) + continue; + + Endpoint_DisableEndpoint(); + UECFG1X &= (1 << ALLOC); + + Endpoint_EnableEndpoint(); + UECFG0X = UECFG0XTemp; + UECFG1X = UECFG1XTemp; + UEIENX = UEIENXTemp; + + if (!(Endpoint_IsConfigured())) + return false; + } + + Endpoint_SelectEndpoint(Number); + return true; +#endif +} + +void Endpoint_ClearEndpoints(void) +{ + UEINT = 0; + + for (uint8_t EPNum = 0; EPNum < ENDPOINT_TOTAL_ENDPOINTS; EPNum++) + { + Endpoint_SelectEndpoint(EPNum); + UEIENX = 0; + UEINTX = 0; + UECFG1X = 0; + Endpoint_DisableEndpoint(); + } +} + +void Endpoint_ClearStatusStage(void) +{ + if (USB_ControlRequest.bmRequestType & REQDIR_DEVICETOHOST) + { + while (!(Endpoint_IsOUTReceived())) + { + if (USB_DeviceState == DEVICE_STATE_Unattached) + return; + } + + Endpoint_ClearOUT(); + } + else + { + while (!(Endpoint_IsINReady())) + { + if (USB_DeviceState == DEVICE_STATE_Unattached) + return; + } + + Endpoint_ClearIN(); + } +} + +#if !defined(CONTROL_ONLY_DEVICE) +uint8_t Endpoint_WaitUntilReady(void) +{ + #if (USB_STREAM_TIMEOUT_MS < 0xFF) + uint8_t TimeoutMSRem = USB_STREAM_TIMEOUT_MS; + #else + uint16_t TimeoutMSRem = USB_STREAM_TIMEOUT_MS; + #endif + + uint16_t PreviousFrameNumber = USB_Device_GetFrameNumber(); + + for (;;) + { + if (Endpoint_GetEndpointDirection() == ENDPOINT_DIR_IN) + { + if (Endpoint_IsINReady()) + return ENDPOINT_READYWAIT_NoError; + } + else + { + if (Endpoint_IsOUTReceived()) + return ENDPOINT_READYWAIT_NoError; + } + + uint8_t USB_DeviceState_LCL = USB_DeviceState; + + if (USB_DeviceState_LCL == DEVICE_STATE_Unattached) + return ENDPOINT_READYWAIT_DeviceDisconnected; + else if (USB_DeviceState_LCL == DEVICE_STATE_Suspended) + return ENDPOINT_READYWAIT_BusSuspended; + else if (Endpoint_IsStalled()) + return ENDPOINT_READYWAIT_EndpointStalled; + + uint16_t CurrentFrameNumber = USB_Device_GetFrameNumber(); + + if (CurrentFrameNumber != PreviousFrameNumber) + { + PreviousFrameNumber = CurrentFrameNumber; + + if (!(TimeoutMSRem--)) + return ENDPOINT_READYWAIT_Timeout; + } + } +} +#endif + +#endif + diff --git a/LUFA/Drivers/USB/Core/AVR8/Endpoint.h b/LUFA/Drivers/USB/Core/AVR8/Endpoint.h new file mode 100644 index 000000000..1feadd3c8 --- /dev/null +++ b/LUFA/Drivers/USB/Core/AVR8/Endpoint.h @@ -0,0 +1,897 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB device endpoint management definitions. + * + * This file contains structures, function prototypes and macros related to the management of the device's + * data endpoints when the library is initialized in USB device mode. + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_EndpointRW + * \defgroup Group_EndpointRW_AVR8 Endpoint Data Reading and Writing (AVR8) + * + * Functions, macros, variables, enums and types related to data reading and writing from and to endpoints. + */ + +/** \ingroup Group_EndpointPrimitiveRW + * \defgroup Group_EndpointPrimitiveRW_AVR8 Read/Write of Primitive Data Types (AVR8) + * + * Functions, macros, variables, enums and types related to data reading and writing of primitive data types + * from and to endpoints. + */ + +/** \ingroup Group_EndpointPacketManagement + * \defgroup Group_EndpointPacketManagement_AVR8 Endpoint Packet Management (AVR8) + * + * Functions, macros, variables, enums and types related to packet management of endpoints. + */ + +/** \ingroup Group_EndpointManagement + * \defgroup Group_EndpointManagement_AVR8 Endpoint Management (AVR8) + * + * Functions, macros and enums related to endpoint management when in USB Device mode. This + * module contains the endpoint management macros, as well as endpoint interrupt and data + * send/receive functions for various data types. + * + * @{ + */ + +#ifndef __ENDPOINT_AVR8_H__ +#define __ENDPOINT_AVR8_H__ + + /* Includes: */ + #include "../../../../Common/Common.h" + #include "../USBTask.h" + #include "../USBInterrupt.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Macros: */ + #define _ENDPOINT_GET_MAXSIZE(EPIndex) _ENDPOINT_GET_MAXSIZE2(ENDPOINT_DETAILS_EP ## EPIndex) + #define _ENDPOINT_GET_MAXSIZE2(EPDetails) _ENDPOINT_GET_MAXSIZE3(EPDetails) + #define _ENDPOINT_GET_MAXSIZE3(MaxSize, Banks) (MaxSize) + + #define _ENDPOINT_GET_BANKS(EPIndex) _ENDPOINT_GET_BANKS2(ENDPOINT_DETAILS_EP ## EPIndex) + #define _ENDPOINT_GET_BANKS2(EPDetails) _ENDPOINT_GET_BANKS3(EPDetails) + #define _ENDPOINT_GET_BANKS3(MaxSize, Banks) (Banks) + + #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) + #define ENDPOINT_DETAILS_MAXEP 7 + + #define ENDPOINT_DETAILS_EP0 64, 2 + #define ENDPOINT_DETAILS_EP1 256, 2 + #define ENDPOINT_DETAILS_EP2 64, 2 + #define ENDPOINT_DETAILS_EP3 64, 2 + #define ENDPOINT_DETAILS_EP4 64, 2 + #define ENDPOINT_DETAILS_EP5 64, 2 + #define ENDPOINT_DETAILS_EP6 64, 2 + #else + #define ENDPOINT_DETAILS_MAXEP 5 + + #define ENDPOINT_DETAILS_EP0 64, 2 + #define ENDPOINT_DETAILS_EP1 64, 1 + #define ENDPOINT_DETAILS_EP2 64, 1 + #define ENDPOINT_DETAILS_EP3 64, 2 + #define ENDPOINT_DETAILS_EP4 64, 2 + #endif + + /* Inline Functions: */ + static inline uint8_t Endpoint_BytesToEPSizeMask(const uint16_t Bytes) ATTR_WARN_UNUSED_RESULT ATTR_CONST + ATTR_ALWAYS_INLINE; + static inline uint8_t Endpoint_BytesToEPSizeMask(const uint16_t Bytes) + { + uint8_t MaskVal = 0; + uint16_t CheckBytes = 8; + + while (CheckBytes < Bytes) + { + MaskVal++; + CheckBytes <<= 1; + } + + return (MaskVal << EPSIZE0); + } + + /* Function Prototypes: */ + void Endpoint_ClearEndpoints(void); + bool Endpoint_ConfigureEndpoint_Prv(const uint8_t Number, + const uint8_t UECFG0XData, + const uint8_t UECFG1XData); + + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** \name Endpoint Direction Masks */ + //@{ + /** Endpoint data direction mask for \ref Endpoint_ConfigureEndpoint(). This indicates that the endpoint + * should be initialized in the OUT direction - i.e. data flows from host to device. + */ + #define ENDPOINT_DIR_OUT (0 << EPDIR) + + /** Endpoint data direction mask for \ref Endpoint_ConfigureEndpoint(). This indicates that the endpoint + * should be initialized in the IN direction - i.e. data flows from device to host. + */ + #define ENDPOINT_DIR_IN (1 << EPDIR) + //@} + + /** \name Endpoint Bank Mode Masks */ + //@{ + /** Mask for the bank mode selection for the \ref Endpoint_ConfigureEndpoint() macro. This indicates + * that the endpoint should have one single bank, which requires less USB FIFO memory but results + * in slower transfers as only one USB device (the AVR or the host) can access the endpoint's + * bank at the one time. + */ + #define ENDPOINT_BANK_SINGLE (0 << EPBK0) + + /** Mask for the bank mode selection for the \ref Endpoint_ConfigureEndpoint() macro. This indicates + * that the endpoint should have two banks, which requires more USB FIFO memory but results + * in faster transfers as one USB device (the AVR or the host) can access one bank while the other + * accesses the second bank. + */ + #define ENDPOINT_BANK_DOUBLE (1 << EPBK0) + //@} + + /** Endpoint address for the default control endpoint, which always resides in address 0. This is + * defined for convenience to give more readable code when used with the endpoint macros. + */ + #define ENDPOINT_CONTROLEP 0 + + #if (!defined(FIXED_CONTROL_ENDPOINT_SIZE) || defined(__DOXYGEN__)) + /** Default size of the default control endpoint's bank, until altered by the control endpoint bank size + * value in the device descriptor. Not available if the \c FIXED_CONTROL_ENDPOINT_SIZE token is defined. + */ + #define ENDPOINT_CONTROLEP_DEFAULT_SIZE 8 + #endif + + /** Endpoint number mask, for masking against endpoint addresses to retrieve the endpoint's + * numerical address in the device. + */ + #define ENDPOINT_EPNUM_MASK 0x07 + + /** Endpoint direction mask, for masking against endpoint addresses to retrieve the endpoint's + * direction for comparing with the \c ENDPOINT_DESCRIPTOR_DIR_* masks. + */ + #define ENDPOINT_EPDIR_MASK 0x80 + + /** Endpoint bank size mask, for masking against endpoint addresses to retrieve the endpoint's + * bank size in the device. + */ + #define ENDPOINT_EPSIZE_MASK 0x7F + + /** Retrives the maximum bank size in bytes of a given endpoint. + * + * \note This macro will only work correctly on endpoint indexes that are compile-time constants + * defined by the preprocessor. + * + * \param[in] EPIndex Endpoint number, a value between 0 and (\ref ENDPOINT_TOTAL_ENDPOINTS - 1) + */ + #define ENDPOINT_MAX_SIZE(EPIndex) _ENDPOINT_GET_MAXSIZE(EPIndex) + + /** Retrieves the total number of banks supported by the given endpoint. + * + * \note This macro will only work correctly on endpoint indexes that are compile-time constants + * defined by the preprocessor. + * + * \param[in] EPIndex Endpoint number, a value between 0 and (\ref ENDPOINT_TOTAL_ENDPOINTS - 1) + */ + #define ENDPOINT_BANKS_SUPPORTED(EPIndex) _ENDPOINT_GET_BANKS(EPIndex) + + #if !defined(CONTROL_ONLY_DEVICE) || defined(__DOXYGEN__) + /** Total number of endpoints (including the default control endpoint at address 0) which may + * be used in the device. Different USB AVR models support different amounts of endpoints, + * this value reflects the maximum number of endpoints for the currently selected AVR model. + */ + #define ENDPOINT_TOTAL_ENDPOINTS ENDPOINT_DETAILS_MAXEP + #else + #define ENDPOINT_TOTAL_ENDPOINTS 1 + #endif + + /* Enums: */ + /** Enum for the possible error return codes of the \ref Endpoint_WaitUntilReady() function. + * + * \ingroup Group_EndpointRW_AVR8 + */ + enum Endpoint_WaitUntilReady_ErrorCodes_t + { + ENDPOINT_READYWAIT_NoError = 0, /**< Endpoint is ready for next packet, no error. */ + ENDPOINT_READYWAIT_EndpointStalled = 1, /**< The endpoint was stalled during the stream + * transfer by the host or device. + */ + ENDPOINT_READYWAIT_DeviceDisconnected = 2, /**< Device was disconnected from the host while + * waiting for the endpoint to become ready. + */ + ENDPOINT_READYWAIT_BusSuspended = 3, /**< The USB bus has been suspended by the host and + * no USB endpoint traffic can occur until the bus + * has resumed. + */ + ENDPOINT_READYWAIT_Timeout = 4, /**< The host failed to accept or send the next packet + * within the software timeout period set by the + * \ref USB_STREAM_TIMEOUT_MS macro. + */ + }; + + /* Inline Functions: */ + /** Configures the specified endpoint number with the given endpoint type, direction, bank size + * and banking mode. Once configured, the endpoint may be read from or written to, depending + * on its direction. + * + * \param[in] Number Endpoint number to configure. This must be more than 0 and less than + * \ref ENDPOINT_TOTAL_ENDPOINTS. + * + * \param[in] Type Type of endpoint to configure, a \c EP_TYPE_* mask. Not all endpoint types + * are available on Low Speed USB devices - refer to the USB 2.0 specification. + * + * \param[in] Direction Endpoint data direction, either \ref ENDPOINT_DIR_OUT or \ref ENDPOINT_DIR_IN. + * All endpoints (except Control type) are unidirectional - data may only be read + * from or written to the endpoint bank based on its direction, not both. + * + * \param[in] Size Size of the endpoint's bank, where packets are stored before they are transmitted + * to the USB host, or after they have been received from the USB host (depending on + * the endpoint's data direction). The bank size must indicate the maximum packet size + * that the endpoint can handle. + * + * \param[in] Banks Number of banks to use for the endpoint being configured, an \c ENDPOINT_BANK_* mask. + * More banks uses more USB DPRAM, but offers better performance. Isochronous type + * endpoints <b>must</b> have at least two banks. + * + * \note When the \c ORDERED_EP_CONFIG compile time option is used, Endpoints <b>must</b> be configured in + * ascending order, or bank corruption will occur. + * \n\n + * + * \note Certain models of USB AVR's endpoints may have different maximum packet sizes based on the endpoint's + * index - refer to the chosen USB AVR's datasheet to determine the maximum bank size for each endpoint. + * \n\n + * + * \note The default control endpoint should not be manually configured by the user application, as + * it is automatically configured by the library internally. + * \n\n + * + * \note This routine will automatically select the specified endpoint upon success. Upon failure, the endpoint + * which failed to reconfigure correctly will be selected. + * + * \return Boolean \c true if the configuration succeeded, \c false otherwise. + */ + static inline bool Endpoint_ConfigureEndpoint(const uint8_t Number, + const uint8_t Type, + const uint8_t Direction, + const uint16_t Size, + const uint8_t Banks) ATTR_ALWAYS_INLINE; + static inline bool Endpoint_ConfigureEndpoint(const uint8_t Number, + const uint8_t Type, + const uint8_t Direction, + const uint16_t Size, + const uint8_t Banks) + { + return Endpoint_ConfigureEndpoint_Prv(Number, (((Type) << EPTYPE0) | (Direction)), + ((1 << ALLOC) | Banks | Endpoint_BytesToEPSizeMask(Size))); + } + + /** Indicates the number of bytes currently stored in the current endpoint's selected bank. + * + * \note The return width of this function may differ, depending on the maximum endpoint bank size + * of the selected AVR model. + * + * \ingroup Group_EndpointRW_AVR8 + * + * \return Total number of bytes in the currently selected Endpoint's FIFO buffer. + */ + static inline uint16_t Endpoint_BytesInEndpoint(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint16_t Endpoint_BytesInEndpoint(void) + { + #if defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) + return UEBCX; + #elif defined(USB_SERIES_4_AVR) + return (((uint16_t)UEBCHX << 8) | UEBCLX); + #elif defined(USB_SERIES_2_AVR) + return UEBCLX; + #endif + } + + /** Get the endpoint address of the currently selected endpoint. This is typically used to save + * the currently selected endpoint number so that it can be restored after another endpoint has + * been manipulated. + * + * \return Index of the currently selected endpoint. + */ + static inline uint8_t Endpoint_GetCurrentEndpoint(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Endpoint_GetCurrentEndpoint(void) + { + #if !defined(CONTROL_ONLY_DEVICE) + return (UENUM & ENDPOINT_EPNUM_MASK); + #else + return ENDPOINT_CONTROLEP; + #endif + } + + /** Selects the given endpoint number. If the address from the device descriptors is used, the + * value should be masked with the \ref ENDPOINT_EPNUM_MASK constant to extract only the endpoint + * number (and discarding the endpoint direction bit). + * + * Any endpoint operations which do not require the endpoint number to be indicated will operate on + * the currently selected endpoint. + * + * \param[in] EndpointNumber Endpoint number to select. + */ + static inline void Endpoint_SelectEndpoint(const uint8_t EndpointNumber) ATTR_ALWAYS_INLINE; + static inline void Endpoint_SelectEndpoint(const uint8_t EndpointNumber) + { + #if !defined(CONTROL_ONLY_DEVICE) + UENUM = EndpointNumber; + #endif + } + + /** Resets the endpoint bank FIFO. This clears all the endpoint banks and resets the USB controller's + * data In and Out pointers to the bank's contents. + * + * \param[in] EndpointNumber Endpoint number whose FIFO buffers are to be reset. + */ + static inline void Endpoint_ResetFIFO(const uint8_t EndpointNumber) ATTR_ALWAYS_INLINE; + static inline void Endpoint_ResetFIFO(const uint8_t EndpointNumber) + { + UERST = (1 << EndpointNumber); + UERST = 0; + } + + /** Enables the currently selected endpoint so that data can be sent and received through it to + * and from a host. + * + * \note Endpoints must first be configured properly via \ref Endpoint_ConfigureEndpoint(). + */ + static inline void Endpoint_EnableEndpoint(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_EnableEndpoint(void) + { + UECONX |= (1 << EPEN); + } + + /** Disables the currently selected endpoint so that data cannot be sent and received through it + * to and from a host. + */ + static inline void Endpoint_DisableEndpoint(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_DisableEndpoint(void) + { + UECONX &= ~(1 << EPEN); + } + + /** Determines if the currently selected endpoint is enabled, but not necessarily configured. + * + * \return Boolean \c true if the currently selected endpoint is enabled, \c false otherwise. + */ + static inline bool Endpoint_IsEnabled(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Endpoint_IsEnabled(void) + { + return ((UECONX & (1 << EPEN)) ? true : false); + } + + /** Aborts all pending IN transactions on the currently selected endpoint, once the bank + * has been queued for transmission to the host via \ref Endpoint_ClearIN(). This function + * will terminate all queued transactions, resetting the endpoint banks ready for a new + * packet. + * + * \ingroup Group_EndpointPacketManagement_AVR8 + */ + static inline void Endpoint_AbortPendingIN(void) + { + while (UESTA0X & (0x03 << NBUSYBK0)) + { + UEINTX |= (1 << RXOUTI); + while (UEINTX & (1 << RXOUTI)); + } + } + + /** Retrieves the number of busy banks in the currently selected endpoint, which have been queued for + * transmission via the \ref Endpoint_ClearIN() command, or are awaiting acknowledgement via the + * \ref Endpoint_ClearOUT() command. + * + * \ingroup Group_EndpointPacketManagement_AVR8 + * + * \return Total number of busy banks in the selected endpoint. + */ + static inline uint8_t Endpoint_GetBusyBanks(void) + { + return (UESTA0X & (0x03 << NBUSYBK0)); + } + + /** Determines if the currently selected endpoint may be read from (if data is waiting in the endpoint + * bank and the endpoint is an OUT direction, or if the bank is not yet full if the endpoint is an IN + * direction). This function will return false if an error has occurred in the endpoint, if the endpoint + * is an OUT direction and no packet (or an empty packet) has been received, or if the endpoint is an IN + * direction and the endpoint bank is full. + * + * \ingroup Group_EndpointPacketManagement_AVR8 + * + * \return Boolean \c true if the currently selected endpoint may be read from or written to, depending + * on its direction. + */ + static inline bool Endpoint_IsReadWriteAllowed(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Endpoint_IsReadWriteAllowed(void) + { + return ((UEINTX & (1 << RWAL)) ? true : false); + } + + /** Determines if the currently selected endpoint is configured. + * + * \return Boolean \c true if the currently selected endpoint has been configured, \c false otherwise. + */ + static inline bool Endpoint_IsConfigured(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Endpoint_IsConfigured(void) + { + return ((UESTA0X & (1 << CFGOK)) ? true : false); + } + + /** Returns a mask indicating which INTERRUPT type endpoints have interrupted - i.e. their + * interrupt duration has elapsed. Which endpoints have interrupted can be determined by + * masking the return value against <tt>(1 << <i>{Endpoint Number}</i>)</tt>. + * + * \return Mask whose bits indicate which endpoints have interrupted. + */ + static inline uint8_t Endpoint_GetEndpointInterrupts(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Endpoint_GetEndpointInterrupts(void) + { + return UEINT; + } + + /** Determines if the specified endpoint number has interrupted (valid only for INTERRUPT type + * endpoints). + * + * \param[in] EndpointNumber Index of the endpoint whose interrupt flag should be tested. + * + * \return Boolean \c true if the specified endpoint has interrupted, \c false otherwise. + */ + static inline bool Endpoint_HasEndpointInterrupted(const uint8_t EndpointNumber) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Endpoint_HasEndpointInterrupted(const uint8_t EndpointNumber) + { + return ((UEINT & (1 << EndpointNumber)) ? true : false); + } + + /** Determines if the selected IN endpoint is ready for a new packet to be sent to the host. + * + * \ingroup Group_EndpointPacketManagement_AVR8 + * + * \return Boolean \c true if the current endpoint is ready for an IN packet, \c false otherwise. + */ + static inline bool Endpoint_IsINReady(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Endpoint_IsINReady(void) + { + return ((UEINTX & (1 << TXINI)) ? true : false); + } + + /** Determines if the selected OUT endpoint has received new packet from the host. + * + * \ingroup Group_EndpointPacketManagement_AVR8 + * + * \return Boolean \c true if current endpoint is has received an OUT packet, \c false otherwise. + */ + static inline bool Endpoint_IsOUTReceived(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Endpoint_IsOUTReceived(void) + { + return ((UEINTX & (1 << RXOUTI)) ? true : false); + } + + /** Determines if the current CONTROL type endpoint has received a SETUP packet. + * + * \ingroup Group_EndpointPacketManagement_AVR8 + * + * \return Boolean \c true if the selected endpoint has received a SETUP packet, \c false otherwise. + */ + static inline bool Endpoint_IsSETUPReceived(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Endpoint_IsSETUPReceived(void) + { + return ((UEINTX & (1 << RXSTPI)) ? true : false); + } + + /** Clears a received SETUP packet on the currently selected CONTROL type endpoint, freeing up the + * endpoint for the next packet. + * + * \ingroup Group_EndpointPacketManagement_AVR8 + * + * \note This is not applicable for non CONTROL type endpoints. + */ + static inline void Endpoint_ClearSETUP(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_ClearSETUP(void) + { + UEINTX &= ~(1 << RXSTPI); + } + + /** Sends an IN packet to the host on the currently selected endpoint, freeing up the endpoint for the + * next packet and switching to the alternative endpoint bank if double banked. + * + * \ingroup Group_EndpointPacketManagement_AVR8 + */ + static inline void Endpoint_ClearIN(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_ClearIN(void) + { + #if !defined(CONTROL_ONLY_DEVICE) + UEINTX &= ~((1 << TXINI) | (1 << FIFOCON)); + #else + UEINTX &= ~(1 << TXINI); + #endif + } + + /** Acknowledges an OUT packet to the host on the currently selected endpoint, freeing up the endpoint + * for the next packet and switching to the alternative endpoint bank if double banked. + * + * \ingroup Group_EndpointPacketManagement_AVR8 + */ + static inline void Endpoint_ClearOUT(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_ClearOUT(void) + { + #if !defined(CONTROL_ONLY_DEVICE) + UEINTX &= ~((1 << RXOUTI) | (1 << FIFOCON)); + #else + UEINTX &= ~(1 << RXOUTI); + #endif + } + + /** Stalls the current endpoint, indicating to the host that a logical problem occurred with the + * indicated endpoint and that the current transfer sequence should be aborted. This provides a + * way for devices to indicate invalid commands to the host so that the current transfer can be + * aborted and the host can begin its own recovery sequence. + * + * The currently selected endpoint remains stalled until either the \ref Endpoint_ClearStall() macro + * is called, or the host issues a CLEAR FEATURE request to the device for the currently selected + * endpoint. + * + * \ingroup Group_EndpointPacketManagement_AVR8 + */ + static inline void Endpoint_StallTransaction(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_StallTransaction(void) + { + UECONX |= (1 << STALLRQ); + } + + /** Clears the STALL condition on the currently selected endpoint. + * + * \ingroup Group_EndpointPacketManagement_AVR8 + */ + static inline void Endpoint_ClearStall(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_ClearStall(void) + { + UECONX |= (1 << STALLRQC); + } + + /** Determines if the currently selected endpoint is stalled, false otherwise. + * + * \ingroup Group_EndpointPacketManagement_AVR8 + * + * \return Boolean \c true if the currently selected endpoint is stalled, \c false otherwise. + */ + static inline bool Endpoint_IsStalled(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Endpoint_IsStalled(void) + { + return ((UECONX & (1 << STALLRQ)) ? true : false); + } + + /** Resets the data toggle of the currently selected endpoint. */ + static inline void Endpoint_ResetDataToggle(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_ResetDataToggle(void) + { + UECONX |= (1 << RSTDT); + } + + /** Determines the currently selected endpoint's direction. + * + * \return The currently selected endpoint's direction, as a \c ENDPOINT_DIR_* mask. + */ + static inline uint8_t Endpoint_GetEndpointDirection(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Endpoint_GetEndpointDirection(void) + { + return (UECFG0X & ENDPOINT_DIR_IN); + } + + /** Sets the direction of the currently selected endpoint. + * + * \param[in] DirectionMask New endpoint direction, as a \c ENDPOINT_DIR_* mask. + */ + static inline void Endpoint_SetEndpointDirection(const uint8_t DirectionMask) ATTR_ALWAYS_INLINE; + static inline void Endpoint_SetEndpointDirection(const uint8_t DirectionMask) + { + UECFG0X = ((UECFG0X & ~ENDPOINT_DIR_IN) | DirectionMask); + } + + /** Reads one byte from the currently selected endpoint's bank, for OUT direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_AVR8 + * + * \return Next byte in the currently selected endpoint's FIFO buffer. + */ + static inline uint8_t Endpoint_Read_Byte(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Endpoint_Read_Byte(void) + { + return UEDATX; + } + + /** Writes one byte from the currently selected endpoint's bank, for IN direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_AVR8 + * + * \param[in] Byte Next byte to write into the the currently selected endpoint's FIFO buffer. + */ + static inline void Endpoint_Write_Byte(const uint8_t Byte) ATTR_ALWAYS_INLINE; + static inline void Endpoint_Write_Byte(const uint8_t Byte) + { + UEDATX = Byte; + } + + /** Discards one byte from the currently selected endpoint's bank, for OUT direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_AVR8 + */ + static inline void Endpoint_Discard_Byte(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_Discard_Byte(void) + { + uint8_t Dummy; + + Dummy = UEDATX; + } + + /** Reads two bytes from the currently selected endpoint's bank in little endian format, for OUT + * direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_AVR8 + * + * \return Next word in the currently selected endpoint's FIFO buffer. + */ + static inline uint16_t Endpoint_Read_Word_LE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint16_t Endpoint_Read_Word_LE(void) + { + union + { + uint16_t Word; + uint8_t Bytes[2]; + } Data; + + Data.Bytes[0] = UEDATX; + Data.Bytes[1] = UEDATX; + + return Data.Word; + } + + /** Reads two bytes from the currently selected endpoint's bank in big endian format, for OUT + * direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_AVR8 + * + * \return Next word in the currently selected endpoint's FIFO buffer. + */ + static inline uint16_t Endpoint_Read_Word_BE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint16_t Endpoint_Read_Word_BE(void) + { + union + { + uint16_t Word; + uint8_t Bytes[2]; + } Data; + + Data.Bytes[1] = UEDATX; + Data.Bytes[0] = UEDATX; + + return Data.Word; + } + + /** Writes two bytes to the currently selected endpoint's bank in little endian format, for IN + * direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_AVR8 + * + * \param[in] Word Next word to write to the currently selected endpoint's FIFO buffer. + */ + static inline void Endpoint_Write_Word_LE(const uint16_t Word) ATTR_ALWAYS_INLINE; + static inline void Endpoint_Write_Word_LE(const uint16_t Word) + { + UEDATX = (Word & 0xFF); + UEDATX = (Word >> 8); + } + + /** Writes two bytes to the currently selected endpoint's bank in big endian format, for IN + * direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_AVR8 + * + * \param[in] Word Next word to write to the currently selected endpoint's FIFO buffer. + */ + static inline void Endpoint_Write_Word_BE(const uint16_t Word) ATTR_ALWAYS_INLINE; + static inline void Endpoint_Write_Word_BE(const uint16_t Word) + { + UEDATX = (Word >> 8); + UEDATX = (Word & 0xFF); + } + + /** Discards two bytes from the currently selected endpoint's bank, for OUT direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_AVR8 + */ + static inline void Endpoint_Discard_Word(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_Discard_Word(void) + { + uint8_t Dummy; + + Dummy = UEDATX; + Dummy = UEDATX; + } + + /** Reads four bytes from the currently selected endpoint's bank in little endian format, for OUT + * direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_AVR8 + * + * \return Next double word in the currently selected endpoint's FIFO buffer. + */ + static inline uint32_t Endpoint_Read_DWord_LE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint32_t Endpoint_Read_DWord_LE(void) + { + union + { + uint32_t DWord; + uint8_t Bytes[4]; + } Data; + + Data.Bytes[0] = UEDATX; + Data.Bytes[1] = UEDATX; + Data.Bytes[2] = UEDATX; + Data.Bytes[3] = UEDATX; + + return Data.DWord; + } + + /** Reads four bytes from the currently selected endpoint's bank in big endian format, for OUT + * direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_AVR8 + * + * \return Next double word in the currently selected endpoint's FIFO buffer. + */ + static inline uint32_t Endpoint_Read_DWord_BE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint32_t Endpoint_Read_DWord_BE(void) + { + union + { + uint32_t DWord; + uint8_t Bytes[4]; + } Data; + + Data.Bytes[3] = UEDATX; + Data.Bytes[2] = UEDATX; + Data.Bytes[1] = UEDATX; + Data.Bytes[0] = UEDATX; + + return Data.DWord; + } + + /** Writes four bytes to the currently selected endpoint's bank in little endian format, for IN + * direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_AVR8 + * + * \param[in] DWord Next double word to write to the currently selected endpoint's FIFO buffer. + */ + static inline void Endpoint_Write_DWord_LE(const uint32_t DWord) ATTR_ALWAYS_INLINE; + static inline void Endpoint_Write_DWord_LE(const uint32_t DWord) + { + UEDATX = (DWord & 0xFF); + UEDATX = (DWord >> 8); + UEDATX = (DWord >> 16); + UEDATX = (DWord >> 24); + } + + /** Writes four bytes to the currently selected endpoint's bank in big endian format, for IN + * direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_AVR8 + * + * \param[in] DWord Next double word to write to the currently selected endpoint's FIFO buffer. + */ + static inline void Endpoint_Write_DWord_BE(const uint32_t DWord) ATTR_ALWAYS_INLINE; + static inline void Endpoint_Write_DWord_BE(const uint32_t DWord) + { + UEDATX = (DWord >> 24); + UEDATX = (DWord >> 16); + UEDATX = (DWord >> 8); + UEDATX = (DWord & 0xFF); + } + + /** Discards four bytes from the currently selected endpoint's bank, for OUT direction endpoints. + * + * \ingroup Group_EndpointPrimitiveRW_AVR8 + */ + static inline void Endpoint_Discard_DWord(void) ATTR_ALWAYS_INLINE; + static inline void Endpoint_Discard_DWord(void) + { + uint8_t Dummy; + + Dummy = UEDATX; + Dummy = UEDATX; + Dummy = UEDATX; + Dummy = UEDATX; + } + + /* External Variables: */ + /** Global indicating the maximum packet size of the default control endpoint located at address + * 0 in the device. This value is set to the value indicated in the device descriptor in the user + * project once the USB interface is initialized into device mode. + * + * If space is an issue, it is possible to fix this to a static value by defining the control + * endpoint size in the \c FIXED_CONTROL_ENDPOINT_SIZE token passed to the compiler in the makefile + * via the -D switch. When a fixed control endpoint size is used, the size is no longer dynamically + * read from the descriptors at runtime and instead fixed to the given value. When used, it is + * important that the descriptor control endpoint size value matches the size given as the + * \c FIXED_CONTROL_ENDPOINT_SIZE token - it is recommended that the \c FIXED_CONTROL_ENDPOINT_SIZE token + * be used in the device descriptors to ensure this. + * + * \note This variable should be treated as read-only in the user application, and never manually + * changed in value. + */ + #if (!defined(FIXED_CONTROL_ENDPOINT_SIZE) || defined(__DOXYGEN__)) + extern uint8_t USB_ControlEndpointSize; + #else + #define USB_ControlEndpointSize FIXED_CONTROL_ENDPOINT_SIZE + #endif + + /* Function Prototypes: */ + /** Completes the status stage of a control transfer on a CONTROL type endpoint automatically, + * with respect to the data direction. This is a convenience function which can be used to + * simplify user control request handling. + */ + void Endpoint_ClearStatusStage(void); + + /** Spin-loops until the currently selected non-control endpoint is ready for the next packet of data + * to be read or written to it. + * + * \note This routine should not be called on CONTROL type endpoints. + * + * \ingroup Group_EndpointRW_AVR8 + * + * \return A value from the \ref Endpoint_WaitUntilReady_ErrorCodes_t enum. + */ + uint8_t Endpoint_WaitUntilReady(void); + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/LUFA/Drivers/USB/Core/AVR8/Host.c b/LUFA/Drivers/USB/Core/AVR8/Host.c new file mode 100644 index 000000000..214d19398 --- /dev/null +++ b/LUFA/Drivers/USB/Core/AVR8/Host.c @@ -0,0 +1,355 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#define __INCLUDE_FROM_USB_DRIVER +#include "../USBMode.h" + +#if defined(USB_CAN_BE_HOST) + +#define __INCLUDE_FROM_HOST_C +#include "Host.h" + +void USB_Host_ProcessNextHostState(void) +{ + uint8_t ErrorCode = HOST_ENUMERROR_NoError; + uint8_t SubErrorCode = HOST_ENUMERROR_NoError; + + static uint16_t WaitMSRemaining; + static uint8_t PostWaitState; + + switch (USB_HostState) + { + case HOST_STATE_WaitForDevice: + if (WaitMSRemaining) + { + if ((SubErrorCode = USB_Host_WaitMS(1)) != HOST_WAITERROR_Successful) + { + USB_HostState = PostWaitState; + ErrorCode = HOST_ENUMERROR_WaitStage; + break; + } + + if (!(--WaitMSRemaining)) + USB_HostState = PostWaitState; + } + + break; + case HOST_STATE_Powered: + WaitMSRemaining = HOST_DEVICE_SETTLE_DELAY_MS; + + USB_HostState = HOST_STATE_Powered_WaitForDeviceSettle; + break; + case HOST_STATE_Powered_WaitForDeviceSettle: + if (WaitMSRemaining--) + { + _delay_ms(1); + break; + } + else + { + USB_Host_VBUS_Manual_Off(); + + USB_OTGPAD_On(); + USB_Host_VBUS_Auto_Enable(); + USB_Host_VBUS_Auto_On(); + + USB_HostState = HOST_STATE_Powered_WaitForConnect; + } + + break; + case HOST_STATE_Powered_WaitForConnect: + if (USB_INT_HasOccurred(USB_INT_DCONNI)) + { + USB_INT_Clear(USB_INT_DCONNI); + USB_INT_Clear(USB_INT_DDISCI); + + USB_INT_Clear(USB_INT_VBERRI); + USB_INT_Enable(USB_INT_VBERRI); + + USB_Host_ResumeBus(); + Pipe_ClearPipes(); + + HOST_TASK_NONBLOCK_WAIT(100, HOST_STATE_Powered_DoReset); + } + + break; + case HOST_STATE_Powered_DoReset: + USB_Host_ResetDevice(); + + HOST_TASK_NONBLOCK_WAIT(200, HOST_STATE_Powered_ConfigPipe); + break; + case HOST_STATE_Powered_ConfigPipe: + Pipe_ConfigurePipe(PIPE_CONTROLPIPE, EP_TYPE_CONTROL, + PIPE_TOKEN_SETUP, ENDPOINT_CONTROLEP, + PIPE_CONTROLPIPE_DEFAULT_SIZE, PIPE_BANK_SINGLE); + + if (!(Pipe_IsConfigured())) + { + ErrorCode = HOST_ENUMERROR_PipeConfigError; + SubErrorCode = 0; + break; + } + + USB_HostState = HOST_STATE_Default; + break; + case HOST_STATE_Default: + USB_ControlRequest = (USB_Request_Header_t) + { + .bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE), + .bRequest = REQ_GetDescriptor, + .wValue = (DTYPE_Device << 8), + .wIndex = 0, + .wLength = 8, + }; + + uint8_t DataBuffer[8]; + + if ((SubErrorCode = USB_Host_SendControlRequest(DataBuffer)) != HOST_SENDCONTROL_Successful) + { + ErrorCode = HOST_ENUMERROR_ControlError; + break; + } + + USB_ControlPipeSize = DataBuffer[offsetof(USB_Descriptor_Device_t, Endpoint0Size)]; + + USB_Host_ResetDevice(); + + HOST_TASK_NONBLOCK_WAIT(200, HOST_STATE_Default_PostReset); + break; + case HOST_STATE_Default_PostReset: + Pipe_ConfigurePipe(PIPE_CONTROLPIPE, EP_TYPE_CONTROL, + PIPE_TOKEN_SETUP, ENDPOINT_CONTROLEP, + USB_ControlPipeSize, PIPE_BANK_SINGLE); + + if (!(Pipe_IsConfigured())) + { + ErrorCode = HOST_ENUMERROR_PipeConfigError; + SubErrorCode = 0; + break; + } + + USB_ControlRequest = (USB_Request_Header_t) + { + .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE), + .bRequest = REQ_SetAddress, + .wValue = USB_HOST_DEVICEADDRESS, + .wIndex = 0, + .wLength = 0, + }; + + if ((SubErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful) + { + ErrorCode = HOST_ENUMERROR_ControlError; + break; + } + + HOST_TASK_NONBLOCK_WAIT(100, HOST_STATE_Default_PostAddressSet); + break; + case HOST_STATE_Default_PostAddressSet: + USB_Host_SetDeviceAddress(USB_HOST_DEVICEADDRESS); + + EVENT_USB_Host_DeviceEnumerationComplete(); + USB_HostState = HOST_STATE_Addressed; + break; + } + + if ((ErrorCode != HOST_ENUMERROR_NoError) && (USB_HostState != HOST_STATE_Unattached)) + { + EVENT_USB_Host_DeviceEnumerationFailed(ErrorCode, SubErrorCode); + + USB_Host_VBUS_Auto_Off(); + + EVENT_USB_Host_DeviceUnattached(); + + USB_ResetInterface(); + } +} + +uint8_t USB_Host_WaitMS(uint8_t MS) +{ + bool BusSuspended = USB_Host_IsBusSuspended(); + uint8_t ErrorCode = HOST_WAITERROR_Successful; + bool HSOFIEnabled = USB_INT_IsEnabled(USB_INT_HSOFI); + + USB_INT_Disable(USB_INT_HSOFI); + USB_INT_Clear(USB_INT_HSOFI); + + USB_Host_ResumeBus(); + + while (MS) + { + if (USB_INT_HasOccurred(USB_INT_HSOFI)) + { + USB_INT_Clear(USB_INT_HSOFI); + MS--; + } + + if ((USB_HostState == HOST_STATE_Unattached) || (USB_CurrentMode != USB_MODE_Host)) + { + ErrorCode = HOST_WAITERROR_DeviceDisconnect; + + break; + } + + if (Pipe_IsError() == true) + { + Pipe_ClearError(); + ErrorCode = HOST_WAITERROR_PipeError; + + break; + } + + if (Pipe_IsStalled() == true) + { + Pipe_ClearStall(); + ErrorCode = HOST_WAITERROR_SetupStalled; + + break; + } + } + + if (BusSuspended) + USB_Host_SuspendBus(); + + if (HSOFIEnabled) + USB_INT_Enable(USB_INT_HSOFI); + + return ErrorCode; +} + +static void USB_Host_ResetDevice(void) +{ + bool BusSuspended = USB_Host_IsBusSuspended(); + + USB_INT_Disable(USB_INT_DDISCI); + + USB_Host_ResetBus(); + while (!(USB_Host_IsBusResetComplete())); + USB_Host_ResumeBus(); + + bool HSOFIEnabled = USB_INT_IsEnabled(USB_INT_HSOFI); + + USB_INT_Disable(USB_INT_HSOFI); + USB_INT_Clear(USB_INT_HSOFI); + + for (uint8_t MSRem = 10; MSRem != 0; MSRem--) + { + /* Workaround for powerless-pull-up devices. After a USB bus reset, + all disconnection interrupts are suppressed while a USB frame is + looked for - if it is found within 10ms, the device is still + present. */ + + if (USB_INT_HasOccurred(USB_INT_HSOFI)) + { + USB_INT_Clear(USB_INT_HSOFI); + USB_INT_Clear(USB_INT_DDISCI); + break; + } + + _delay_ms(1); + } + + if (HSOFIEnabled) + USB_INT_Enable(USB_INT_HSOFI); + + if (BusSuspended) + USB_Host_SuspendBus(); + + USB_INT_Enable(USB_INT_DDISCI); +} + +uint8_t USB_Host_SetDeviceConfiguration(const uint8_t ConfigNumber) +{ + USB_ControlRequest = (USB_Request_Header_t) + { + .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE), + .bRequest = REQ_SetConfiguration, + .wValue = ConfigNumber, + .wIndex = 0, + .wLength = 0, + }; + + Pipe_SelectPipe(PIPE_CONTROLPIPE); + + return USB_Host_SendControlRequest(NULL); +} + +uint8_t USB_Host_GetDeviceDescriptor(void* const DeviceDescriptorPtr) +{ + USB_ControlRequest = (USB_Request_Header_t) + { + .bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE), + .bRequest = REQ_GetDescriptor, + .wValue = (DTYPE_Device << 8), + .wIndex = 0, + .wLength = sizeof(USB_Descriptor_Device_t), + }; + + Pipe_SelectPipe(PIPE_CONTROLPIPE); + + return USB_Host_SendControlRequest(DeviceDescriptorPtr); +} + +uint8_t USB_Host_GetDeviceStringDescriptor(const uint8_t Index, + void* const Buffer, + const uint8_t BufferLength) +{ + USB_ControlRequest = (USB_Request_Header_t) + { + .bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE), + .bRequest = REQ_GetDescriptor, + .wValue = (DTYPE_String << 8) | Index, + .wIndex = 0, + .wLength = BufferLength, + }; + + Pipe_SelectPipe(PIPE_CONTROLPIPE); + + return USB_Host_SendControlRequest(Buffer); +} + +uint8_t USB_Host_ClearPipeStall(const uint8_t EndpointNum) +{ + USB_ControlRequest = (USB_Request_Header_t) + { + .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_ENDPOINT), + .bRequest = REQ_ClearFeature, + .wValue = FEATURE_SEL_EndpointHalt, + .wIndex = EndpointNum, + .wLength = 0, + }; + + Pipe_SelectPipe(PIPE_CONTROLPIPE); + + return USB_Host_SendControlRequest(NULL); +} + +#endif + diff --git a/LUFA/Drivers/USB/Core/AVR8/Host.h b/LUFA/Drivers/USB/Core/AVR8/Host.h new file mode 100644 index 000000000..def17ee70 --- /dev/null +++ b/LUFA/Drivers/USB/Core/AVR8/Host.h @@ -0,0 +1,523 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB host mode definitions (AVR8) + * + * This file contains structures, function prototypes and macros related to USB host mode. + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_Host + * \defgroup Group_Host_AVR8 Host Management (AVR8) + * + * USB Host mode related macros and enums. This module contains macros and enums which are used when + * the USB controller is initialized in host mode. + * + * @{ + */ + +#ifndef __USBHOST_AVR8_H__ +#define __USBHOST_AVR8_H__ + + /* Includes: */ + #include "../../../../Common/Common.h" + #include "../StdDescriptors.h" + #include "../Pipe.h" + #include "../USBInterrupt.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** Indicates the fixed USB device address which any attached device is enumerated to when in + * host mode. As only one USB device may be attached to the AVR in host mode at any one time + * and that the address used is not important (other than the fact that it is non-zero), a + * fixed value is specified by the library. + */ + #define USB_HOST_DEVICEADDRESS 1 + + #if !defined(USB_HOST_TIMEOUT_MS) || defined(__DOXYGEN__) + /** Constant for the maximum software timeout period of sent USB control transactions to an attached + * device. If a device fails to respond to a sent control request within this period, the + * library will return a timeout error code. + * + * This value may be overridden in the user project makefile as the value of the + * \ref USB_HOST_TIMEOUT_MS token, and passed to the compiler using the -D switch. + */ + #define USB_HOST_TIMEOUT_MS 1000 + #endif + + #if !defined(HOST_DEVICE_SETTLE_DELAY_MS) || defined(__DOXYGEN__) + /** Constant for the delay in milliseconds after a device is connected before the library + * will start the enumeration process. Some devices require a delay of up to 5 seconds + * after connection before the enumeration process can start or incorrect operation will + * occur. + * + * The default delay value may be overridden in the user project makefile by defining the + * \c HOST_DEVICE_SETTLE_DELAY_MS token to the required delay in milliseconds, and passed to the + * compiler using the -D switch. + */ + #define HOST_DEVICE_SETTLE_DELAY_MS 1000 + #endif + + /* Enums: */ + /** Enum for the various states of the USB Host state machine. Only some states are + * implemented in the LUFA library - other states are left to the user to implement. + * + * For information on each possible USB host state, refer to the USB 2.0 specification. + * Several of the USB host states are broken up further into multiple smaller sub-states, + * so that they can be internally implemented inside the library in an efficient manner. + * + * \see \ref USB_HostState, which stores the current host state machine state. + */ + enum USB_Host_States_t + { + HOST_STATE_WaitForDeviceRemoval = 0, /**< Internally implemented by the library. This state can be + * used by the library to wait until the attached device is + * removed by the user - useful for when an error occurs or + * further communication with the device is not needed. This + * allows for other code to run while the state machine is + * effectively disabled. + */ + HOST_STATE_WaitForDevice = 1, /**< Internally implemented by the library. This state indicates + * that the stack is waiting for an interval to elapse before + * continuing with the next step of the device enumeration + * process. + * + * \note Do not manually change to this state in the user code. + */ + HOST_STATE_Unattached = 2, /**< Internally implemented by the library. This state indicates + * that the host state machine is waiting for a device to be + * attached so that it can start the enumeration process. + * + * \note Do not manually change to this state in the user code. + */ + HOST_STATE_Powered = 3, /**< Internally implemented by the library. This state indicates + * that a device has been attached, and the library's internals + * are being configured to begin the enumeration process. + * + * \note Do not manually change to this state in the user code. + */ + HOST_STATE_Powered_WaitForDeviceSettle = 4, /**< Internally implemented by the library. This state indicates + * that the stack is waiting for the initial settling period to + * elapse before beginning the enumeration process. + * + * \note Do not manually change to this state in the user code. + */ + HOST_STATE_Powered_WaitForConnect = 5, /**< Internally implemented by the library. This state indicates + * that the stack is waiting for a connection event from the USB + * controller to indicate a valid USB device has been attached to + * the bus and is ready to be enumerated. + * + * \note Do not manually change to this state in the user code. + */ + HOST_STATE_Powered_DoReset = 6, /**< Internally implemented by the library. This state indicates + * that a valid USB device has been attached, and that it is + * will now be reset to ensure it is ready for enumeration. + * + * \note Do not manually change to this state in the user code. + */ + HOST_STATE_Powered_ConfigPipe = 7, /**< Internally implemented by the library. This state indicates + * that the attached device is currently powered and reset, and + * that the control pipe is now being configured by the stack. + * + * \note Do not manually change to this state in the user code. + */ + HOST_STATE_Default = 8, /**< Internally implemented by the library. This state indicates + * that the stack is currently retrieving the control endpoint's + * size from the device, so that the control pipe can be altered + * to match. + * + * \note Do not manually change to this state in the user code. + */ + HOST_STATE_Default_PostReset = 9, /**< Internally implemented by the library. This state indicates that + * the control pipe is being reconfigured to match the retrieved + * control endpoint size from the device, and the device's USB bus + * address is being set. + * + * \note Do not manually change to this state in the user code. + */ + HOST_STATE_Default_PostAddressSet = 10, /**< Internally implemented by the library. This state indicates that + * the device's address has now been set, and the stack is has now + * completed the device enumeration process. This state causes the + * stack to change the current USB device address to that set for + * the connected device, before progressing to the user-implemented + * \ref HOST_STATE_Addressed state for further communications. + * + * \note Do not manually change to this state in the user code. + */ + HOST_STATE_Addressed = 11, /**< May be implemented by the user project. This state should + * set the device configuration before progressing to the + * \ref HOST_STATE_Configured state. Other processing (such as the + * retrieval and processing of the device descriptor) should also + * be placed in this state. + */ + HOST_STATE_Configured = 12, /**< May be implemented by the user project. This state should implement the + * actual work performed on the attached device and changed to the + * \ref HOST_STATE_Suspended or \ref HOST_STATE_WaitForDeviceRemoval states as needed. + */ + HOST_STATE_Suspended = 15, /**< May be implemented by the user project. This state should be maintained + * while the bus is suspended, and changed to either the \ref HOST_STATE_Configured + * (after resuming the bus with the USB_Host_ResumeBus() macro) or the + * \ref HOST_STATE_WaitForDeviceRemoval states as needed. + */ + }; + + /** Enum for the error codes for the \ref EVENT_USB_Host_HostError() event. + * + * \see \ref Group_Events for more information on this event. + */ + enum USB_Host_ErrorCodes_t + { + HOST_ERROR_VBusVoltageDip = 0, /**< VBUS voltage dipped to an unacceptable level. This + * error may be the result of an attached device drawing + * too much current from the VBUS line, or due to the + * AVR's power source being unable to supply sufficient + * current. + */ + }; + + /** Enum for the error codes for the \ref EVENT_USB_Host_DeviceEnumerationFailed() event. + * + * \see \ref Group_Events for more information on this event. + */ + enum USB_Host_EnumerationErrorCodes_t + { + HOST_ENUMERROR_NoError = 0, /**< No error occurred. Used internally, this is not a valid + * ErrorCode parameter value for the \ref EVENT_USB_Host_DeviceEnumerationFailed() + * event. + */ + HOST_ENUMERROR_WaitStage = 1, /**< One of the delays between enumeration steps failed + * to complete successfully, due to a timeout or other + * error. + */ + HOST_ENUMERROR_NoDeviceDetected = 2, /**< No device was detected, despite the USB data lines + * indicating the attachment of a device. + */ + HOST_ENUMERROR_ControlError = 3, /**< One of the enumeration control requests failed to + * complete successfully. + */ + HOST_ENUMERROR_PipeConfigError = 4, /**< The default control pipe (address 0) failed to + * configure correctly. + */ + }; + + /* Inline Functions: */ + /** Returns the current USB frame number, when in host mode. Every millisecond the USB bus is active (i.e. not suspended) + * the frame number is incremented by one. + */ + static inline uint16_t USB_Host_GetFrameNumber(void) + { + return UHFNUM; + } + + #if !defined(NO_SOF_EVENTS) + /** Enables the host mode Start Of Frame events. When enabled, this causes the + * \ref EVENT_USB_Host_StartOfFrame() event to fire once per millisecond, synchronized to the USB bus, + * at the start of each USB frame when a device is enumerated while in host mode. + * + * \note Not available when the \c NO_SOF_EVENTS compile time token is defined. + */ + static inline void USB_Host_EnableSOFEvents(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_EnableSOFEvents(void) + { + USB_INT_Enable(USB_INT_HSOFI); + } + + /** Disables the host mode Start Of Frame events. When disabled, this stops the firing of the + * \ref EVENT_USB_Host_StartOfFrame() event when enumerated in host mode. + * + * \note Not available when the NO_SOF_EVENTS compile time token is defined. + */ + static inline void USB_Host_DisableSOFEvents(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_DisableSOFEvents(void) + { + USB_INT_Disable(USB_INT_HSOFI); + } + #endif + + /** Resets the USB bus, including the endpoints in any attached device and pipes on the AVR host. + * USB bus resets leave the default control pipe configured (if already configured). + * + * If the USB bus has been suspended prior to issuing a bus reset, the attached device will be + * woken up automatically and the bus resumed after the reset has been correctly issued. + */ + static inline void USB_Host_ResetBus(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_ResetBus(void) + { + UHCON |= (1 << RESET); + } + + /** Determines if a previously issued bus reset (via the \ref USB_Host_ResetBus() macro) has + * completed. + * + * \return Boolean \c true if no bus reset is currently being sent, \c false otherwise. + */ + static inline bool USB_Host_IsBusResetComplete(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool USB_Host_IsBusResetComplete(void) + { + return ((UHCON & (1 << RESET)) ? false : true); + } + + /** Resumes USB communications with an attached and enumerated device, by resuming the transmission + * of the 1MS Start Of Frame messages to the device. When resumed, USB communications between the + * host and attached device may occur. + */ + static inline void USB_Host_ResumeBus(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_ResumeBus(void) + { + UHCON |= (1 << SOFEN); + } + + /** Suspends the USB bus, preventing any communications from occurring between the host and attached + * device until the bus has been resumed. This stops the transmission of the 1MS Start Of Frame + * messages to the device. + */ + static inline void USB_Host_SuspendBus(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_SuspendBus(void) + { + UHCON &= ~(1 << SOFEN); + } + + /** Determines if the USB bus has been suspended via the use of the \ref USB_Host_SuspendBus() macro, + * false otherwise. While suspended, no USB communications can occur until the bus is resumed, + * except for the Remote Wakeup event from the device if supported. + * + * \return Boolean \c true if the bus is currently suspended, \c false otherwise. + */ + static inline bool USB_Host_IsBusSuspended(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool USB_Host_IsBusSuspended(void) + { + return ((UHCON & (1 << SOFEN)) ? false : true); + } + + /** Determines if the attached device is currently enumerated in Full Speed mode (12Mb/s), or + * false if the attached device is enumerated in Low Speed mode (1.5Mb/s). + * + * \return Boolean \c true if the attached device is enumerated in Full Speed mode, \c false otherwise. + */ + static inline bool USB_Host_IsDeviceFullSpeed(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool USB_Host_IsDeviceFullSpeed(void) + { + return ((USBSTA & (1 << SPEED)) ? true : false); + } + + /** Determines if the attached device is currently issuing a Remote Wakeup request, requesting + * that the host resume the USB bus and wake up the device, false otherwise. + * + * \return Boolean \c true if the attached device has sent a Remote Wakeup request, \c false otherwise. + */ + static inline bool USB_Host_IsRemoteWakeupSent(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool USB_Host_IsRemoteWakeupSent(void) + { + return ((UHINT & (1 << RXRSMI)) ? true : false); + } + + /** Clears the flag indicating that a Remote Wakeup request has been issued by an attached device. */ + static inline void USB_Host_ClearRemoteWakeupSent(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_ClearRemoteWakeupSent(void) + { + UHINT &= ~(1 << RXRSMI); + } + + /** Accepts a Remote Wakeup request from an attached device. This must be issued in response to + * a device's Remote Wakeup request within 2ms for the request to be accepted and the bus to + * be resumed. + */ + static inline void USB_Host_ResumeFromWakeupRequest(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_ResumeFromWakeupRequest(void) + { + UHCON |= (1 << RESUME); + } + + /** Determines if a resume from Remote Wakeup request is currently being sent to an attached + * device. + * + * \return Boolean \c true if no resume request is currently being sent, \c false otherwise. + */ + static inline bool USB_Host_IsResumeFromWakeupRequestSent(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool USB_Host_IsResumeFromWakeupRequestSent(void) + { + return ((UHCON & (1 << RESUME)) ? false : true); + } + + /* Function Prototypes: */ + /** Convenience function. This routine sends a SET CONFIGURATION standard request to the attached + * device, with the given configuration index. This can be used to easily set the device + * configuration without creating and sending the request manually. + * + * \note After this routine returns, the control pipe will be selected. + * + * \param[in] ConfigNumber Configuration index to send to the device. + * + * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum to indicate the result. + */ + uint8_t USB_Host_SetDeviceConfiguration(const uint8_t ConfigNumber); + + /** Convenience function. This routine sends a GET DESCRIPTOR standard request to the attached + * device, requesting the device descriptor. This can be used to easily retrieve information + * about the device such as its VID, PID and power requirements. + * + * \note After this routine returns, the control pipe will be selected. + * + * \param[out] DeviceDescriptorPtr Pointer to the destination device descriptor structure where + * the read data is to be stored. + * + * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum to indicate the result. + */ + uint8_t USB_Host_GetDeviceDescriptor(void* const DeviceDescriptorPtr); + + /** Convenience function. This routine sends a GET DESCRIPTOR standard request to the attached + * device, requesting the string descriptor of the specified index. This can be used to easily + * retrieve string descriptors from the device by index, after the index is obtained from the + * Device or Configuration descriptors. + * + * \note After this routine returns, the control pipe will be selected. + * + * \param[in] Index Index of the string index to retrieve. + * \param[out] Buffer Pointer to the destination buffer where the retrieved string descriptor is + * to be stored. + * \param[in] BufferLength Maximum size of the string descriptor which can be stored into the buffer. + * + * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum to indicate the result. + */ + uint8_t USB_Host_GetDeviceStringDescriptor(const uint8_t Index, + void* const Buffer, + const uint8_t BufferLength); + + /** Clears a stall condition on the given pipe, via a CLEAR FEATURE standard request to the attached device. + * + * \note After this routine returns, the control pipe will be selected. + * + * \param[in] EndpointIndex Index of the endpoint to clear, including the endpoint's direction. + * + * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum to indicate the result. + */ + uint8_t USB_Host_ClearPipeStall(const uint8_t EndpointIndex); + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Macros: */ + static inline void USB_Host_HostMode_On(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_HostMode_On(void) + { + USBCON |= (1 << HOST); + } + + static inline void USB_Host_HostMode_Off(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_HostMode_Off(void) + { + USBCON &= ~(1 << HOST); + } + + static inline void USB_Host_VBUS_Auto_Enable(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_VBUS_Auto_Enable(void) + { + OTGCON &= ~(1 << VBUSHWC); + UHWCON |= (1 << UVCONE); + } + + static inline void USB_Host_VBUS_Manual_Enable(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_VBUS_Manual_Enable(void) + { + OTGCON |= (1 << VBUSHWC); + UHWCON &= ~(1 << UVCONE); + + DDRE |= (1 << 7); + } + + static inline void USB_Host_VBUS_Auto_On(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_VBUS_Auto_On(void) + { + OTGCON |= (1 << VBUSREQ); + } + + static inline void USB_Host_VBUS_Manual_On(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_VBUS_Manual_On(void) + { + PORTE |= (1 << 7); + } + + static inline void USB_Host_VBUS_Auto_Off(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_VBUS_Auto_Off(void) + { + OTGCON |= (1 << VBUSRQC); + } + + static inline void USB_Host_VBUS_Manual_Off(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_VBUS_Manual_Off(void) + { + PORTE &= ~(1 << 7); + } + + static inline void USB_Host_SetDeviceAddress(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void USB_Host_SetDeviceAddress(const uint8_t Address) + { + UHADDR = (Address & 0x7F); + } + + /* Enums: */ + enum USB_Host_WaitMSErrorCodes_t + { + HOST_WAITERROR_Successful = 0, + HOST_WAITERROR_DeviceDisconnect = 1, + HOST_WAITERROR_PipeError = 2, + HOST_WAITERROR_SetupStalled = 3, + }; + + /* Function Prototypes: */ + void USB_Host_ProcessNextHostState(void); + uint8_t USB_Host_WaitMS(uint8_t MS); + + #if defined(__INCLUDE_FROM_HOST_C) + static void USB_Host_ResetDevice(void); + #endif + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/LUFA/Drivers/USB/Core/AVR8/OTG.h b/LUFA/Drivers/USB/Core/AVR8/OTG.h new file mode 100644 index 000000000..cc0cc3da1 --- /dev/null +++ b/LUFA/Drivers/USB/Core/AVR8/OTG.h @@ -0,0 +1,152 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB OTG mode definitions (AVR8) + * + * This file contains structures, function prototypes and macros related to USB OTG mode, where two USB devices + * may be linked directly together and exchange host/device roles as needed. + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_OTG + * \defgroup Group_OTG_AVR8 USB On The Go (OTG) Management (AVR8) + * + * This module contains macros for embedded USB hosts with dual role On The Go capabilities, for managing role + * exchange. OTG is a way for two USB dual role devices to talk to one another directly without fixed device/host + * roles. + * + * @{ + */ + +#ifndef __USBOTG_AVR8_H__ +#define __USBOTG_AVR8_H__ + + /* Includes: */ + #include "../../../../Common/Common.h" + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** Mask for the VBUS pulsing method of SRP, supported by some OTG devices. + * + * \see \ref USB_OTG_Device_InitiateSRP(). + */ + #define USB_OTG_SRP_VBUS (1 << SRPSEL) + + /** Mask for the Data + pulsing method of SRP, supported by some OTG devices. + * + * \see \ref USB_OTG_Device_InitiateSRP(). + */ + #define USB_OTG_STP_DATA 0 + + /* Inline Functions: */ + /** Initiate a Host Negotiation Protocol request. This indicates to the other connected device + * that the device wishes to change device/host roles. + */ + static inline void USB_OTG_Device_RequestHNP(void) ATTR_ALWAYS_INLINE; + static inline void USB_OTG_Device_RequestHNP(void) + { + OTGCON |= (1 << HNPREQ); + } + + /** Cancel a Host Negotiation Protocol request. This stops a pending HNP request to the other + * connected device. + */ + static inline void USB_OTG_Device_CancelHNPRequest(void) ATTR_ALWAYS_INLINE; + static inline void USB_OTG_Device_CancelHNPRequest(void) + { + OTGCON &= ~(1 << HNPREQ); + } + + /** Determines if the device is currently sending a HNP to an attached host. + * + * \return Boolean \c true if currently sending a HNP to the other connected device, \c false otherwise + */ + static inline bool USB_OTG_Device_IsSendingHNP(void) ATTR_ALWAYS_INLINE; + static inline bool USB_OTG_Device_IsSendingHNP(void) + { + return ((OTGCON & (1 << HNPREQ)) ? true : false); + } + + /** Initiates a Session Request Protocol request. Most OTG devices turn off VBUS when the USB + * interface is not in use, to conserve power. Sending a SRP to a USB OTG device running in + * host mode indicates that VBUS should be applied and a session started. + * + * There are two different methods of sending a SRP - either pulses on the VBUS line, or by + * pulsing the Data + line via the internal pull-up resistor. + * + * \param[in] SRPTypeMask Mask indicating the type of SRP to use, either \ref USB_OTG_SRP_VBUS or + * \ref USB_OTG_STP_DATA. + */ + static inline void USB_OTG_Device_InitiateSRP(const uint8_t SRPTypeMask) ATTR_ALWAYS_INLINE; + static inline void USB_OTG_Device_InitiateSRP(const uint8_t SRPTypeMask) + { + OTGCON = ((OTGCON & ~(1 << SRPSEL)) | (SRPTypeMask | (1 << SRPREQ))); + } + + /** Accepts a HNP from a connected device, indicating that both devices should exchange + * device/host roles. + */ + static inline void USB_OTG_Host_AcceptHNP(void) ATTR_ALWAYS_INLINE; + static inline void USB_OTG_Host_AcceptHNP(void) + { + OTGCON |= (1 << HNPREQ); + } + + /** Rejects a HNP from a connected device, indicating that both devices should remain in their + * current device/host roles. + */ + static inline void USB_OTG_Host_RejectHNP(void) ATTR_ALWAYS_INLINE; + static inline void USB_OTG_Host_RejectHNP(void) + { + OTGCON &= ~(1 << HNPREQ); + } + + /** Indicates if the connected device is not currently sending a HNP request. + * + * \return Boolean \c true if a HNP is currently being issued by the connected device, \c false otherwise. + */ + static inline bool USB_OTG_Host_IsHNPReceived(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool USB_OTG_Host_IsHNPReceived(void) + { + return ((OTGCON & (1 << HNPREQ)) ? true : false); + } + +#endif + +/** @} */ + diff --git a/LUFA/Drivers/USB/Core/AVR8/Pipe.c b/LUFA/Drivers/USB/Core/AVR8/Pipe.c new file mode 100644 index 000000000..11751321c --- /dev/null +++ b/LUFA/Drivers/USB/Core/AVR8/Pipe.c @@ -0,0 +1,193 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#define __INCLUDE_FROM_USB_DRIVER +#include "../USBMode.h" + +#if defined(USB_CAN_BE_HOST) + +#include "Pipe.h" + +uint8_t USB_ControlPipeSize = PIPE_CONTROLPIPE_DEFAULT_SIZE; + +bool Pipe_ConfigurePipe(const uint8_t Number, + const uint8_t Type, + const uint8_t Token, + const uint8_t EndpointNumber, + const uint16_t Size, + const uint8_t Banks) +{ +#if defined(ORDERED_EP_CONFIG) + Pipe_SelectPipe(Number); + Pipe_EnablePipe(); + + UPCFG1X = 0; + + UPCFG0X = ((Type << EPTYPE0) | Token | ((EndpointNumber & PIPE_EPNUM_MASK) << PEPNUM0)); + UPCFG1X = ((1 << ALLOC) | Banks | Pipe_BytesToEPSizeMask(Size)); + + Pipe_SetInfiniteINRequests(); + + return Pipe_IsConfigured(); +#else + for (uint8_t PNum = Number; PNum < PIPE_TOTAL_PIPES; PNum++) + { + uint8_t UPCFG0XTemp; + uint8_t UPCFG1XTemp; + uint8_t UPCFG2XTemp; + uint8_t UPCONXTemp; + uint8_t UPINRQXTemp; + uint8_t UPIENXTemp; + + Pipe_SelectPipe(PNum); + + if (PNum == Number) + { + UPCFG0XTemp = ((Type << EPTYPE0) | Token | ((EndpointNumber & PIPE_EPNUM_MASK) << PEPNUM0)); + UPCFG1XTemp = ((1 << ALLOC) | Banks | Pipe_BytesToEPSizeMask(Size)); + UPCFG2XTemp = 0; + UPCONXTemp = ((1 << PEN) | (1 << INMODE)); + UPINRQXTemp = 0; + UPIENXTemp = 0; + } + else + { + UPCFG0XTemp = UPCFG0X; + UPCFG1XTemp = UPCFG1X; + UPCFG2XTemp = UPCFG2X; + UPCONXTemp = UPCONX; + UPINRQXTemp = UPINRQX; + UPIENXTemp = UPIENX; + } + + if (!(UPCFG1XTemp & (1 << ALLOC))) + continue; + + Pipe_DisablePipe(); + UPCFG1X &= (1 << ALLOC); + + Pipe_EnablePipe(); + UPCFG0X = UPCFG0XTemp; + UPCFG1X = UPCFG1XTemp; + UPCFG2X = UPCFG2XTemp; + UPCONX = UPCONXTemp; + UPINRQX = UPINRQXTemp; + UPIENX = UPIENXTemp; + + if (!(Pipe_IsConfigured())) + return false; + } + + Pipe_SelectPipe(Number); + return true; +#endif +} + +void Pipe_ClearPipes(void) +{ + UPINT = 0; + + for (uint8_t PNum = 0; PNum < PIPE_TOTAL_PIPES; PNum++) + { + Pipe_SelectPipe(PNum); + UPIENX = 0; + UPINTX = 0; + UPCFG1X = 0; + Pipe_DisablePipe(); + } +} + +bool Pipe_IsEndpointBound(const uint8_t EndpointAddress) +{ + uint8_t PrevPipeNumber = Pipe_GetCurrentPipe(); + + for (uint8_t PNum = 0; PNum < PIPE_TOTAL_PIPES; PNum++) + { + Pipe_SelectPipe(PNum); + + if (!(Pipe_IsConfigured())) + continue; + + uint8_t PipeToken = Pipe_GetPipeToken(); + bool PipeTokenCorrect = true; + + if (PipeToken != PIPE_TOKEN_SETUP) + PipeTokenCorrect = (PipeToken == ((EndpointAddress & PIPE_EPDIR_MASK) ? PIPE_TOKEN_IN : PIPE_TOKEN_OUT)); + + if (PipeTokenCorrect && (Pipe_BoundEndpointNumber() == (EndpointAddress & PIPE_EPNUM_MASK))) + return true; + } + + Pipe_SelectPipe(PrevPipeNumber); + return false; +} + +uint8_t Pipe_WaitUntilReady(void) +{ + #if (USB_STREAM_TIMEOUT_MS < 0xFF) + uint8_t TimeoutMSRem = USB_STREAM_TIMEOUT_MS; + #else + uint16_t TimeoutMSRem = USB_STREAM_TIMEOUT_MS; + #endif + + uint16_t PreviousFrameNumber = USB_Host_GetFrameNumber(); + + for (;;) + { + if (Pipe_GetPipeToken() == PIPE_TOKEN_IN) + { + if (Pipe_IsINReceived()) + return PIPE_READYWAIT_NoError; + } + else + { + if (Pipe_IsOUTReady()) + return PIPE_READYWAIT_NoError; + } + + if (Pipe_IsStalled()) + return PIPE_READYWAIT_PipeStalled; + else if (USB_HostState == HOST_STATE_Unattached) + return PIPE_READYWAIT_DeviceDisconnected; + + uint16_t CurrentFrameNumber = USB_Host_GetFrameNumber(); + + if (CurrentFrameNumber != PreviousFrameNumber) + { + PreviousFrameNumber = CurrentFrameNumber; + + if (!(TimeoutMSRem--)) + return PIPE_READYWAIT_Timeout; + } + } +} + +#endif + diff --git a/LUFA/Drivers/USB/Core/AVR8/Pipe.h b/LUFA/Drivers/USB/Core/AVR8/Pipe.h new file mode 100644 index 000000000..3f62ec5d1 --- /dev/null +++ b/LUFA/Drivers/USB/Core/AVR8/Pipe.h @@ -0,0 +1,940 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB host pipe management definitions. + * + * This file contains structures, function prototypes and macros related to the management of the device's + * data pipes when the library is initialized in USB host mode. + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_PipeRW + * \defgroup Group_PipeRW_AVR8 Pipe Data Reading and Writing (AVR8) + * + * Functions, macros, variables, enums and types related to data reading and writing from and to pipes. + */ + +/** \ingroup Group_PipePrimitiveRW + * \defgroup Group_PipePrimitiveRW_AVR8 Read/Write of Primitive Data Types (AVR8) + * + * Functions, macros, variables, enums and types related to data reading and writing of primitive data types + * from and to pipes. + */ + +/** \ingroup Group_PipePacketManagement + * \defgroup Group_PipePacketManagement_AVR8 Pipe Packet Management (AVR8) + * + * Functions, macros, variables, enums and types related to packet management of pipes. + */ + +/** \ingroup Group_PipeControlReq + * \defgroup Group_PipeControlReq_AVR8 Pipe Control Request Management (AVR8) + * + * Module for host mode request processing. This module allows for the transmission of standard, class and + * vendor control requests to the default control endpoint of an attached device while in host mode. + * + * \see Chapter 9 of the USB 2.0 specification. + */ + +/** \ingroup Group_PipeManagement + * \defgroup Group_PipeManagement_AVR8 Pipe Management (AVR8) + * + * This module contains functions, macros and enums related to pipe management when in USB Host mode. This + * module contains the pipe management macros, as well as pipe interrupt and data send/receive functions + * for various data types. + * + * @{ + */ + +#ifndef __PIPE_AVR8_H__ +#define __PIPE_AVR8_H__ + + /* Includes: */ + #include "../../../../Common/Common.h" + #include "../USBTask.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** \name Pipe Error Flag Masks */ + //@{ + /** Mask for \ref Pipe_GetErrorFlags(), indicating that an overflow error occurred in the pipe on the received data. */ + #define PIPE_ERRORFLAG_OVERFLOW (1 << 6) + + /** Mask for \ref Pipe_GetErrorFlags(), indicating that an underflow error occurred in the pipe on the received data. */ + #define PIPE_ERRORFLAG_UNDERFLOW (1 << 5) + + /** Mask for \ref Pipe_GetErrorFlags(), indicating that a CRC error occurred in the pipe on the received data. */ + #define PIPE_ERRORFLAG_CRC16 (1 << 4) + + /** Mask for \ref Pipe_GetErrorFlags(), indicating that a hardware timeout error occurred in the pipe. */ + #define PIPE_ERRORFLAG_TIMEOUT (1 << 3) + + /** Mask for \ref Pipe_GetErrorFlags(), indicating that a hardware PID error occurred in the pipe. */ + #define PIPE_ERRORFLAG_PID (1 << 2) + + /** Mask for \ref Pipe_GetErrorFlags(), indicating that a hardware data PID error occurred in the pipe. */ + #define PIPE_ERRORFLAG_DATAPID (1 << 1) + + /** Mask for \ref Pipe_GetErrorFlags(), indicating that a hardware data toggle error occurred in the pipe. */ + #define PIPE_ERRORFLAG_DATATGL (1 << 0) + //@} + + /** \name Pipe Token Masks */ + //@{ + /** Token mask for \ref Pipe_ConfigurePipe(). This sets the pipe as a SETUP token (for CONTROL type pipes), + * which will trigger a control request on the attached device when data is written to the pipe. + */ + #define PIPE_TOKEN_SETUP (0 << PTOKEN0) + + /** Token mask for \ref Pipe_ConfigurePipe(). This sets the pipe as a IN token (for non-CONTROL type pipes), + * indicating that the pipe data will flow from device to host. + */ + #define PIPE_TOKEN_IN (1 << PTOKEN0) + + /** Token mask for \ref Pipe_ConfigurePipe(). This sets the pipe as a OUT token (for non-CONTROL type pipes), + * indicating that the pipe data will flow from host to device. + */ + #define PIPE_TOKEN_OUT (2 << PTOKEN0) + //@} + + /** \name Pipe Bank Mode Masks */ + //@{ + /** Mask for the bank mode selection for the \ref Pipe_ConfigurePipe() macro. This indicates that the pipe + * should have one single bank, which requires less USB FIFO memory but results in slower transfers as + * only one USB device (the AVR or the attached device) can access the pipe's bank at the one time. + */ + #define PIPE_BANK_SINGLE (0 << EPBK0) + + /** Mask for the bank mode selection for the \ref Pipe_ConfigurePipe() macro. This indicates that the pipe + * should have two banks, which requires more USB FIFO memory but results in faster transfers as one + * USB device (the AVR or the attached device) can access one bank while the other accesses the second + * bank. + */ + #define PIPE_BANK_DOUBLE (1 << EPBK0) + //@} + + /** Pipe address for the default control pipe, which always resides in address 0. This is + * defined for convenience to give more readable code when used with the pipe macros. + */ + #define PIPE_CONTROLPIPE 0 + + /** Default size of the default control pipe's bank, until altered by the Endpoint0Size value + * in the device descriptor of the attached device. + */ + #define PIPE_CONTROLPIPE_DEFAULT_SIZE 64 + + /** Pipe number mask, for masking against pipe addresses to retrieve the pipe's numerical address + * in the device. + */ + #define PIPE_PIPENUM_MASK 0x07 + + /** Total number of pipes (including the default control pipe at address 0) which may be used in + * the device. Different USB AVR models support different amounts of pipes, this value reflects + * the maximum number of pipes for the currently selected AVR model. + */ + #define PIPE_TOTAL_PIPES 7 + + /** Size in bytes of the largest pipe bank size possible in the device. Not all banks on each AVR + * model supports the largest bank size possible on the device; different pipe numbers support + * different maximum bank sizes. This value reflects the largest possible bank of any pipe on the + * currently selected USB AVR model. + */ + #define PIPE_MAX_SIZE 256 + + /** Endpoint number mask, for masking against endpoint addresses to retrieve the endpoint's + * numerical address in the attached device. + */ + #define PIPE_EPNUM_MASK 0x0F + + /** Endpoint direction mask, for masking against endpoint addresses to retrieve the endpoint's + * direction for comparing with the \c ENDPOINT_DESCRIPTOR_DIR_* masks. + */ + #define PIPE_EPDIR_MASK 0x80 + + /* Enums: */ + /** Enum for the possible error return codes of the \ref Pipe_WaitUntilReady() function. + * + * \ingroup Group_PipeRW_AVR8 + */ + enum Pipe_WaitUntilReady_ErrorCodes_t + { + PIPE_READYWAIT_NoError = 0, /**< Pipe ready for next packet, no error. */ + PIPE_READYWAIT_PipeStalled = 1, /**< The device stalled the pipe while waiting. */ + PIPE_READYWAIT_DeviceDisconnected = 2, /**< Device was disconnected from the host while waiting. */ + PIPE_READYWAIT_Timeout = 3, /**< The device failed to accept or send the next packet + * within the software timeout period set by the + * \ref USB_STREAM_TIMEOUT_MS macro. + */ + }; + + /* Inline Functions: */ + /** Indicates the number of bytes currently stored in the current pipes's selected bank. + * + * \note The return width of this function may differ, depending on the maximum pipe bank size + * of the selected AVR model. + * + * \ingroup Group_PipeRW_AVR8 + * + * \return Total number of bytes in the currently selected pipe's FIFO buffer. + */ + static inline uint16_t Pipe_BytesInPipe(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint16_t Pipe_BytesInPipe(void) + { + return UPBCX; + } + + /** Returns the pipe address of the currently selected pipe. This is typically used to save the + * currently selected pipe number so that it can be restored after another pipe has been manipulated. + * + * \return Index of the currently selected pipe. + */ + static inline uint8_t Pipe_GetCurrentPipe(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Pipe_GetCurrentPipe(void) + { + return (UPNUM & PIPE_PIPENUM_MASK); + } + + /** Selects the given pipe number. Any pipe operations which do not require the pipe number to be + * indicated will operate on the currently selected pipe. + * + * \param[in] PipeNumber Index of the pipe to select. + */ + static inline void Pipe_SelectPipe(const uint8_t PipeNumber) ATTR_ALWAYS_INLINE; + static inline void Pipe_SelectPipe(const uint8_t PipeNumber) + { + UPNUM = PipeNumber; + } + + /** Resets the desired pipe, including the pipe banks and flags. + * + * \param[in] PipeNumber Index of the pipe to reset. + */ + static inline void Pipe_ResetPipe(const uint8_t PipeNumber) ATTR_ALWAYS_INLINE; + static inline void Pipe_ResetPipe(const uint8_t PipeNumber) + { + UPRST = (1 << PipeNumber); + UPRST = 0; + } + + /** Enables the currently selected pipe so that data can be sent and received through it to and from + * an attached device. + * + * \pre The currently selected pipe must first be configured properly via \ref Pipe_ConfigurePipe(). + */ + static inline void Pipe_EnablePipe(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_EnablePipe(void) + { + UPCONX |= (1 << PEN); + } + + /** Disables the currently selected pipe so that data cannot be sent and received through it to and + * from an attached device. + */ + static inline void Pipe_DisablePipe(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_DisablePipe(void) + { + UPCONX &= ~(1 << PEN); + } + + /** Determines if the currently selected pipe is enabled, but not necessarily configured. + * + * \return Boolean \c true if the currently selected pipe is enabled, \c false otherwise. + */ + static inline bool Pipe_IsEnabled(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_IsEnabled(void) + { + return ((UPCONX & (1 << PEN)) ? true : false); + } + + /** Gets the current pipe token, indicating the pipe's data direction and type. + * + * \return The current pipe token, as a \c PIPE_TOKEN_* mask. + */ + static inline uint8_t Pipe_GetPipeToken(void) ATTR_ALWAYS_INLINE; + static inline uint8_t Pipe_GetPipeToken(void) + { + return (UPCFG0X & (0x03 << PTOKEN0)); + } + + /** Sets the token for the currently selected pipe to one of the tokens specified by the \c PIPE_TOKEN_* + * masks. This can be used on CONTROL type pipes, to allow for bidirectional transfer of data during + * control requests, or on regular pipes to allow for half-duplex bidirectional data transfer to devices + * which have two endpoints of opposite direction sharing the same endpoint address within the device. + * + * \param[in] Token New pipe token to set the selected pipe to, as a \c PIPE_TOKEN_* mask. + */ + static inline void Pipe_SetPipeToken(const uint8_t Token) ATTR_ALWAYS_INLINE; + static inline void Pipe_SetPipeToken(const uint8_t Token) + { + UPCFG0X = ((UPCFG0X & ~(0x03 << PTOKEN0)) | Token); + } + + /** Configures the currently selected pipe to allow for an unlimited number of IN requests. */ + static inline void Pipe_SetInfiniteINRequests(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_SetInfiniteINRequests(void) + { + UPCONX |= (1 << INMODE); + } + + /** Configures the currently selected pipe to only allow the specified number of IN requests to be + * accepted by the pipe before it is automatically frozen. + * + * \param[in] TotalINRequests Total number of IN requests that the pipe may receive before freezing. + */ + static inline void Pipe_SetFiniteINRequests(const uint8_t TotalINRequests) ATTR_ALWAYS_INLINE; + static inline void Pipe_SetFiniteINRequests(const uint8_t TotalINRequests) + { + UPCONX &= ~(1 << INMODE); + UPINRQX = TotalINRequests; + } + + /** Determines if the currently selected pipe is configured. + * + * \return Boolean \c true if the selected pipe is configured, \c false otherwise. + */ + static inline bool Pipe_IsConfigured(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_IsConfigured(void) + { + return ((UPSTAX & (1 << CFGOK)) ? true : false); + } + + /** Retrieves the endpoint number of the endpoint within the attached device that the currently selected + * pipe is bound to. + * + * \return Endpoint number the currently selected pipe is bound to. + */ + static inline uint8_t Pipe_BoundEndpointNumber(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Pipe_BoundEndpointNumber(void) + { + return ((UPCFG0X >> PEPNUM0) & PIPE_EPNUM_MASK); + } + + /** Sets the period between interrupts for an INTERRUPT type pipe to a specified number of milliseconds. + * + * \param[in] Milliseconds Number of milliseconds between each pipe poll. + */ + static inline void Pipe_SetInterruptPeriod(const uint8_t Milliseconds) ATTR_ALWAYS_INLINE; + static inline void Pipe_SetInterruptPeriod(const uint8_t Milliseconds) + { + UPCFG2X = Milliseconds; + } + + /** Returns a mask indicating which pipe's interrupt periods have elapsed, indicating that the pipe should + * be serviced. + * + * \return Mask whose bits indicate which pipes have interrupted. + */ + static inline uint8_t Pipe_GetPipeInterrupts(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Pipe_GetPipeInterrupts(void) + { + return UPINT; + } + + /** Determines if the specified pipe number has interrupted (valid only for INTERRUPT type + * pipes). + * + * \param[in] PipeNumber Index of the pipe whose interrupt flag should be tested. + * + * \return Boolean \c true if the specified pipe has interrupted, \c false otherwise. + */ + static inline bool Pipe_HasPipeInterrupted(const uint8_t PipeNumber) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_HasPipeInterrupted(const uint8_t PipeNumber) + { + return ((UPINT & (1 << PipeNumber)) ? true : false); + } + + /** Unfreezes the selected pipe, allowing it to communicate with an attached device. */ + static inline void Pipe_Unfreeze(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_Unfreeze(void) + { + UPCONX &= ~(1 << PFREEZE); + } + + /** Freezes the selected pipe, preventing it from communicating with an attached device. */ + static inline void Pipe_Freeze(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_Freeze(void) + { + UPCONX |= (1 << PFREEZE); + } + + /** Determines if the currently selected pipe is frozen, and not able to accept data. + * + * \return Boolean \c true if the currently selected pipe is frozen, \c false otherwise. + */ + static inline bool Pipe_IsFrozen(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_IsFrozen(void) + { + return ((UPCONX & (1 << PFREEZE)) ? true : false); + } + + /** Clears the master pipe error flag. */ + static inline void Pipe_ClearError(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_ClearError(void) + { + UPINTX &= ~(1 << PERRI); + } + + /** Determines if the master pipe error flag is set for the currently selected pipe, indicating that + * some sort of hardware error has occurred on the pipe. + * + * \see \ref Pipe_GetErrorFlags() macro for information on retrieving the exact error flag. + * + * \return Boolean \c true if an error has occurred on the selected pipe, \c false otherwise. + */ + static inline bool Pipe_IsError(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_IsError(void) + { + return ((UPINTX & (1 << PERRI)) ? true : false); + } + + /** Clears all the currently selected pipe's hardware error flags, but does not clear the master error + * flag for the pipe. + */ + static inline void Pipe_ClearErrorFlags(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_ClearErrorFlags(void) + { + UPERRX = 0; + } + + /** Gets a mask of the hardware error flags which have occurred on the currently selected pipe. This + * value can then be masked against the \c PIPE_ERRORFLAG_* masks to determine what error has occurred. + * + * \return Mask comprising of \c PIPE_ERRORFLAG_* bits indicating what error has occurred on the selected pipe. + */ + static inline uint8_t Pipe_GetErrorFlags(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Pipe_GetErrorFlags(void) + { + return ((UPERRX & (PIPE_ERRORFLAG_CRC16 | PIPE_ERRORFLAG_TIMEOUT | + PIPE_ERRORFLAG_PID | PIPE_ERRORFLAG_DATAPID | + PIPE_ERRORFLAG_DATATGL)) | + (UPSTAX & (PIPE_ERRORFLAG_OVERFLOW | PIPE_ERRORFLAG_UNDERFLOW))); + } + + /** Retrieves the number of busy banks in the currently selected pipe, which have been queued for + * transmission via the \ref Pipe_ClearOUT() command, or are awaiting acknowledgement via the + * \ref Pipe_ClearIN() command. + * + * \ingroup Group_PipePacketManagement_AVR8 + * + * \return Total number of busy banks in the selected pipe. + */ + static inline uint8_t Pipe_GetBusyBanks(void) + { + return (UPSTAX & (0x03 << NBUSYBK0)); + } + + /** Determines if the currently selected pipe may be read from (if data is waiting in the pipe + * bank and the pipe is an IN direction, or if the bank is not yet full if the pipe is an OUT + * direction). This function will return false if an error has occurred in the pipe, or if the pipe + * is an IN direction and no packet (or an empty packet) has been received, or if the pipe is an OUT + * direction and the pipe bank is full. + * + * \note This function is not valid on CONTROL type pipes. + * + * \ingroup Group_PipePacketManagement_AVR8 + * + * \return Boolean \c true if the currently selected pipe may be read from or written to, depending + * on its direction. + */ + static inline bool Pipe_IsReadWriteAllowed(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_IsReadWriteAllowed(void) + { + return ((UPINTX & (1 << RWAL)) ? true : false); + } + + /** Determines if a packet has been received on the currently selected IN pipe from the attached device. + * + * \ingroup Group_PipePacketManagement_AVR8 + * + * \return Boolean \c true if the current pipe has received an IN packet, \c false otherwise. + */ + static inline bool Pipe_IsINReceived(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_IsINReceived(void) + { + return ((UPINTX & (1 << RXINI)) ? true : false); + } + + /** Determines if the currently selected OUT pipe is ready to send an OUT packet to the attached device. + * + * \ingroup Group_PipePacketManagement_AVR8 + * + * \return Boolean \c true if the current pipe is ready for an OUT packet, \c false otherwise. + */ + static inline bool Pipe_IsOUTReady(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_IsOUTReady(void) + { + return ((UPINTX & (1 << TXOUTI)) ? true : false); + } + + /** Determines if no SETUP request is currently being sent to the attached device on the selected + * CONTROL type pipe. + * + * \ingroup Group_PipePacketManagement_AVR8 + * + * \return Boolean \c true if the current pipe is ready for a SETUP packet, \c false otherwise. + */ + static inline bool Pipe_IsSETUPSent(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_IsSETUPSent(void) + { + return ((UPINTX & (1 << TXSTPI)) ? true : false); + } + + /** Sends the currently selected CONTROL type pipe's contents to the device as a SETUP packet. + * + * \ingroup Group_PipePacketManagement_AVR8 + */ + static inline void Pipe_ClearSETUP(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_ClearSETUP(void) + { + UPINTX &= ~((1 << TXSTPI) | (1 << FIFOCON)); + } + + /** Acknowledges the reception of a setup IN request from the attached device on the currently selected + * pipe, freeing the bank ready for the next packet. + * + * \ingroup Group_PipePacketManagement_AVR8 + */ + static inline void Pipe_ClearIN(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_ClearIN(void) + { + UPINTX &= ~((1 << RXINI) | (1 << FIFOCON)); + } + + /** Sends the currently selected pipe's contents to the device as an OUT packet on the selected pipe, freeing + * the bank ready for the next packet. + * + * \ingroup Group_PipePacketManagement_AVR8 + */ + static inline void Pipe_ClearOUT(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_ClearOUT(void) + { + UPINTX &= ~((1 << TXOUTI) | (1 << FIFOCON)); + } + + /** Determines if the device sent a NAK (Negative Acknowledge) in response to the last sent packet on + * the currently selected pipe. This occurs when the host sends a packet to the device, but the device + * is not currently ready to handle the packet (i.e. its endpoint banks are full). Once a NAK has been + * received, it must be cleared using \ref Pipe_ClearNAKReceived() before the previous (or any other) packet + * can be re-sent. + * + * \ingroup Group_PipePacketManagement_AVR8 + * + * \return Boolean \c true if an NAK has been received on the current pipe, \c false otherwise. + */ + static inline bool Pipe_IsNAKReceived(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_IsNAKReceived(void) + { + return ((UPINTX & (1 << NAKEDI)) ? true : false); + } + + /** Clears the NAK condition on the currently selected pipe. + * + * \ingroup Group_PipePacketManagement_AVR8 + * + * \see \ref Pipe_IsNAKReceived() for more details. + */ + static inline void Pipe_ClearNAKReceived(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_ClearNAKReceived(void) + { + UPINTX &= ~(1 << NAKEDI); + } + + /** Determines if the currently selected pipe has had the STALL condition set by the attached device. + * + * \ingroup Group_PipePacketManagement_AVR8 + * + * \return Boolean \c true if the current pipe has been stalled by the attached device, \c false otherwise. + */ + static inline bool Pipe_IsStalled(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_IsStalled(void) + { + return ((UPINTX & (1 << RXSTALLI)) ? true : false); + } + + /** Clears the STALL condition detection flag on the currently selected pipe, but does not clear the + * STALL condition itself (this must be done via a ClearFeature control request to the device). + * + * \ingroup Group_PipePacketManagement_AVR8 + */ + static inline void Pipe_ClearStall(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_ClearStall(void) + { + UPINTX &= ~(1 << RXSTALLI); + } + + /** Reads one byte from the currently selected pipe's bank, for OUT direction pipes. + * + * \ingroup Group_PipePrimitiveRW_AVR8 + * + * \return Next byte in the currently selected pipe's FIFO buffer. + */ + static inline uint8_t Pipe_Read_Byte(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Pipe_Read_Byte(void) + { + return UPDATX; + } + + /** Writes one byte from the currently selected pipe's bank, for IN direction pipes. + * + * \ingroup Group_PipePrimitiveRW_AVR8 + * + * \param[in] Byte Next byte to write into the the currently selected pipe's FIFO buffer. + */ + static inline void Pipe_Write_Byte(const uint8_t Byte) ATTR_ALWAYS_INLINE; + static inline void Pipe_Write_Byte(const uint8_t Byte) + { + UPDATX = Byte; + } + + /** Discards one byte from the currently selected pipe's bank, for OUT direction pipes. + * + * \ingroup Group_PipePrimitiveRW_AVR8 + */ + static inline void Pipe_Discard_Byte(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_Discard_Byte(void) + { + uint8_t Dummy; + + Dummy = UPDATX; + } + + /** Reads two bytes from the currently selected pipe's bank in little endian format, for OUT + * direction pipes. + * + * \ingroup Group_PipePrimitiveRW_AVR8 + * + * \return Next word in the currently selected pipe's FIFO buffer. + */ + static inline uint16_t Pipe_Read_Word_LE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint16_t Pipe_Read_Word_LE(void) + { + union + { + uint16_t Word; + uint8_t Bytes[2]; + } Data; + + Data.Bytes[0] = UPDATX; + Data.Bytes[1] = UPDATX; + + return Data.Word; + } + + /** Reads two bytes from the currently selected pipe's bank in big endian format, for OUT + * direction pipes. + * + * \ingroup Group_PipePrimitiveRW_AVR8 + * + * \return Next word in the currently selected pipe's FIFO buffer. + */ + static inline uint16_t Pipe_Read_Word_BE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint16_t Pipe_Read_Word_BE(void) + { + union + { + uint16_t Word; + uint8_t Bytes[2]; + } Data; + + Data.Bytes[1] = UPDATX; + Data.Bytes[0] = UPDATX; + + return Data.Word; + } + + /** Writes two bytes to the currently selected pipe's bank in little endian format, for IN + * direction pipes. + * + * \ingroup Group_PipePrimitiveRW_AVR8 + * + * \param[in] Word Next word to write to the currently selected pipe's FIFO buffer. + */ + static inline void Pipe_Write_Word_LE(const uint16_t Word) ATTR_ALWAYS_INLINE; + static inline void Pipe_Write_Word_LE(const uint16_t Word) + { + UPDATX = (Word & 0xFF); + UPDATX = (Word >> 8); + } + + /** Writes two bytes to the currently selected pipe's bank in big endian format, for IN + * direction pipes. + * + * \ingroup Group_PipePrimitiveRW_AVR8 + * + * \param[in] Word Next word to write to the currently selected pipe's FIFO buffer. + */ + static inline void Pipe_Write_Word_BE(const uint16_t Word) ATTR_ALWAYS_INLINE; + static inline void Pipe_Write_Word_BE(const uint16_t Word) + { + UPDATX = (Word >> 8); + UPDATX = (Word & 0xFF); + } + + /** Discards two bytes from the currently selected pipe's bank, for OUT direction pipes. + * + * \ingroup Group_PipePrimitiveRW_AVR8 + */ + static inline void Pipe_Discard_Word(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_Discard_Word(void) + { + uint8_t Dummy; + + Dummy = UPDATX; + Dummy = UPDATX; + } + + /** Reads four bytes from the currently selected pipe's bank in little endian format, for OUT + * direction pipes. + * + * \ingroup Group_PipePrimitiveRW_AVR8 + * + * \return Next double word in the currently selected pipe's FIFO buffer. + */ + static inline uint32_t Pipe_Read_DWord_LE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint32_t Pipe_Read_DWord_LE(void) + { + union + { + uint32_t DWord; + uint8_t Bytes[4]; + } Data; + + Data.Bytes[0] = UPDATX; + Data.Bytes[1] = UPDATX; + Data.Bytes[2] = UPDATX; + Data.Bytes[3] = UPDATX; + + return Data.DWord; + } + + /** Reads four bytes from the currently selected pipe's bank in big endian format, for OUT + * direction pipes. + * + * \ingroup Group_PipePrimitiveRW_AVR8 + * + * \return Next double word in the currently selected pipe's FIFO buffer. + */ + static inline uint32_t Pipe_Read_DWord_BE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint32_t Pipe_Read_DWord_BE(void) + { + union + { + uint32_t DWord; + uint8_t Bytes[4]; + } Data; + + Data.Bytes[3] = UPDATX; + Data.Bytes[2] = UPDATX; + Data.Bytes[1] = UPDATX; + Data.Bytes[0] = UPDATX; + + return Data.DWord; + } + + /** Writes four bytes to the currently selected pipe's bank in little endian format, for IN + * direction pipes. + * + * \ingroup Group_PipePrimitiveRW_AVR8 + * + * \param[in] DWord Next double word to write to the currently selected pipe's FIFO buffer. + */ + static inline void Pipe_Write_DWord_LE(const uint32_t DWord) ATTR_ALWAYS_INLINE; + static inline void Pipe_Write_DWord_LE(const uint32_t DWord) + { + UPDATX = (DWord & 0xFF); + UPDATX = (DWord >> 8); + UPDATX = (DWord >> 16); + UPDATX = (DWord >> 24); + } + + /** Writes four bytes to the currently selected pipe's bank in big endian format, for IN + * direction pipes. + * + * \ingroup Group_PipePrimitiveRW_AVR8 + * + * \param[in] DWord Next double word to write to the currently selected pipe's FIFO buffer. + */ + static inline void Pipe_Write_DWord_BE(const uint32_t DWord) ATTR_ALWAYS_INLINE; + static inline void Pipe_Write_DWord_BE(const uint32_t DWord) + { + UPDATX = (DWord >> 24); + UPDATX = (DWord >> 16); + UPDATX = (DWord >> 8); + UPDATX = (DWord & 0xFF); + } + + /** Discards four bytes from the currently selected pipe's bank, for OUT direction pipes. + * + * \ingroup Group_PipePrimitiveRW_AVR8 + */ + static inline void Pipe_Discard_DWord(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_Discard_DWord(void) + { + uint8_t Dummy; + + Dummy = UPDATX; + Dummy = UPDATX; + Dummy = UPDATX; + Dummy = UPDATX; + } + + /* External Variables: */ + /** Global indicating the maximum packet size of the default control pipe located at address + * 0 in the device. This value is set to the value indicated in the attached device's device + * descriptor once the USB interface is initialized into host mode and a device is attached + * to the USB bus. + * + * \note This variable should be treated as read-only in the user application, and never manually + * changed in value. + */ + extern uint8_t USB_ControlPipeSize; + + /* Function Prototypes: */ + /** Configures the specified pipe number with the given pipe type, token, target endpoint number in the + * attached device, bank size and banking mode. + * + * A newly configured pipe is frozen by default, and must be unfrozen before use via the \ref Pipe_Unfreeze() + * before being used. Pipes should be kept frozen unless waiting for data from a device while in IN mode, or + * sending data to the device in OUT mode. IN type pipes are also automatically configured to accept infinite + * numbers of IN requests without automatic freezing - this can be overridden by a call to + * \ref Pipe_SetFiniteINRequests(). + * + * \param[in] Number Pipe number to configure. This must be more than 0 and less than \ref PIPE_TOTAL_PIPES. + * + * \param[in] Type Type of pipe to configure, an \c EP_TYPE_* mask. Not all pipe types are available on Low + * Speed USB devices - refer to the USB 2.0 specification. + * + * \param[in] Token Pipe data token, either \ref PIPE_TOKEN_SETUP, \ref PIPE_TOKEN_OUT or \ref PIPE_TOKEN_IN. + * All pipes (except Control type) are unidirectional - data may only be read from or + * written to the pipe bank based on its direction, not both. + * + * \param[in] EndpointNumber Endpoint index within the attached device that the pipe should interface to. + * + * \param[in] Size Size of the pipe's bank, where packets are stored before they are transmitted to + * the USB device, or after they have been received from the USB device (depending on + * the pipe's data direction). The bank size must indicate the maximum packet size that + * the pipe can handle. + * + * \param[in] Banks Number of banks to use for the pipe being configured, a \c PIPE_BANK_* mask. More banks + * uses more USB DPRAM, but offers better performance. Isochronous type pipes <b>must</b> + * have at least two banks. + * + * \note When the \c ORDERED_EP_CONFIG compile time option is used, Pipes <b>must</b> be configured in ascending order, + * or bank corruption will occur. + * \n\n + * + * \note Certain models of USB AVR's pipes may have different maximum packet sizes based on the pipe's + * index - refer to the chosen USB AVR's datasheet to determine the maximum bank size for each pipe. + * \n\n + * + * \note The default control pipe should not be manually configured by the user application, as it is + * automatically configured by the library internally. + * \n\n + * + * \note This routine will automatically select the specified pipe upon success. Upon failure, the pipe which + * failed to reconfigure correctly will be selected. + * + * \return Boolean \c true if the configuration succeeded, \c false otherwise. + */ + bool Pipe_ConfigurePipe(const uint8_t Number, + const uint8_t Type, + const uint8_t Token, + const uint8_t EndpointNumber, + const uint16_t Size, + const uint8_t Banks); + + /** Spin-loops until the currently selected non-control pipe is ready for the next packed of data to be read + * or written to it, aborting in the case of an error condition (such as a timeout or device disconnect). + * + * \ingroup Group_PipeRW_AVR8 + * + * \return A value from the \ref Pipe_WaitUntilReady_ErrorCodes_t enum. + */ + uint8_t Pipe_WaitUntilReady(void); + + /** Determines if a pipe has been bound to the given device endpoint address. If a pipe which is bound to the given + * endpoint is found, it is automatically selected. + * + * \param[in] EndpointAddress Address and direction mask of the endpoint within the attached device to check. + * + * \return Boolean \c true if a pipe bound to the given endpoint address of the specified direction is found, + * \c false otherwise. + */ + bool Pipe_IsEndpointBound(const uint8_t EndpointAddress); + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Macros: */ + #if !defined(ENDPOINT_CONTROLEP) + #define ENDPOINT_CONTROLEP 0 + #endif + + /* Inline Functions: */ + static inline uint8_t Pipe_BytesToEPSizeMask(const uint16_t Bytes) ATTR_WARN_UNUSED_RESULT ATTR_CONST ATTR_ALWAYS_INLINE; + static inline uint8_t Pipe_BytesToEPSizeMask(const uint16_t Bytes) + { + uint8_t MaskVal = 0; + uint16_t CheckBytes = 8; + + while ((CheckBytes < Bytes) && (CheckBytes < PIPE_MAX_SIZE)) + { + MaskVal++; + CheckBytes <<= 1; + } + + return (MaskVal << EPSIZE0); + } + + /* Function Prototypes: */ + void Pipe_ClearPipes(void); + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/LUFA/Drivers/USB/Core/AVR8/USBController.c b/LUFA/Drivers/USB/Core/AVR8/USBController.c new file mode 100644 index 000000000..f41b5cc11 --- /dev/null +++ b/LUFA/Drivers/USB/Core/AVR8/USBController.c @@ -0,0 +1,233 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#define __INCLUDE_FROM_USB_DRIVER +#define __INCLUDE_FROM_USB_CONTROLLER_C +#include "USBController.h" + +#if (!defined(USB_HOST_ONLY) && !defined(USB_DEVICE_ONLY)) +volatile uint8_t USB_CurrentMode = USB_MODE_None; +#endif + +#if !defined(USE_STATIC_OPTIONS) +volatile uint8_t USB_Options; +#endif + +void USB_Init( + #if defined(USB_CAN_BE_BOTH) + const uint8_t Mode + #endif + + #if (defined(USB_CAN_BE_BOTH) && !defined(USE_STATIC_OPTIONS)) + , + #elif (!defined(USB_CAN_BE_BOTH) && defined(USE_STATIC_OPTIONS)) + void + #endif + + #if !defined(USE_STATIC_OPTIONS) + const uint8_t Options + #endif + ) +{ + #if !defined(USE_STATIC_OPTIONS) + USB_Options = Options; + #endif + + if (!(USB_Options & USB_OPT_REG_DISABLED)) + USB_REG_On(); + else + USB_REG_Off(); + + #if defined(USB_CAN_BE_BOTH) + if (Mode == USB_MODE_UID) + { + UHWCON |= (1 << UIDE); + USB_INT_Enable(USB_INT_IDTI); + USB_CurrentMode = USB_GetUSBModeFromUID(); + } + else + { + USB_CurrentMode = Mode; + } + #endif + + USB_IsInitialized = true; + + USB_ResetInterface(); +} + +void USB_Disable(void) +{ + USB_INT_DisableAllInterrupts(); + USB_INT_ClearAllInterrupts(); + + USB_Detach(); + USB_Controller_Disable(); + + if (!(USB_Options & USB_OPT_MANUAL_PLL)) + USB_PLL_Off(); + + USB_REG_Off(); + + #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) + USB_OTGPAD_Off(); + #endif + + #if defined(USB_CAN_BE_BOTH) + USB_CurrentMode = USB_MODE_None; + #endif + + USB_IsInitialized = false; +} + +void USB_ResetInterface(void) +{ + #if defined(USB_CAN_BE_BOTH) + bool UIDModeSelectEnabled = ((UHWCON & (1 << UIDE)) != 0); + #endif + + USB_INT_DisableAllInterrupts(); + USB_INT_ClearAllInterrupts(); + + USB_Controller_Reset(); + + if (!(USB_Options & USB_OPT_MANUAL_PLL)) + { + #if defined(USB_SERIES_4_AVR) + PLLFRQ = ((1 << PLLUSB) | (1 << PDIV3) | (1 << PDIV1)); + #endif + + USB_PLL_On(); + while (!(USB_PLL_IsReady())); + } + + #if defined(USB_CAN_BE_BOTH) + if (UIDModeSelectEnabled) + { + UHWCON |= (1 << UIDE); + USB_INT_Enable(USB_INT_IDTI); + } + #endif + + USB_CLK_Unfreeze(); + + if (USB_CurrentMode == USB_MODE_Device) + { + #if defined(USB_CAN_BE_DEVICE) + #if (defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)) + UHWCON |= (1 << UIMOD); + #endif + + USB_Init_Device(); + #endif + } + else if (USB_CurrentMode == USB_MODE_Host) + { + #if defined(USB_CAN_BE_HOST) + UHWCON &= ~(1 << UIMOD); + + USB_Init_Host(); + #endif + } + + #if (defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)) + USB_OTGPAD_On(); + #endif +} + +#if defined(USB_CAN_BE_DEVICE) +static void USB_Init_Device(void) +{ + USB_DeviceState = DEVICE_STATE_Unattached; + USB_ConfigurationNumber = 0; + + #if !defined(NO_DEVICE_REMOTE_WAKEUP) + USB_RemoteWakeupEnabled = false; + #endif + + #if !defined(NO_DEVICE_SELF_POWER) + USB_CurrentlySelfPowered = false; + #endif + + #if !defined(FIXED_CONTROL_ENDPOINT_SIZE) + USB_Descriptor_Device_t* DeviceDescriptorPtr; + + if (CALLBACK_USB_GetDescriptor((DTYPE_Device << 8), 0, (void*)&DeviceDescriptorPtr) != NO_DESCRIPTOR) + { + #if defined(USE_RAM_DESCRIPTORS) + USB_ControlEndpointSize = DeviceDescriptorPtr->Endpoint0Size; + #elif defined(USE_EEPROM_DESCRIPTORS) + USB_ControlEndpointSize = eeprom_read_byte(&DeviceDescriptorPtr->Endpoint0Size); + #else + USB_ControlEndpointSize = pgm_read_byte(&DeviceDescriptorPtr->Endpoint0Size); + #endif + } + #endif + + #if (defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)) + if (USB_Options & USB_DEVICE_OPT_LOWSPEED) + USB_Device_SetLowSpeed(); + else + USB_Device_SetFullSpeed(); + + USB_INT_Enable(USB_INT_VBUS); + #endif + + Endpoint_ConfigureEndpoint(ENDPOINT_CONTROLEP, EP_TYPE_CONTROL, + ENDPOINT_DIR_OUT, USB_ControlEndpointSize, + ENDPOINT_BANK_SINGLE); + + USB_INT_Clear(USB_INT_SUSPI); + USB_INT_Enable(USB_INT_SUSPI); + USB_INT_Enable(USB_INT_EORSTI); + + USB_Attach(); +} +#endif + +#if defined(USB_CAN_BE_HOST) +static void USB_Init_Host(void) +{ + USB_HostState = HOST_STATE_Unattached; + USB_ControlPipeSize = PIPE_CONTROLPIPE_DEFAULT_SIZE; + + USB_Host_HostMode_On(); + + USB_Host_VBUS_Auto_Off(); + USB_Host_VBUS_Manual_Enable(); + USB_Host_VBUS_Manual_On(); + + USB_INT_Enable(USB_INT_SRPI); + USB_INT_Enable(USB_INT_BCERRI); + + USB_Attach(); +} +#endif + diff --git a/LUFA/Drivers/USB/Core/AVR8/USBController.h b/LUFA/Drivers/USB/Core/AVR8/USBController.h new file mode 100644 index 000000000..292b39369 --- /dev/null +++ b/LUFA/Drivers/USB/Core/AVR8/USBController.h @@ -0,0 +1,466 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB low level USB controller definitions (AVR8) + * + * This file contains structures, function prototypes and macros related to the low level configuration of the + * USB controller, to start, stop and reset the USB library core. + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_USBManagement + * \defgroup Group_USBManagement_AVR8 USB Interface Management (AVR8) + * + * Functions, macros, variables, enums and types related to the setup and management of the USB interface. + * + * @{ + */ + +#ifndef __USBCONTROLLER_AVR8_H__ +#define __USBCONTROLLER_AVR8_H__ + + /* Includes: */ + #include "../../../../Common/Common.h" + #include "../USBMode.h" + #include "../Events.h" + #include "../USBTask.h" + #include "../USBInterrupt.h" + + #if defined(USB_CAN_BE_HOST) || defined(__DOXYGEN__) + #include "../Host.h" + #include "../OTG.h" + #include "../Pipe.h" + #include "../HostStandardReq.h" + #include "../PipeStream.h" + #endif + + #if defined(USB_CAN_BE_DEVICE) || defined(__DOXYGEN__) + #include "../Device.h" + #include "../Endpoint.h" + #include "../DeviceStandardReq.h" + #include "../EndpointStream.h" + #endif + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks and Defines: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + #if !defined(F_CLOCK) + #error F_CLOCK is not defined. You must define F_CLOCK to the frequency of the unprescaled input clock in your project makefile. + #endif + + #if (F_CLOCK == 8000000) + #if (defined(__AVR_AT90USB82__) || defined(__AVR_AT90USB162__) || \ + defined(__AVR_ATmega8U2__) || defined(__AVR_ATmega16U2__) || \ + defined(__AVR_ATmega32U2__)) + #define USB_PLL_PSC 0 + #elif (defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__)) + #define USB_PLL_PSC 0 + #elif (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__) || defined(__AVR_ATmega32U6__)) + #define USB_PLL_PSC ((1 << PLLP1) | (1 << PLLP0)) + #elif (defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1287__)) + #define USB_PLL_PSC ((1 << PLLP1) | (1 << PLLP0)) + #endif + #elif (F_CLOCK == 16000000) + #if (defined(__AVR_AT90USB82__) || defined(__AVR_AT90USB162__) || \ + defined(__AVR_ATmega8U2__) || defined(__AVR_ATmega16U2__) || \ + defined(__AVR_ATmega32U2__)) + #define USB_PLL_PSC (1 << PLLP0) + #elif (defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__)) + #define USB_PLL_PSC (1 << PINDIV) + #elif (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_ATmega32U6__)) + #define USB_PLL_PSC ((1 << PLLP2) | (1 << PLLP1)) + #elif (defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__)) + #define USB_PLL_PSC ((1 << PLLP2) | (1 << PLLP0)) + #endif + #endif + + #if !defined(USB_PLL_PSC) + #error No PLL prescale value available for chosen F_CLOCK value and AVR model. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** \name USB Controller Option Masks */ + //@{ + /** Regulator disable option mask for \ref USB_Init(). This indicates that the internal 3.3V USB data pad + * regulator should be enabled to regulate the data pin voltages to within the USB standard. + * + * \note See USB AVR data sheet for more information on the internal pad regulator. + */ + #define USB_OPT_REG_DISABLED (1 << 1) + + /** Regulator enable option mask for \ref USB_Init(). This indicates that the internal 3.3V USB data pad + * regulator should be disabled and the AVR's VCC level used for the data pads. + * + * \note See USB AVR data sheet for more information on the internal pad regulator. + */ + #define USB_OPT_REG_ENABLED (0 << 1) + + /** Manual PLL control option mask for \ref USB_Init(). This indicates to the library that the user application + * will take full responsibility for controlling the AVR's PLL (used to generate the high frequency clock + * that the USB controller requires) and ensuring that it is locked at the correct frequency for USB operations. + */ + #define USB_OPT_MANUAL_PLL (1 << 2) + + /** Automatic PLL control option mask for \ref USB_Init(). This indicates to the library that the library should + * take full responsibility for controlling the AVR's PLL (used to generate the high frequency clock + * that the USB controller requires) and ensuring that it is locked at the correct frequency for USB operations. + */ + #define USB_OPT_AUTO_PLL (0 << 2) + //@} + + /** \name Endpoint/Pipe Type Masks */ + //@{ + /** Mask for a CONTROL type endpoint or pipe. + * + * \note See \ref Group_EndpointManagement and \ref Group_PipeManagement for endpoint/pipe functions. + */ + #define EP_TYPE_CONTROL 0x00 + + /** Mask for an ISOCHRONOUS type endpoint or pipe. + * + * \note See \ref Group_EndpointManagement and \ref Group_PipeManagement for endpoint/pipe functions. + */ + #define EP_TYPE_ISOCHRONOUS 0x01 + + /** Mask for a BULK type endpoint or pipe. + * + * \note See \ref Group_EndpointManagement and \ref Group_PipeManagement for endpoint/pipe functions. + */ + #define EP_TYPE_BULK 0x02 + + /** Mask for an INTERRUPT type endpoint or pipe. + * + * \note See \ref Group_EndpointManagement and \ref Group_PipeManagement for endpoint/pipe functions. + */ + #define EP_TYPE_INTERRUPT 0x03 + //@} + + #if !defined(USB_STREAM_TIMEOUT_MS) || defined(__DOXYGEN__) + /** Constant for the maximum software timeout period of the USB data stream transfer functions + * (both control and standard) when in either device or host mode. If the next packet of a stream + * is not received or acknowledged within this time period, the stream function will fail. + * + * This value may be overridden in the user project makefile as the value of the + * \ref USB_STREAM_TIMEOUT_MS token, and passed to the compiler using the -D switch. + */ + #define USB_STREAM_TIMEOUT_MS 100 + #endif + + /* Inline Functions: */ + #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) || defined(__DOXYGEN__) + /** Determines if the VBUS line is currently high (i.e. the USB host is supplying power). + * + * \note This function is not available on some AVR models which do not support hardware VBUS monitoring. + * + * \return Boolean \c true if the VBUS line is currently detecting power from a host, \c false otherwise. + */ + static inline bool USB_VBUS_GetStatus(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool USB_VBUS_GetStatus(void) + { + return ((USBSTA & (1 << VBUS)) ? true : false); + } + #endif + + /** Detaches the device from the USB bus. This has the effect of removing the device from any + * attached host, ceasing USB communications. If no host is present, this prevents any host from + * enumerating the device once attached until \ref USB_Attach() is called. + */ + static inline void USB_Detach(void) ATTR_ALWAYS_INLINE; + static inline void USB_Detach(void) + { + UDCON |= (1 << DETACH); + } + + /** Attaches the device to the USB bus. This announces the device's presence to any attached + * USB host, starting the enumeration process. If no host is present, attaching the device + * will allow for enumeration once a host is connected to the device. + * + * This is inexplicably also required for proper operation while in host mode, to enable the + * attachment of a device to the host. This is despite the bit being located in the device-mode + * register and despite the datasheet making no mention of its requirement in host mode. + */ + static inline void USB_Attach(void) ATTR_ALWAYS_INLINE; + static inline void USB_Attach(void) + { + UDCON &= ~(1 << DETACH); + } + + /* Function Prototypes: */ + /** Main function to initialize and start the USB interface. Once active, the USB interface will + * allow for device connection to a host when in device mode, or for device enumeration while in + * host mode. + * + * As the USB library relies on interrupts for the device and host mode enumeration processes, + * the user must enable global interrupts before or shortly after this function is called. In + * device mode, interrupts must be enabled within 500ms of this function being called to ensure + * that the host does not time out whilst enumerating the device. In host mode, interrupts may be + * enabled at the application's leisure however enumeration will not begin of an attached device + * until after this has occurred. + * + * Calling this function when the USB interface is already initialized will cause a complete USB + * interface reset and re-enumeration. + * + * \param[in] Mode This is a mask indicating what mode the USB interface is to be initialized to, a value + * from the \ref USB_Modes_t enum. + * + * \param[in] Options Mask indicating the options which should be used when initializing the USB + * interface to control the USB interface's behaviour. This should be comprised of + * a \c USB_OPT_REG_* mask to control the regulator, a \c USB_OPT_*_PLL mask to control the + * PLL, and a \c USB_DEVICE_OPT_* mask (when the device mode is enabled) to set the device + * mode speed. + * + * \note To reduce the FLASH requirements of the library if only device or host mode is required, + * the mode can be statically set in the project makefile by defining the token \c USB_DEVICE_ONLY + * (for device mode) or \c USB_HOST_ONLY (for host mode), passing the token to the compiler + * via the -D switch. If the mode is statically set, this parameter does not exist in the + * function prototype. + * \n\n + * + * \note To reduce the FLASH requirements of the library if only fixed settings are are required, + * the options may be set statically in the same manner as the mode (see the Mode parameter of + * this function). To statically set the USB options, pass in the \c USE_STATIC_OPTIONS token, + * defined to the appropriate options masks. When the options are statically set, this + * parameter does not exist in the function prototype. + * \n\n + * + * \note The mode parameter does not exist on devices where only one mode is possible, such as USB + * AVR models which only implement the USB device mode in hardware. + * + * \see \ref Group_Device for the \c USB_DEVICE_OPT_* masks. + */ + void USB_Init( + #if defined(USB_CAN_BE_BOTH) || defined(__DOXYGEN__) + const uint8_t Mode + #endif + + #if (defined(USB_CAN_BE_BOTH) && !defined(USE_STATIC_OPTIONS)) || defined(__DOXYGEN__) + , + #elif (!defined(USB_CAN_BE_BOTH) && defined(USE_STATIC_OPTIONS)) + void + #endif + + #if !defined(USE_STATIC_OPTIONS) || defined(__DOXYGEN__) + const uint8_t Options + #endif + ); + + /** Shuts down the USB interface. This turns off the USB interface after deallocating all USB FIFO + * memory, endpoints and pipes. When turned off, no USB functionality can be used until the interface + * is restarted with the \ref USB_Init() function. + */ + void USB_Disable(void); + + /** Resets the interface, when already initialized. This will re-enumerate the device if already connected + * to a host, or re-enumerate an already attached device when in host mode. + */ + void USB_ResetInterface(void); + + /* Global Variables: */ + #if (!defined(USB_HOST_ONLY) && !defined(USB_DEVICE_ONLY)) || defined(__DOXYGEN__) + /** Indicates the mode that the USB interface is currently initialized to, a value from the + * \ref USB_Modes_t enum. + * + * \note This variable should be treated as read-only in the user application, and never manually + * changed in value. + * \n\n + * + * \note When the controller is initialized into UID auto-detection mode, this variable will hold the + * currently selected USB mode (i.e. \ref USB_MODE_Device or \ref USB_MODE_Host). If the controller + * is fixed into a specific mode (either through the \c USB_DEVICE_ONLY or \c USB_HOST_ONLY compile time + * options, or a limitation of the USB controller in the chosen device model) this will evaluate to + * a constant of the appropriate value and will never evaluate to \ref USB_MODE_None even when the + * USB interface is not initialized. + */ + extern volatile uint8_t USB_CurrentMode; + #elif defined(USB_HOST_ONLY) + #define USB_CurrentMode USB_MODE_Host + #elif defined(USB_DEVICE_ONLY) + #define USB_CurrentMode USB_MODE_Device + #endif + + #if !defined(USE_STATIC_OPTIONS) || defined(__DOXYGEN__) + /** Indicates the current USB options that the USB interface was initialized with when \ref USB_Init() + * was called. This value will be one of the \c USB_MODE_* masks defined elsewhere in this module. + * + * \note This variable should be treated as read-only in the user application, and never manually + * changed in value. + */ + extern volatile uint8_t USB_Options; + #elif defined(USE_STATIC_OPTIONS) + #define USB_Options USE_STATIC_OPTIONS + #endif + + /* Enums: */ + /** Enum for the possible USB controller modes, for initialization via \ref USB_Init() and indication back to the + * user application via \ref USB_CurrentMode. + */ + enum USB_Modes_t + { + USB_MODE_None = 0, /**< Indicates that the controller is currently not initialized in any specific USB mode. */ + USB_MODE_Device = 1, /**< Indicates that the controller is currently initialized in USB Device mode. */ + USB_MODE_Host = 2, /**< Indicates that the controller is currently initialized in USB Host mode. */ + USB_MODE_UID = 3, /**< Indicates that the controller should determine the USB mode from the UID pin of the + * USB connector. + */ + }; + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Function Prototypes: */ + #if defined(__INCLUDE_FROM_USB_CONTROLLER_C) + #if defined(USB_CAN_BE_DEVICE) + static void USB_Init_Device(void); + #endif + + #if defined(USB_CAN_BE_HOST) + static void USB_Init_Host(void); + #endif + #endif + + /* Inline Functions: */ + static inline void USB_PLL_On(void) ATTR_ALWAYS_INLINE; + static inline void USB_PLL_On(void) + { + PLLCSR = USB_PLL_PSC; + PLLCSR |= (1 << PLLE); + } + + static inline void USB_PLL_Off(void) ATTR_ALWAYS_INLINE; + static inline void USB_PLL_Off(void) + { + PLLCSR = 0; + } + + static inline bool USB_PLL_IsReady(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool USB_PLL_IsReady(void) + { + return ((PLLCSR & (1 << PLOCK)) ? true : false); + } + + static inline void USB_REG_On(void) ATTR_ALWAYS_INLINE; + static inline void USB_REG_On(void) + { + #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) + UHWCON |= (1 << UVREGE); + #else + REGCR &= ~(1 << REGDIS); + #endif + } + + static inline void USB_REG_Off(void) ATTR_ALWAYS_INLINE; + static inline void USB_REG_Off(void) + { + #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) + UHWCON &= ~(1 << UVREGE); + #else + REGCR |= (1 << REGDIS); + #endif + } + + #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) + static inline void USB_OTGPAD_On(void) ATTR_ALWAYS_INLINE; + static inline void USB_OTGPAD_On(void) + { + USBCON |= (1 << OTGPADE); + } + + static inline void USB_OTGPAD_Off(void) ATTR_ALWAYS_INLINE; + static inline void USB_OTGPAD_Off(void) + { + USBCON &= ~(1 << OTGPADE); + } + #endif + + static inline void USB_CLK_Freeze(void) ATTR_ALWAYS_INLINE; + static inline void USB_CLK_Freeze(void) + { + USBCON |= (1 << FRZCLK); + } + + static inline void USB_CLK_Unfreeze(void) ATTR_ALWAYS_INLINE; + static inline void USB_CLK_Unfreeze(void) + { + USBCON &= ~(1 << FRZCLK); + } + + static inline void USB_Controller_Enable(void) ATTR_ALWAYS_INLINE; + static inline void USB_Controller_Enable(void) + { + USBCON |= (1 << USBE); + } + + static inline void USB_Controller_Disable(void) ATTR_ALWAYS_INLINE; + static inline void USB_Controller_Disable(void) + { + USBCON &= ~(1 << USBE); + } + + static inline void USB_Controller_Reset(void) ATTR_ALWAYS_INLINE; + static inline void USB_Controller_Reset(void) + { + const uint8_t Temp = USBCON; + + USBCON = (Temp & ~(1 << USBE)); + USBCON = (Temp | (1 << USBE)); + } + + #if defined(USB_CAN_BE_BOTH) + static inline uint8_t USB_GetUSBModeFromUID(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t USB_GetUSBModeFromUID(void) + { + if (USBSTA & (1 << ID)) + return USB_MODE_Device; + else + return USB_MODE_Host; + } + #endif + + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/LUFA/Drivers/USB/Core/AVR8/USBInterrupt.c b/LUFA/Drivers/USB/Core/AVR8/USBInterrupt.c new file mode 100644 index 000000000..34234fe84 --- /dev/null +++ b/LUFA/Drivers/USB/Core/AVR8/USBInterrupt.c @@ -0,0 +1,269 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#define __INCLUDE_FROM_USB_DRIVER +#include "USBInterrupt.h" + +void USB_INT_DisableAllInterrupts(void) +{ + #if defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) + USBCON &= ~((1 << VBUSTE) | (1 << IDTE)); + #elif defined(USB_SERIES_4_AVR) + USBCON &= ~(1 << VBUSTE); + #endif + + #if defined(USB_CAN_BE_BOTH) + OTGIEN = 0; + #endif + + #if defined(USB_CAN_BE_HOST) + UHIEN = 0; + #endif + + #if defined(USB_CAN_BE_DEVICE) + UDIEN = 0; + #endif +} + +void USB_INT_ClearAllInterrupts(void) +{ + #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) + USBINT = 0; + #endif + + #if defined(USB_CAN_BE_BOTH) + OTGINT = 0; + #endif + + #if defined(USB_CAN_BE_HOST) + UHINT = 0; + #endif + + #if defined(USB_CAN_BE_DEVICE) + UDINT = 0; + #endif +} + +ISR(USB_GEN_vect, ISR_BLOCK) +{ + #if defined(USB_CAN_BE_DEVICE) + #if !defined(NO_SOF_EVENTS) + if (USB_INT_HasOccurred(USB_INT_SOFI) && USB_INT_IsEnabled(USB_INT_SOFI)) + { + USB_INT_Clear(USB_INT_SOFI); + + EVENT_USB_Device_StartOfFrame(); + } + #endif + + #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) + if (USB_INT_HasOccurred(USB_INT_VBUS) && USB_INT_IsEnabled(USB_INT_VBUS)) + { + USB_INT_Clear(USB_INT_VBUS); + + if (USB_VBUS_GetStatus()) + { + USB_DeviceState = DEVICE_STATE_Powered; + EVENT_USB_Device_Connect(); + } + else + { + USB_DeviceState = DEVICE_STATE_Unattached; + EVENT_USB_Device_Disconnect(); + } + } + #endif + + if (USB_INT_HasOccurred(USB_INT_SUSPI) && USB_INT_IsEnabled(USB_INT_SUSPI)) + { + USB_INT_Clear(USB_INT_SUSPI); + + USB_INT_Disable(USB_INT_SUSPI); + USB_INT_Enable(USB_INT_WAKEUPI); + + USB_CLK_Freeze(); + + if (!(USB_Options & USB_OPT_MANUAL_PLL)) + USB_PLL_Off(); + + #if defined(USB_SERIES_2_AVR) && !defined(NO_LIMITED_CONTROLLER_CONNECT) + USB_DeviceState = DEVICE_STATE_Unattached; + EVENT_USB_Device_Disconnect(); + #else + USB_DeviceState = DEVICE_STATE_Suspended; + EVENT_USB_Device_Suspend(); + #endif + } + + if (USB_INT_HasOccurred(USB_INT_WAKEUPI) && USB_INT_IsEnabled(USB_INT_WAKEUPI)) + { + if (!(USB_Options & USB_OPT_MANUAL_PLL)) + { + USB_PLL_On(); + while (!(USB_PLL_IsReady())); + } + + USB_CLK_Unfreeze(); + + USB_INT_Clear(USB_INT_WAKEUPI); + + USB_INT_Disable(USB_INT_WAKEUPI); + USB_INT_Enable(USB_INT_SUSPI); + + if (USB_ConfigurationNumber) + USB_DeviceState = DEVICE_STATE_Configured; + else + USB_DeviceState = (USB_Device_IsAddressSet()) ? DEVICE_STATE_Configured : DEVICE_STATE_Powered; + + #if defined(USB_SERIES_2_AVR) && !defined(NO_LIMITED_CONTROLLER_CONNECT) + EVENT_USB_Device_Connect(); + #else + EVENT_USB_Device_WakeUp(); + #endif + } + + if (USB_INT_HasOccurred(USB_INT_EORSTI) && USB_INT_IsEnabled(USB_INT_EORSTI)) + { + USB_INT_Clear(USB_INT_EORSTI); + + USB_DeviceState = DEVICE_STATE_Default; + USB_ConfigurationNumber = 0; + + USB_INT_Clear(USB_INT_SUSPI); + USB_INT_Disable(USB_INT_SUSPI); + USB_INT_Enable(USB_INT_WAKEUPI); + + Endpoint_ConfigureEndpoint(ENDPOINT_CONTROLEP, EP_TYPE_CONTROL, + ENDPOINT_DIR_OUT, USB_ControlEndpointSize, + ENDPOINT_BANK_SINGLE); + + #if defined(INTERRUPT_CONTROL_ENDPOINT) + USB_INT_Enable(USB_INT_RXSTPI); + #endif + + EVENT_USB_Device_Reset(); + } + #endif + + #if defined(USB_CAN_BE_HOST) + #if !defined(NO_SOF_EVENTS) + if (USB_INT_HasOccurred(USB_INT_HSOFI) && USB_INT_IsEnabled(USB_INT_HSOFI)) + { + USB_INT_Clear(USB_INT_HSOFI); + + EVENT_USB_Host_StartOfFrame(); + } + #endif + + if (USB_INT_HasOccurred(USB_INT_DDISCI) && USB_INT_IsEnabled(USB_INT_DDISCI)) + { + USB_INT_Clear(USB_INT_DDISCI); + USB_INT_Clear(USB_INT_DCONNI); + USB_INT_Disable(USB_INT_DDISCI); + + EVENT_USB_Host_DeviceUnattached(); + + USB_ResetInterface(); + } + + if (USB_INT_HasOccurred(USB_INT_VBERRI) && USB_INT_IsEnabled(USB_INT_VBERRI)) + { + USB_INT_Clear(USB_INT_VBERRI); + + USB_Host_VBUS_Manual_Off(); + USB_Host_VBUS_Auto_Off(); + + EVENT_USB_Host_HostError(HOST_ERROR_VBusVoltageDip); + EVENT_USB_Host_DeviceUnattached(); + + USB_HostState = HOST_STATE_Unattached; + } + + if (USB_INT_HasOccurred(USB_INT_SRPI) && USB_INT_IsEnabled(USB_INT_SRPI)) + { + USB_INT_Clear(USB_INT_SRPI); + USB_INT_Disable(USB_INT_SRPI); + + EVENT_USB_Host_DeviceAttached(); + + USB_INT_Enable(USB_INT_DDISCI); + + USB_HostState = HOST_STATE_Powered; + } + + if (USB_INT_HasOccurred(USB_INT_BCERRI) && USB_INT_IsEnabled(USB_INT_BCERRI)) + { + USB_INT_Clear(USB_INT_BCERRI); + + EVENT_USB_Host_DeviceEnumerationFailed(HOST_ENUMERROR_NoDeviceDetected, 0); + EVENT_USB_Host_DeviceUnattached(); + + USB_ResetInterface(); + } + #endif + + #if defined(USB_CAN_BE_BOTH) + if (USB_INT_HasOccurred(USB_INT_IDTI) && USB_INT_IsEnabled(USB_INT_IDTI)) + { + USB_INT_Clear(USB_INT_IDTI); + + if (USB_DeviceState != DEVICE_STATE_Unattached) + EVENT_USB_Device_Disconnect(); + + if (USB_HostState != HOST_STATE_Unattached) + EVENT_USB_Host_DeviceUnattached(); + + USB_CurrentMode = USB_GetUSBModeFromUID(); + USB_ResetInterface(); + + EVENT_USB_UIDChange(); + } + #endif +} + +#if defined(INTERRUPT_CONTROL_ENDPOINT) && defined(USB_CAN_BE_DEVICE) +ISR(USB_COM_vect, ISR_BLOCK) +{ + uint8_t PrevSelectedEndpoint = Endpoint_GetCurrentEndpoint(); + + Endpoint_SelectEndpoint(ENDPOINT_CONTROLEP); + USB_INT_Disable(USB_INT_RXSTPI); + + NONATOMIC_BLOCK(NONATOMIC_FORCEOFF) + { + USB_Device_ProcessControlRequest(); + } + + Endpoint_SelectEndpoint(ENDPOINT_CONTROLEP); + USB_INT_Enable(USB_INT_RXSTPI); + Endpoint_SelectEndpoint(PrevSelectedEndpoint); +} +#endif + diff --git a/LUFA/Drivers/USB/Core/AVR8/USBInterrupt.h b/LUFA/Drivers/USB/Core/AVR8/USBInterrupt.h new file mode 100644 index 000000000..3cb0b66be --- /dev/null +++ b/LUFA/Drivers/USB/Core/AVR8/USBInterrupt.h @@ -0,0 +1,102 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB controller interrupt service routine management (AVR8) + * + * This file contains definitions required for the correct handling of low level USB service routine interrupts + * from the USB controller. + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +#ifndef __USBINTERRUPT_AVR8_H__ +#define __USBINTERRUPT_AVR8_H__ + + /* Includes: */ + #include "../../../../Common/Common.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Macros: */ + #define USB_INT_Enable(int) MACROS{ USB_INT_GET_EN_REG(int) |= USB_INT_GET_EN_MASK(int); }MACROE + #define USB_INT_Disable(int) MACROS{ USB_INT_GET_EN_REG(int) &= ~(USB_INT_GET_EN_MASK(int)); }MACROE + #define USB_INT_Clear(int) MACROS{ USB_INT_GET_INT_REG(int) &= ~(USB_INT_GET_INT_MASK(int)); }MACROE + #define USB_INT_IsEnabled(int) ((USB_INT_GET_EN_REG(int) & USB_INT_GET_EN_MASK(int)) ? true : false) + #define USB_INT_HasOccurred(int) ((USB_INT_GET_INT_REG(int) & USB_INT_GET_INT_MASK(int)) ? true : false) + + #define USB_INT_GET_EN_REG(a, b, c, d) a + #define USB_INT_GET_EN_MASK(a, b, c, d) b + #define USB_INT_GET_INT_REG(a, b, c, d) c + #define USB_INT_GET_INT_MASK(a, b, c, d) d + + #define USB_INT_VBUS USBCON, (1 << VBUSTE) , USBINT, (1 << VBUSTI) + #define USB_INT_IDTI USBCON, (1 << IDTE) , USBINT, (1 << IDTI) + #define USB_INT_WAKEUPI UDIEN , (1 << WAKEUPE), UDINT , (1 << WAKEUPI) + #define USB_INT_SUSPI UDIEN , (1 << SUSPE) , UDINT , (1 << SUSPI) + #define USB_INT_EORSTI UDIEN , (1 << EORSTE) , UDINT , (1 << EORSTI) + #define USB_INT_DCONNI UHIEN , (1 << DCONNE) , UHINT , (1 << DCONNI) + #define USB_INT_DDISCI UHIEN , (1 << DDISCE) , UHINT , (1 << DDISCI) + #define USB_INT_BCERRI OTGIEN, (1 << BCERRE) , OTGINT, (1 << BCERRI) + #define USB_INT_VBERRI OTGIEN, (1 << VBERRE) , OTGINT, (1 << VBERRI) + #define USB_INT_SOFI UDIEN, (1 << SOFE) , UDINT , (1 << SOFI) + #define USB_INT_HSOFI UHIEN, (1 << HSOFE) , UHINT , (1 << HSOFI) + #define USB_INT_RSTI UHIEN , (1 << RSTE) , UHINT , (1 << RSTI) + #define USB_INT_SRPI OTGIEN, (1 << SRPE) , OTGINT, (1 << SRPI) + #define USB_INT_RXSTPI UEIENX, (1 << RXSTPE) , UEINTX, (1 << RXSTPI) + + /* Includes: */ + #include "../USBMode.h" + #include "../Events.h" + #include "../USBController.h" + + /* Function Prototypes: */ + void USB_INT_ClearAllInterrupts(void); + void USB_INT_DisableAllInterrupts(void); + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + diff --git a/LUFA/Drivers/USB/Core/ConfigDescriptor.c b/LUFA/Drivers/USB/Core/ConfigDescriptor.c new file mode 100644 index 000000000..9671659d6 --- /dev/null +++ b/LUFA/Drivers/USB/Core/ConfigDescriptor.c @@ -0,0 +1,142 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#define __INCLUDE_FROM_USB_DRIVER +#include "ConfigDescriptor.h" + +#if defined(USB_CAN_BE_HOST) +uint8_t USB_Host_GetDeviceConfigDescriptor(uint8_t ConfigNumber, uint16_t* const ConfigSizePtr, + void* BufferPtr, uint16_t BufferSize) +{ + uint8_t ErrorCode; + uint8_t ConfigHeader[sizeof(USB_Descriptor_Configuration_Header_t)]; + + USB_ControlRequest = (USB_Request_Header_t) + { + .bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE), + .bRequest = REQ_GetDescriptor, + .wValue = ((DTYPE_Configuration << 8) | (ConfigNumber - 1)), + .wIndex = 0, + .wLength = sizeof(USB_Descriptor_Configuration_Header_t), + }; + + Pipe_SelectPipe(PIPE_CONTROLPIPE); + + if ((ErrorCode = USB_Host_SendControlRequest(ConfigHeader)) != HOST_SENDCONTROL_Successful) + return ErrorCode; + + *ConfigSizePtr = DESCRIPTOR_PCAST(ConfigHeader, USB_Descriptor_Configuration_Header_t)->TotalConfigurationSize; + + if (*ConfigSizePtr > BufferSize) + return HOST_GETCONFIG_BuffOverflow; + + USB_ControlRequest.wLength = *ConfigSizePtr; + + if ((ErrorCode = USB_Host_SendControlRequest(BufferPtr)) != HOST_SENDCONTROL_Successful) + return ErrorCode; + + if (DESCRIPTOR_TYPE(BufferPtr) != DTYPE_Configuration) + return HOST_GETCONFIG_InvalidData; + + return HOST_GETCONFIG_Successful; +} +#endif + +void USB_GetNextDescriptorOfType(uint16_t* const BytesRem, + void** const CurrConfigLoc, + const uint8_t Type) +{ + while (*BytesRem) + { + USB_GetNextDescriptor(BytesRem, CurrConfigLoc); + + if (DESCRIPTOR_TYPE(*CurrConfigLoc) == Type) + return; + } +} + +void USB_GetNextDescriptorOfTypeBefore(uint16_t* const BytesRem, + void** const CurrConfigLoc, + const uint8_t Type, + const uint8_t BeforeType) +{ + while (*BytesRem) + { + USB_GetNextDescriptor(BytesRem, CurrConfigLoc); + + if (DESCRIPTOR_TYPE(*CurrConfigLoc) == Type) + { + return; + } + else if (DESCRIPTOR_TYPE(*CurrConfigLoc) == BeforeType) + { + *BytesRem = 0; + return; + } + } +} + +void USB_GetNextDescriptorOfTypeAfter(uint16_t* const BytesRem, + void** const CurrConfigLoc, + const uint8_t Type, + const uint8_t AfterType) +{ + USB_GetNextDescriptorOfType(BytesRem, CurrConfigLoc, AfterType); + + if (*BytesRem) + USB_GetNextDescriptorOfType(BytesRem, CurrConfigLoc, Type); +} + +uint8_t USB_GetNextDescriptorComp(uint16_t* const BytesRem, void** const CurrConfigLoc, ConfigComparatorPtr_t const ComparatorRoutine) +{ + uint8_t ErrorCode; + + while (*BytesRem) + { + uint8_t* PrevDescLoc = *CurrConfigLoc; + uint16_t PrevBytesRem = *BytesRem; + + USB_GetNextDescriptor(BytesRem, CurrConfigLoc); + + if ((ErrorCode = ComparatorRoutine(*CurrConfigLoc)) != DESCRIPTOR_SEARCH_NotFound) + { + if (ErrorCode == DESCRIPTOR_SEARCH_Fail) + { + *CurrConfigLoc = PrevDescLoc; + *BytesRem = PrevBytesRem; + } + + return ErrorCode; + } + } + + return DESCRIPTOR_SEARCH_COMP_EndOfDescriptor; +} + diff --git a/LUFA/Drivers/USB/Core/ConfigDescriptor.h b/LUFA/Drivers/USB/Core/ConfigDescriptor.h new file mode 100644 index 000000000..2f0ac8e02 --- /dev/null +++ b/LUFA/Drivers/USB/Core/ConfigDescriptor.h @@ -0,0 +1,285 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Configuration descriptor parser API. + * + * This section of the library gives a friendly API which can be used in host applications to easily + * parse an attached device's configuration descriptor so that endpoint, interface and other descriptor + * data can be extracted and used as needed. + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_Descriptors + * \defgroup Group_ConfigDescriptorParser Configuration Descriptor Parser + * + * Functions, macros, variables, enums and types related to the parsing of Configuration Descriptors. + * + * @{ + */ + +#ifndef __CONFIGDESCRIPTOR_H__ +#define __CONFIGDESCRIPTOR_H__ + + /* Includes: */ + #include "../../../Common/Common.h" + #include "HostStandardReq.h" + #include "USBMode.h" + #include "StdDescriptors.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** Mask for determining the type of an endpoint from an endpoint descriptor. This should then be compared + * with the \c EP_TYPE_* masks to determine the exact type of the endpoint. + */ + #define EP_TYPE_MASK 0x03 + + /** Casts a pointer to a descriptor inside the configuration descriptor into a pointer to the given + * descriptor type. + * + * Usage Example: + * \code + * uint8_t* CurrDescriptor = &ConfigDescriptor[0]; // Pointing to the configuration header + * USB_Descriptor_Configuration_Header_t* ConfigHeaderPtr = DESCRIPTOR_PCAST(CurrDescriptor, + * USB_Descriptor_Configuration_Header_t); + * + * // Can now access elements of the configuration header struct using the -> indirection operator + * \endcode + */ + #define DESCRIPTOR_PCAST(DescriptorPtr, Type) ((Type*)(DescriptorPtr)) + + /** Casts a pointer to a descriptor inside the configuration descriptor into the given descriptor + * type (as an actual struct instance rather than a pointer to a struct). + * + * Usage Example: + * \code + * uint8_t* CurrDescriptor = &ConfigDescriptor[0]; // Pointing to the configuration header + * USB_Descriptor_Configuration_Header_t ConfigHeader = DESCRIPTOR_CAST(CurrDescriptor, + * USB_Descriptor_Configuration_Header_t); + * + * // Can now access elements of the configuration header struct using the . operator + * \endcode + */ + #define DESCRIPTOR_CAST(DescriptorPtr, Type) (*DESCRIPTOR_PCAST(DescriptorPtr, Type)) + + /** Returns the descriptor's type, expressed as the 8-bit type value in the header of the descriptor. + * This value's meaning depends on the descriptor's placement in the descriptor, but standard type + * values can be accessed in the \ref USB_DescriptorTypes_t enum. + */ + #define DESCRIPTOR_TYPE(DescriptorPtr) DESCRIPTOR_PCAST(DescriptorPtr, USB_Descriptor_Header_t)->Type + + /** Returns the descriptor's size, expressed as the 8-bit value indicating the number of bytes. */ + #define DESCRIPTOR_SIZE(DescriptorPtr) DESCRIPTOR_PCAST(DescriptorPtr, USB_Descriptor_Header_t)->Size + + /* Type Defines: */ + /** Type define for a Configuration Descriptor comparator function (function taking a pointer to an array + * of type void, returning a uint8_t value). + * + * \see \ref USB_GetNextDescriptorComp function for more details. + */ + typedef uint8_t (* ConfigComparatorPtr_t)(void*); + + /* Enums: */ + /** Enum for the possible return codes of the \ref USB_Host_GetDeviceConfigDescriptor() function. */ + enum USB_Host_GetConfigDescriptor_ErrorCodes_t + { + HOST_GETCONFIG_Successful = 0, /**< No error occurred while retrieving the configuration descriptor. */ + HOST_GETCONFIG_DeviceDisconnect = 1, /**< The attached device was disconnected while retrieving the configuration + * descriptor. + */ + HOST_GETCONFIG_PipeError = 2, /**< An error occurred in the pipe while sending the request. */ + HOST_GETCONFIG_SetupStalled = 3, /**< The attached device stalled the request to retrieve the configuration + * descriptor. + */ + HOST_GETCONFIG_SoftwareTimeOut = 4, /**< The request or data transfer timed out. */ + HOST_GETCONFIG_BuffOverflow = 5, /**< The device's configuration descriptor is too large to fit into the allocated + * buffer. + */ + HOST_GETCONFIG_InvalidData = 6, /**< The device returned invalid configuration descriptor data. */ + }; + + /** Enum for return values of a descriptor comparator function. */ + enum DSearch_Return_ErrorCodes_t + { + DESCRIPTOR_SEARCH_Found = 0, /**< Current descriptor matches comparator criteria. */ + DESCRIPTOR_SEARCH_Fail = 1, /**< No further descriptor could possibly match criteria, fail the search. */ + DESCRIPTOR_SEARCH_NotFound = 2, /**< Current descriptor does not match comparator criteria. */ + }; + + /** Enum for return values of \ref USB_GetNextDescriptorComp(). */ + enum DSearch_Comp_Return_ErrorCodes_t + { + DESCRIPTOR_SEARCH_COMP_Found = 0, /**< Configuration descriptor now points to descriptor which matches + * search criteria of the given comparator function. */ + DESCRIPTOR_SEARCH_COMP_Fail = 1, /**< Comparator function returned \ref DESCRIPTOR_SEARCH_Fail. */ + DESCRIPTOR_SEARCH_COMP_EndOfDescriptor = 2, /**< End of configuration descriptor reached before match found. */ + }; + + /* Function Prototypes: */ + /** Retrieves the configuration descriptor data from an attached device via a standard request into a buffer, + * including validity and size checking to prevent a buffer overflow. + * + * \param[in] ConfigNumber Device configuration descriptor number to fetch from the device (usually set to 1 for + * single configuration devices). + * \param[in,out] ConfigSizePtr Pointer to a location for storing the retrieved configuration descriptor size. + * \param[out] BufferPtr Pointer to the buffer for storing the configuration descriptor data. + * \param[out] BufferSize Size of the allocated buffer where the configuration descriptor is to be stored. + * + * \return A value from the \ref USB_Host_GetConfigDescriptor_ErrorCodes_t enum. + */ + uint8_t USB_Host_GetDeviceConfigDescriptor(uint8_t ConfigNumber, uint16_t* const ConfigSizePtr, void* BufferPtr, + uint16_t BufferSize) ATTR_NON_NULL_PTR_ARG(2) ATTR_NON_NULL_PTR_ARG(3); + + /** Skips to the next sub-descriptor inside the configuration descriptor of the specified type value. + * The bytes remaining value is automatically decremented. + * + * \param[in,out] BytesRem Pointer to the number of bytes remaining of the configuration descriptor. + * \param[in,out] CurrConfigLoc Pointer to the current descriptor inside the configuration descriptor. + * \param[in] Type Descriptor type value to search for. + */ + void USB_GetNextDescriptorOfType(uint16_t* const BytesRem, + void** const CurrConfigLoc, + const uint8_t Type) + ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2); + + /** Skips to the next sub-descriptor inside the configuration descriptor of the specified type value, + * which must come before a descriptor of the second given type value. If the BeforeType type + * descriptor is reached first, the number of bytes remaining to process is set to zero and the + * function exits. The bytes remaining value is automatically decremented. + * + * \param[in,out] BytesRem Pointer to the number of bytes remaining of the configuration descriptor. + * \param[in,out] CurrConfigLoc Pointer to the current descriptor inside the configuration descriptor. + * \param[in] Type Descriptor type value to search for. + * \param[in] BeforeType Descriptor type value which must not be reached before the given Type descriptor. + */ + void USB_GetNextDescriptorOfTypeBefore(uint16_t* const BytesRem, + void** const CurrConfigLoc, + const uint8_t Type, + const uint8_t BeforeType) + ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2); + + /** Skips to the next sub-descriptor inside the configuration descriptor of the specified type value, + * which must come after a descriptor of the second given type value. The bytes remaining value is + * automatically decremented. + * + * \param[in,out] BytesRem Pointer to the number of bytes remaining of the configuration descriptor. + * \param[in,out] CurrConfigLoc Pointer to the current descriptor inside the configuration descriptor. + * \param[in] Type Descriptor type value to search for. + * \param[in] AfterType Descriptor type value which must be reached before the given Type descriptor. + */ + void USB_GetNextDescriptorOfTypeAfter(uint16_t* const BytesRem, + void** const CurrConfigLoc, + const uint8_t Type, + const uint8_t AfterType) + ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2); + + /** Searches for the next descriptor in the given configuration descriptor using a pre-made comparator + * function. The routine updates the position and remaining configuration descriptor bytes values + * automatically. If a comparator routine fails a search, the descriptor pointer is retreated back + * so that the next descriptor search invocation will start from the descriptor which first caused the + * original search to fail. This behaviour allows for one comparator to be used immediately after another + * has failed, starting the second search from the descriptor which failed the first. + * + * Comparator functions should be standard functions which accept a pointer to the header of the current + * descriptor inside the configuration descriptor which is being compared, and should return a value from + * the \ref DSearch_Return_ErrorCodes_t enum as a uint8_t value. + * + * \note This function is available in USB Host mode only. + * + * \param[in,out] BytesRem Pointer to an int storing the remaining bytes in the configuration descriptor. + * \param[in,out] CurrConfigLoc Pointer to the current position in the configuration descriptor. + * \param[in] ComparatorRoutine Name of the comparator search function to use on the configuration descriptor. + * + * \return Value of one of the members of the \ref DSearch_Comp_Return_ErrorCodes_t enum. + * + * Usage Example: + * \code + * uint8_t EndpointSearcher(void* CurrentDescriptor); // Comparator Prototype + * + * uint8_t EndpointSearcher(void* CurrentDescriptor) + * { + * if (DESCRIPTOR_TYPE(CurrentDescriptor) == DTYPE_Endpoint) + * return DESCRIPTOR_SEARCH_Found; + * else + * return DESCRIPTOR_SEARCH_NotFound; + * } + * + * //... + * // After retrieving configuration descriptor: + * if (USB_Host_GetNextDescriptorComp(&BytesRemaining, &CurrentConfigLoc, EndpointSearcher) == + * Descriptor_Search_Comp_Found) + * { + * // Do something with the endpoint descriptor + * } + * \endcode + */ + uint8_t USB_GetNextDescriptorComp(uint16_t* const BytesRem, + void** const CurrConfigLoc, + ConfigComparatorPtr_t const ComparatorRoutine); + + /* Inline Functions: */ + /** Skips over the current sub-descriptor inside the configuration descriptor, so that the pointer then + points to the next sub-descriptor. The bytes remaining value is automatically decremented. + * + * \param[in,out] BytesRem Pointer to the number of bytes remaining of the configuration descriptor. + * \param[in,out] CurrConfigLoc Pointer to the current descriptor inside the configuration descriptor. + */ + static inline void USB_GetNextDescriptor(uint16_t* const BytesRem, + void** CurrConfigLoc) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2); + static inline void USB_GetNextDescriptor(uint16_t* const BytesRem, + void** CurrConfigLoc) + { + uint16_t CurrDescriptorSize = DESCRIPTOR_CAST(*CurrConfigLoc, USB_Descriptor_Header_t).Size; + + *CurrConfigLoc = ((uint8_t*)*CurrConfigLoc) + CurrDescriptorSize; + *BytesRem -= CurrDescriptorSize; + } + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/LUFA/Drivers/USB/Core/Device.h b/LUFA/Drivers/USB/Core/Device.h new file mode 100644 index 000000000..8c85451ac --- /dev/null +++ b/LUFA/Drivers/USB/Core/Device.h @@ -0,0 +1,71 @@ +/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2011.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief Common USB device mode definitions.
+ *
+ * This file contains common structures, function prototypes and macros related to USB device mode for all
+ * architectures.
+ *
+ * \note This file should not be included directly. It is automatically included as needed by the USB driver
+ * dispatch header located in LUFA/Drivers/USB/USB.h.
+ */
+
+/** \ingroup Group_USB
+ * \defgroup Group_Device Device Management
+ *
+ * USB Device mode related definitions common to all architectures. This module contains definitions which
+ * are used when the USB controller is initialized in device mode.
+ *
+ * @{
+ */
+
+#ifndef __USBDEVICE_H__
+#define __USBDEVICE_H__
+
+ /* Includes: */
+ #include "../../../Common/Common.h"
+ #include "StdDescriptors.h"
+ #include "USBInterrupt.h"
+ #include "Endpoint.h"
+
+ #if (ARCH == ARCH_AVR8)
+ #include "AVR8/Device.h"
+ #endif
+
+ /* Preprocessor Checks: */
+ #if !defined(__INCLUDE_FROM_USB_DRIVER)
+ #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
+ #endif
+
+#endif
+
+/** @} */
+
diff --git a/LUFA/Drivers/USB/Core/DeviceStandardReq.c b/LUFA/Drivers/USB/Core/DeviceStandardReq.c new file mode 100644 index 000000000..f0c336eda --- /dev/null +++ b/LUFA/Drivers/USB/Core/DeviceStandardReq.c @@ -0,0 +1,361 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#define __INCLUDE_FROM_USB_DRIVER +#include "USBMode.h" + +#if defined(USB_CAN_BE_DEVICE) + +#define __INCLUDE_FROM_DEVICESTDREQ_C +#include "DeviceStandardReq.h" + +uint8_t USB_ConfigurationNumber; + +#if !defined(NO_DEVICE_SELF_POWER) +bool USB_CurrentlySelfPowered; +#endif + +#if !defined(NO_DEVICE_REMOTE_WAKEUP) +bool USB_RemoteWakeupEnabled; +#endif + +void USB_Device_ProcessControlRequest(void) +{ + uint8_t* RequestHeader = (uint8_t*)&USB_ControlRequest; + + for (uint8_t RequestHeaderByte = 0; RequestHeaderByte < sizeof(USB_Request_Header_t); RequestHeaderByte++) + *(RequestHeader++) = Endpoint_Read_Byte(); + + EVENT_USB_Device_ControlRequest(); + + if (Endpoint_IsSETUPReceived()) + { + uint8_t bmRequestType = USB_ControlRequest.bmRequestType; + + switch (USB_ControlRequest.bRequest) + { + case REQ_GetStatus: + if ((bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE)) || + (bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_ENDPOINT))) + { + USB_Device_GetStatus(); + } + + break; + case REQ_ClearFeature: + case REQ_SetFeature: + if ((bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE)) || + (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_ENDPOINT))) + { + USB_Device_ClearSetFeature(); + } + + break; + case REQ_SetAddress: + if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE)) + USB_Device_SetAddress(); + + break; + case REQ_GetDescriptor: + if ((bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE)) || + (bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_INTERFACE))) + { + USB_Device_GetDescriptor(); + } + + break; + case REQ_GetConfiguration: + if (bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE)) + USB_Device_GetConfiguration(); + + break; + case REQ_SetConfiguration: + if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE)) + USB_Device_SetConfiguration(); + + break; + } + } + + if (Endpoint_IsSETUPReceived()) + { + Endpoint_StallTransaction(); + Endpoint_ClearSETUP(); + } +} + +static void USB_Device_SetAddress(void) +{ + uint8_t DeviceAddress = (USB_ControlRequest.wValue & 0x7F); + + ATOMIC_BLOCK(ATOMIC_RESTORESTATE) + { + Endpoint_ClearSETUP(); + + Endpoint_ClearStatusStage(); + + while (!(Endpoint_IsINReady())); + + USB_Device_SetDeviceAddress(DeviceAddress); + } + + USB_DeviceState = (DeviceAddress) ? DEVICE_STATE_Addressed : DEVICE_STATE_Default; +} + +static void USB_Device_SetConfiguration(void) +{ + #if defined(FIXED_NUM_CONFIGURATIONS) + if ((uint8_t)USB_ControlRequest.wValue > FIXED_NUM_CONFIGURATIONS) + return; + #else + USB_Descriptor_Device_t* DevDescriptorPtr; + + #if defined(USE_FLASH_DESCRIPTORS) + #define MemoryAddressSpace MEMSPACE_FLASH + #elif defined(USE_EEPROM_DESCRIPTORS) + #define MemoryAddressSpace MEMSPACE_EEPROM + #elif defined(USE_SRAM_DESCRIPTORS) + #define MemoryAddressSpace MEMSPACE_SRAM + #else + uint8_t MemoryAddressSpace; + #endif + + if (CALLBACK_USB_GetDescriptor((DTYPE_Device << 8), 0, (void*)&DevDescriptorPtr + #if !defined(USE_FLASH_DESCRIPTORS) && !defined(USE_EEPROM_DESCRIPTORS) && !defined(USE_RAM_DESCRIPTORS) + , &MemoryAddressSpace + #endif + ) == NO_DESCRIPTOR) + { + return; + } + + if (MemoryAddressSpace == MEMSPACE_FLASH) + { + if (((uint8_t)USB_ControlRequest.wValue > pgm_read_byte(&DevDescriptorPtr->NumberOfConfigurations))) + return; + } + else if (MemoryAddressSpace == MEMSPACE_EEPROM) + { + if (((uint8_t)USB_ControlRequest.wValue > eeprom_read_byte(&DevDescriptorPtr->NumberOfConfigurations))) + return; + } + else + { + if ((uint8_t)USB_ControlRequest.wValue > DevDescriptorPtr->NumberOfConfigurations) + return; + } + #endif + + Endpoint_ClearSETUP(); + + USB_ConfigurationNumber = (uint8_t)USB_ControlRequest.wValue; + + Endpoint_ClearStatusStage(); + + if (USB_ConfigurationNumber) + USB_DeviceState = DEVICE_STATE_Configured; + else + USB_DeviceState = (USB_Device_IsAddressSet()) ? DEVICE_STATE_Configured : DEVICE_STATE_Powered; + + EVENT_USB_Device_ConfigurationChanged(); +} + +static void USB_Device_GetConfiguration(void) +{ + Endpoint_ClearSETUP(); + + Endpoint_Write_Byte(USB_ConfigurationNumber); + Endpoint_ClearIN(); + + Endpoint_ClearStatusStage(); +} + +#if !defined(NO_INTERNAL_SERIAL) && (USE_INTERNAL_SERIAL != NO_DESCRIPTOR) +static void USB_Device_GetInternalSerialDescriptor(void) +{ + struct + { + USB_Descriptor_Header_t Header; + wchar_t UnicodeString[20]; + } SignatureDescriptor; + + SignatureDescriptor.Header.Type = DTYPE_String; + SignatureDescriptor.Header.Size = USB_Device_GetSerialString(SignatureDescriptor.UnicodeString, + sizeof(SignatureDescriptor.UnicodeString)); + + Endpoint_ClearSETUP(); + + Endpoint_Write_Control_Stream_LE(&SignatureDescriptor, sizeof(SignatureDescriptor)); + Endpoint_ClearOUT(); +} +#endif + +static void USB_Device_GetDescriptor(void) +{ + const void* DescriptorPointer; + uint16_t DescriptorSize; + + #if !defined(USE_FLASH_DESCRIPTORS) && !defined(USE_EEPROM_DESCRIPTORS) && !defined(USE_RAM_DESCRIPTORS) + uint8_t DescriptorAddressSpace; + #endif + + #if !defined(NO_INTERNAL_SERIAL) && (USE_INTERNAL_SERIAL != NO_DESCRIPTOR) + if (USB_ControlRequest.wValue == ((DTYPE_String << 8) | USE_INTERNAL_SERIAL)) + { + USB_Device_GetInternalSerialDescriptor(); + return; + } + #endif + + if ((DescriptorSize = CALLBACK_USB_GetDescriptor(USB_ControlRequest.wValue, USB_ControlRequest.wIndex, + &DescriptorPointer + #if !defined(USE_FLASH_DESCRIPTORS) && !defined(USE_EEPROM_DESCRIPTORS) && !defined(USE_RAM_DESCRIPTORS) + , &DescriptorAddressSpace + #endif + )) == NO_DESCRIPTOR) + { + return; + } + + Endpoint_ClearSETUP(); + + #if defined(USE_RAM_DESCRIPTORS) + Endpoint_Write_Control_Stream_LE(DescriptorPointer, DescriptorSize); + #elif defined(USE_EEPROM_DESCRIPTORS) + Endpoint_Write_Control_EStream_LE(DescriptorPointer, DescriptorSize); + #elif defined(USE_FLASH_DESCRIPTORS) + Endpoint_Write_Control_PStream_LE(DescriptorPointer, DescriptorSize); + #else + if (DescriptorAddressSpace == MEMSPACE_FLASH) + Endpoint_Write_Control_PStream_LE(DescriptorPointer, DescriptorSize); + else if (DescriptorAddressSpace == MEMSPACE_EEPROM) + Endpoint_Write_Control_EStream_LE(DescriptorPointer, DescriptorSize); + else + Endpoint_Write_Control_Stream_LE(DescriptorPointer, DescriptorSize); + #endif + + Endpoint_ClearOUT(); +} + +static void USB_Device_GetStatus(void) +{ + uint8_t CurrentStatus = 0; + + switch (USB_ControlRequest.bmRequestType) + { + #if !defined(NO_DEVICE_SELF_POWER) || !defined(NO_DEVICE_REMOTE_WAKEUP) + case (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE): + #if !defined(NO_DEVICE_SELF_POWER) + if (USB_CurrentlySelfPowered) + CurrentStatus |= FEATURE_SELFPOWERED_ENABLED; + #endif + + #if !defined(NO_DEVICE_REMOTE_WAKEUP) + if (USB_RemoteWakeupEnabled) + CurrentStatus |= FEATURE_REMOTE_WAKEUP_ENABLED; + #endif + break; + #endif + #if !defined(CONTROL_ONLY_DEVICE) + case (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_ENDPOINT): + Endpoint_SelectEndpoint((uint8_t)USB_ControlRequest.wIndex & ENDPOINT_EPNUM_MASK); + + CurrentStatus = Endpoint_IsStalled(); + + Endpoint_SelectEndpoint(ENDPOINT_CONTROLEP); + + break; + #endif + default: + return; + } + + Endpoint_ClearSETUP(); + + Endpoint_Write_Word_LE(CurrentStatus); + Endpoint_ClearIN(); + + Endpoint_ClearStatusStage(); +} + +static void USB_Device_ClearSetFeature(void) +{ + switch (USB_ControlRequest.bmRequestType & CONTROL_REQTYPE_RECIPIENT) + { + #if !defined(NO_DEVICE_REMOTE_WAKEUP) + case REQREC_DEVICE: + if ((uint8_t)USB_ControlRequest.wValue == FEATURE_SEL_DeviceRemoteWakeup) + USB_RemoteWakeupEnabled = (USB_ControlRequest.bRequest == REQ_SetFeature); + else + return; + + break; + #endif + #if !defined(CONTROL_ONLY_DEVICE) + case REQREC_ENDPOINT: + if ((uint8_t)USB_ControlRequest.wValue == FEATURE_SEL_EndpointHalt) + { + uint8_t EndpointIndex = ((uint8_t)USB_ControlRequest.wIndex & ENDPOINT_EPNUM_MASK); + + if (EndpointIndex == ENDPOINT_CONTROLEP) + return; + + Endpoint_SelectEndpoint(EndpointIndex); + + if (Endpoint_IsEnabled()) + { + if (USB_ControlRequest.bRequest == REQ_SetFeature) + { + Endpoint_StallTransaction(); + } + else + { + Endpoint_ClearStall(); + Endpoint_ResetFIFO(EndpointIndex); + Endpoint_ResetDataToggle(); + } + } + } + + break; + #endif + default: + return; + } + + Endpoint_SelectEndpoint(ENDPOINT_CONTROLEP); + + Endpoint_ClearSETUP(); + + Endpoint_ClearStatusStage(); +} + +#endif + diff --git a/LUFA/Drivers/USB/Core/DeviceStandardReq.h b/LUFA/Drivers/USB/Core/DeviceStandardReq.h new file mode 100644 index 000000000..0ab297da5 --- /dev/null +++ b/LUFA/Drivers/USB/Core/DeviceStandardReq.h @@ -0,0 +1,159 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB device standard request management. + * + * This file contains the function prototypes necessary for the processing of incoming standard control requests + * when the library is in USB device mode. + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +#ifndef __DEVICESTDREQ_H__ +#define __DEVICESTDREQ_H__ + + /* Includes: */ + #include "../../../Common/Common.h" + #include "StdDescriptors.h" + #include "Events.h" + #include "StdRequestType.h" + #include "USBTask.h" + #include "USBController.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + #if defined(USE_SINGLE_DEVICE_CONFIGURATION) + #define FIXED_NUM_CONFIGURATIONS 1 + #endif + + /* Enums: */ + #if !defined(USE_FLASH_DESCRIPTORS) && !defined(USE_EEPROM_DESCRIPTORS) && !defined(USE_RAM_DESCRIPTORS) + /** Enum for the possible descriptor memory spaces, for the \c MemoryAddressSpace parameter of the + * \ref CALLBACK_USB_GetDescriptor() function. This can be used when none of the \c USE_*_DESCRIPTORS + * compile time options are used, to indicate in which memory space the descriptor is stored. + * + * \ingroup Group_Device + */ + enum USB_DescriptorMemorySpaces_t + { + MEMSPACE_FLASH = 0, /**< Indicates the requested descriptor is located in FLASH memory. */ + MEMSPACE_EEPROM = 1, /**< Indicates the requested descriptor is located in EEPROM memory. */ + MEMSPACE_RAM = 2, /**< Indicates the requested descriptor is located in RAM memory. */ + }; + #endif + + /* Global Variables: */ + /** Indicates the currently set configuration number of the device. USB devices may have several + * different configurations which the host can select between; this indicates the currently selected + * value, or 0 if no configuration has been selected. + * + * \note This variable should be treated as read-only in the user application, and never manually + * changed in value. + * + * \ingroup Group_Device + */ + extern uint8_t USB_ConfigurationNumber; + + #if !defined(NO_DEVICE_REMOTE_WAKEUP) + /** Indicates if the host is currently allowing the device to issue remote wakeup events. If this + * flag is cleared, the device should not issue remote wakeup events to the host. + * + * \note This variable should be treated as read-only in the user application, and never manually + * changed in value. + * \n\n + * + * \note To reduce FLASH usage of the compiled applications where Remote Wakeup is not supported, + * this global and the underlying management code can be disabled by defining the + * \c NO_DEVICE_REMOTE_WAKEUP token in the project makefile and passing it to the compiler via + * the -D switch. + * + * \ingroup Group_Device + */ + extern bool USB_RemoteWakeupEnabled; + #endif + + #if !defined(NO_DEVICE_SELF_POWER) + /** Indicates if the device is currently being powered by its own power supply, rather than being + * powered by the host's USB supply. This flag should remain cleared if the device does not + * support self powered mode, as indicated in the device descriptors. + * + * \ingroup Group_Device + */ + extern bool USB_CurrentlySelfPowered; + #endif + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + #if defined(USE_RAM_DESCRIPTORS) && defined(USE_EEPROM_DESCRIPTORS) + #error USE_RAM_DESCRIPTORS and USE_EEPROM_DESCRIPTORS are mutually exclusive. + #elif defined(USE_RAM_DESCRIPTORS) && defined(USE_FLASH_DESCRIPTORS) + #error USE_RAM_DESCRIPTORS and USE_FLASH_DESCRIPTORS are mutually exclusive. + #elif defined(USE_FLASH_DESCRIPTORS) && defined(USE_EEPROM_DESCRIPTORS) + #error USE_FLASH_DESCRIPTORS and USE_EEPROM_DESCRIPTORS are mutually exclusive. + #elif defined(USE_FLASH_DESCRIPTORS) && defined(USE_EEPROM_DESCRIPTORS) && defined(USE_RAM_DESCRIPTORS) + #error Only one of the USE_*_DESCRIPTORS modes should be selected. + #endif + + /* Function Prototypes: */ + void USB_Device_ProcessControlRequest(void); + + #if defined(__INCLUDE_FROM_DEVICESTDREQ_C) + static void USB_Device_SetAddress(void); + static void USB_Device_SetConfiguration(void); + static void USB_Device_GetConfiguration(void); + static void USB_Device_GetDescriptor(void); + static void USB_Device_GetStatus(void); + static void USB_Device_ClearSetFeature(void); + + #if !defined(NO_INTERNAL_SERIAL) && (USE_INTERNAL_SERIAL != NO_DESCRIPTOR) + static void USB_Device_GetInternalSerialDescriptor(void); + #endif + #endif + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + diff --git a/LUFA/Drivers/USB/Core/Endpoint.h b/LUFA/Drivers/USB/Core/Endpoint.h new file mode 100644 index 000000000..302c368e4 --- /dev/null +++ b/LUFA/Drivers/USB/Core/Endpoint.h @@ -0,0 +1,88 @@ +/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2011.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief USB device endpoint management definitions.
+ *
+ * This file contains structures, function prototypes and macros related to the management of the device's
+ * data endpoints when the library is initialized in USB device mode.
+ *
+ * \note This file should not be included directly. It is automatically included as needed by the USB driver
+ * dispatch header located in LUFA/Drivers/USB/USB.h.
+ */
+
+/** \ingroup Group_EndpointManagement
+ * \defgroup Group_EndpointRW Endpoint Data Reading and Writing
+ *
+ * Functions, macros, variables, enums and types related to data reading and writing from and to endpoints.
+ */
+
+/** \ingroup Group_EndpointRW
+ * \defgroup Group_EndpointPrimitiveRW Read/Write of Primitive Data Types
+ *
+ * Functions, macros, variables, enums and types related to data reading and writing of primitive data types
+ * from and to endpoints.
+ */
+
+/** \ingroup Group_EndpointManagement
+ * \defgroup Group_EndpointPacketManagement Endpoint Packet Management
+ *
+ * Functions, macros, variables, enums and types related to packet management of endpoints.
+ */
+
+/** \ingroup Group_USB
+ * \defgroup Group_EndpointManagement Endpoint Management
+ *
+ * Functions, macros and enums related to endpoint management when in USB Device mode. This
+ * module contains the endpoint management macros, as well as endpoint interrupt and data
+ * send/receive functions for various data types.
+ *
+ * @{
+ */
+
+#ifndef __ENDPOINT_H__
+#define __ENDPOINT_H__
+
+ /* Includes: */
+ #include "../../../Common/Common.h"
+
+ #if (ARCH == ARCH_AVR8)
+ #include "AVR8/Endpoint.h"
+ #endif
+
+ /* Preprocessor Checks: */
+ #if !defined(__INCLUDE_FROM_USB_DRIVER)
+ #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
+ #endif
+
+#endif
+
+/** @} */
+
diff --git a/LUFA/Drivers/USB/Core/EndpointStream.c b/LUFA/Drivers/USB/Core/EndpointStream.c new file mode 100644 index 000000000..974af682c --- /dev/null +++ b/LUFA/Drivers/USB/Core/EndpointStream.c @@ -0,0 +1,259 @@ +/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2011.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+#define __INCLUDE_FROM_USB_DRIVER
+#include "USBMode.h"
+
+#if defined(USB_CAN_BE_DEVICE)
+
+#include "EndpointStream.h"
+
+#if !defined(CONTROL_ONLY_DEVICE)
+uint8_t Endpoint_Discard_Stream(uint16_t Length,
+ uint16_t* const BytesProcessed)
+{
+ uint8_t ErrorCode;
+ uint16_t BytesInTransfer = 0;
+
+ if ((ErrorCode = Endpoint_WaitUntilReady()))
+ return ErrorCode;
+
+ if (BytesProcessed != NULL)
+ Length -= *BytesProcessed;
+
+ while (Length)
+ {
+ if (!(Endpoint_IsReadWriteAllowed()))
+ {
+ Endpoint_ClearOUT();
+
+ if (BytesProcessed != NULL)
+ {
+ *BytesProcessed += BytesInTransfer;
+ return ENDPOINT_RWSTREAM_IncompleteTransfer;
+ }
+
+ if ((ErrorCode = Endpoint_WaitUntilReady()))
+ return ErrorCode;
+ }
+ else
+ {
+ Endpoint_Discard_Byte();
+
+ Length--;
+ BytesInTransfer++;
+ }
+ }
+
+ return ENDPOINT_RWSTREAM_NoError;
+}
+
+uint8_t Endpoint_Null_Stream(uint16_t Length,
+ uint16_t* const BytesProcessed)
+{
+ uint8_t ErrorCode;
+ uint16_t BytesInTransfer = 0;
+
+ if ((ErrorCode = Endpoint_WaitUntilReady()))
+ return ErrorCode;
+
+ if (BytesProcessed != NULL)
+ Length -= *BytesProcessed;
+
+ while (Length)
+ {
+ if (!(Endpoint_IsReadWriteAllowed()))
+ {
+ Endpoint_ClearIN();
+
+ if (BytesProcessed != NULL)
+ {
+ *BytesProcessed += BytesInTransfer;
+ return ENDPOINT_RWSTREAM_IncompleteTransfer;
+ }
+
+ if ((ErrorCode = Endpoint_WaitUntilReady()))
+ return ErrorCode;
+ }
+ else
+ {
+ Endpoint_Write_Byte(0);
+
+ Length--;
+ BytesInTransfer++;
+ }
+ }
+
+ return ENDPOINT_RWSTREAM_NoError;
+}
+
+#define TEMPLATE_FUNC_NAME Endpoint_Write_Stream_LE
+#define TEMPLATE_BUFFER_TYPE const void*
+#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(*BufferPtr)
+#include "Template/Template_Endpoint_RW.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Write_PStream_LE
+#define TEMPLATE_BUFFER_TYPE const void*
+#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(pgm_read_byte(BufferPtr))
+#include "Template/Template_Endpoint_RW.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Write_EStream_LE
+#define TEMPLATE_BUFFER_TYPE const void*
+#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(eeprom_read_byte(BufferPtr))
+#include "Template/Template_Endpoint_RW.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Write_Stream_BE
+#define TEMPLATE_BUFFER_TYPE const void*
+#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
+#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
+#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(*BufferPtr)
+#include "Template/Template_Endpoint_RW.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Write_EStream_BE
+#define TEMPLATE_BUFFER_TYPE const void*
+#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
+#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
+#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(eeprom_read_byte(BufferPtr))
+#include "Template/Template_Endpoint_RW.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Write_PStream_BE
+#define TEMPLATE_BUFFER_TYPE const void*
+#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
+#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
+#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(pgm_read_byte(BufferPtr))
+#include "Template/Template_Endpoint_RW.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Read_Stream_LE
+#define TEMPLATE_BUFFER_TYPE void*
+#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT()
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Endpoint_Read_Byte()
+#include "Template/Template_Endpoint_RW.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Read_EStream_LE
+#define TEMPLATE_BUFFER_TYPE void*
+#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT()
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Endpoint_Read_Byte())
+#include "Template/Template_Endpoint_RW.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Read_Stream_BE
+#define TEMPLATE_BUFFER_TYPE void*
+#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT()
+#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
+#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Endpoint_Read_Byte()
+#include "Template/Template_Endpoint_RW.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Read_EStream_BE
+#define TEMPLATE_BUFFER_TYPE void*
+#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT()
+#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
+#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Endpoint_Read_Byte())
+#include "Template/Template_Endpoint_RW.c"
+
+#endif
+
+#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_Stream_LE
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(*BufferPtr)
+#include "Template/Template_Endpoint_Control_W.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_PStream_LE
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(pgm_read_byte(BufferPtr))
+#include "Template/Template_Endpoint_Control_W.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_EStream_LE
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(eeprom_read_byte(BufferPtr))
+#include "Template/Template_Endpoint_Control_W.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_Stream_BE
+#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
+#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(*BufferPtr)
+#include "Template/Template_Endpoint_Control_W.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_PStream_BE
+#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
+#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(pgm_read_byte(BufferPtr))
+#include "Template/Template_Endpoint_Control_W.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_EStream_BE
+#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
+#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(eeprom_read_byte(BufferPtr))
+#include "Template/Template_Endpoint_Control_W.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Read_Control_Stream_LE
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Endpoint_Read_Byte()
+#include "Template/Template_Endpoint_Control_R.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Read_Control_EStream_LE
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Endpoint_Read_Byte())
+#include "Template/Template_Endpoint_Control_R.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Read_Control_Stream_BE
+#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
+#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Endpoint_Read_Byte()
+#include "Template/Template_Endpoint_Control_R.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Read_Control_EStream_BE
+#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
+#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Endpoint_Read_Byte())
+#include "Template/Template_Endpoint_Control_R.c"
+
+#endif diff --git a/LUFA/Drivers/USB/Core/EndpointStream.h b/LUFA/Drivers/USB/Core/EndpointStream.h new file mode 100644 index 000000000..4d4f33a20 --- /dev/null +++ b/LUFA/Drivers/USB/Core/EndpointStream.h @@ -0,0 +1,683 @@ +/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2011.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief USB device endpoint stream function definitions.
+ *
+ * This file contains structures, function prototypes and macros related to the sending and receiving of
+ * arbitrary data streams through the device's data endpoints when the library is initialized in USB device mode.
+ *
+ * \note This file should not be included directly. It is automatically included as needed by the USB driver
+ * dispatch header located in LUFA/Drivers/USB/USB.h.
+ */
+
+/** \ingroup Group_EndpointRW
+ * \defgroup Group_EndpointStreamRW Read/Write of Multi-Byte Streams
+ *
+ * Functions, macros, variables, enums and types related to data reading and writing of data streams from
+ * and to endpoints.
+ *
+ * @{
+ */
+
+#ifndef __ENDPOINT_STREAM_H__
+#define __ENDPOINT_STREAM_H__
+
+ /* Includes: */
+ #include "../../../Common/Common.h"
+ #include "USBTask.h"
+
+ /* Enable C linkage for C++ Compilers: */
+ #if defined(__cplusplus)
+ extern "C" {
+ #endif
+
+ /* Preprocessor Checks: */
+ #if !defined(__INCLUDE_FROM_USB_DRIVER)
+ #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
+ #endif
+
+ /* Public Interface - May be used in end-application: */
+ /* Enums: */
+ /** Enum for the possible error return codes of the \c Endpoint_*_Stream_* functions. */
+ enum Endpoint_Stream_RW_ErrorCodes_t
+ {
+ ENDPOINT_RWSTREAM_NoError = 0, /**< Command completed successfully, no error. */
+ ENDPOINT_RWSTREAM_EndpointStalled = 1, /**< The endpoint was stalled during the stream
+ * transfer by the host or device.
+ */
+ ENDPOINT_RWSTREAM_DeviceDisconnected = 2, /**< Device was disconnected from the host during
+ * the transfer.
+ */
+ ENDPOINT_RWSTREAM_BusSuspended = 3, /**< The USB bus has been suspended by the host and
+ * no USB endpoint traffic can occur until the bus
+ * has resumed.
+ */
+ ENDPOINT_RWSTREAM_Timeout = 4, /**< The host failed to accept or send the next packet
+ * within the software timeout period set by the
+ * \ref USB_STREAM_TIMEOUT_MS macro.
+ */
+ ENDPOINT_RWSTREAM_IncompleteTransfer = 5, /**< Indicates that the endpoint bank became full or empty before
+ * the complete contents of the current stream could be
+ * transferred. The endpoint stream function should be called
+ * again to process the next chunk of data in the transfer.
+ */
+ };
+
+ /** Enum for the possible error return codes of the \c Endpoint_*_Control_Stream_* functions. */
+ enum Endpoint_ControlStream_RW_ErrorCodes_t
+ {
+ ENDPOINT_RWCSTREAM_NoError = 0, /**< Command completed successfully, no error. */
+ ENDPOINT_RWCSTREAM_HostAborted = 1, /**< The aborted the transfer prematurely. */
+ ENDPOINT_RWCSTREAM_DeviceDisconnected = 2, /**< Device was disconnected from the host during
+ * the transfer.
+ */
+ ENDPOINT_RWCSTREAM_BusSuspended = 3, /**< The USB bus has been suspended by the host and
+ * no USB endpoint traffic can occur until the bus
+ * has resumed.
+ */
+ };
+
+ /* Function Prototypes: */
+
+ /** \name Stream functions for null data */
+ //@{
+
+ /** Reads and discards the given number of bytes from the currently selected endpoint's bank,
+ * discarding fully read packets from the host as needed. The last packet is not automatically
+ * discarded once the remaining bytes has been read; the user is responsible for manually
+ * discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro.
+ *
+ * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once,
+ * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid
+ * storage location, the transfer will instead be performed as a series of chunks. Each time
+ * the endpoint bank becomes empty while there is still data to process (and after the current
+ * packet has been acknowledged) the BytesProcessed location will be updated with the total number
+ * of bytes processed in the stream, and the function will exit with an error code of
+ * \ref ENDPOINT_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed
+ * in the user code - to continue the transfer, call the function again with identical parameters
+ * and it will resume until the BytesProcessed value reaches the total transfer length.
+ *
+ * <b>Single Stream Transfer Example:</b>
+ * \code
+ * uint8_t ErrorCode;
+ *
+ * if ((ErrorCode = Endpoint_Discard_Stream(512, NULL)) != ENDPOINT_RWSTREAM_NoError)
+ * {
+ * // Stream failed to complete - check ErrorCode here
+ * }
+ * \endcode
+ *
+ * <b>Partial Stream Transfers Example:</b>
+ * \code
+ * uint8_t ErrorCode;
+ * uint16_t BytesProcessed;
+ *
+ * BytesProcessed = 0;
+ * while ((ErrorCode = Endpoint_Discard_Stream(512, &BytesProcessed)) == ENDPOINT_RWSTREAM_IncompleteTransfer)
+ * {
+ * // Stream not yet complete - do other actions here, abort if required
+ * }
+ *
+ * if (ErrorCode != ENDPOINT_RWSTREAM_NoError)
+ * {
+ * // Stream failed to complete - check ErrorCode here
+ * }
+ * \endcode
+ *
+ * \note This routine should not be used on CONTROL type endpoints.
+ *
+ * \param[in] Length Number of bytes to discard via the currently selected endpoint.
+ * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
+ * transaction should be updated, \c NULL if the entire stream should be read at once.
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Discard_Stream(uint16_t Length,
+ uint16_t* const BytesProcessed);
+
+ /** Writes a given number of zeroed bytes to the currently selected endpoint's bank, sending
+ * full packets to the host as needed. The last packet is not automatically sent once the
+ * remaining bytes have been written; the user is responsible for manually sending the last
+ * packet to the host via the \ref Endpoint_ClearIN() macro.
+ *
+ * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once,
+ * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid
+ * storage location, the transfer will instead be performed as a series of chunks. Each time
+ * the endpoint bank becomes full while there is still data to process (and after the current
+ * packet transmission has been initiated) the BytesProcessed location will be updated with the
+ * total number of bytes processed in the stream, and the function will exit with an error code of
+ * \ref ENDPOINT_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed
+ * in the user code - to continue the transfer, call the function again with identical parameters
+ * and it will resume until the BytesProcessed value reaches the total transfer length.
+ *
+ * <b>Single Stream Transfer Example:</b>
+ * \code
+ * uint8_t ErrorCode;
+ *
+ * if ((ErrorCode = Endpoint_Null_Stream(512, NULL)) != ENDPOINT_RWSTREAM_NoError)
+ * {
+ * // Stream failed to complete - check ErrorCode here
+ * }
+ * \endcode
+ *
+ * <b>Partial Stream Transfers Example:</b>
+ * \code
+ * uint8_t ErrorCode;
+ * uint16_t BytesProcessed;
+ *
+ * BytesProcessed = 0;
+ * while ((ErrorCode = Endpoint_Null_Stream(512, &BytesProcessed)) == ENDPOINT_RWSTREAM_IncompleteTransfer)
+ * {
+ * // Stream not yet complete - do other actions here, abort if required
+ * }
+ *
+ * if (ErrorCode != ENDPOINT_RWSTREAM_NoError)
+ * {
+ * // Stream failed to complete - check ErrorCode here
+ * }
+ * \endcode
+ *
+ * \note This routine should not be used on CONTROL type endpoints.
+ *
+ * \param[in] Length Number of zero bytes to send via the currently selected endpoint.
+ * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
+ * transaction should be updated, \c NULL if the entire stream should be read at once.
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Null_Stream(uint16_t Length,
+ uint16_t* const BytesProcessed);
+
+ //@}
+
+ /** \name Stream functions for RAM source/destination data */
+ //@{
+
+ /** Writes the given number of bytes to the endpoint from the given buffer in little endian,
+ * sending full packets to the host as needed. The last packet filled is not automatically sent;
+ * the user is responsible for manually sending the last written packet to the host via the
+ * \ref Endpoint_ClearIN() macro.
+ *
+ * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once,
+ * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid
+ * storage location, the transfer will instead be performed as a series of chunks. Each time
+ * the endpoint bank becomes full while there is still data to process (and after the current
+ * packet transmission has been initiated) the BytesProcessed location will be updated with the
+ * total number of bytes processed in the stream, and the function will exit with an error code of
+ * \ref ENDPOINT_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed
+ * in the user code - to continue the transfer, call the function again with identical parameters
+ * and it will resume until the BytesProcessed value reaches the total transfer length.
+ *
+ * <b>Single Stream Transfer Example:</b>
+ * \code
+ * uint8_t DataStream[512];
+ * uint8_t ErrorCode;
+ *
+ * if ((ErrorCode = Endpoint_Write_Stream_LE(DataStream, sizeof(DataStream),
+ * NULL)) != ENDPOINT_RWSTREAM_NoError)
+ * {
+ * // Stream failed to complete - check ErrorCode here
+ * }
+ * \endcode
+ *
+ * <b>Partial Stream Transfers Example:</b>
+ * \code
+ * uint8_t DataStream[512];
+ * uint8_t ErrorCode;
+ * uint16_t BytesProcessed;
+ *
+ * BytesProcessed = 0;
+ * while ((ErrorCode = Endpoint_Write_Stream_LE(DataStream, sizeof(DataStream),
+ * &BytesProcessed)) == ENDPOINT_RWSTREAM_IncompleteTransfer)
+ * {
+ * // Stream not yet complete - do other actions here, abort if required
+ * }
+ *
+ * if (ErrorCode != ENDPOINT_RWSTREAM_NoError)
+ * {
+ * // Stream failed to complete - check ErrorCode here
+ * }
+ * \endcode
+ *
+ * \note This routine should not be used on CONTROL type endpoints.
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
+ * transaction should be updated, \c NULL if the entire stream should be written at once.
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_Stream_LE(const void* const Buffer,
+ uint16_t Length,
+ uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Writes the given number of bytes to the endpoint from the given buffer in big endian,
+ * sending full packets to the host as needed. The last packet filled is not automatically sent;
+ * the user is responsible for manually sending the last written packet to the host via the
+ * \ref Endpoint_ClearIN() macro.
+ *
+ * \note This routine should not be used on CONTROL type endpoints.
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
+ * transaction should be updated, \c NULL if the entire stream should be written at once.
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_Stream_BE(const void* const Buffer,
+ uint16_t Length,
+ uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Reads the given number of bytes from the endpoint from the given buffer in little endian,
+ * discarding fully read packets from the host as needed. The last packet is not automatically
+ * discarded once the remaining bytes has been read; the user is responsible for manually
+ * discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro.
+ *
+ * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once,
+ * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid
+ * storage location, the transfer will instead be performed as a series of chunks. Each time
+ * the endpoint bank becomes empty while there is still data to process (and after the current
+ * packet has been acknowledged) the BytesProcessed location will be updated with the total number
+ * of bytes processed in the stream, and the function will exit with an error code of
+ * \ref ENDPOINT_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed
+ * in the user code - to continue the transfer, call the function again with identical parameters
+ * and it will resume until the BytesProcessed value reaches the total transfer length.
+ *
+ * <b>Single Stream Transfer Example:</b>
+ * \code
+ * uint8_t DataStream[512];
+ * uint8_t ErrorCode;
+ *
+ * if ((ErrorCode = Endpoint_Read_Stream_LE(DataStream, sizeof(DataStream),
+ * NULL)) != ENDPOINT_RWSTREAM_NoError)
+ * {
+ * // Stream failed to complete - check ErrorCode here
+ * }
+ * \endcode
+ *
+ * <b>Partial Stream Transfers Example:</b>
+ * \code
+ * uint8_t DataStream[512];
+ * uint8_t ErrorCode;
+ * uint16_t BytesProcessed;
+ *
+ * BytesProcessed = 0;
+ * while ((ErrorCode = Endpoint_Read_Stream_LE(DataStream, sizeof(DataStream),
+ * &BytesProcessed)) == ENDPOINT_RWSTREAM_IncompleteTransfer)
+ * {
+ * // Stream not yet complete - do other actions here, abort if required
+ * }
+ *
+ * if (ErrorCode != ENDPOINT_RWSTREAM_NoError)
+ * {
+ * // Stream failed to complete - check ErrorCode here
+ * }
+ * \endcode
+ *
+ * \note This routine should not be used on CONTROL type endpoints.
+ *
+ * \param[out] Buffer Pointer to the destination data buffer to write to.
+ * \param[in] Length Number of bytes to send via the currently selected endpoint.
+ * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
+ * transaction should be updated, \c NULL if the entire stream should be read at once.
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Read_Stream_LE(void* const Buffer,
+ uint16_t Length,
+ uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Reads the given number of bytes from the endpoint from the given buffer in big endian,
+ * discarding fully read packets from the host as needed. The last packet is not automatically
+ * discarded once the remaining bytes has been read; the user is responsible for manually
+ * discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro.
+ *
+ * \note This routine should not be used on CONTROL type endpoints.
+ *
+ * \param[out] Buffer Pointer to the destination data buffer to write to.
+ * \param[in] Length Number of bytes to send via the currently selected endpoint.
+ * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
+ * transaction should be updated, \c NULL if the entire stream should be read at once.
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Read_Stream_BE(void* const Buffer,
+ uint16_t Length,
+ uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in little endian,
+ * sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared
+ * in both failure and success states; the user is responsible for manually clearing the setup OUT to
+ * finalize the transfer via the \ref Endpoint_ClearOUT() macro.
+ *
+ * \note This function automatically clears the control transfer's status stage. Do not manually attempt
+ * to clear the status stage when using this routine in a control transaction.
+ * \n\n
+ *
+ * \note This routine should only be used on CONTROL type endpoints.
+ *
+ * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
+ * together; i.e. the entire stream data must be read or written at the one time.
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ *
+ * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_Control_Stream_LE(const void* const Buffer,
+ uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in big endian,
+ * sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared
+ * in both failure and success states; the user is responsible for manually clearing the setup OUT to
+ * finalize the transfer via the \ref Endpoint_ClearOUT() macro.
+ *
+ * \note This function automatically clears the control transfer's status stage. Do not manually attempt
+ * to clear the status stage when using this routine in a control transaction.
+ * \n\n
+ *
+ * \note This routine should only be used on CONTROL type endpoints.
+ *
+ * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
+ * together; i.e. the entire stream data must be read or written at the one time.
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ *
+ * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_Control_Stream_BE(const void* const Buffer,
+ uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Reads the given number of bytes from the CONTROL endpoint from the given buffer in little endian,
+ * discarding fully read packets from the host as needed. The device IN acknowledgement is not
+ * automatically sent after success or failure states; the user is responsible for manually sending the
+ * setup IN to finalize the transfer via the \ref Endpoint_ClearIN() macro.
+ *
+ * \note This function automatically clears the control transfer's status stage. Do not manually attempt
+ * to clear the status stage when using this routine in a control transaction.
+ * \n\n
+ *
+ * \note This routine should only be used on CONTROL type endpoints.
+ *
+ * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
+ * together; i.e. the entire stream data must be read or written at the one time.
+ *
+ * \param[out] Buffer Pointer to the destination data buffer to write to.
+ * \param[in] Length Number of bytes to send via the currently selected endpoint.
+ *
+ * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Read_Control_Stream_LE(void* const Buffer,
+ uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Reads the given number of bytes from the CONTROL endpoint from the given buffer in big endian,
+ * discarding fully read packets from the host as needed. The device IN acknowledgement is not
+ * automatically sent after success or failure states; the user is responsible for manually sending the
+ * setup IN to finalize the transfer via the \ref Endpoint_ClearIN() macro.
+ *
+ * \note This function automatically clears the control transfer's status stage. Do not manually attempt
+ * to clear the status stage when using this routine in a control transaction.
+ * \n\n
+ *
+ * \note This routine should only be used on CONTROL type endpoints.
+ *
+ * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
+ * together; i.e. the entire stream data must be read or written at the one time.
+ *
+ * \param[out] Buffer Pointer to the destination data buffer to write to.
+ * \param[in] Length Number of bytes to send via the currently selected endpoint.
+ *
+ * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Read_Control_Stream_BE(void* const Buffer,
+ uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+ //@}
+
+ /** \name Stream functions for EEPROM source/destination data */
+ //@{
+
+ /** EEPROM buffer source version of \ref Endpoint_Write_Stream_LE().
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
+ * transaction should be updated, \c NULL if the entire stream should be written at once.
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_EStream_LE(const void* const Buffer,
+ uint16_t Length,
+ uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** EEPROM buffer source version of \ref Endpoint_Write_Stream_BE().
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
+ * transaction should be updated, \c NULL if the entire stream should be written at once.
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_EStream_BE(const void* const Buffer,
+ uint16_t Length,
+ uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** EEPROM buffer source version of \ref Endpoint_Read_Stream_LE().
+ *
+ * \param[out] Buffer Pointer to the destination data buffer to write to, located in EEPROM memory space.
+ * \param[in] Length Number of bytes to send via the currently selected endpoint.
+ * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
+ * transaction should be updated, \c NULL if the entire stream should be read at once.
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Read_EStream_LE(void* const Buffer,
+ uint16_t Length,
+ uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** EEPROM buffer source version of \ref Endpoint_Read_Stream_BE().
+ *
+ * \param[out] Buffer Pointer to the destination data buffer to write to, located in EEPROM memory space.
+ * \param[in] Length Number of bytes to send via the currently selected endpoint.
+ * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
+ * transaction should be updated, \c NULL if the entire stream should be read at once.
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Read_EStream_BE(void* const Buffer,
+ uint16_t Length,
+ uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** EEPROM buffer source version of Endpoint_Write_Control_Stream_LE.
+ *
+ * \note This function automatically clears the control transfer's status stage. Do not manually attempt
+ * to clear the status stage when using this routine in a control transaction.
+ * \n\n
+ *
+ * \note This routine should only be used on CONTROL type endpoints.
+ *
+ * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
+ * together; i.e. the entire stream data must be read or written at the one time.
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ *
+ * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_Control_EStream_LE(const void* const Buffer,
+ uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** EEPROM buffer source version of \ref Endpoint_Write_Control_Stream_BE().
+ *
+ * \note This function automatically clears the control transfer's status stage. Do not manually attempt
+ * to clear the status stage when using this routine in a control transaction.
+ * \n\n
+ *
+ * \note This routine should only be used on CONTROL type endpoints.
+ *
+ * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
+ * together; i.e. the entire stream data must be read or written at the one time.
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ *
+ * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_Control_EStream_BE(const void* const Buffer,
+ uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** EEPROM buffer source version of \ref Endpoint_Read_Control_Stream_LE().
+ *
+ * \note This function automatically clears the control transfer's status stage. Do not manually attempt
+ * to clear the status stage when using this routine in a control transaction.
+ * \n\n
+ *
+ * \note This routine should only be used on CONTROL type endpoints.
+ *
+ * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
+ * together; i.e. the entire stream data must be read or written at the one time.
+ *
+ * \param[out] Buffer Pointer to the destination data buffer to write to.
+ * \param[in] Length Number of bytes to send via the currently selected endpoint.
+ *
+ * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Read_Control_EStream_LE(void* const Buffer,
+ uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** EEPROM buffer source version of \ref Endpoint_Read_Control_Stream_BE().
+ *
+ * \note This function automatically clears the control transfer's status stage. Do not manually attempt
+ * to clear the status stage when using this routine in a control transaction.
+ * \n\n
+ *
+ * \note This routine should only be used on CONTROL type endpoints.
+ *
+ * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
+ * together; i.e. the entire stream data must be read or written at the one time.
+ *
+ * \param[out] Buffer Pointer to the destination data buffer to write to.
+ * \param[in] Length Number of bytes to send via the currently selected endpoint.
+ *
+ * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Read_Control_EStream_BE(void* const Buffer,
+ uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+ //@}
+
+ /** \name Stream functions for PROGMEM source/destination data */
+ //@{
+
+ /** FLASH buffer source version of \ref Endpoint_Write_Stream_LE().
+ *
+ * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
+ * transaction should be updated, \c NULL if the entire stream should be written at once.
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_PStream_LE(const void* const Buffer,
+ uint16_t Length,
+ uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** FLASH buffer source version of \ref Endpoint_Write_Stream_BE().
+ *
+ * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
+ * transaction should be updated, \c NULL if the entire stream should be written at once.
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_PStream_BE(const void* const Buffer,
+ uint16_t Length,
+ uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** FLASH buffer source version of \ref Endpoint_Write_Control_Stream_LE().
+ *
+ * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
+ *
+ * \note This function automatically clears the control transfer's status stage. Do not manually attempt
+ * to clear the status stage when using this routine in a control transaction.
+ * \n\n
+ *
+ * \note This routine should only be used on CONTROL type endpoints.
+ *
+ * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
+ * together; i.e. the entire stream data must be read or written at the one time.
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ *
+ * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_Control_PStream_LE(const void* const Buffer,
+ uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** FLASH buffer source version of \ref Endpoint_Write_Control_Stream_BE().
+ *
+ * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
+ *
+ * \note This function automatically clears the control transfer's status stage. Do not manually attempt
+ * to clear the status stage when using this routine in a control transaction.
+ * \n\n
+ *
+ * \note This routine should only be used on CONTROL type endpoints.
+ *
+ * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
+ * together; i.e. the entire stream data must be read or written at the one time.
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ *
+ * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_Control_PStream_BE(const void* const Buffer,
+ uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+ //@}
+
+ /* Disable C linkage for C++ Compilers: */
+ #if defined(__cplusplus)
+ }
+ #endif
+
+#endif
+
+/** @} */
+ diff --git a/LUFA/Drivers/USB/Core/Events.c b/LUFA/Drivers/USB/Core/Events.c new file mode 100644 index 000000000..cd340fbba --- /dev/null +++ b/LUFA/Drivers/USB/Core/Events.c @@ -0,0 +1,39 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#define __INCLUDE_FROM_EVENTS_C +#define __INCLUDE_FROM_USB_DRIVER +#include "Events.h" + +void USB_Event_Stub(void) +{ + +} + diff --git a/LUFA/Drivers/USB/Core/Events.h b/LUFA/Drivers/USB/Core/Events.h new file mode 100644 index 000000000..4a3a1a160 --- /dev/null +++ b/LUFA/Drivers/USB/Core/Events.h @@ -0,0 +1,376 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB controller events manager. + * + * This file contains macros and functions relating to the management of library events, which are small + * pieces of code similar to ISRs which are run when a given condition is met. Each event can be fired from + * multiple places in the user or library code, which may or may not be inside an ISR, thus each handler + * should be written to be as small and fast as possible to prevent possible problems. + * + * Events can be hooked by the user application by declaring a handler function with the same name and parameters + * listed here. If an event with no user-associated handler is fired within the library, it by default maps to an + * internal empty stub function. + * + * Each event must only have one associated event handler, but can be raised by multiple sources by calling the + * event handler function (with any required event parameters). + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_USB + * \defgroup Group_Events USB Events + * + * This module contains macros and functions relating to the management of library events, which are small + * pieces of code similar to ISRs which are run when a given condition is met. Each event can be fired from + * multiple places in the user or library code, which may or may not be inside an ISR, thus each handler + * should be written to be as small and fast as possible to prevent possible problems. + * + * Events can be hooked by the user application by declaring a handler function with the same name and parameters + * listed here. If an event with no user-associated handler is fired within the library, it by default maps to an + * internal empty stub function. + * + * Each event must only have one associated event handler, but can be raised by multiple sources by calling the + * event handler function (with any required event parameters). + * + * @{ + */ + +#ifndef __USBEVENTS_H__ +#define __USBEVENTS_H__ + + /* Includes: */ + #include "../../../Common/Common.h" + #include "USBMode.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Pseudo-Functions for Doxygen: */ + #if !defined(__INCLUDE_FROM_EVENTS_C) || defined(__DOXYGEN__) + /** Event for USB mode pin level change. This event fires when the USB interface is set to dual role + * mode, and the UID pin level has changed to indicate a new mode (device or host). This event fires + * before the mode is switched to the newly indicated mode but after the \ref EVENT_USB_Device_Disconnect + * event has fired (if connected before the role change). + * + * \note This event only exists on microcontrollers that support dual role USB modes. + * \n\n + * + * \note This event does not exist if the \c USB_DEVICE_ONLY or \c USB_HOST_ONLY tokens have been supplied + * to the compiler (see \ref Group_USBManagement documentation). + */ + void EVENT_USB_UIDChange(void); + + /** Event for USB host error. This event fires when a hardware fault has occurred whilst the USB + * interface is in host mode. + * + * \param[in] ErrorCode Error code indicating the failure reason, a value in \ref USB_Host_ErrorCodes_t. + * + * \note This event only exists on microcontrollers that supports USB host mode. + * \n\n + * + * \note This event does not exist if the \c USB_DEVICE_ONLY token is supplied to the compiler (see + * \ref Group_USBManagement documentation). + */ + void EVENT_USB_Host_HostError(const uint8_t ErrorCode); + + /** Event for USB device attachment. This event fires when a the USB interface is in host mode, and + * a USB device has been connected to the USB interface. This is interrupt driven, thus fires before + * the standard \ref EVENT_USB_Device_Connect() event and so can be used to programmatically start the USB + * management task to reduce CPU consumption. + * + * \note This event only exists on microcontrollers that supports USB host mode. + * \n\n + * + * \note This event does not exist if the \c USB_DEVICE_ONLY token is supplied to the compiler (see + * \ref Group_USBManagement documentation). + * + * \see \ref USB_USBTask() for more information on the USB management task and reducing CPU usage. + */ + void EVENT_USB_Host_DeviceAttached(void); + + /** Event for USB device removal. This event fires when a the USB interface is in host mode, and + * a USB device has been removed the USB interface whether or not it has been enumerated. This + * can be used to programmatically stop the USB management task to reduce CPU consumption. + * + * \note This event only exists on microcontrollers that supports USB host mode. + * \n\n + * + * \note This event does not exist if the \c USB_DEVICE_ONLY token is supplied to the compiler (see + * \ref Group_USBManagement documentation). + * + * \see \ref USB_USBTask() for more information on the USB management task and reducing CPU usage. + */ + void EVENT_USB_Host_DeviceUnattached(void); + + /** Event for USB device enumeration failure. This event fires when a the USB interface is + * in host mode, and an attached USB device has failed to enumerate completely. + * + * \param[in] ErrorCode Error code indicating the failure reason, a value in + * \ref USB_Host_EnumerationErrorCodes_t. + * + * \param[in] SubErrorCode Sub error code indicating the reason for failure - for example, if the + * ErrorCode parameter indicates a control error, this will give the error + * code returned by the \ref USB_Host_SendControlRequest() function. + * + * \note This event only exists on microcontrollers that supports USB host mode. + * \n\n + * + * \note This event does not exist if the \c USB_DEVICE_ONLY token is supplied to the compiler (see + * \ref Group_USBManagement documentation). + */ + void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, + const uint8_t SubErrorCode); + + /** Event for USB device enumeration completion. This event fires when a the USB interface is + * in host mode and an attached USB device has been completely enumerated and is ready to be + * controlled by the user application. + * + * This event is time-critical; exceeding OS-specific delays within this event handler (typically of around + * 1 second) when a transaction is waiting to be processed by the device will prevent break communications + * and cause the host to reset the USB bus. + */ + void EVENT_USB_Host_DeviceEnumerationComplete(void); + + /** Event for USB Start Of Frame detection, when enabled. This event fires at the start of each USB + * frame, once per millisecond, and is synchronized to the USB bus. This can be used as an accurate + * millisecond timer source when the USB bus is not suspended while in host mode. + * + * This event is time-critical; it is run once per millisecond and thus long handlers will significantly + * degrade device performance. This event should only be enabled when needed to reduce device wake-ups. + * + * \note This event is not normally active - it must be manually enabled and disabled via the + * \ref USB_Host_EnableSOFEvents() and \ref USB_Host_DisableSOFEvents() commands after enumeration of + * a USB device. + * \n\n + * + * \note This event does not exist if the \c USB_DEVICE_ONLY token is supplied to the compiler (see + * \ref Group_USBManagement documentation). + */ + void EVENT_USB_Host_StartOfFrame(void); + + /** Event for USB device connection. This event fires when the microcontroller is in USB Device mode + * and the device is connected to a USB host, beginning the enumeration process measured by a rising + * level on the microcontroller's VBUS sense pin. + * + * This event is time-critical; exceeding OS-specific delays within this event handler (typically of around + * two seconds) will prevent the device from enumerating correctly. + * + * \note For the smaller series 2 USB AVRs with limited USB controllers, VBUS is not available to the USB controller. + * this means that the current connection state is derived from the bus suspension and wake up events by default, + * which is not always accurate (host may suspend the bus while still connected). If the actual connection state + * needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by + * passing the \c NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection + * and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually. + * \n\n + * + * \note This event may fire multiple times during device enumeration on the microcontrollers with limited USB controllers + * if \c NO_LIMITED_CONTROLLER_CONNECT is not defined. + * + * \see \ref Group_USBManagement for more information on the USB management task and reducing CPU usage. + */ + void EVENT_USB_Device_Connect(void); + + /** Event for USB device disconnection. This event fires when the microcontroller is in USB Device mode and the device is + * disconnected from a host, measured by a falling level on the microcontroller's VBUS sense pin. + * + * \note For the microcontrollers with limited USB controllers, VBUS sense is not available to the USB controller. + * this means that the current connection state is derived from the bus suspension and wake up events by default, + * which is not always accurate (host may suspend the bus while still connected). If the actual connection state + * needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by + * passing the \c NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection + * and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually. + * \n\n + * + * \note This event may fire multiple times during device enumeration on the microcontrollers with limited USB controllers + * if \c NO_LIMITED_CONTROLLER_CONNECT is not defined. + * + * \see \ref Group_USBManagement for more information on the USB management task and reducing CPU usage. + */ + void EVENT_USB_Device_Disconnect(void); + + /** Event for control requests. This event fires when a the USB host issues a control request + * to the mandatory device control endpoint (of address 0). This may either be a standard + * request that the library may have a handler code for internally, or a class specific request + * issued to the device which must be handled appropriately. If a request is not processed in the + * user application via this event, it will be passed to the library for processing internally + * if a suitable handler exists. + * + * This event is time-critical; each packet within the request transaction must be acknowledged or + * sent within 50ms or the host will abort the transfer. + * + * The library internally handles all standard control requests with the exceptions of SYNC FRAME, + * SET DESCRIPTOR and SET INTERFACE. These and all other non-standard control requests will be left + * for the user to process via this event if desired. If not handled in the user application or by + * the library internally, unknown requests are automatically STALLed. + * + * \note This event does not exist if the \c USB_HOST_ONLY token is supplied to the compiler (see + * \ref Group_USBManagement documentation). + * \n\n + * + * \note Requests should be handled in the same manner as described in the USB 2.0 Specification, + * or appropriate class specification. In all instances, the library has already read the + * request SETUP parameters into the \ref USB_ControlRequest structure which should then be used + * by the application to determine how to handle the issued request. + */ + void EVENT_USB_Device_ControlRequest(void); + + /** Event for USB configuration number changed. This event fires when a the USB host changes the + * selected configuration number while in device mode. This event should be hooked in device + * applications to create the endpoints and configure the device for the selected configuration. + * + * This event is time-critical; exceeding OS-specific delays within this event handler (typically of around + * one second) will prevent the device from enumerating correctly. + * + * This event fires after the value of \ref USB_ConfigurationNumber has been changed. + * + * \note This event does not exist if the \c USB_HOST_ONLY token is supplied to the compiler (see + * \ref Group_USBManagement documentation). + */ + void EVENT_USB_Device_ConfigurationChanged(void); + + /** Event for USB suspend. This event fires when a the USB host suspends the device by halting its + * transmission of Start Of Frame pulses to the device. This is generally hooked in order to move + * the device over to a low power state until the host wakes up the device. If the USB interface is + * enumerated with the \ref USB_OPT_AUTO_PLL option set, the library will automatically suspend the + * USB PLL before the event is fired to save power. + * + * \note This event does not exist if the \c USB_HOST_ONLY token is supplied to the compiler (see + * \ref Group_USBManagement documentation). + * \n\n + * + * \note This event does not exist on the microcontrollers with limited USB VBUS sensing abilities + * when the \c NO_LIMITED_CONTROLLER_CONNECT compile time token is not set - see + * \ref EVENT_USB_Device_Disconnect. + * + * \see \ref EVENT_USB_Device_WakeUp() event for accompanying Wake Up event. + */ + void EVENT_USB_Device_Suspend(void); + + /** Event for USB wake up. This event fires when a the USB interface is suspended while in device + * mode, and the host wakes up the device by supplying Start Of Frame pulses. This is generally + * hooked to pull the user application out of a low power state and back into normal operating + * mode. If the USB interface is enumerated with the \ref USB_OPT_AUTO_PLL option set, the library + * will automatically restart the USB PLL before the event is fired. + * + * \note This event does not exist if the \c USB_HOST_ONLY token is supplied to the compiler (see + * \ref Group_USBManagement documentation). + * \n\n + * + * \note This event does not exist on the microcontrollers with limited USB VBUS sensing abilities + * when the \c NO_LIMITED_CONTROLLER_CONNECT compile time token is not set - see + * \ref EVENT_USB_Device_Disconnect. + * + * \see \ref EVENT_USB_Device_Suspend() event for accompanying Suspend event. + */ + void EVENT_USB_Device_WakeUp(void); + + /** Event for USB interface reset. This event fires when the USB interface is in device mode, and + * a the USB host requests that the device reset its interface. This event fires after the control + * endpoint has been automatically configured by the library. + * + * This event is time-critical; exceeding OS-specific delays within this event handler (typically of around + * two seconds) will prevent the device from enumerating correctly. + * + * \note This event does not exist if the \c USB_HOST_ONLY token is supplied to the compiler (see + * \ref Group_USBManagement documentation). + */ + void EVENT_USB_Device_Reset(void); + + /** Event for USB Start Of Frame detection, when enabled. This event fires at the start of each USB + * frame, once per millisecond, and is synchronized to the USB bus. This can be used as an accurate + * millisecond timer source when the USB bus is enumerated in device mode to a USB host. + * + * This event is time-critical; it is run once per millisecond and thus long handlers will significantly + * degrade device performance. This event should only be enabled when needed to reduce device wake-ups. + * + * \pre This event is not normally active - it must be manually enabled and disabled via the + * \ref USB_Device_EnableSOFEvents() and \ref USB_Device_DisableSOFEvents() commands after enumeration. + * \n\n + * + * \note This event does not exist if the \c USB_HOST_ONLY token is supplied to the compiler (see + * \ref Group_USBManagement documentation). + */ + void EVENT_USB_Device_StartOfFrame(void); + #endif + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Function Prototypes: */ + #if defined(__INCLUDE_FROM_EVENTS_C) + void USB_Event_Stub(void) ATTR_CONST; + + #if defined(USB_CAN_BE_BOTH) + void EVENT_USB_UIDChange(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + #endif + + #if defined(USB_CAN_BE_HOST) + void EVENT_USB_Host_HostError(const uint8_t ErrorCode) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + void EVENT_USB_Host_DeviceAttached(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + void EVENT_USB_Host_DeviceUnattached(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + void EVENT_USB_Host_DeviceEnumerationComplete(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, + const uint8_t SubErrorCode) + ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + void EVENT_USB_Host_StartOfFrame(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + #endif + + #if defined(USB_CAN_BE_DEVICE) + void EVENT_USB_Device_Connect(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + void EVENT_USB_Device_Disconnect(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + void EVENT_USB_Device_ControlRequest(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + void EVENT_USB_Device_ConfigurationChanged(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + void EVENT_USB_Device_Suspend(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + void EVENT_USB_Device_WakeUp(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + void EVENT_USB_Device_Reset(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + void EVENT_USB_Device_StartOfFrame(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub); + #endif + #endif + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/LUFA/Drivers/USB/Core/Host.h b/LUFA/Drivers/USB/Core/Host.h new file mode 100644 index 000000000..8a6ac438d --- /dev/null +++ b/LUFA/Drivers/USB/Core/Host.h @@ -0,0 +1,68 @@ +/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2011.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief USB host mode definitions.
+ *
+ * USB Host mode related macros and enums. This module contains macros and enums which are used when
+ * the USB controller is initialized in host mode.
+ *
+ * \note This file should not be included directly. It is automatically included as needed by the USB driver
+ * dispatch header located in LUFA/Drivers/USB/USB.h.
+ */
+
+/** \ingroup Group_USB
+ * \defgroup Group_Host Host Management
+ *
+ * USB Host mode related macros and enums. This module contains macros and enums which are used when
+ * the USB controller is initialized in host mode.
+ *
+ * @{
+ */
+
+#ifndef __USBHOST_H__
+#define __USBHOST_H__
+
+ /* Includes: */
+ #include "../../../Common/Common.h"
+
+ #if (ARCH == ARCH_AVR8)
+ #include "AVR8/Host.h"
+ #endif
+
+ /* Preprocessor Checks: */
+ #if !defined(__INCLUDE_FROM_USB_DRIVER)
+ #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
+ #endif
+
+#endif
+
+/** @} */
+
diff --git a/LUFA/Drivers/USB/Core/HostStandardReq.c b/LUFA/Drivers/USB/Core/HostStandardReq.c new file mode 100644 index 000000000..16d0ffb17 --- /dev/null +++ b/LUFA/Drivers/USB/Core/HostStandardReq.c @@ -0,0 +1,180 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#define __INCLUDE_FROM_USB_DRIVER +#include "USBMode.h" + +#if defined(USB_CAN_BE_HOST) + +#define __INCLUDE_FROM_HOSTSTDREQ_C +#include "HostStandardReq.h" + +uint8_t USB_Host_SendControlRequest(void* const BufferPtr) +{ + uint8_t* HeaderStream = (uint8_t*)&USB_ControlRequest; + uint8_t* DataStream = (uint8_t*)BufferPtr; + bool BusSuspended = USB_Host_IsBusSuspended(); + uint8_t ReturnStatus = HOST_SENDCONTROL_Successful; + uint16_t DataLen = USB_ControlRequest.wLength; + + USB_Host_ResumeBus(); + + if ((ReturnStatus = USB_Host_WaitMS(1)) != HOST_WAITERROR_Successful) + goto End_Of_Control_Send; + + Pipe_SetPipeToken(PIPE_TOKEN_SETUP); + Pipe_ClearErrorFlags(); + + Pipe_Unfreeze(); + + for (uint8_t HeaderByte = 0; HeaderByte < sizeof(USB_Request_Header_t); HeaderByte++) + Pipe_Write_Byte(*(HeaderStream++)); + + Pipe_ClearSETUP(); + + if ((ReturnStatus = USB_Host_WaitForIOS(USB_HOST_WAITFOR_SetupSent)) != HOST_SENDCONTROL_Successful) + goto End_Of_Control_Send; + + Pipe_Freeze(); + + if ((ReturnStatus = USB_Host_WaitMS(1)) != HOST_WAITERROR_Successful) + goto End_Of_Control_Send; + + if ((USB_ControlRequest.bmRequestType & CONTROL_REQTYPE_DIRECTION) == REQDIR_DEVICETOHOST) + { + Pipe_SetPipeToken(PIPE_TOKEN_IN); + + if (DataStream != NULL) + { + while (DataLen) + { + Pipe_Unfreeze(); + + if ((ReturnStatus = USB_Host_WaitForIOS(USB_HOST_WAITFOR_InReceived)) != HOST_SENDCONTROL_Successful) + goto End_Of_Control_Send; + + if (!(Pipe_BytesInPipe())) + DataLen = 0; + + while (Pipe_BytesInPipe() && DataLen) + { + *(DataStream++) = Pipe_Read_Byte(); + DataLen--; + } + + Pipe_Freeze(); + Pipe_ClearIN(); + } + } + + Pipe_SetPipeToken(PIPE_TOKEN_OUT); + Pipe_Unfreeze(); + + if ((ReturnStatus = USB_Host_WaitForIOS(USB_HOST_WAITFOR_OutReady)) != HOST_SENDCONTROL_Successful) + goto End_Of_Control_Send; + + Pipe_ClearOUT(); + + if ((ReturnStatus = USB_Host_WaitForIOS(USB_HOST_WAITFOR_OutReady)) != HOST_SENDCONTROL_Successful) + goto End_Of_Control_Send; + } + else + { + if (DataStream != NULL) + { + Pipe_SetPipeToken(PIPE_TOKEN_OUT); + Pipe_Unfreeze(); + + while (DataLen) + { + if ((ReturnStatus = USB_Host_WaitForIOS(USB_HOST_WAITFOR_OutReady)) != HOST_SENDCONTROL_Successful) + goto End_Of_Control_Send; + + while (DataLen && (Pipe_BytesInPipe() < USB_ControlPipeSize)) + { + Pipe_Write_Byte(*(DataStream++)); + DataLen--; + } + + Pipe_ClearOUT(); + } + + if ((ReturnStatus = USB_Host_WaitForIOS(USB_HOST_WAITFOR_OutReady)) != HOST_SENDCONTROL_Successful) + goto End_Of_Control_Send; + + Pipe_Freeze(); + } + + Pipe_SetPipeToken(PIPE_TOKEN_IN); + Pipe_Unfreeze(); + + if ((ReturnStatus = USB_Host_WaitForIOS(USB_HOST_WAITFOR_InReceived)) != HOST_SENDCONTROL_Successful) + goto End_Of_Control_Send; + + Pipe_ClearIN(); + } + +End_Of_Control_Send: + Pipe_Freeze(); + + if (BusSuspended) + USB_Host_SuspendBus(); + + Pipe_ResetPipe(PIPE_CONTROLPIPE); + + return ReturnStatus; +} + +static uint8_t USB_Host_WaitForIOS(const uint8_t WaitType) +{ + #if (USB_HOST_TIMEOUT_MS < 0xFF) + uint8_t TimeoutCounter = USB_HOST_TIMEOUT_MS; + #else + uint16_t TimeoutCounter = USB_HOST_TIMEOUT_MS; + #endif + + while (!(((WaitType == USB_HOST_WAITFOR_SetupSent) && Pipe_IsSETUPSent()) || + ((WaitType == USB_HOST_WAITFOR_InReceived) && Pipe_IsINReceived()) || + ((WaitType == USB_HOST_WAITFOR_OutReady) && Pipe_IsOUTReady()))) + { + uint8_t ErrorCode; + + if ((ErrorCode = USB_Host_WaitMS(1)) != HOST_WAITERROR_Successful) + return ErrorCode; + + if (!(TimeoutCounter--)) + return HOST_SENDCONTROL_SoftwareTimeOut; + } + + return HOST_SENDCONTROL_Successful; +} + +#endif + diff --git a/LUFA/Drivers/USB/Core/HostStandardReq.h b/LUFA/Drivers/USB/Core/HostStandardReq.h new file mode 100644 index 000000000..46822221c --- /dev/null +++ b/LUFA/Drivers/USB/Core/HostStandardReq.h @@ -0,0 +1,116 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB host standard request management. + * + * This file contains the function prototypes necessary for the issuing of outgoing standard control requests + * when the library is in USB host mode. + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +#ifndef __HOSTSTDREQ_H__ +#define __HOSTSTDREQ_H__ + + /* Includes: */ + #include "../../../Common/Common.h" + #include "USBMode.h" + #include "StdRequestType.h" + #include "USBController.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Enums: */ + /** Enum for the \ref USB_Host_SendControlRequest() return code, indicating the reason for the error + * if the transfer of the request is unsuccessful. + * + * \ingroup Group_PipeControlReq + */ + enum USB_Host_SendControlErrorCodes_t + { + HOST_SENDCONTROL_Successful = 0, /**< No error occurred in the request transfer. */ + HOST_SENDCONTROL_DeviceDisconnected = 1, /**< The attached device was disconnected during the + * request transfer. + */ + HOST_SENDCONTROL_PipeError = 2, /**< An error occurred in the pipe while sending the request. */ + HOST_SENDCONTROL_SetupStalled = 3, /**< The attached device stalled the request, usually + * indicating that the request is unsupported on the device. + */ + HOST_SENDCONTROL_SoftwareTimeOut = 4, /**< The request or data transfer timed out. */ + }; + + /* Function Prototypes: */ + /** Sends the request stored in the \ref USB_ControlRequest global structure to the attached device, + * and transfers the data stored in the buffer to the device, or from the device to the buffer + * as requested. The transfer is made on the currently selected pipe. + * + * \ingroup Group_PipeControlReq + * + * \param[in] BufferPtr Pointer to the start of the data buffer if the request has a data stage, or + * \c NULL if the request transfers no data to or from the device. + * + * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum to indicate the result. + */ + uint8_t USB_Host_SendControlRequest(void* const BufferPtr); + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Enums: */ + enum USB_WaitForTypes_t + { + USB_HOST_WAITFOR_SetupSent, + USB_HOST_WAITFOR_InReceived, + USB_HOST_WAITFOR_OutReady, + }; + + /* Function Prototypes: */ + #if defined(__INCLUDE_FROM_HOSTSTDREQ_C) + static uint8_t USB_Host_WaitForIOS(const uint8_t WaitType); + #endif + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + diff --git a/LUFA/Drivers/USB/Core/OTG.h b/LUFA/Drivers/USB/Core/OTG.h new file mode 100644 index 000000000..3b41a0fe6 --- /dev/null +++ b/LUFA/Drivers/USB/Core/OTG.h @@ -0,0 +1,69 @@ +/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2011.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief USB OTG mode definitions.
+ *
+ * This file contains structures, function prototypes and macros related to USB OTG mode, where two USB devices
+ * may be linked directly together and exchange host/device roles as needed.
+ *
+ * \note This file should not be included directly. It is automatically included as needed by the USB driver
+ * dispatch header located in LUFA/Drivers/USB/USB.h.
+ */
+
+/** \ingroup Group_USB
+ * \defgroup Group_OTG USB On The Go (OTG) Management
+ *
+ * This module contains macros for embedded USB hosts with dual role On The Go capabilities, for managing role
+ * exchange. OTG is a way for two USB dual role devices to talk to one another directly without fixed device/host
+ * roles.
+ *
+ * @{
+ */
+
+#ifndef __USBOTG_H__
+#define __USBOTG_H__
+
+ /* Includes: */
+ #include "../../../Common/Common.h"
+
+ #if (ARCH == ARCH_AVR8)
+ #include "AVR8/OTG.h"
+ #endif
+
+ /* Preprocessor Checks: */
+ #if !defined(__INCLUDE_FROM_USB_DRIVER)
+ #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
+ #endif
+
+#endif
+
+/** @} */
+
diff --git a/LUFA/Drivers/USB/Core/Pipe.h b/LUFA/Drivers/USB/Core/Pipe.h new file mode 100644 index 000000000..2ab14fc6c --- /dev/null +++ b/LUFA/Drivers/USB/Core/Pipe.h @@ -0,0 +1,97 @@ +/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2011.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief USB host pipe management definitions.
+ *
+ * This file contains structures, function prototypes and macros related to the management of the device's
+ * data pipes when the library is initialized in USB host mode.
+ *
+ * \note This file should not be included directly. It is automatically included as needed by the USB driver
+ * dispatch header located in LUFA/Drivers/USB/USB.h.
+ */
+
+/** \ingroup Group_PipeManagement
+ * \defgroup Group_PipeRW Pipe Data Reading and Writing
+ *
+ * Functions, macros, variables, enums and types related to data reading and writing from and to pipes.
+ */
+
+/** \ingroup Group_PipeRW
+ * \defgroup Group_PipePrimitiveRW Read/Write of Primitive Data Types
+ *
+ * Functions, macros, variables, enums and types related to data reading and writing of primitive data types
+ * from and to pipes.
+ */
+
+/** \ingroup Group_PipeManagement
+ * \defgroup Group_PipePacketManagement Pipe Packet Management
+ *
+ * Functions, macros, variables, enums and types related to packet management of pipes.
+ */
+
+/** \ingroup Group_PipeManagement
+ * \defgroup Group_PipeControlReq Pipe Control Request Management
+ *
+ * Module for host mode request processing. This module allows for the transmission of standard, class and
+ * vendor control requests to the default control endpoint of an attached device while in host mode.
+ *
+ * \see Chapter 9 of the USB 2.0 specification.
+ */
+
+/** \ingroup Group_USB
+ * \defgroup Group_PipeManagement Pipe Management
+ *
+ * This module contains functions, macros and enums related to pipe management when in USB Host mode. This
+ * module contains the pipe management macros, as well as pipe interrupt and data send/receive functions
+ * for various data types.
+ *
+ * @{
+ */
+
+#ifndef __PIPE_H__
+#define __PIPE_H__
+
+ /* Includes: */
+ #include "../../../Common/Common.h"
+
+ #if (ARCH == ARCH_AVR8)
+ #include "AVR8/Pipe.h"
+ #endif
+
+ /* Preprocessor Checks: */
+ #if !defined(__INCLUDE_FROM_USB_DRIVER)
+ #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
+ #endif
+
+#endif
+
+/** @} */
+
diff --git a/LUFA/Drivers/USB/Core/PipeStream.c b/LUFA/Drivers/USB/Core/PipeStream.c new file mode 100644 index 000000000..4465471a8 --- /dev/null +++ b/LUFA/Drivers/USB/Core/PipeStream.c @@ -0,0 +1,216 @@ +/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2011.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+#define __INCLUDE_FROM_USB_DRIVER
+#include "USBMode.h"
+
+#if defined(USB_CAN_BE_HOST)
+
+#include "PipeStream.h"
+
+uint8_t Pipe_Discard_Stream(uint16_t Length,
+ uint16_t* const BytesProcessed)
+{
+ uint8_t ErrorCode;
+ uint16_t BytesInTransfer = 0;
+
+ Pipe_SetPipeToken(PIPE_TOKEN_IN);
+
+ if ((ErrorCode = Pipe_WaitUntilReady()))
+ return ErrorCode;
+
+ if (BytesProcessed != NULL)
+ Length -= *BytesProcessed;
+
+ while (Length)
+ {
+ if (!(Pipe_IsReadWriteAllowed()))
+ {
+ Pipe_ClearIN();
+
+ if (BytesProcessed != NULL)
+ {
+ *BytesProcessed += BytesInTransfer;
+ return PIPE_RWSTREAM_IncompleteTransfer;
+ }
+
+ if ((ErrorCode = Pipe_WaitUntilReady()))
+ return ErrorCode;
+ }
+ else
+ {
+ Pipe_Discard_Byte();
+
+ Length--;
+ BytesInTransfer++;
+ }
+ }
+
+ return PIPE_RWSTREAM_NoError;
+}
+
+uint8_t Pipe_Null_Stream(uint16_t Length,
+ uint16_t* const BytesProcessed)
+{
+ uint8_t ErrorCode;
+ uint16_t BytesInTransfer = 0;
+
+ Pipe_SetPipeToken(PIPE_TOKEN_OUT);
+
+ if ((ErrorCode = Pipe_WaitUntilReady()))
+ return ErrorCode;
+
+ if (BytesProcessed != NULL)
+ Length -= *BytesProcessed;
+
+ while (Length)
+ {
+ if (!(Pipe_IsReadWriteAllowed()))
+ {
+ Pipe_ClearOUT();
+
+ if (BytesProcessed != NULL)
+ {
+ *BytesProcessed += BytesInTransfer;
+ return PIPE_RWSTREAM_IncompleteTransfer;
+ }
+
+ USB_USBTask();
+
+ if ((ErrorCode = Pipe_WaitUntilReady()))
+ return ErrorCode;
+ }
+ else
+ {
+ Pipe_Write_Byte(0);
+
+ Length--;
+ BytesInTransfer++;
+ }
+ }
+
+ return PIPE_RWSTREAM_NoError;
+}
+
+/* The following abuses the C preprocessor in order to copy-past common code with slight alterations,
+ * so that the code needs to be written once. It is a crude form of templating to reduce code maintenance. */
+
+#define TEMPLATE_FUNC_NAME Pipe_Write_Stream_LE
+#define TEMPLATE_BUFFER_TYPE const void*
+#define TEMPLATE_TOKEN PIPE_TOKEN_OUT
+#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream += Amount
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_Byte(*BufferPtr)
+#include "Template/Template_Pipe_RW.c"
+
+#define TEMPLATE_FUNC_NAME Pipe_Write_PStream_LE
+#define TEMPLATE_BUFFER_TYPE const void*
+#define TEMPLATE_TOKEN PIPE_TOKEN_OUT
+#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream += Amount
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_Byte(pgm_read_byte(BufferPtr))
+#include "Template/Template_Pipe_RW.c"
+
+#define TEMPLATE_FUNC_NAME Pipe_Write_EStream_LE
+#define TEMPLATE_BUFFER_TYPE const void*
+#define TEMPLATE_TOKEN PIPE_TOKEN_OUT
+#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream += Amount
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_Byte(eeprom_read_byte(BufferPtr))
+#include "Template/Template_Pipe_RW.c"
+
+#define TEMPLATE_FUNC_NAME Pipe_Write_Stream_BE
+#define TEMPLATE_BUFFER_TYPE const void*
+#define TEMPLATE_TOKEN PIPE_TOKEN_OUT
+#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
+#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
+#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream -= Amount
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_Byte(*BufferPtr)
+#include "Template/Template_Pipe_RW.c"
+
+#define TEMPLATE_FUNC_NAME Pipe_Write_PStream_BE
+#define TEMPLATE_BUFFER_TYPE const void*
+#define TEMPLATE_TOKEN PIPE_TOKEN_OUT
+#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
+#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
+#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream -= Amount
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_Byte(pgm_read_byte(BufferPtr))
+#include "Template/Template_Pipe_RW.c"
+
+#define TEMPLATE_FUNC_NAME Pipe_Write_EStream_BE
+#define TEMPLATE_BUFFER_TYPE const void*
+#define TEMPLATE_TOKEN PIPE_TOKEN_OUT
+#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
+#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
+#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream -= Amount
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_Byte(eeprom_read_byte(BufferPtr))
+#include "Template/Template_Pipe_RW.c"
+
+#define TEMPLATE_FUNC_NAME Pipe_Read_Stream_LE
+#define TEMPLATE_BUFFER_TYPE void*
+#define TEMPLATE_TOKEN PIPE_TOKEN_IN
+#define TEMPLATE_CLEAR_PIPE() Pipe_ClearIN()
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream += Amount
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Pipe_Read_Byte()
+#include "Template/Template_Pipe_RW.c"
+
+#define TEMPLATE_FUNC_NAME Pipe_Read_EStream_LE
+#define TEMPLATE_BUFFER_TYPE void*
+#define TEMPLATE_TOKEN PIPE_TOKEN_IN
+#define TEMPLATE_CLEAR_PIPE() Pipe_ClearIN()
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream += Amount
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Pipe_Read_Byte())
+#include "Template/Template_Pipe_RW.c"
+
+#define TEMPLATE_FUNC_NAME Pipe_Read_Stream_BE
+#define TEMPLATE_BUFFER_TYPE void*
+#define TEMPLATE_TOKEN PIPE_TOKEN_IN
+#define TEMPLATE_CLEAR_PIPE() Pipe_ClearIN()
+#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
+#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream -= Amount
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Pipe_Read_Byte()
+#include "Template/Template_Pipe_RW.c"
+
+#define TEMPLATE_FUNC_NAME Pipe_Read_EStream_BE
+#define TEMPLATE_BUFFER_TYPE void*
+#define TEMPLATE_TOKEN PIPE_TOKEN_IN
+#define TEMPLATE_CLEAR_PIPE() Pipe_ClearIN()
+#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
+#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream -= Amount
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Pipe_Read_Byte())
+#include "Template/Template_Pipe_RW.c"
+
+#endif
+ diff --git a/LUFA/Drivers/USB/Core/PipeStream.h b/LUFA/Drivers/USB/Core/PipeStream.h new file mode 100644 index 000000000..86c544ebe --- /dev/null +++ b/LUFA/Drivers/USB/Core/PipeStream.h @@ -0,0 +1,461 @@ +/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2011.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief USB host pipe stream function definitions.
+ *
+ * This file contains structures, function prototypes and macros related to the sending and receiving of
+ * arbitrary data streams through the device's data pipes when the library is initialized in USB host mode.
+ *
+ * \note This file should not be included directly. It is automatically included as needed by the USB driver
+ * dispatch header located in LUFA/Drivers/USB/USB.h.
+ */
+
+/** \ingroup Group_PipeRW
+ * \defgroup Group_PipeStreamRW Read/Write of Multi-Byte Streams
+ *
+ * Functions, macros, variables, enums and types related to data reading and writing of data streams from
+ * and to pipes.
+ *
+ * @{
+ */
+
+#ifndef __PIPE_STREAM_H__
+#define __PIPE_STREAM_H__
+
+ /* Includes: */
+ #include "../../../Common/Common.h"
+ #include "USBTask.h"
+
+ /* Enable C linkage for C++ Compilers: */
+ #if defined(__cplusplus)
+ extern "C" {
+ #endif
+
+ /* Preprocessor Checks: */
+ #if !defined(__INCLUDE_FROM_USB_DRIVER)
+ #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
+ #endif
+
+ /* Public Interface - May be used in end-application: */
+ /* Enums: */
+ /** Enum for the possible error return codes of the Pipe_*_Stream_* functions. */
+ enum Pipe_Stream_RW_ErrorCodes_t
+ {
+ PIPE_RWSTREAM_NoError = 0, /**< Command completed successfully, no error. */
+ PIPE_RWSTREAM_PipeStalled = 1, /**< The device stalled the pipe during the transfer. */
+ PIPE_RWSTREAM_DeviceDisconnected = 2, /**< Device was disconnected from the host during
+ * the transfer.
+ */
+ PIPE_RWSTREAM_Timeout = 3, /**< The device failed to accept or send the next packet
+ * within the software timeout period set by the
+ * \ref USB_STREAM_TIMEOUT_MS macro.
+ */
+ PIPE_RWSTREAM_IncompleteTransfer = 4, /**< Indicates that the pipe bank became full/empty before the
+ * complete contents of the stream could be transferred.
+ */
+ };
+
+ /* Function Prototypes: */
+
+ /** \name Stream functions for null data */
+ //@{
+
+ /** Reads and discards the given number of bytes from the pipe, discarding fully read packets from the host
+ * as needed. The last packet is not automatically discarded once the remaining bytes has been read; the
+ * user is responsible for manually discarding the last packet from the device via the \ref Pipe_ClearIN() macro.
+ *
+ * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once, failing or
+ * succeeding as a single unit. If the BytesProcessed parameter points to a valid storage location, the transfer
+ * will instead be performed as a series of chunks. Each time the pipe bank becomes empty while there is still data
+ * to process (and after the current packet has been acknowledged) the BytesProcessed location will be updated with
+ * the total number of bytes processed in the stream, and the function will exit with an error code of
+ * \ref PIPE_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed in the user code - to
+ * continue the transfer, call the function again with identical parameters and it will resume until the BytesProcessed
+ * value reaches the total transfer length.
+ *
+ * <b>Single Stream Transfer Example:</b>
+ * \code
+ * uint8_t ErrorCode;
+ *
+ * if ((ErrorCode = Pipe_Discard_Stream(512, NULL)) != PIPE_RWSTREAM_NoError)
+ * {
+ * // Stream failed to complete - check ErrorCode here
+ * }
+ * \endcode
+ *
+ * <b>Partial Stream Transfers Example:</b>
+ * \code
+ * uint8_t ErrorCode;
+ * uint16_t BytesProcessed;
+ *
+ * BytesProcessed = 0;
+ * while ((ErrorCode = Pipe_Discard_Stream(512, &BytesProcessed)) == PIPE_RWSTREAM_IncompleteTransfer)
+ * {
+ * // Stream not yet complete - do other actions here, abort if required
+ * }
+ *
+ * if (ErrorCode != PIPE_RWSTREAM_NoError)
+ * {
+ * // Stream failed to complete - check ErrorCode here
+ * }
+ * \endcode
+ *
+ * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without
+ * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().
+ *
+ * \param[in] Length Number of bytes to discard via the currently selected pipe.
+ * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should
+ * updated, \c NULL if the entire stream should be processed at once.
+ *
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Pipe_Discard_Stream(uint16_t Length,
+ uint16_t* const BytesProcessed);
+
+ /** Writes a given number of zeroed bytes to the pipe, sending full pipe packets from the host to the device
+ * as needed. The last packet is not automatically sent once the remaining bytes has been written; the
+ * user is responsible for manually discarding the last packet from the device via the \ref Pipe_ClearOUT() macro.
+ *
+ * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once, failing or
+ * succeeding as a single unit. If the BytesProcessed parameter points to a valid storage location, the transfer
+ * will instead be performed as a series of chunks. Each time the pipe bank becomes full while there is still data
+ * to process (and after the current packet transmission has been initiated) the BytesProcessed location will be
+ * updated with the total number of bytes processed in the stream, and the function will exit with an error code of
+ * \ref PIPE_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed in the user code - to
+ * continue the transfer, call the function again with identical parameters and it will resume until the BytesProcessed
+ * value reaches the total transfer length.
+ *
+ * <b>Single Stream Transfer Example:</b>
+ * \code
+ * uint8_t ErrorCode;
+ *
+ * if ((ErrorCode = Pipe_Null_Stream(512, NULL)) != PIPE_RWSTREAM_NoError)
+ * {
+ * // Stream failed to complete - check ErrorCode here
+ * }
+ * \endcode
+ *
+ * <b>Partial Stream Transfers Example:</b>
+ * \code
+ * uint8_t ErrorCode;
+ * uint16_t BytesProcessed;
+ *
+ * BytesProcessed = 0;
+ * while ((ErrorCode = Pipe_Null_Stream(512, &BytesProcessed)) == PIPE_RWSTREAM_IncompleteTransfer)
+ * {
+ * // Stream not yet complete - do other actions here, abort if required
+ * }
+ *
+ * if (ErrorCode != PIPE_RWSTREAM_NoError)
+ * {
+ * // Stream failed to complete - check ErrorCode here
+ * }
+ * \endcode
+ *
+ * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without
+ * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().
+ *
+ * \param[in] Length Number of zero bytes to write via the currently selected pipe.
+ * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should
+ * updated, \c NULL if the entire stream should be processed at once.
+ *
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Pipe_Null_Stream(uint16_t Length,
+ uint16_t* const BytesProcessed);
+
+ //@}
+
+ /** \name Stream functions for RAM source/destination data */
+ //@{
+
+ /** Writes the given number of bytes to the pipe from the given buffer in little endian,
+ * sending full packets to the device as needed. The last packet filled is not automatically sent;
+ * the user is responsible for manually sending the last written packet to the host via the
+ * \ref Pipe_ClearOUT() macro. Between each USB packet, the given stream callback function is
+ * executed repeatedly until the next packet is ready, allowing for early aborts of stream transfers.
+ *
+ * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once,
+ * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid
+ * storage location, the transfer will instead be performed as a series of chunks. Each time
+ * the pipe bank becomes full while there is still data to process (and after the current
+ * packet transmission has been initiated) the BytesProcessed location will be updated with the
+ * total number of bytes processed in the stream, and the function will exit with an error code of
+ * \ref PIPE_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed
+ * in the user code - to continue the transfer, call the function again with identical parameters
+ * and it will resume until the BytesProcessed value reaches the total transfer length.
+ *
+ * <b>Single Stream Transfer Example:</b>
+ * \code
+ * uint8_t DataStream[512];
+ * uint8_t ErrorCode;
+ *
+ * if ((ErrorCode = Pipe_Write_Stream_LE(DataStream, sizeof(DataStream),
+ * NULL)) != PIPE_RWSTREAM_NoError)
+ * {
+ * // Stream failed to complete - check ErrorCode here
+ * }
+ * \endcode
+ *
+ * <b>Partial Stream Transfers Example:</b>
+ * \code
+ * uint8_t DataStream[512];
+ * uint8_t ErrorCode;
+ * uint16_t BytesProcessed;
+ *
+ * BytesProcessed = 0;
+ * while ((ErrorCode = Pipe_Write_Stream_LE(DataStream, sizeof(DataStream),
+ * &BytesProcessed)) == PIPE_RWSTREAM_IncompleteTransfer)
+ * {
+ * // Stream not yet complete - do other actions here, abort if required
+ * }
+ *
+ * if (ErrorCode != PIPE_RWSTREAM_NoError)
+ * {
+ * // Stream failed to complete - check ErrorCode here
+ * }
+ * \endcode
+ *
+ * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without
+ * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.
+ * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should
+ * updated, \c NULL if the entire stream should be written at once.
+ *
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Pipe_Write_Stream_LE(const void* const Buffer,
+ uint16_t Length,
+ uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Writes the given number of bytes to the pipe from the given buffer in big endian,
+ * sending full packets to the device as needed. The last packet filled is not automatically sent;
+ * the user is responsible for manually sending the last written packet to the host via the
+ * \ref Pipe_ClearOUT() macro. Between each USB packet, the given stream callback function is
+ * executed repeatedly until the next packet is ready, allowing for early aborts of stream transfers.
+ *
+ * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without
+ * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.
+ * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should
+ * updated, \c NULL if the entire stream should be written at once.
+ *
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Pipe_Write_Stream_BE(const void* const Buffer,
+ uint16_t Length,
+ uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Reads the given number of bytes from the pipe into the given buffer in little endian,
+ * sending full packets to the device as needed. The last packet filled is not automatically sent;
+ * the user is responsible for manually sending the last written packet to the host via the
+ * \ref Pipe_ClearIN() macro. Between each USB packet, the given stream callback function is
+ * executed repeatedly until the next packet is ready, allowing for early aborts of stream transfers.
+ *
+ * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once,
+ * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid
+ * storage location, the transfer will instead be performed as a series of chunks. Each time
+ * the pipe bank becomes empty while there is still data to process (and after the current
+ * packet has been acknowledged) the BytesProcessed location will be updated with the total number
+ * of bytes processed in the stream, and the function will exit with an error code of
+ * \ref PIPE_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed
+ * in the user code - to continue the transfer, call the function again with identical parameters
+ * and it will resume until the BytesProcessed value reaches the total transfer length.
+ *
+ * <b>Single Stream Transfer Example:</b>
+ * \code
+ * uint8_t DataStream[512];
+ * uint8_t ErrorCode;
+ *
+ * if ((ErrorCode = Pipe_Read_Stream_LE(DataStream, sizeof(DataStream),
+ * NULL)) != PIPE_RWSTREAM_NoError)
+ * {
+ * // Stream failed to complete - check ErrorCode here
+ * }
+ * \endcode
+ *
+ * <b>Partial Stream Transfers Example:</b>
+ * \code
+ * uint8_t DataStream[512];
+ * uint8_t ErrorCode;
+ * uint16_t BytesProcessed;
+ *
+ * BytesProcessed = 0;
+ * while ((ErrorCode = Pipe_Read_Stream_LE(DataStream, sizeof(DataStream),
+ * &BytesProcessed)) == PIPE_RWSTREAM_IncompleteTransfer)
+ * {
+ * // Stream not yet complete - do other actions here, abort if required
+ * }
+ *
+ * if (ErrorCode != PIPE_RWSTREAM_NoError)
+ * {
+ * // Stream failed to complete - check ErrorCode here
+ * }
+ * \endcode
+ *
+ * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without
+ * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().
+ *
+ * \param[out] Buffer Pointer to the source data buffer to write to.
+ * \param[in] Length Number of bytes to read for the currently selected pipe to read from.
+ * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should
+ * updated, \c NULL if the entire stream should be read at once.
+ *
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Pipe_Read_Stream_LE(void* const Buffer,
+ uint16_t Length,
+ uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** Reads the given number of bytes from the pipe into the given buffer in big endian,
+ * sending full packets to the device as needed. The last packet filled is not automatically sent;
+ * the user is responsible for manually sending the last written packet to the host via the
+ * \ref Pipe_ClearIN() macro. Between each USB packet, the given stream callback function is
+ * executed repeatedly until the next packet is ready, allowing for early aborts of stream transfers.
+ *
+ * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without
+ * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().
+ *
+ * \param[out] Buffer Pointer to the source data buffer to write to.
+ * \param[in] Length Number of bytes to read for the currently selected pipe to read from.
+ * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should
+ * updated, \c NULL if the entire stream should be read at once.
+ *
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Pipe_Read_Stream_BE(void* const Buffer,
+ uint16_t Length,
+ uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
+ //@}
+
+ /** \name Stream functions for EEPROM source/destination data */
+ //@{
+
+ /** EEPROM buffer source version of \ref Pipe_Write_Stream_LE().
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.
+ * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should
+ * updated, \c NULL if the entire stream should be written at once.
+ *
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Pipe_Write_EStream_LE(const void* const Buffer,
+ uint16_t Length,
+ uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** EEPROM buffer source version of \ref Pipe_Write_Stream_BE().
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.
+ * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should
+ * updated, \c NULL if the entire stream should be written at once.
+ *
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Pipe_Write_EStream_BE(const void* const Buffer,
+ uint16_t Length,
+ uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** EEPROM buffer source version of \ref Pipe_Read_Stream_LE().
+ *
+ * \param[out] Buffer Pointer to the source data buffer to write to.
+ * \param[in] Length Number of bytes to read for the currently selected pipe to read from.
+ * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should
+ * updated, \c NULL if the entire stream should be read at once.
+ *
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Pipe_Read_EStream_LE(void* const Buffer,
+ uint16_t Length,
+ uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** EEPROM buffer source version of \ref Pipe_Read_Stream_BE().
+ *
+ * \param[out] Buffer Pointer to the source data buffer to write to.
+ * \param[in] Length Number of bytes to read for the currently selected pipe to read from.
+ * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should
+ * updated, \c NULL if the entire stream should be read at once.
+ *
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Pipe_Read_EStream_BE(void* const Buffer,
+ uint16_t Length,
+ uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
+ //@}
+
+ /** \name Stream functions for PROGMEM source/destination data */
+ //@{
+
+ /** FLASH buffer source version of \ref Pipe_Write_Stream_LE().
+ *
+ * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.
+ * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should
+ * updated, \c NULL if the entire stream should be written at once.
+ *
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Pipe_Write_PStream_LE(const void* const Buffer,
+ uint16_t Length,
+ uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** FLASH buffer source version of \ref Pipe_Write_Stream_BE().
+ *
+ * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.
+ * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should
+ * updated, \c NULL if the entire stream should be written at once.
+ *
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Pipe_Write_PStream_BE(const void* const Buffer,
+ uint16_t Length,
+ uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
+ //@}
+
+ /* Disable C linkage for C++ Compilers: */
+ #if defined(__cplusplus)
+ }
+ #endif
+
+#endif
+
+/** @} */
+ diff --git a/LUFA/Drivers/USB/Core/StdDescriptors.h b/LUFA/Drivers/USB/Core/StdDescriptors.h new file mode 100644 index 000000000..ed4ecf91e --- /dev/null +++ b/LUFA/Drivers/USB/Core/StdDescriptors.h @@ -0,0 +1,669 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB standard descriptor definitions. + * + * This file contains structures and macros for the easy creation of standard USB descriptors in USB device projects. + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_USB + * \defgroup Group_Descriptors USB Descriptors + * + * Standard USB device descriptor defines and retrieval routines, for USB devices. This module contains + * structures and macros for the easy creation of standard USB descriptors in USB device projects. + * + * @{ + */ + +#ifndef __USBDESCRIPTORS_H__ +#define __USBDESCRIPTORS_H__ + + /* Includes: */ + #include "../../../Common/Common.h" + #include "USBMode.h" + #include "Events.h" + + #if defined(USB_CAN_BE_DEVICE) + #include "Device.h" + #endif + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** Indicates that a given descriptor does not exist in the device. This can be used inside descriptors + * for string descriptor indexes, or may be use as a return value for GetDescriptor when the specified + * descriptor does not exist. + */ + #define NO_DESCRIPTOR 0 + + /** Macro to calculate the power value for the configuration descriptor, from a given number of milliamperes. */ + #define USB_CONFIG_POWER_MA(mA) ((mA) >> 1) + + /** Macro to calculate the Unicode length of a string with a given number of Unicode characters. + * Should be used in string descriptor's headers for giving the string descriptor's byte length. + */ + #define USB_STRING_LEN(str) (sizeof(USB_Descriptor_Header_t) + ((str) << 1)) + + /** Macro to encode a given four digit floating point version number (e.g. 01.23) into Binary Coded + * Decimal format for descriptor fields requiring BCD encoding, such as the USB version number in the + * standard device descriptor. + */ + #define VERSION_BCD(x) ((((VERSION_TENS(x) << 4) | VERSION_ONES(x)) << 8) | \ + ((VERSION_TENTHS(x) << 4) | VERSION_HUNDREDTHS(x))) + + /** String language ID for the English language. Should be used in \ref USB_Descriptor_String_t descriptors + * to indicate that the English language is supported by the device in its string descriptors. + */ + #define LANGUAGE_ID_ENG 0x0409 + + /** \name Endpoint Address Direction Masks */ + //@{ + /** Can be masked with an endpoint address for a \ref USB_Descriptor_Endpoint_t endpoint descriptor's + * EndpointAddress value to indicate to the host that the endpoint is of the IN direction (i.e, from + * device to host). + */ + #define ENDPOINT_DESCRIPTOR_DIR_IN 0x80 + + /** Can be masked with an endpoint address for a \ref USB_Descriptor_Endpoint_t endpoint descriptor's + * EndpointAddress value to indicate to the host that the endpoint is of the OUT direction (i.e, from + * host to device). + */ + #define ENDPOINT_DESCRIPTOR_DIR_OUT 0x00 + //@} + + /** \name USB Configuration Descriptor Attribute Masks */ + //@{ + /** Can be masked with other configuration descriptor attributes for a \ref USB_Descriptor_Configuration_Header_t + * descriptor's ConfigAttributes value to indicate that the specified configuration can draw its power + * from the host's VBUS line. + */ + #define USB_CONFIG_ATTR_BUSPOWERED 0x80 + + /** Can be masked with other configuration descriptor attributes for a \ref USB_Descriptor_Configuration_Header_t + * descriptor's ConfigAttributes value to indicate that the specified configuration can draw its power + * from the device's own power source. + */ + #define USB_CONFIG_ATTR_SELFPOWERED 0x40 + + /** Can be masked with other configuration descriptor attributes for a \ref USB_Descriptor_Configuration_Header_t + * descriptor's ConfigAttributes value to indicate that the specified configuration supports the + * remote wakeup feature of the USB standard, allowing a suspended USB device to wake up the host upon + * request. + */ + #define USB_CONFIG_ATTR_REMOTEWAKEUP 0x20 + //@} + + /** \name Endpoint Descriptor Attribute Masks */ + //@{ + /** Can be masked with other endpoint descriptor attributes for a \ref USB_Descriptor_Endpoint_t descriptor's + * Attributes value to indicate that the specified endpoint is not synchronized. + * + * \see The USB specification for more details on the possible Endpoint attributes. + */ + #define ENDPOINT_ATTR_NO_SYNC (0 << 2) + + /** Can be masked with other endpoint descriptor attributes for a \ref USB_Descriptor_Endpoint_t descriptor's + * Attributes value to indicate that the specified endpoint is asynchronous. + * + * \see The USB specification for more details on the possible Endpoint attributes. + */ + #define ENDPOINT_ATTR_ASYNC (1 << 2) + + /** Can be masked with other endpoint descriptor attributes for a \ref USB_Descriptor_Endpoint_t descriptor's + * Attributes value to indicate that the specified endpoint is adaptive. + * + * \see The USB specification for more details on the possible Endpoint attributes. + */ + #define ENDPOINT_ATTR_ADAPTIVE (2 << 2) + + /** Can be masked with other endpoint descriptor attributes for a \ref USB_Descriptor_Endpoint_t descriptor's + * Attributes value to indicate that the specified endpoint is synchronized. + * + * \see The USB specification for more details on the possible Endpoint attributes. + */ + #define ENDPOINT_ATTR_SYNC (3 << 2) + //@} + + /** \name Endpoint Descriptor Usage Masks */ + //@{ + /** Can be masked with other endpoint descriptor attributes for a \ref USB_Descriptor_Endpoint_t descriptor's + * Attributes value to indicate that the specified endpoint is used for data transfers. + * + * \see The USB specification for more details on the possible Endpoint usage attributes. + */ + #define ENDPOINT_USAGE_DATA (0 << 4) + + /** Can be masked with other endpoint descriptor attributes for a \ref USB_Descriptor_Endpoint_t descriptor's + * Attributes value to indicate that the specified endpoint is used for feedback. + * + * \see The USB specification for more details on the possible Endpoint usage attributes. + */ + #define ENDPOINT_USAGE_FEEDBACK (1 << 4) + + /** Can be masked with other endpoint descriptor attributes for a \ref USB_Descriptor_Endpoint_t descriptor's + * Attributes value to indicate that the specified endpoint is used for implicit feedback. + * + * \see The USB specification for more details on the possible Endpoint usage attributes. + */ + #define ENDPOINT_USAGE_IMPLICIT_FEEDBACK (2 << 4) + //@} + + /* Enums: */ + /** Enum for the possible standard descriptor types, as given in each descriptor's header. */ + enum USB_DescriptorTypes_t + { + DTYPE_Device = 0x01, /**< Indicates that the descriptor is a device descriptor. */ + DTYPE_Configuration = 0x02, /**< Indicates that the descriptor is a configuration descriptor. */ + DTYPE_String = 0x03, /**< Indicates that the descriptor is a string descriptor. */ + DTYPE_Interface = 0x04, /**< Indicates that the descriptor is an interface descriptor. */ + DTYPE_Endpoint = 0x05, /**< Indicates that the descriptor is an endpoint descriptor. */ + DTYPE_DeviceQualifier = 0x06, /**< Indicates that the descriptor is a device qualifier descriptor. */ + DTYPE_Other = 0x07, /**< Indicates that the descriptor is of other type. */ + DTYPE_InterfacePower = 0x08, /**< Indicates that the descriptor is an interface power descriptor. */ + DTYPE_InterfaceAssociation = 0x0B, /**< Indicates that the descriptor is an interface association descriptor. */ + DTYPE_CSInterface = 0x24, /**< Indicates that the descriptor is a class specific interface descriptor. */ + DTYPE_CSEndpoint = 0x25, /**< Indicates that the descriptor is a class specific endpoint descriptor. */ + }; + + /** Enum for possible Class, Subclass and Protocol values of device and interface descriptors. */ + enum USB_Descriptor_ClassSubclassProtocol_t + { + USB_CSCP_NoDeviceClass = 0x00, /**< Descriptor Class value indicating that the device does not belong + * to a particular class at the device level. + */ + USB_CSCP_NoDeviceSubclass = 0x00, /**< Descriptor Subclass value indicating that the device does not belong + * to a particular subclass at the device level. + */ + USB_CSCP_NoDeviceProtocol = 0x00, /**< Descriptor Protocol value indicating that the device does not belong + * to a particular protocol at the device level. + */ + USB_CSCP_VendorSpecificClass = 0xFF, /**< Descriptor Class value indicating that the device/interface belongs + * to a vendor specific class. + */ + USB_CSCP_VendorSpecificSubclass = 0xFF, /**< Descriptor Subclass value indicating that the device/interface belongs + * to a vendor specific subclass. + */ + USB_CSCP_VendorSpecificProtocol = 0xFF, /**< Descriptor Protocol value indicating that the device/interface belongs + * to a vendor specific protocol. + */ + USB_CSCP_IADDeviceClass = 0xEF, /**< Descriptor Class value indicating that the device belongs to the + * Interface Association Descriptor class. + */ + USB_CSCP_IADDeviceSubclass = 0x02, /**< Descriptor Subclass value indicating that the device belongs to the + * Interface Association Descriptor subclass. + */ + USB_CSCP_IADDeviceProtocol = 0x01, /**< Descriptor Protocol value indicating that the device belongs to the + * Interface Association Descriptor protocol. + */ + }; + + /* Type Defines: */ + /** \brief Standard USB Descriptor Header (LUFA naming conventions). + * + * Type define for all descriptors' standard header, indicating the descriptor's length and type. This structure + * uses LUFA-specific element names to make each element's purpose clearer. + * + * \see \ref USB_StdDescriptor_Header_t for the version of this type with standard element names. + */ + typedef struct + { + uint8_t Size; /**< Size of the descriptor, in bytes. */ + uint8_t Type; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t or a value + * given by the specific class. + */ + } USB_Descriptor_Header_t; + + /** \brief Standard USB Descriptor Header (USB-IF naming conventions). + * + * Type define for all descriptors' standard header, indicating the descriptor's length and type. This structure + * uses the relevant standard's given element names to ensure compatibility with the standard. + * + * \see \ref USB_Descriptor_Header_t for the version of this type with non-standard LUFA specific element names. + */ + typedef struct + { + uint8_t bLength; /**< Size of the descriptor, in bytes. */ + uint8_t bDescriptorType; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t or a value + * given by the specific class. + */ + } USB_StdDescriptor_Header_t; + + /** \brief Standard USB Device Descriptor (LUFA naming conventions). + * + * Type define for a standard Device Descriptor. This structure uses LUFA-specific element names to make each + * element's purpose clearer. + * + * \see \ref USB_StdDescriptor_Device_t for the version of this type with standard element names. + */ + typedef struct + { + USB_Descriptor_Header_t Header; /**< Descriptor header, including type and size. */ + + uint16_t USBSpecification; /**< BCD of the supported USB specification. */ + uint8_t Class; /**< USB device class. */ + uint8_t SubClass; /**< USB device subclass. */ + uint8_t Protocol; /**< USB device protocol. */ + + uint8_t Endpoint0Size; /**< Size of the control (address 0) endpoint's bank in bytes. */ + + uint16_t VendorID; /**< Vendor ID for the USB product. */ + uint16_t ProductID; /**< Unique product ID for the USB product. */ + uint16_t ReleaseNumber; /**< Product release (version) number. */ + + uint8_t ManufacturerStrIndex; /**< String index for the manufacturer's name. The + * host will request this string via a separate + * control request for the string descriptor. + * + * \note If no string supplied, use \ref NO_DESCRIPTOR. + */ + uint8_t ProductStrIndex; /**< String index for the product name/details. + * + * \see ManufacturerStrIndex structure entry. + */ + uint8_t SerialNumStrIndex; /**< String index for the product's globally unique hexadecimal + * serial number, in uppercase Unicode ASCII. + * + * \note On some AVR models, there is an embedded serial number + * in the chip which can be used for the device serial number. + * To use this serial number, set this to USE_INTERNAL_SERIAL. + * On unsupported devices, this will evaluate to 0 and will cause + * the host to generate a pseudo-unique value for the device upon + * insertion. + * + * \see ManufacturerStrIndex structure entry. + */ + uint8_t NumberOfConfigurations; /**< Total number of configurations supported by + * the device. + */ + } USB_Descriptor_Device_t; + + /** \brief Standard USB Device Descriptor (USB-IF naming conventions). + * + * Type define for a standard Device Descriptor. This structure uses the relevant standard's given element names + * to ensure compatibility with the standard. + * + * \see \ref USB_Descriptor_Device_t for the version of this type with non-standard LUFA specific element names. + */ + typedef struct + { + uint8_t bLength; /**< Size of the descriptor, in bytes. */ + uint8_t bDescriptorType; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t or a value + * given by the specific class. + */ + uint16_t bcdUSB; /**< BCD of the supported USB specification. */ + uint8_t bDeviceClass; /**< USB device class. */ + uint8_t bDeviceSubClass; /**< USB device subclass. */ + uint8_t bDeviceProtocol; /**< USB device protocol. */ + uint8_t bMaxPacketSize0; /**< Size of the control (address 0) endpoint's bank in bytes. */ + uint16_t idVendor; /**< Vendor ID for the USB product. */ + uint16_t idProduct; /**< Unique product ID for the USB product. */ + uint16_t bcdDevice; /**< Product release (version) number. */ + uint8_t iManufacturer; /**< String index for the manufacturer's name. The + * host will request this string via a separate + * control request for the string descriptor. + * + * \note If no string supplied, use \ref NO_DESCRIPTOR. + */ + uint8_t iProduct; /**< String index for the product name/details. + * + * \see ManufacturerStrIndex structure entry. + */ + uint8_t iSerialNumber; /**< String index for the product's globally unique hexadecimal + * serial number, in uppercase Unicode ASCII. + * + * \note On some AVR models, there is an embedded serial number + * in the chip which can be used for the device serial number. + * To use this serial number, set this to USE_INTERNAL_SERIAL. + * On unsupported devices, this will evaluate to 0 and will cause + * the host to generate a pseudo-unique value for the device upon + * insertion. + * + * \see ManufacturerStrIndex structure entry. + */ + uint8_t bNumConfigurations; /**< Total number of configurations supported by + * the device. + */ + } USB_StdDescriptor_Device_t; + + /** \brief Standard USB Configuration Descriptor (LUFA naming conventions). + * + * Type define for a standard Configuration Descriptor header. This structure uses LUFA-specific element names + * to make each element's purpose clearer. + * + * \see \ref USB_StdDescriptor_Configuration_Header_t for the version of this type with standard element names. + */ + typedef struct + { + USB_Descriptor_Header_t Header; /**< Descriptor header, including type and size. */ + + uint16_t TotalConfigurationSize; /**< Size of the configuration descriptor header, + * and all sub descriptors inside the configuration. + */ + uint8_t TotalInterfaces; /**< Total number of interfaces in the configuration. */ + + uint8_t ConfigurationNumber; /**< Configuration index of the current configuration. */ + uint8_t ConfigurationStrIndex; /**< Index of a string descriptor describing the configuration. */ + + uint8_t ConfigAttributes; /**< Configuration attributes, comprised of a mask of zero or + * more USB_CONFIG_ATTR_* masks. + */ + + uint8_t MaxPowerConsumption; /**< Maximum power consumption of the device while in the + * current configuration, calculated by the \ref USB_CONFIG_POWER_MA() + * macro. + */ + } USB_Descriptor_Configuration_Header_t; + + /** \brief Standard USB Configuration Descriptor (USB-IF naming conventions). + * + * Type define for a standard Configuration Descriptor header. This structure uses the relevant standard's given element names + * to ensure compatibility with the standard. + * + * \see \ref USB_Descriptor_Device_t for the version of this type with non-standard LUFA specific element names. + */ + typedef struct + { + uint8_t bLength; /**< Size of the descriptor, in bytes. */ + uint8_t bDescriptorType; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t or a value + * given by the specific class. + */ + uint16_t wTotalLength; /**< Size of the configuration descriptor header, + * and all sub descriptors inside the configuration. + */ + uint8_t bNumInterfaces; /**< Total number of interfaces in the configuration. */ + uint8_t bConfigurationValue; /**< Configuration index of the current configuration. */ + uint8_t iConfiguration; /**< Index of a string descriptor describing the configuration. */ + uint8_t bmAttributes; /**< Configuration attributes, comprised of a mask of zero or + * more USB_CONFIG_ATTR_* masks. + */ + uint8_t bMaxPower; /**< Maximum power consumption of the device while in the + * current configuration, calculated by the \ref USB_CONFIG_POWER_MA() + * macro. + */ + } USB_StdDescriptor_Configuration_Header_t; + + /** \brief Standard USB Interface Descriptor (LUFA naming conventions). + * + * Type define for a standard Interface Descriptor. This structure uses LUFA-specific element names + * to make each element's purpose clearer. + * + * \see \ref USB_StdDescriptor_Interface_t for the version of this type with standard element names. + */ + typedef struct + { + USB_Descriptor_Header_t Header; /**< Descriptor header, including type and size. */ + + uint8_t InterfaceNumber; /**< Index of the interface in the current configuration. */ + uint8_t AlternateSetting; /**< Alternate setting for the interface number. The same + * interface number can have multiple alternate settings + * with different endpoint configurations, which can be + * selected by the host. + */ + uint8_t TotalEndpoints; /**< Total number of endpoints in the interface. */ + + uint8_t Class; /**< Interface class ID. */ + uint8_t SubClass; /**< Interface subclass ID. */ + uint8_t Protocol; /**< Interface protocol ID. */ + + uint8_t InterfaceStrIndex; /**< Index of the string descriptor describing the interface. */ + } USB_Descriptor_Interface_t; + + /** \brief Standard USB Interface Descriptor (USB-IF naming conventions). + * + * Type define for a standard Interface Descriptor. This structure uses the relevant standard's given element names + * to ensure compatibility with the standard. + * + * \see \ref USB_Descriptor_Interface_t for the version of this type with non-standard LUFA specific element names. + */ + typedef struct + { + uint8_t bLength; /**< Size of the descriptor, in bytes. */ + uint8_t bDescriptorType; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t or a value + * given by the specific class. + */ + uint8_t bInterfaceNumber; /**< Index of the interface in the current configuration. */ + uint8_t bAlternateSetting; /**< Alternate setting for the interface number. The same + * interface number can have multiple alternate settings + * with different endpoint configurations, which can be + * selected by the host. + */ + uint8_t bNumEndpoints; /**< Total number of endpoints in the interface. */ + uint8_t bInterfaceClass; /**< Interface class ID. */ + uint8_t bInterfaceSubClass; /**< Interface subclass ID. */ + uint8_t bInterfaceProtocol; /**< Interface protocol ID. */ + uint8_t iInterface; /**< Index of the string descriptor describing the + * interface. + */ + } USB_StdDescriptor_Interface_t; + + /** \brief Standard USB Interface Association Descriptor (LUFA naming conventions). + * + * Type define for a standard Interface Association Descriptor. This structure uses LUFA-specific element names + * to make each element's purpose clearer. + * + * This descriptor has been added as a supplement to the USB2.0 standard, in the ECN located at + * <a>http://www.usb.org/developers/docs/InterfaceAssociationDescriptor_ecn.pdf</a>. It allows composite + * devices with multiple interfaces related to the same function to have the multiple interfaces bound + * together at the point of enumeration, loading one generic driver for all the interfaces in the single + * function. Read the ECN for more information. + * + * \see \ref USB_StdDescriptor_Interface_Association_t for the version of this type with standard element names. + */ + typedef struct + { + USB_Descriptor_Header_t Header; /**< Descriptor header, including type and size. */ + + uint8_t FirstInterfaceIndex; /**< Index of the first associated interface. */ + uint8_t TotalInterfaces; /**< Total number of associated interfaces. */ + + uint8_t Class; /**< Interface class ID. */ + uint8_t SubClass; /**< Interface subclass ID. */ + uint8_t Protocol; /**< Interface protocol ID. */ + + uint8_t IADStrIndex; /**< Index of the string descriptor describing the + * interface association. + */ + } USB_Descriptor_Interface_Association_t; + + /** \brief Standard USB Interface Association Descriptor (USB-IF naming conventions). + * + * Type define for a standard Interface Association Descriptor. This structure uses the relevant standard's given + * element names to ensure compatibility with the standard. + * + * This descriptor has been added as a supplement to the USB2.0 standard, in the ECN located at + * <a>http://www.usb.org/developers/docs/InterfaceAssociationDescriptor_ecn.pdf</a>. It allows composite + * devices with multiple interfaces related to the same function to have the multiple interfaces bound + * together at the point of enumeration, loading one generic driver for all the interfaces in the single + * function. Read the ECN for more information. + * + * \see \ref USB_Descriptor_Interface_Association_t for the version of this type with non-standard LUFA specific + * element names. + */ + typedef struct + { + uint8_t bLength; /**< Size of the descriptor, in bytes. */ + uint8_t bDescriptorType; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t or a value + * given by the specific class. + */ + uint8_t bFirstInterface; /**< Index of the first associated interface. */ + uint8_t bInterfaceCount; /**< Total number of associated interfaces. */ + uint8_t bFunctionClass; /**< Interface class ID. */ + uint8_t bFunctionSubClass; /**< Interface subclass ID. */ + uint8_t bFunctionProtocol; /**< Interface protocol ID. */ + uint8_t iFunction; /**< Index of the string descriptor describing the + * interface association. + */ + } USB_StdDescriptor_Interface_Association_t; + + /** \brief Standard USB Endpoint Descriptor (LUFA naming conventions). + * + * Type define for a standard Endpoint Descriptor. This structure uses LUFA-specific element names + * to make each element's purpose clearer. + * + * \see \ref USB_StdDescriptor_Endpoint_t for the version of this type with standard element names. + */ + typedef struct + { + USB_Descriptor_Header_t Header; /**< Descriptor header, including type and size. */ + + uint8_t EndpointAddress; /**< Logical address of the endpoint within the device for the current + * configuration, including direction mask. + */ + uint8_t Attributes; /**< Endpoint attributes, comprised of a mask of the endpoint type (EP_TYPE_*) + * and attributes (ENDPOINT_ATTR_*) masks. + */ + uint16_t EndpointSize; /**< Size of the endpoint bank, in bytes. This indicates the maximum packet + * size that the endpoint can receive at a time. + */ + uint8_t PollingIntervalMS; /**< Polling interval in milliseconds for the endpoint if it is an INTERRUPT + * or ISOCHRONOUS type. + */ + } USB_Descriptor_Endpoint_t; + + /** \brief Standard USB Endpoint Descriptor (USB-IF naming conventions). + * + * Type define for a standard Endpoint Descriptor. This structure uses the relevant standard's given + * element names to ensure compatibility with the standard. + * + * \see \ref USB_Descriptor_Endpoint_t for the version of this type with non-standard LUFA specific + * element names. + */ + typedef struct + { + uint8_t bLength; /**< Size of the descriptor, in bytes. */ + uint8_t bDescriptorType; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t or a + * value given by the specific class. + */ + uint8_t bEndpointAddress; /**< Logical address of the endpoint within the device for the current + * configuration, including direction mask. + */ + uint8_t bmAttributes; /**< Endpoint attributes, comprised of a mask of the endpoint type (EP_TYPE_*) + * and attributes (ENDPOINT_ATTR_*) masks. + */ + uint16_t wMaxPacketSize; /**< Size of the endpoint bank, in bytes. This indicates the maximum packet size + * that the endpoint can receive at a time. + */ + uint8_t bInterval; /**< Polling interval in milliseconds for the endpoint if it is an INTERRUPT or + * ISOCHRONOUS type. + */ + } USB_StdDescriptor_Endpoint_t; + + /** \brief Standard USB String Descriptor (LUFA naming conventions). + * + * Type define for a standard string descriptor. Unlike other standard descriptors, the length + * of the descriptor for placement in the descriptor header must be determined by the \ref USB_STRING_LEN() + * macro rather than by the size of the descriptor structure, as the length is not fixed. + * + * This structure should also be used for string index 0, which contains the supported language IDs for + * the device as an array. + * + * This structure uses LUFA-specific element names to make each element's purpose clearer. + * + * \see \ref USB_StdDescriptor_String_t for the version of this type with standard element names. + */ + typedef struct + { + USB_Descriptor_Header_t Header; /**< Descriptor header, including type and size. */ + + wchar_t UnicodeString[]; /**< String data, as unicode characters (alternatively, + * string language IDs). If normal ASCII characters are + * to be used, they must be added as an array of characters + * rather than a normal C string so that they are widened to + * Unicode size. + * + * Under GCC, strings prefixed with the "L" character (before + * the opening string quotation mark) are considered to be + * Unicode strings, and may be used instead of an explicit + * array of ASCII characters. + */ + } USB_Descriptor_String_t; + + /** \brief Standard USB String Descriptor (USB-IF naming conventions). + * + * Type define for a standard string descriptor. Unlike other standard descriptors, the length + * of the descriptor for placement in the descriptor header must be determined by the \ref USB_STRING_LEN() + * macro rather than by the size of the descriptor structure, as the length is not fixed. + * + * This structure should also be used for string index 0, which contains the supported language IDs for + * the device as an array. + * + * This structure uses the relevant standard's given element names to ensure compatibility with the standard. + * + * \see \ref USB_Descriptor_String_t for the version of this type with with non-standard LUFA specific + * element names. + */ + typedef struct + { + uint8_t bLength; /**< Size of the descriptor, in bytes. */ + uint8_t bDescriptorType; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t + * or a value given by the specific class. + */ + int16_t bString[]; /**< String data, as unicode characters (alternatively, string language IDs). + * If normal ASCII characters are to be used, they must be added as an array + * of characters rather than a normal C string so that they are widened to + * Unicode size. + * + * Under GCC, strings prefixed with the "L" character (before the opening string + * quotation mark) are considered to be Unicode strings, and may be used instead + * of an explicit array of ASCII characters. + */ + } USB_StdDescriptor_String_t; + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Macros: */ + #define VERSION_TENS(x) (int)((x) / 10) + #define VERSION_ONES(x) (int)((x) - (10 * VERSION_TENS(x))) + #define VERSION_TENTHS(x) (int)(((x) - (int)(x)) * 10) + #define VERSION_HUNDREDTHS(x) (int)((((x) - (int)(x)) * 100) - (10 * VERSION_TENTHS(x))) + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/LUFA/Drivers/USB/Core/StdRequestType.h b/LUFA/Drivers/USB/Core/StdRequestType.h new file mode 100644 index 000000000..a8c3f0913 --- /dev/null +++ b/LUFA/Drivers/USB/Core/StdRequestType.h @@ -0,0 +1,247 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB control endpoint request definitions. + * + * This file contains structures and macros for the easy creation and parsing of standard USB control requests. + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_USB + * \defgroup Group_StdRequest Standard USB Requests + * + * This module contains definitions for the various control request parameters, so that the request + * details (such as data direction, request recipient, etc.) can be extracted via masking. + * + * @{ + */ + +#ifndef __STDREQTYPE_H__ +#define __STDREQTYPE_H__ + + /* Includes: */ + #include "../../../Common/Common.h" + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** Mask for the request type parameter, to indicate the direction of the request data (Host to Device + * or Device to Host). The result of this mask should then be compared to the request direction masks. + * + * \see REQDIR_* macros for masks indicating the request data direction. + */ + #define CONTROL_REQTYPE_DIRECTION 0x80 + + /** Mask for the request type parameter, to indicate the type of request (Device, Class or Vendor + * Specific). The result of this mask should then be compared to the request type masks. + * + * \see REQTYPE_* macros for masks indicating the request type. + */ + #define CONTROL_REQTYPE_TYPE 0x60 + + /** Mask for the request type parameter, to indicate the recipient of the request (Standard, Class + * or Vendor Specific). The result of this mask should then be compared to the request recipient + * masks. + * + * \see REQREC_* macros for masks indicating the request recipient. + */ + #define CONTROL_REQTYPE_RECIPIENT 0x1F + + /** \name Control Request Data Direction Masks */ + //@{ + /** Request data direction mask, indicating that the request data will flow from host to device. + * + * \see \ref CONTROL_REQTYPE_DIRECTION macro. + */ + #define REQDIR_HOSTTODEVICE (0 << 7) + + /** Request data direction mask, indicating that the request data will flow from device to host. + * + * \see \ref CONTROL_REQTYPE_DIRECTION macro. + */ + #define REQDIR_DEVICETOHOST (1 << 7) + //@} + + /** \name Control Request Type Masks */ + //@{ + /** Request type mask, indicating that the request is a standard request. + * + * \see \ref CONTROL_REQTYPE_TYPE macro. + */ + #define REQTYPE_STANDARD (0 << 5) + + /** Request type mask, indicating that the request is a class-specific request. + * + * \see \ref CONTROL_REQTYPE_TYPE macro. + */ + #define REQTYPE_CLASS (1 << 5) + + /** Request type mask, indicating that the request is a vendor specific request. + * + * \see \ref CONTROL_REQTYPE_TYPE macro. + */ + #define REQTYPE_VENDOR (2 << 5) + //@} + + /** \name Control Request Recipient Masks */ + //@{ + /** Request recipient mask, indicating that the request is to be issued to the device as a whole. + * + * \see \ref CONTROL_REQTYPE_RECIPIENT macro. + */ + #define REQREC_DEVICE (0 << 0) + + /** Request recipient mask, indicating that the request is to be issued to an interface in the + * currently selected configuration. + * + * \see \ref CONTROL_REQTYPE_RECIPIENT macro. + */ + #define REQREC_INTERFACE (1 << 0) + + /** Request recipient mask, indicating that the request is to be issued to an endpoint in the + * currently selected configuration. + * + * \see \ref CONTROL_REQTYPE_RECIPIENT macro. + */ + #define REQREC_ENDPOINT (2 << 0) + + /** Request recipient mask, indicating that the request is to be issued to an unspecified element + * in the currently selected configuration. + * + * \see \ref CONTROL_REQTYPE_RECIPIENT macro. + */ + #define REQREC_OTHER (3 << 0) + //@} + + /* Type Defines: */ + /** \brief Standard USB Control Request + * + * Type define for a standard USB control request. + * + * \see The USB 2.0 specification for more information on standard control requests. + */ + typedef struct + { + uint8_t bmRequestType; /**< Type of the request. */ + uint8_t bRequest; /**< Request command code. */ + uint16_t wValue; /**< wValue parameter of the request. */ + uint16_t wIndex; /**< wIndex parameter of the request. */ + uint16_t wLength; /**< Length of the data to transfer in bytes. */ + } USB_Request_Header_t; + + /* Enums: */ + /** Enumeration for the various standard request commands. These commands are applicable when the + * request type is \ref REQTYPE_STANDARD (with the exception of \ref REQ_GetDescriptor, which is always + * handled regardless of the request type value). + * + * \see Chapter 9 of the USB 2.0 Specification. + */ + enum USB_Control_Request_t + { + REQ_GetStatus = 0, /**< Implemented in the library for device, endpoint and interface + * recipients. Passed to the user application for other recipients + * via the \ref EVENT_USB_Device_ControlRequest() event when received in + * device mode. */ + REQ_ClearFeature = 1, /**< Implemented in the library for device, endpoint and interface + * recipients. Passed to the user application for other recipients + * via the \ref EVENT_USB_Device_ControlRequest() event when received in + * device mode. */ + REQ_SetFeature = 3, /**< Implemented in the library for device, endpoint and interface + * recipients. Passed to the user application for other recipients + * via the \ref EVENT_USB_Device_ControlRequest() event when received in + * device mode. */ + REQ_SetAddress = 5, /**< Implemented in the library for the device recipient. Passed + * to the user application for other recipients via the + * \ref EVENT_USB_Device_ControlRequest() event when received in + * device mode. */ + REQ_GetDescriptor = 6, /**< Implemented in the library for device and interface recipients. Passed to the + * user application for other recipients via the + * \ref EVENT_USB_Device_ControlRequest() event when received in + * device mode. */ + REQ_SetDescriptor = 7, /**< Not implemented in the library, passed to the user application + * via the \ref EVENT_USB_Device_ControlRequest() event when received in + * device mode. */ + REQ_GetConfiguration = 8, /**< Implemented in the library for the device recipient. Passed + * to the user application for other recipients via the + * \ref EVENT_USB_Device_ControlRequest() event when received in + * device mode. */ + REQ_SetConfiguration = 9, /**< Implemented in the library for the device recipient. Passed + * to the user application for other recipients via the + * \ref EVENT_USB_Device_ControlRequest() event when received in + * device mode. */ + REQ_GetInterface = 10, /**< Not implemented in the library, passed to the user application + * via the \ref EVENT_USB_Device_ControlRequest() event when received in + * device mode. */ + REQ_SetInterface = 11, /**< Not implemented in the library, passed to the user application + * via the \ref EVENT_USB_Device_ControlRequest() event when received in + * device mode. */ + REQ_SynchFrame = 12, /**< Not implemented in the library, passed to the user application + * via the \ref EVENT_USB_Device_ControlRequest() event when received in + * device mode. */ + }; + + /** Feature Selector values for Set Feature and Clear Feature standard control requests directed to the device, interface + * and endpoint recipients. + */ + enum USB_Feature_Selectors_t + { + FEATURE_SEL_EndpointHalt = 0x00, /**< Feature selector for Clear Feature or Set Feature commands. When + * used in a Set Feature or Clear Feature request this indicates that an + * endpoint (whose address is given elsewhere in the request should have + * its stall condition changed. + */ + FEATURE_SEL_DeviceRemoteWakeup = 0x01, /**< Feature selector for Device level Remote Wakeup enable set or clear. + * This feature can be controlled by the host on devices which indicate + * remote wakeup support in their descriptors to selectively disable or + * enable remote wakeup. + */ + FEATURE_SEL_TestMode = 0x02, /**< Feature selector for Test Mode features, used to test the USB controller + * to check for incorrect operation. + */ + }; + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Macros: */ + #define FEATURE_SELFPOWERED_ENABLED (1 << 0) + #define FEATURE_REMOTE_WAKEUP_ENABLED (1 << 1) + #endif + +#endif + +/** @} */ + diff --git a/LUFA/Drivers/USB/Core/Template/Template_Endpoint_Control_R.c b/LUFA/Drivers/USB/Core/Template/Template_Endpoint_Control_R.c new file mode 100644 index 000000000..e746b5124 --- /dev/null +++ b/LUFA/Drivers/USB/Core/Template/Template_Endpoint_Control_R.c @@ -0,0 +1,50 @@ +uint8_t TEMPLATE_FUNC_NAME (void* const Buffer, + uint16_t Length) +{ + uint8_t* DataStream = ((uint8_t*)Buffer + TEMPLATE_BUFFER_OFFSET(Length)); + + if (!(Length)) + Endpoint_ClearOUT(); + + while (Length) + { + uint8_t USB_DeviceState_LCL = USB_DeviceState; + + if (USB_DeviceState_LCL == DEVICE_STATE_Unattached) + return ENDPOINT_RWCSTREAM_DeviceDisconnected; + else if (USB_DeviceState_LCL == DEVICE_STATE_Suspended) + return ENDPOINT_RWCSTREAM_BusSuspended; + else if (Endpoint_IsSETUPReceived()) + return ENDPOINT_RWCSTREAM_HostAborted; + + if (Endpoint_IsOUTReceived()) + { + while (Length && Endpoint_BytesInEndpoint()) + { + TEMPLATE_TRANSFER_BYTE(DataStream); + TEMPLATE_BUFFER_MOVE(DataStream, 1); + Length--; + } + + Endpoint_ClearOUT(); + } + } + + while (!(Endpoint_IsINReady())) + { + uint8_t USB_DeviceState_LCL = USB_DeviceState; + + if (USB_DeviceState_LCL == DEVICE_STATE_Unattached) + return ENDPOINT_RWCSTREAM_DeviceDisconnected; + else if (USB_DeviceState_LCL == DEVICE_STATE_Suspended) + return ENDPOINT_RWCSTREAM_BusSuspended; + } + + return ENDPOINT_RWCSTREAM_NoError; +} + + +#undef TEMPLATE_BUFFER_OFFSET +#undef TEMPLATE_BUFFER_MOVE +#undef TEMPLATE_FUNC_NAME +#undef TEMPLATE_TRANSFER_BYTE diff --git a/LUFA/Drivers/USB/Core/Template/Template_Endpoint_Control_W.c b/LUFA/Drivers/USB/Core/Template/Template_Endpoint_Control_W.c new file mode 100644 index 000000000..bdbbcfc11 --- /dev/null +++ b/LUFA/Drivers/USB/Core/Template/Template_Endpoint_Control_W.c @@ -0,0 +1,58 @@ +uint8_t TEMPLATE_FUNC_NAME (const void* const Buffer, + uint16_t Length) +{ + uint8_t* DataStream = ((uint8_t*)Buffer + TEMPLATE_BUFFER_OFFSET(Length)); + bool LastPacketFull = false; + + if (Length > USB_ControlRequest.wLength) + Length = USB_ControlRequest.wLength; + else if (!(Length)) + Endpoint_ClearIN(); + + while (Length || LastPacketFull) + { + uint8_t USB_DeviceState_LCL = USB_DeviceState; + + if (USB_DeviceState_LCL == DEVICE_STATE_Unattached) + return ENDPOINT_RWCSTREAM_DeviceDisconnected; + else if (USB_DeviceState_LCL == DEVICE_STATE_Suspended) + return ENDPOINT_RWCSTREAM_BusSuspended; + else if (Endpoint_IsSETUPReceived()) + return ENDPOINT_RWCSTREAM_HostAborted; + else if (Endpoint_IsOUTReceived()) + break; + + if (Endpoint_IsINReady()) + { + uint16_t BytesInEndpoint = Endpoint_BytesInEndpoint(); + + while (Length && (BytesInEndpoint < USB_ControlEndpointSize)) + { + TEMPLATE_TRANSFER_BYTE(DataStream); + TEMPLATE_BUFFER_MOVE(DataStream, 1); + Length--; + BytesInEndpoint++; + } + + LastPacketFull = (BytesInEndpoint == USB_ControlEndpointSize); + Endpoint_ClearIN(); + } + } + + while (!(Endpoint_IsOUTReceived())) + { + uint8_t USB_DeviceState_LCL = USB_DeviceState; + + if (USB_DeviceState_LCL == DEVICE_STATE_Unattached) + return ENDPOINT_RWCSTREAM_DeviceDisconnected; + else if (USB_DeviceState_LCL == DEVICE_STATE_Suspended) + return ENDPOINT_RWCSTREAM_BusSuspended; + } + + return ENDPOINT_RWCSTREAM_NoError; +} + +#undef TEMPLATE_BUFFER_OFFSET +#undef TEMPLATE_BUFFER_MOVE +#undef TEMPLATE_FUNC_NAME +#undef TEMPLATE_TRANSFER_BYTE diff --git a/LUFA/Drivers/USB/Core/Template/Template_Endpoint_RW.c b/LUFA/Drivers/USB/Core/Template/Template_Endpoint_RW.c new file mode 100644 index 000000000..a46d7513b --- /dev/null +++ b/LUFA/Drivers/USB/Core/Template/Template_Endpoint_RW.c @@ -0,0 +1,54 @@ +uint8_t TEMPLATE_FUNC_NAME (TEMPLATE_BUFFER_TYPE const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) +{ + uint8_t* DataStream = ((uint8_t*)Buffer + TEMPLATE_BUFFER_OFFSET(Length)); + uint16_t BytesInTransfer = 0; + uint8_t ErrorCode; + + if ((ErrorCode = Endpoint_WaitUntilReady())) + return ErrorCode; + + if (BytesProcessed != NULL) + { + Length -= *BytesProcessed; + TEMPLATE_BUFFER_MOVE(DataStream, *BytesProcessed); + } + + while (Length) + { + if (!(Endpoint_IsReadWriteAllowed())) + { + TEMPLATE_CLEAR_ENDPOINT(); + + if (BytesProcessed != NULL) + { + *BytesProcessed += BytesInTransfer; + return ENDPOINT_RWSTREAM_IncompleteTransfer; + } + + #if !defined(INTERRUPT_CONTROL_ENDPOINT) + USB_USBTask(); + #endif + + if ((ErrorCode = Endpoint_WaitUntilReady())) + return ErrorCode; + } + else + { + TEMPLATE_TRANSFER_BYTE(DataStream); + TEMPLATE_BUFFER_MOVE(DataStream, 1); + Length--; + BytesInTransfer++; + } + } + + return ENDPOINT_RWSTREAM_NoError; +} + +#undef TEMPLATE_FUNC_NAME +#undef TEMPLATE_BUFFER_TYPE +#undef TEMPLATE_TRANSFER_BYTE +#undef TEMPLATE_CLEAR_ENDPOINT +#undef TEMPLATE_BUFFER_OFFSET +#undef TEMPLATE_BUFFER_MOVE diff --git a/LUFA/Drivers/USB/Core/Template/Template_Pipe_RW.c b/LUFA/Drivers/USB/Core/Template/Template_Pipe_RW.c new file mode 100644 index 000000000..147ce5ad4 --- /dev/null +++ b/LUFA/Drivers/USB/Core/Template/Template_Pipe_RW.c @@ -0,0 +1,53 @@ +uint8_t TEMPLATE_FUNC_NAME (TEMPLATE_BUFFER_TYPE const Buffer, + uint16_t Length, + uint16_t* const BytesProcessed) +{ + uint8_t* DataStream = ((uint8_t*)Buffer + TEMPLATE_BUFFER_OFFSET(Length)); + uint16_t BytesInTransfer = 0; + uint8_t ErrorCode; + + Pipe_SetPipeToken(TEMPLATE_TOKEN); + + if ((ErrorCode = Pipe_WaitUntilReady())) + return ErrorCode; + + if (BytesProcessed != NULL) + { + Length -= *BytesProcessed; + TEMPLATE_BUFFER_MOVE(DataStream, *BytesProcessed); + } + + while (Length) + { + if (!(Pipe_IsReadWriteAllowed())) + { + TEMPLATE_CLEAR_PIPE(); + + if (BytesProcessed != NULL) + { + *BytesProcessed += BytesInTransfer; + return PIPE_RWSTREAM_IncompleteTransfer; + } + + if ((ErrorCode = Pipe_WaitUntilReady())) + return ErrorCode; + } + else + { + TEMPLATE_TRANSFER_BYTE(DataStream); + TEMPLATE_BUFFER_MOVE(DataStream, 1); + Length--; + BytesInTransfer++; + } + } + + return PIPE_RWSTREAM_NoError; +} + +#undef TEMPLATE_FUNC_NAME +#undef TEMPLATE_BUFFER_TYPE +#undef TEMPLATE_TOKEN +#undef TEMPLATE_TRANSFER_BYTE +#undef TEMPLATE_CLEAR_PIPE +#undef TEMPLATE_BUFFER_OFFSET +#undef TEMPLATE_BUFFER_MOVE diff --git a/LUFA/Drivers/USB/Core/USBController.h b/LUFA/Drivers/USB/Core/USBController.h new file mode 100644 index 000000000..475aeb1bd --- /dev/null +++ b/LUFA/Drivers/USB/Core/USBController.h @@ -0,0 +1,67 @@ +/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2011.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief USB low level USB controller definitions.
+ *
+ * This file contains structures, function prototypes and macros related to the low level configuration of the
+ * USB controller, to start, stop and reset the USB library core.
+ *
+ * \note This file should not be included directly. It is automatically included as needed by the USB driver
+ * dispatch header located in LUFA/Drivers/USB/USB.h.
+ */
+
+/** \ingroup Group_USB
+ * \defgroup Group_USBManagement USB Interface Management
+ *
+ * Functions, macros, variables, enums and types related to the setup and management of the USB interface.
+ *
+ * @{
+ */
+
+#ifndef __USBCONTROLLER_H__
+#define __USBCONTROLLER_H__
+
+ /* Includes: */
+ #include "../../../Common/Common.h"
+
+ #if (ARCH == ARCH_AVR8)
+ #include "AVR8/USBController.h"
+ #endif
+
+ /* Preprocessor Checks and Defines: */
+ #if !defined(__INCLUDE_FROM_USB_DRIVER)
+ #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
+ #endif
+
+#endif
+
+/** @} */
+
diff --git a/LUFA/Drivers/USB/Core/USBInterrupt.h b/LUFA/Drivers/USB/Core/USBInterrupt.h new file mode 100644 index 000000000..00adc4014 --- /dev/null +++ b/LUFA/Drivers/USB/Core/USBInterrupt.h @@ -0,0 +1,57 @@ +/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2011.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ * \brief USB controller interrupt service routine management.
+ *
+ * This file contains definitions required for the correct handling of low level USB service routine interrupts
+ * from the USB controller.
+ *
+ * \note This file should not be included directly. It is automatically included as needed by the USB driver
+ * dispatch header located in LUFA/Drivers/USB/USB.h.
+ */
+
+#ifndef __USBINTERRUPT_H__
+#define __USBINTERRUPT_H__
+
+ /* Includes: */
+ #include "../../../Common/Common.h"
+
+ #if (ARCH == ARCH_AVR8)
+ #include "AVR8/USBInterrupt.h"
+ #endif
+
+ /* Preprocessor Checks: */
+ #if !defined(__INCLUDE_FROM_USB_DRIVER)
+ #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
+ #endif
+
+#endif
+
diff --git a/LUFA/Drivers/USB/Core/USBMode.h b/LUFA/Drivers/USB/Core/USBMode.h new file mode 100644 index 000000000..58f9927dc --- /dev/null +++ b/LUFA/Drivers/USB/Core/USBMode.h @@ -0,0 +1,138 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB mode and capability macros. + * + * This file defines macros indicating the type of USB controller the library is being compiled for, and its + * capabilities. These macros may then be referenced in the user application to selectively enable or disable + * code sections depending on if they are defined or not. + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_USB + * \defgroup Group_USBMode USB Mode Tokens + * + * After the inclusion of the master USB driver header, one or more of the following + * tokens may be defined, to allow the user code to conditionally enable or disable + * code based on the USB controller family and allowable USB modes. These tokens may + * be tested against to eliminate code relating to a USB mode which is not enabled for + * the given compilation. + * + * @{ + */ + +#ifndef __USBMODE_H__ +#define __USBMODE_H__ + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + #if defined(__DOXYGEN__) + /** Indicates that the target AVR microcontroller belongs to the Series 2 USB controller + * (i.e. AT90USBxxx2 or ATMEGAxxU2) when defined. + */ + #define USB_SERIES_2_AVR + + /** Indicates that the target AVR microcontroller belongs to the Series 4 USB controller + * (i.e. ATMEGAxxU4) when defined. + */ + #define USB_SERIES_4_AVR + + /** Indicates that the target AVR microcontroller belongs to the Series 6 USB controller + * (i.e. AT90USBxxx6) when defined. + */ + #define USB_SERIES_6_AVR + + /** Indicates that the target AVR microcontroller belongs to the Series 7 USB controller + * (i.e. AT90USBxxx7) when defined. + */ + #define USB_SERIES_7_AVR + + /** Indicates that the target AVR microcontroller and compilation settings allow for the + * target to be configured in USB Device mode when defined. + */ + #define USB_CAN_BE_DEVICE + + /** Indicates that the target AVR microcontroller and compilation settings allow for the + * target to be configured in USB Host mode when defined. + */ + #define USB_CAN_BE_HOST + + /** Indicates that the target AVR microcontroller and compilation settings allow for the + * target to be configured in either USB Device or Host mode when defined. + */ + #define USB_CAN_BE_BOTH + #else + /* Macros: */ + #if (defined(__AVR_AT90USB162__) || defined(__AVR_AT90USB82__) || \ + defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega8U2__)) + #define USB_SERIES_2_AVR + #elif (defined(__AVR_ATmega32U4__) || defined(__AVR_ATmega16U4__)) + #define USB_SERIES_4_AVR + #elif (defined(__AVR_ATmega32U6__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)) + #define USB_SERIES_6_AVR + #elif (defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1287__)) + #define USB_SERIES_7_AVR + #endif + + #if !defined(USB_SERIES_7_AVR) + #if defined(USB_HOST_ONLY) + #error USB_HOST_ONLY is not available for the currently selected USB AVR model. + #endif + + #if !defined(USB_DEVICE_ONLY) + #define USB_DEVICE_ONLY + #endif + #endif + + #if (!defined(USB_DEVICE_ONLY) && !defined(USB_HOST_ONLY)) + #define USB_CAN_BE_BOTH + #define USB_CAN_BE_HOST + #define USB_CAN_BE_DEVICE + #elif defined(USB_HOST_ONLY) + #define USB_CAN_BE_HOST + #elif defined(USB_DEVICE_ONLY) + #define USB_CAN_BE_DEVICE + #endif + + #if (defined(USB_HOST_ONLY) && defined(USB_DEVICE_ONLY)) + #error USB_HOST_ONLY and USB_DEVICE_ONLY are mutually exclusive. + #endif + #endif + +#endif + +/** @} */ diff --git a/LUFA/Drivers/USB/Core/USBTask.c b/LUFA/Drivers/USB/Core/USBTask.c new file mode 100644 index 000000000..c0cd7119f --- /dev/null +++ b/LUFA/Drivers/USB/Core/USBTask.c @@ -0,0 +1,89 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#define __INCLUDE_FROM_USBTASK_C +#define __INCLUDE_FROM_USB_DRIVER +#include "USBTask.h" + +volatile bool USB_IsInitialized; +USB_Request_Header_t USB_ControlRequest; + +#if defined(USB_CAN_BE_HOST) && !defined(HOST_STATE_AS_GPIOR) +volatile uint8_t USB_HostState; +#endif + +#if defined(USB_CAN_BE_DEVICE) && !defined(DEVICE_STATE_AS_GPIOR) +volatile uint8_t USB_DeviceState; +#endif + +void USB_USBTask(void) +{ + #if defined(USB_HOST_ONLY) + USB_HostTask(); + #elif defined(USB_DEVICE_ONLY) + USB_DeviceTask(); + #else + if (USB_CurrentMode == USB_MODE_Device) + USB_DeviceTask(); + else if (USB_CurrentMode == USB_MODE_Host) + USB_HostTask(); + #endif +} + +#if defined(USB_CAN_BE_DEVICE) +static void USB_DeviceTask(void) +{ + if (USB_DeviceState != DEVICE_STATE_Unattached) + { + uint8_t PrevEndpoint = Endpoint_GetCurrentEndpoint(); + + Endpoint_SelectEndpoint(ENDPOINT_CONTROLEP); + + if (Endpoint_IsSETUPReceived()) + USB_Device_ProcessControlRequest(); + + Endpoint_SelectEndpoint(PrevEndpoint); + } +} +#endif + +#if defined(USB_CAN_BE_HOST) +static void USB_HostTask(void) +{ + uint8_t PrevPipe = Pipe_GetCurrentPipe(); + + Pipe_SelectPipe(PIPE_CONTROLPIPE); + + USB_Host_ProcessNextHostState(); + + Pipe_SelectPipe(PrevPipe); +} +#endif + diff --git a/LUFA/Drivers/USB/Core/USBTask.h b/LUFA/Drivers/USB/Core/USBTask.h new file mode 100644 index 000000000..b5cf381aa --- /dev/null +++ b/LUFA/Drivers/USB/Core/USBTask.h @@ -0,0 +1,203 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Main USB service task management. + * + * This file contains the function definitions required for the main USB service task, which must be called + * from the user application to ensure that the USB connection to or from a connected USB device is maintained. + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +#ifndef __USBTASK_H__ +#define __USBTASK_H__ + + /* Includes: */ + #include "../../../Common/Common.h" + #include "USBController.h" + #include "Events.h" + #include "StdRequestType.h" + #include "StdDescriptors.h" + #include "USBMode.h" + + #if defined(USB_CAN_BE_DEVICE) + #include "DeviceStandardReq.h" + #endif + + #if defined(USB_CAN_BE_HOST) + #include "HostStandardReq.h" + #endif + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Global Variables: */ + /** Indicates if the USB interface is currently initialized but not necessarily connected to a host + * or device (i.e. if \ref USB_Init() has been run). If this is false, all other library globals related + * to the USB driver are invalid. + * + * \note This variable should be treated as read-only in the user application, and never manually + * changed in value. + * + * \ingroup Group_USBManagement + */ + extern volatile bool USB_IsInitialized; + + /** Structure containing the last received Control request when in Device mode (for use in user-applications + * inside of the \ref EVENT_USB_Device_ControlRequest() event, or for filling up with a control request to + * issue when in Host mode before calling \ref USB_Host_SendControlRequest(). + * + * \ingroup Group_USBManagement + */ + extern USB_Request_Header_t USB_ControlRequest; + + #if defined(USB_CAN_BE_HOST) || defined(__DOXYGEN__) + #if !defined(HOST_STATE_AS_GPIOR) || defined(__DOXYGEN__) + /** Indicates the current host state machine state. When in host mode, this indicates the state + * via one of the values of the \ref USB_Host_States_t enum values. + * + * This value may be altered by the user application to implement the \ref HOST_STATE_Addressed, + * \ref HOST_STATE_Configured and \ref HOST_STATE_Suspended states which are not implemented by + * the library internally. + * + * To reduce program size and speed up checks of this global on the AVR8 architecture, it can be + * placed into one of the AVR's GPIOR hardware registers instead of RAM by defining the + * HOST_STATE_AS_GPIOR token to a value between 0 and 2 in the project makefile and passing it to + * the compiler via the -D switch. When defined, the corresponding GPIOR register should not be used + * in the user application except implicitly via the library APIs. + * + * \note This global is only present if the user application can be a USB host. + * + * \see \ref USB_Host_States_t for a list of possible device states. + * + * \ingroup Group_Host + */ + extern volatile uint8_t USB_HostState; + #else + #define _GET_HOST_GPIOR_NAME2(y) GPIOR ## y + #define _GET_HOST_GPIOR_NAME(x) _GET_HOST_GPIOR_NAME2(x) + #define USB_HostState _GET_HOST_GPIOR_NAME(HOST_STATE_AS_GPIOR) + #endif + #endif + + #if defined(USB_CAN_BE_DEVICE) || defined(__DOXYGEN__) + #if !defined(DEVICE_STATE_AS_GPIOR) || defined(__DOXYGEN__) + /** Indicates the current device state machine state. When in device mode, this indicates the state + * via one of the values of the \ref USB_Device_States_t enum values. + * + * This value should not be altered by the user application as it is handled automatically by the + * library. The only exception to this rule is if the NO_LIMITED_CONTROLLER_CONNECT token is used + * (see \ref EVENT_USB_Device_Connect() and \ref EVENT_USB_Device_Disconnect() events). + * + * To reduce program size and speed up checks of this global on the AVR8 architecture, it can be + * placed into one of the AVR's GPIOR hardware registers instead of RAM by defining the + * DEVICE_STATE_AS_GPIOR token to a value between 0 and 2 in the project makefile and passing it to + * the compiler via the -D switch. When defined, the corresponding GPIOR register should not be used + * in the user application except implicitly via the library APIs. + * + * \note This global is only present if the user application can be a USB device. + * \n\n + * + * \note This variable should be treated as read-only in the user application, and never manually + * changed in value except in the circumstances outlined above. + * + * \see \ref USB_Device_States_t for a list of possible device states. + * + * \ingroup Group_Device + */ + extern volatile uint8_t USB_DeviceState; + #else + #define _GET_DEVICE_GPIOR_NAME2(y) GPIOR ## y + #define _GET_DEVICE_GPIOR_NAME(x) _GET_DEVICE_GPIOR_NAME2(x) + #define USB_DeviceState _GET_DEVICE_GPIOR_NAME(DEVICE_STATE_AS_GPIOR) + #endif + #endif + + /* Function Prototypes: */ + /** This is the main USB management task. The USB driver requires this task to be executed + * continuously when the USB system is active (device attached in host mode, or attached to a host + * in device mode) in order to manage USB communications. This task may be executed inside an RTOS, + * fast timer ISR or the main user application loop. + * + * The USB task must be serviced within 30ms while in device mode, or within 1ms while in host mode. + * The task may be serviced at all times, or (for minimum CPU consumption): + * + * - In device mode, it may be disabled at start-up, enabled on the firing of the \ref EVENT_USB_Device_Connect() + * event and disabled again on the firing of the \ref EVENT_USB_Device_Disconnect() event. + * + * - In host mode, it may be disabled at start-up, enabled on the firing of the \ref EVENT_USB_Host_DeviceAttached() + * event and disabled again on the firing of the \ref EVENT_USB_Host_DeviceEnumerationComplete() or + * \ref EVENT_USB_Host_DeviceEnumerationFailed() events. + * + * If in device mode (only), the control endpoint can instead be managed via interrupts entirely by the library + * by defining the INTERRUPT_CONTROL_ENDPOINT token and passing it to the compiler via the -D switch. + * + * \see \ref Group_Events for more information on the USB events. + * + * \ingroup Group_USBManagement + */ + void USB_USBTask(void); + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Function Prototypes: */ + #if defined(__INCLUDE_FROM_USBTASK_C) + #if defined(USB_CAN_BE_HOST) + static void USB_HostTask(void); + #endif + + #if defined(USB_CAN_BE_DEVICE) + static void USB_DeviceTask(void); + #endif + #endif + + /* Macros: */ + #define HOST_TASK_NONBLOCK_WAIT(Duration, NextState) MACROS{ USB_HostState = HOST_STATE_WaitForDevice; \ + WaitMSRemaining = (Duration); \ + PostWaitState = (NextState); }MACROE + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + |