diff options
Diffstat (limited to 'LUFA/Drivers/USB/LowLevel/Endpoint.h')
| -rw-r--r-- | LUFA/Drivers/USB/LowLevel/Endpoint.h | 21 |
1 files changed, 16 insertions, 5 deletions
diff --git a/LUFA/Drivers/USB/LowLevel/Endpoint.h b/LUFA/Drivers/USB/LowLevel/Endpoint.h index 389d3c458..b18ff456d 100644 --- a/LUFA/Drivers/USB/LowLevel/Endpoint.h +++ b/LUFA/Drivers/USB/LowLevel/Endpoint.h @@ -405,15 +405,13 @@ #define Endpoint_ClearSETUP() MACROS{ UEINTX &= ~(1 << RXSTPI); }MACROE
#if !defined(CONTROL_ONLY_DEVICE)
- #define Endpoint_ClearIN() MACROS{ uint8_t Temp = UEINTX; UEINTX = (Temp & ~(1 << TXINI)); \
- UEINTX = (Temp & ~(1 << FIFOCON)); }MACROE
+ #define Endpoint_ClearIN() MACROS{ UEINTX &= ~((1 << TXINI) | (1 << FIFOCON)); }MACROE
#else
#define Endpoint_ClearIN() MACROS{ UEINTX &= ~(1 << TXINI); }MACROE
#endif
#if !defined(CONTROL_ONLY_DEVICE)
- #define Endpoint_ClearOUT() MACROS{ uint8_t Temp = UEINTX; UEINTX = (Temp & ~(1 << RXOUTI)); \
- UEINTX = (Temp & ~(1 << FIFOCON)); }MACROE
+ #define Endpoint_ClearOUT() MACROS{ UEINTX &= ~((1 << RXOUTI) | (1 << FIFOCON)); }MACROE
#else
#define Endpoint_ClearOUT() MACROS{ UEINTX &= ~(1 << RXOUTI); }MACROE
#endif
@@ -747,7 +745,8 @@ * The banking mode may be either \ref ENDPOINT_BANK_SINGLE or \ref ENDPOINT_BANK_DOUBLE.
*
* \note The default control endpoint does not have to be manually configured, as it is automatically
- * configured by the library internally.
+ * configured by the library internally.
+ * \n\n
*
* \note This routine will select the specified endpoint, and the endpoint will remain selected
* once the routine completes regardless of if the endpoint configuration succeeds.
@@ -971,6 +970,7 @@ *
* \note This function automatically clears the control transfer's status stage. Do not manually attempt
* to clear the status stage when using this routine in a control transaction.
+ * \n\n
*
* \note This routine should only be used on CONTROL type endpoints.
*
@@ -990,6 +990,7 @@ *
* \note This function automatically clears the control transfer's status stage. Do not manually attempt
* to clear the status stage when using this routine in a control transaction.
+ * \n\n
*
* \note This routine should only be used on CONTROL type endpoints.
*
@@ -1009,8 +1010,10 @@ *
* \note This function automatically clears the control transfer's status stage. Do not manually attempt
* to clear the status stage when using this routine in a control transaction.
+ * \n\n
*
* \note The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
+ * \n\n
*
* \note This routine should only be used on CONTROL type endpoints.
*
@@ -1033,6 +1036,7 @@ *
* \note This function automatically clears the control transfer's status stage. Do not manually attempt
* to clear the status stage when using this routine in a control transaction.
+ * \n\n
*
* \note This routine should only be used on CONTROL type endpoints.
*
@@ -1052,6 +1056,7 @@ *
* \note This function automatically clears the control transfer's status stage. Do not manually attempt
* to clear the status stage when using this routine in a control transaction.
+ * \n\n
*
* \note This routine should only be used on CONTROL type endpoints.
*
@@ -1071,8 +1076,10 @@ *
* \note This function automatically clears the control transfer's status stage. Do not manually attempt
* to clear the status stage when using this routine in a control transaction.
+ * \n\n
*
* \note The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
+ * \n\n
*
* \note This routine should only be used on CONTROL type endpoints.
*
@@ -1095,6 +1102,7 @@ *
* \note This function automatically clears the control transfer's status stage. Do not manually attempt
* to clear the status stage when using this routine in a control transaction.
+ * \n\n
*
* \note This routine should only be used on CONTROL type endpoints.
*
@@ -1114,6 +1122,7 @@ *
* \note This function automatically clears the control transfer's status stage. Do not manually attempt
* to clear the status stage when using this routine in a control transaction.
+ * \n\n
*
* \note This routine should only be used on CONTROL type endpoints.
*
@@ -1136,6 +1145,7 @@ *
* \note This function automatically clears the control transfer's status stage. Do not manually attempt
* to clear the status stage when using this routine in a control transaction.
+ * \n\n
*
* \note This routine should only be used on CONTROL type endpoints.
*
@@ -1155,6 +1165,7 @@ *
* \note This function automatically clears the control transfer's status stage. Do not manually attempt
* to clear the status stage when using this routine in a control transaction.
+ * \n\n
*
* \note This routine should only be used on CONTROL type endpoints.
*
|