diff options
Diffstat (limited to 'LUFA/Drivers')
-rw-r--r-- | LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.h | 48 | ||||
-rw-r--r-- | LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.h | 37 | ||||
-rw-r--r-- | LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.c | 74 | ||||
-rw-r--r-- | LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h | 87 |
4 files changed, 124 insertions, 122 deletions
diff --git a/LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.h b/LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.h index 805e8f9ba..f0a472ed6 100644 --- a/LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.h +++ b/LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.h @@ -81,12 +81,12 @@ * \note Restrictions apply on the number, size and type of endpoints which can be used
* when running in low speed mode - refer to the USB 2.0 specification.
*/
- #define USB_DEVICE_OPT_LOWSPEED (1 << 0)
+ #define USB_DEVICE_OPT_LOWSPEED (1 << 0)
/** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the
* USB interface should be initialized in full speed (12Mb/s) mode.
*/
- #define USB_DEVICE_OPT_FULLSPEED (0 << 0)
+ #define USB_DEVICE_OPT_FULLSPEED (0 << 0)
//@}
/** String descriptor index for the device's unique serial number string descriptor within the device.
@@ -98,17 +98,17 @@ * On unsupported devices, this will evaluate to \ref NO_DESCRIPTOR and so will force the host to create a pseudo-serial
* number for the device.
*/
- #define USE_INTERNAL_SERIAL NO_DESCRIPTOR
+ #define USE_INTERNAL_SERIAL 0xDC
/** Length of the device's unique internal serial number, in bits, if present on the selected microcontroller
* model.
*/
- #define INTERNAL_SERIAL_LENGTH_BITS 0
+ #define INTERNAL_SERIAL_LENGTH_BITS 112
/** Start address of the internal serial number, in the appropriate address space, if present on the selected microcontroller
* model.
*/
- #define INTERNAL_SERIAL_START_ADDRESS 0
+ #define INTERNAL_SERIAL_START_ADDRESS 0x08
/* Function Prototypes: */
/** Sends a Remote Wakeup request to the host. This signals to the host that the device should
@@ -173,34 +173,58 @@ static inline void USB_Device_SetLowSpeed(void) ATTR_ALWAYS_INLINE;
static inline void USB_Device_SetLowSpeed(void)
{
- // TODO
+ USB.CTRLA &= ~USB_SPEED_bm;
}
static inline void USB_Device_SetFullSpeed(void) ATTR_ALWAYS_INLINE;
static inline void USB_Device_SetFullSpeed(void)
{
- // TODO
+ USB.CTRLA |= USB_SPEED_bm;
}
static inline void USB_Device_SetDeviceAddress(const uint8_t Address) ATTR_ALWAYS_INLINE;
static inline void USB_Device_SetDeviceAddress(const uint8_t Address)
{
- // TODO
+ USB.ADDR = Address;
}
static inline bool USB_Device_IsAddressSet(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
static inline bool USB_Device_IsAddressSet(void)
{
- return false; // TODO
+ return ((USB.ADDR != 0) ? true : false);
}
- #if (USE_INTERNAL_SERIAL != NO_DESCRIPTOR)
static inline void USB_Device_GetSerialString(uint16_t* const UnicodeString) ATTR_NON_NULL_PTR_ARG(1);
static inline void USB_Device_GetSerialString(uint16_t* const UnicodeString)
{
- // TODO
+ uint_reg_t CurrentGlobalInt = GetGlobalInterruptMask();
+ GlobalInterruptDisable();
+
+ uint8_t SigReadAddress = INTERNAL_SERIAL_START_ADDRESS;
+
+ for (uint8_t SerialCharNum = 0; SerialCharNum < (INTERNAL_SERIAL_LENGTH_BITS / 4); SerialCharNum++)
+ {
+ uint8_t SerialByte;
+
+ NVM.CMD = NVM_CMD_READ_CALIB_ROW_gc;
+ SerialByte = pgm_read_byte(SigReadAddress);
+
+ if (SerialCharNum & 0x01)
+ {
+ SerialByte >>= 4;
+ SigReadAddress++;
+ }
+
+ SerialByte &= 0x0F;
+
+ UnicodeString[SerialCharNum] = cpu_to_le16((SerialByte >= 10) ?
+ (('A' - 10) + SerialByte) : ('0' + SerialByte));
+ }
+
+ SetGlobalInterruptMask(CurrentGlobalInt);
+
+
}
- #endif
#endif
diff --git a/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.h b/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.h index e43422ef5..c444433a6 100644 --- a/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.h +++ b/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.h @@ -90,33 +90,10 @@ /* Private Interface - For use in library only: */
#if !defined(__DOXYGEN__)
/* Macros: */
- #define _ENDPOINT_GET_MAXSIZE(EPIndex) _ENDPOINT_GET_MAXSIZE2(ENDPOINT_DETAILS_EP ## EPIndex)
- #define _ENDPOINT_GET_MAXSIZE2(EPDetails) _ENDPOINT_GET_MAXSIZE3(EPDetails)
- #define _ENDPOINT_GET_MAXSIZE3(MaxSize, Banks) (MaxSize)
-
- #define _ENDPOINT_GET_BANKS(EPIndex) _ENDPOINT_GET_BANKS2(ENDPOINT_DETAILS_EP ## EPIndex)
- #define _ENDPOINT_GET_BANKS2(EPDetails) _ENDPOINT_GET_BANKS3(EPDetails)
- #define _ENDPOINT_GET_BANKS3(MaxSize, Banks) (Banks)
-
- #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)
- #define ENDPOINT_DETAILS_MAXEP 7
-
- #define ENDPOINT_DETAILS_EP0 64, 1
- #define ENDPOINT_DETAILS_EP1 256, 2
- #define ENDPOINT_DETAILS_EP2 64, 2
- #define ENDPOINT_DETAILS_EP3 64, 2
- #define ENDPOINT_DETAILS_EP4 64, 2
- #define ENDPOINT_DETAILS_EP5 64, 2
- #define ENDPOINT_DETAILS_EP6 64, 2
- #else
- #define ENDPOINT_DETAILS_MAXEP 5
+ #define _ENDPOINT_GET_MAXSIZE(EPIndex) 1023
+ #define _ENDPOINT_GET_BANKS(EPIndex) 2
- #define ENDPOINT_DETAILS_EP0 64, 1
- #define ENDPOINT_DETAILS_EP1 64, 1
- #define ENDPOINT_DETAILS_EP2 64, 1
- #define ENDPOINT_DETAILS_EP3 64, 2
- #define ENDPOINT_DETAILS_EP4 64, 2
- #endif
+ #define ENDPOINT_DETAILS_MAXEP 16
/* Inline Functions: */
static inline uint8_t Endpoint_BytesToEPSizeMask(const uint16_t Bytes) ATTR_WARN_UNUSED_RESULT ATTR_CONST
@@ -141,12 +118,12 @@ /** Endpoint data direction mask for \ref Endpoint_ConfigureEndpoint(). This indicates that the endpoint
* should be initialized in the OUT direction - i.e. data flows from host to device.
*/
- #define ENDPOINT_DIR_OUT (0 << EPDIR)
+ #define ENDPOINT_DIR_OUT 0 // TODO
/** Endpoint data direction mask for \ref Endpoint_ConfigureEndpoint(). This indicates that the endpoint
* should be initialized in the IN direction - i.e. data flows from device to host.
*/
- #define ENDPOINT_DIR_IN (1 << EPDIR)
+ #define ENDPOINT_DIR_IN 0 // TODO
//@}
/** \name Endpoint Bank Mode Masks */
@@ -156,14 +133,14 @@ * in slower transfers as only one USB device (the AVR or the host) can access the endpoint's
* bank at the one time.
*/
- #define ENDPOINT_BANK_SINGLE (0 << EPBK0)
+ #define ENDPOINT_BANK_SINGLE 0 // TODO
/** Mask for the bank mode selection for the \ref Endpoint_ConfigureEndpoint() macro. This indicates
* that the endpoint should have two banks, which requires more USB FIFO memory but results
* in faster transfers as one USB device (the AVR or the host) can access one bank while the other
* accesses the second bank.
*/
- #define ENDPOINT_BANK_DOUBLE (1 << EPBK0)
+ #define ENDPOINT_BANK_DOUBLE 0 // TODO
//@}
#if (!defined(FIXED_CONTROL_ENDPOINT_SIZE) || defined(__DOXYGEN__))
diff --git a/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.c b/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.c index 52d44fead..2556ee858 100644 --- a/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.c +++ b/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.c @@ -56,22 +56,88 @@ void USB_Init( #endif
)
{
- // TODO
+ #if !defined(USE_STATIC_OPTIONS)
+ USB_Options = Options;
+ #endif
+
+ USB_IsInitialized = true;
+
+ USB_ResetInterface();
}
void USB_Disable(void)
{
- // TODO
+ USB_INT_DisableAllInterrupts();
+ USB_INT_ClearAllInterrupts();
+
+ USB_Detach();
+ USB_Controller_Disable();
+
+ USB_IsInitialized = false;
}
void USB_ResetInterface(void)
{
- // TODO
+ USB_INT_DisableAllInterrupts();
+ USB_INT_ClearAllInterrupts();
+
+ USB_Controller_Reset();
+ USB_Init_Device();
}
#if defined(USB_CAN_BE_DEVICE)
static void USB_Init_Device(void)
{
- // TODO
+ USB_DeviceState = DEVICE_STATE_Unattached;
+ USB_Device_ConfigurationNumber = 0;
+
+ #if !defined(NO_DEVICE_REMOTE_WAKEUP)
+ USB_Device_RemoteWakeupEnabled = false;
+ #endif
+
+ #if !defined(NO_DEVICE_SELF_POWER)
+ USB_Device_CurrentlySelfPowered = false;
+ #endif
+
+ #if !defined(FIXED_CONTROL_ENDPOINT_SIZE)
+ USB_Descriptor_Device_t* DeviceDescriptorPtr;
+
+ #if defined(ARCH_HAS_MULTI_ADDRESS_SPACE) && \
+ !(defined(USE_FLASH_DESCRIPTORS) || defined(USE_EEPROM_DESCRIPTORS) || defined(USE_RAM_DESCRIPTORS))
+ uint8_t DescriptorAddressSpace;
+
+ if (CALLBACK_USB_GetDescriptor((DTYPE_Device << 8), 0, (void*)&DeviceDescriptorPtr, &DescriptorAddressSpace) != NO_DESCRIPTOR)
+ {
+ if (DescriptorAddressSpace == MEMSPACE_FLASH)
+ USB_Device_ControlEndpointSize = pgm_read_byte(&DeviceDescriptorPtr->Endpoint0Size);
+ else if (DescriptorAddressSpace == MEMSPACE_EEPROM)
+ USB_Device_ControlEndpointSize = eeprom_read_byte(&DeviceDescriptorPtr->Endpoint0Size);
+ else
+ USB_Device_ControlEndpointSize = DeviceDescriptorPtr->Endpoint0Size;
+ }
+ #else
+ if (CALLBACK_USB_GetDescriptor((DTYPE_Device << 8), 0, (void*)&DeviceDescriptorPtr) != NO_DESCRIPTOR)
+ {
+ #if defined(USE_RAM_DESCRIPTORS)
+ USB_Device_ControlEndpointSize = DeviceDescriptorPtr->Endpoint0Size;
+ #elif defined(USE_EEPROM_DESCRIPTORS)
+ USB_Device_ControlEndpointSize = eeprom_read_byte(&DeviceDescriptorPtr->Endpoint0Size);
+ #else
+ USB_Device_ControlEndpointSize = pgm_read_byte(&DeviceDescriptorPtr->Endpoint0Size);
+ #endif
+ }
+ #endif
+ #endif
+
+ if (USB_Options & USB_DEVICE_OPT_LOWSPEED)
+ USB_Device_SetLowSpeed();
+ else
+ USB_Device_SetFullSpeed();
+
+ Endpoint_ConfigureEndpoint(ENDPOINT_CONTROLEP, EP_TYPE_CONTROL,
+ ENDPOINT_DIR_OUT, USB_Device_ControlEndpointSize,
+ ENDPOINT_BANK_SINGLE);
+
+ USB_Attach();
}
#endif
diff --git a/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h b/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h index 8be4ed2e1..f5adc1200 100644 --- a/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h +++ b/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h @@ -77,62 +77,32 @@ #endif
/* Public Interface - May be used in end-application: */
- /* Macros: */
- /** \name USB Controller Option Masks */
- //@{
- /** Regulator disable option mask for \ref USB_Init(). This indicates that the internal 3.3V USB data pad
- * regulator should be disabled and the AVR's VCC level used for the data pads.
- *
- * \note See USB AVR data sheet for more information on the internal pad regulator.
- */
- #define USB_OPT_REG_DISABLED (1 << 1)
-
- /** Regulator enable option mask for \ref USB_Init(). This indicates that the internal 3.3V USB data pad
- * regulator should be enabled to regulate the data pin voltages from the VBUS level down to a level within
- * the range allowable by the USB standard.
- *
- * \note See USB AVR data sheet for more information on the internal pad regulator.
- */
- #define USB_OPT_REG_ENABLED (0 << 1)
-
- /** Manual PLL control option mask for \ref USB_Init(). This indicates to the library that the user application
- * will take full responsibility for controlling the AVR's PLL (used to generate the high frequency clock
- * that the USB controller requires) and ensuring that it is locked at the correct frequency for USB operations.
- */
- #define USB_OPT_MANUAL_PLL (1 << 2)
-
- /** Automatic PLL control option mask for \ref USB_Init(). This indicates to the library that the library should
- * take full responsibility for controlling the AVR's PLL (used to generate the high frequency clock
- * that the USB controller requires) and ensuring that it is locked at the correct frequency for USB operations.
- */
- #define USB_OPT_AUTO_PLL (0 << 2)
- //@}
-
+ /* Macros: */
/** \name Endpoint/Pipe Type Masks */
//@{
/** Mask for a CONTROL type endpoint or pipe.
*
* \note See \ref Group_EndpointManagement and \ref Group_PipeManagement for endpoint/pipe functions.
*/
- #define EP_TYPE_CONTROL 0x00
+ #define EP_TYPE_CONTROL 0x00
/** Mask for an ISOCHRONOUS type endpoint or pipe.
*
* \note See \ref Group_EndpointManagement and \ref Group_PipeManagement for endpoint/pipe functions.
*/
- #define EP_TYPE_ISOCHRONOUS 0x01
+ #define EP_TYPE_ISOCHRONOUS 0x01
/** Mask for a BULK type endpoint or pipe.
*
* \note See \ref Group_EndpointManagement and \ref Group_PipeManagement for endpoint/pipe functions.
*/
- #define EP_TYPE_BULK 0x02
+ #define EP_TYPE_BULK 0x02
/** Mask for an INTERRUPT type endpoint or pipe.
*
* \note See \ref Group_EndpointManagement and \ref Group_PipeManagement for endpoint/pipe functions.
*/
- #define EP_TYPE_INTERRUPT 0x03
+ #define EP_TYPE_INTERRUPT 0x03
//@}
#if !defined(USB_STREAM_TIMEOUT_MS) || defined(__DOXYGEN__)
@@ -147,18 +117,6 @@ #endif
/* Inline Functions: */
- /** Determines if the VBUS line is currently high (i.e. the USB host is supplying power).
- *
- * \note This function is not available on some AVR models which do not support hardware VBUS monitoring.
- *
- * \return Boolean \c true if the VBUS line is currently detecting power from a host, \c false otherwise.
- */
- static inline bool USB_VBUS_GetStatus(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool USB_VBUS_GetStatus(void)
- {
- return 0; // TODO
- }
-
/** Detaches the device from the USB bus. This has the effect of removing the device from any
* attached host, ceasing USB communications. If no host is present, this prevents any host from
* enumerating the device once attached until \ref USB_Attach() is called.
@@ -166,7 +124,7 @@ static inline void USB_Detach(void) ATTR_ALWAYS_INLINE;
static inline void USB_Detach(void)
{
- // TODO
+ USB.CTRLB &= ~USB_ATTACH_bm;
}
/** Attaches the device to the USB bus. This announces the device's presence to any attached
@@ -180,7 +138,7 @@ static inline void USB_Attach(void) ATTR_ALWAYS_INLINE;
static inline void USB_Attach(void)
{
- // TODO
+ USB.CTRLB |= USB_ATTACH_bm;
}
/* Function Prototypes: */
@@ -304,46 +262,23 @@ #endif
/* Inline Functions: */
- static inline void USB_REG_On(void) ATTR_ALWAYS_INLINE;
- static inline void USB_REG_On(void)
- {
- // TODO
- }
-
- static inline void USB_REG_Off(void) ATTR_ALWAYS_INLINE;
- static inline void USB_REG_Off(void)
- {
- // TODO
- }
-
- static inline void USB_CLK_Freeze(void) ATTR_ALWAYS_INLINE;
- static inline void USB_CLK_Freeze(void)
- {
- // TODO
- }
-
- static inline void USB_CLK_Unfreeze(void) ATTR_ALWAYS_INLINE;
- static inline void USB_CLK_Unfreeze(void)
- {
- // TODO
- }
-
static inline void USB_Controller_Enable(void) ATTR_ALWAYS_INLINE;
static inline void USB_Controller_Enable(void)
{
- // TODO
+ USB.CTRLA |= (USB_ENABLE_bm | USB_STFRNUM_bm | USB_MAXEP_gm);
}
static inline void USB_Controller_Disable(void) ATTR_ALWAYS_INLINE;
static inline void USB_Controller_Disable(void)
{
- // TODO
+ USB.CTRLA &= ~USB_ENABLE_bm;
}
static inline void USB_Controller_Reset(void) ATTR_ALWAYS_INLINE;
static inline void USB_Controller_Reset(void)
{
- // TODO
+ USB.CTRLA &= ~USB_ENABLE_bm;
+ USB.CTRLA |= USB_ENABLE_bm;
}
#endif
|