aboutsummaryrefslogtreecommitdiffstats
path: root/LUFA/ManPages/MigrationInformation.txt
diff options
context:
space:
mode:
Diffstat (limited to 'LUFA/ManPages/MigrationInformation.txt')
-rw-r--r--LUFA/ManPages/MigrationInformation.txt294
1 files changed, 144 insertions, 150 deletions
diff --git a/LUFA/ManPages/MigrationInformation.txt b/LUFA/ManPages/MigrationInformation.txt
index 8f8fbcd29..f9538dab6 100644
--- a/LUFA/ManPages/MigrationInformation.txt
+++ b/LUFA/ManPages/MigrationInformation.txt
@@ -14,41 +14,47 @@
* <b>Non-USB Library Components</b>
* - The TWI driver \ref TWI_StartTransmission() function return type has now changed, so that the function returns an
* error code from the \ref TWI_ErrorCodes_t enum instead of a boolean success flag. Existing code must now check
- * against the \ref TWI_ERROR_NoError return value for success instead of a boolean true value, or it will not function
+ * against the \ref TWI_ERROR_NoError return value for success instead of a boolean \c true value, or it will not function
* correctly.
+ * - The Serial Stream driver has been removed, and its functionality rolled into the regular serial driver. Existing code
+ * should remove references to the \c LUFA_SRC_SERIALSTREAM module in their makefiles, include the regular Serial driver
+ * header instead and call the regular \ref Serial_Init() function followed by the new \ref Serial_CreateStream() function
+ * with a \c NULL parameter.
+ * - The \ref Serial_ReceiveByte() function has changed, and now returns a signed 16-bit integer, with -1 indicating no data was
+ * received.
*
* <b>USB Core</b>
* - By default, unordered Endpoint and Pipe configuration is now allowed once again, via the previous workaround of
* reconfiguring all Endpoints/Pipes in order each time a new Endpoint/Pipe is created. To minimise the compiled program
- * size, the new ORDERED_EP_CONFIG compile time option may be defined in the project makefile to restrict the ordering
+ * size, the new \c ORDERED_EP_CONFIG compile time option may be defined in the project makefile to restrict the ordering
* in exchange for a smaller compiled binary size.
*
* <b>Device Mode</b>
- * - The Endpoint stream functions now all require a BytesProcessed parameter instead of the previous callback parameter.
- * This should be set to NULL to retain previous behaviour of the functions, or point to a location where the number of bytes
- * processed in the current transaction can be stored. If the BytesProcessed parameter is non-NULL, each time the endpoint
+ * - The Endpoint stream functions now all require a \c BytesProcessed parameter instead of the previous callback parameter.
+ * This should be set to \c NULL to retain previous behaviour of the functions, or point to a location where the number of bytes
+ * processed in the current transaction can be stored. If the \c BytesProcessed parameter is non \c NULL, each time the endpoint
* bank becomes full and the packet is sent, the routine will exit with the new \ref ENDPOINT_RWSTREAM_IncompleteTransfer
* error code to allow the user application to determine when to send the next chunk of data.
*
* <b>Host Mode</b>
- * - The Pipe stream functions now all require a BytesProcessed parameter instead of the previous callback parameter.
- * This should be set to NULL to retain previous behaviour of the functions, or point to a location where the number of bytes
- * processed in the current transaction can be stored. If the BytesProcessed parameter is non-NULL, each time the pipe
+ * - The Pipe stream functions now all require a \c BytesProcessed parameter instead of the previous callback parameter.
+ * This should be set to \c NULL to retain previous behaviour of the functions, or point to a location where the number of bytes
+ * processed in the current transaction can be stored. If the BytesProcessed parameter is non \c NULL, each time the pipe
* bank becomes full and the packet is sent, the routine will exit with the new \ref PIPE_RWSTREAM_IncompleteTransfer
* error code to allow the user application to determine when to send the next chunk of data.
*
* \section Sec_Migration101122 Migrating from 100807 to 101122
* <b>USB Core</b>
- * - A new USB driver source file, Drivers/USB/HighLevel/EndpointStream.c now exists. This source file should be added
+ * - A new USB driver source file, \c Drivers/USB/HighLevel/EndpointStream.c now exists. This source file should be added
* to all project makefiles using the USB driver of LUFA, or the makefile should be updated to use the new module source
* variables.
- * - A new USB driver source file, Drivers/USB/HighLevel/PipeStream.c now exists. This source file should be added to all
+ * - A new USB driver source file, \c Drivers/USB/HighLevel/PipeStream.c now exists. This source file should be added to all
* project makefiles using the USB driver of LUFA, or the makefile should be updated to use the new module source variables.
- * - The EVENT_USB_InitFailure() event has been removed, as the USB_Init() function will no longer fail; if not USB mode is
+ * - The \c EVENT_USB_InitFailure() event has been removed, as the \ref USB_Init() function will no longer fail; if not USB mode is
* specified, the controller will default to UID selection mode.
* - The USB mode specifier constants have been moved into a new enum and renamed. Existing projects should use the equivalent
* value in the new \ref USB_Modes_t enum.
- * - All class driver headers are now included as part of the standard LUFA/Drivers/USB/USB.h master dispatch header, and should
+ * - All class driver headers are now included as part of the standard \c LUFA/Drivers/USB/USB.h master dispatch header, and should
* no longer be included separately. Class driver module source files must still be added as a separate module in the project's
* makefile if used.
*
@@ -56,15 +62,15 @@
* - Endpoints MUST be allocated in ascending order to ensure that bank corruption does not occur. Ensure that your user application
* allocated endpoints in ascending order - or if your application uses the USB device mode class drivers, ensure that each instance's
* endpoint indexes are not overlapped with other interface's endpoints.
- * - The signature for the CALLBACK_USB_GetDescriptor() callback has changed, the "void** const DescriptorAddress" parameter is
- * now "const void** const DescriptorAddress". Existing applications should update their callback signatures to match this, and
- * eliminate any casting of descriptor pointers to a non-const pointer.
+ * - The signature for the \ref CALLBACK_USB_GetDescriptor() callback has changed, the \c void** \c const \c DescriptorAddress parameter is
+ * now \c const \c void** \c const \c DescriptorAddress. Existing applications should update their callback signatures to match this, and
+ * eliminate any casting of descriptor pointers to a non \c const pointer.
* - The names of the class specific descriptor type defines in the USB Class drivers have changed - refer to the driver documentation
* for each class driver for the new class specific descriptor type names.
- * - The ENDPOINT_DOUBLEBANK_SUPPORTED() macro is has been renamed \ref ENDPOINT_BANKS_SUPPORTED() and now returns the total number of
+ * - The \c ENDPOINT_DOUBLEBANK_SUPPORTED() macro is has been renamed \ref ENDPOINT_BANKS_SUPPORTED() and now returns the total number of
* banks supported by the given endpoint. Existing code should switch to the new naming scheme, and test that the return value of the
* macro is equal to or greater than 2 to regain the previous functionality.
- * - The EVENT_USB_Device_UnhandledControlRequest() event is now named \ref EVENT_USB_Device_ControlRequest() and fires before (not after)
+ * - The \c EVENT_USB_Device_UnhandledControlRequest() event is now named \ref EVENT_USB_Device_ControlRequest() and fires before (not after)
* the internal library event handlers. Existing code should rename the event handlers in the user application to match the new event
* name, and should ensure that the new execution order does not affect the application's operation.
*
@@ -72,11 +78,11 @@
* - Pipes MUST be allocated in ascending order to ensure that bank corruption does not occur. Ensure that your user application
* allocated pipes in ascending order - or if your application uses the USB host mode class drivers, ensure that each instance's
* pipe indexes are not overlapped with other interface's pipes.
- * - The PRNT_Host_SendData() function has been renamed to \ref PRNT_Host_SendString(). Existing applications should simply
+ * - The \c PRNT_Host_SendData() function has been renamed to \ref PRNT_Host_SendString(). Existing applications should simply
* replace all references to the obsolete function name with the new function name.
* - The names of the class specific descriptor type defines in the USB Class drivers have changed - refer to the driver documentation
* for each class driver for the new class specific descriptor type names.
- * - The Still Image Host class' function prefix has been changed from "SImage_" to "SI_", to remain consistent with the rest of the
+ * - The Still Image Host class' function prefix has been changed from \c SImage_ to \c SI_, to remain consistent with the rest of the
* driver's enums, type defines and constants.
*
* \section Sec_Migration100807 Migrating from 100513 to 100807
@@ -87,19 +93,19 @@
* copy-paste the new functions from the board Dataflash stub driver.
*
* <b>USB Core</b>
- * - A new USB driver source file, Drivers/USB/LowLevel/Device.c now exists. This source file should be added to all project
+ * - A new USB driver source file, \c Drivers/USB/LowLevel/Device.c now exists. This source file should be added to all project
* makefiles using the USB driver of LUFA, or the makefile should be updated to use the new module source variables.
- * - The Drivers/USB/LowLevel/DevChapter9.c source file has moved to Drivers/USB/HighLevel/DeviceStandardReq.c - this should
+ * - The \c Drivers/USB/LowLevel/DevChapter9.c source file has moved to \c Drivers/USB/HighLevel/DeviceStandardReq.c - this should
* be updated in all project makefiles, or the makefile should be updated to use the new module source variables.
- * - The Drivers/USB/LowLevel/HostChapter9.h source file has moved to Drivers/USB/HighLevel/HostStandardReq.c - this should
+ * - The \c Drivers/USB/LowLevel/HostChapter9.h source file has moved to \c Drivers/USB/HighLevel/HostStandardReq.c - this should
* be updated in all project makefiles, or the makefile should be updated to use the new module source variables.
- * - The Drivers/USB/LowLevel/LowLevel.c source file has moved to Drivers/LowLevel/USBController.c - this should be updated
+ * - The \c Drivers/USB/LowLevel/LowLevel.c source file has moved to \c Drivers/LowLevel/USBController.c - this should be updated
* in all project makefiles, or the makefile should be updated to use the new module source variables.
*
* <b>Device Mode</b>
- * - The USB_Device_IsRemoteWakeupSent() macro has been removed, as the remote wakeup request is now fully handled by the
- * enhanced \ref USB_Device_SendRemoteWakeup() function. Existing code may now discard any checks to USB_Device_IsRemoteWakeupSent().
- * - The USB_Device_IsUSBSuspended() macro has been removed, as it is obsolete. Existing code should compare \ref USB_DeviceState
+ * - The \c USB_Device_IsRemoteWakeupSent() macro has been removed, as the remote wakeup request is now fully handled by the
+ * enhanced \ref USB_Device_SendRemoteWakeup() function. Existing code may now discard any checks to \c USB_Device_IsRemoteWakeupSent().
+ * - The \c USB_Device_IsUSBSuspended() macro has been removed, as it is obsolete. Existing code should compare \ref USB_DeviceState
* to see if it the device is in the \ref DEVICE_STATE_Suspended state instead.
* - The \ref CDC_Device_ReceiveByte() function has changed, and now returns a signed 16-bit integer, with -1 indicating no data was
* received. This allows for more efficient coding, as a call to \ref CDC_Device_BytesReceived() is no longer needed if the exact
@@ -119,25 +125,25 @@
* device must respond or the function will abort.
*
* <b>Device Mode</b>
- * - The \ref USB_Init() function no longer calls sei() to enable global interrupts, as the user application may need
+ * - The \ref USB_Init() function no longer calls \c sei() to enable global interrupts, as the user application may need
* to perform other initialization before it is ready to handle global interrupts. The user application is now responsible
* for enabling global interrupts before or shortly after calling \ref USB_Init() to ensure that the enumeration process
* functions correctly.
- * - The USBInterrupt.c USB driver source file has been relocated from LUFA/Drivers/USB/HighLevel/ to LUFA/Drivers/USB/LowLevel.
+ * - The \c USBInterrupt.c USB driver source file has been relocated from \c LUFA/Drivers/USB/HighLevel/ to \c LUFA/Drivers/USB/LowLevel.
* Projects must update their makefile SRC values accordingly.
- * - The HID Device Class driver's function signature for the CALLBACK_HID_Device_ProcessHIDReport() function has been changed, to
- * allow for a new ReportType parameter. This new parameter must be added in all user applications using the Device mode HID Class
+ * - The HID Device Class driver's function signature for the \ref CALLBACK_HID_Device_ProcessHIDReport() function has been changed, to
+ * allow for a new \c ReportType parameter. This new parameter must be added in all user applications using the Device mode HID Class
* Driver, but may be ignored unless Host-to-Device FEATURE HID reports are used.
*
* <b>Host Mode</b>
- * - The \ref USB_Init() function no longer calls sei() to enable global interrupts, as the user application may need
+ * - The \ref USB_Init() function no longer calls \c sei() to enable global interrupts, as the user application may need
* to perform other initialization before it is ready to handle global interrupts. The user application is now responsible
* for enabling global interrupts before or shortly after calling \ref USB_Init() to ensure that the enumeration process
* functions correctly.
- * - The USBInterrupt.c USB driver source file has been relocated from LUFA/Drivers/USB/HighLevel/ to LUFA/Drivers/USB/LowLevel.
- * Projects must update their makefile SRC values accordingly.
- * - The HID Host Class driver's function signature for the HID_Host_SendReportByID() function has been changed, to allow for a new
- * ReportType parameter. Existing calls to this function should substitute REPORT_ITEM_TYPE_Out as this parameter's value.
+ * - The \c USBInterrupt.c USB driver source file has been relocated from \c LUFA/Drivers/USB/HighLevel/ to \c LUFA/Drivers/USB/LowLevel.
+ * Projects must update their makefile \c SRC values accordingly.
+ * - The HID Host Class driver's function signature for the \ref HID_Host_SendReportByID() function has been changed, to allow for a new
+ * ReportType parameter. Existing calls to this function should substitute \c REPORT_ITEM_TYPE_Out as this parameter's value.
*
* \section Sec_Migration100219 Migrating from 091223 to 100219
*
@@ -152,9 +158,9 @@
* packed into a single USB packet. This means that the sending of MIDI events will now be delayed until the MIDI send
* pipe bank is full. To override this new behaviour and revert to the previous behaviour, the user application may manually
* flush the queued event(s) to the device by calling \ref MIDI_Host_Flush().
- * - The Pipe_IsEndpointBound() function now takes the endpoint's direction into account, by checking if the MSB of the endpoint's address
+ * - The \ref Pipe_IsEndpointBound() function now takes the endpoint's direction into account, by checking if the MSB of the endpoint's address
* is set to denote IN endpoints. If the previous functionality where the direction is to be discounted is required, mask the endpoint
- * address against the \ref PIPE_EPNUM_MASK token before calling Pipe_IsEndpointBound().
+ * address against the \ref PIPE_EPNUM_MASK token before calling \ref Pipe_IsEndpointBound().
*
* <b>Device Mode</b>
* - The MIDI Device Class driver send and receive routines now operate on packed events, where multiple MIDI events may be
@@ -165,52 +171,52 @@
* \section Sec_Migration091223 Migrating from 091122 to 091223
*
* <b>Host Mode</b>
- * - The Still Image Host Class driver SI_Host_USBTask() and SI_Host_ConfigurePipes() functions were misnamed, and are
- * now named SImage_Host_USBTask() and SImage_Host_ConfigurePipes() respectively.
- * - The HOST_SENDCONTROL_DeviceDisconnect enum value has been renamed to \ref HOST_SENDCONTROL_DeviceDisconnected to be in
+ * - The Still Image Host Class driver \ref SI_Host_USBTask() and \ref SI_Host_ConfigurePipes() functions were misnamed, and are
+ * now named \c SImage_Host_USBTask() and \c SImage_Host_ConfigurePipes() respectively.
+ * - The \c HOST_SENDCONTROL_DeviceDisconnect enum value has been renamed to \ref HOST_SENDCONTROL_DeviceDisconnected to be in
* line with the rest of the library error codes.
* - The HID Parser item usages no longer contain separate minimum and maximum values, as this was a violation of the HID
* specification. Instead, the values are distributed evenly across each item as its usage value, to ensure that all items
* can be distinguished from one-another.
*
* <b>Device Mode</b>
- * - The CALLBACK_HID_Device_CreateHIDReport() HID Device Class driver callback now has a new ReportType parameter to
+ * - The \ref CALLBACK_HID_Device_CreateHIDReport() HID Device Class driver callback now has a new \c ReportType parameter to
* indicate the report type to generate. Existing applications may simply add and ignore this additional parameter.
*
* \section Sec_Migration091122 Migrating from 090924 to 091122
*
* <b>Host Mode</b>
- * - The HID_PARSE_UsageStackOverflow HID parser error constant is now named \ref HID_PARSE_UsageListOverflow
- * - The \ref CALLBACK_HIDParser_FilterHIDReportItem() HID Parser callback now passes a complete HID_ReportItem_t to the
+ * - The \c HID_PARSE_UsageStackOverflow HID parser error constant is now named \ref HID_PARSE_UsageListOverflow
+ * - The \ref CALLBACK_HIDParser_FilterHIDReportItem() HID Parser callback now passes a complete \ref HID_ReportItem_t to the
* user application, instead of just its attributes.
- * - The USB_GetDeviceConfigDescriptor() function was incorrectly named and is now called \ref USB_Host_GetDeviceConfigDescriptor().
+ * - The \c USB_GetDeviceConfigDescriptor() function was incorrectly named and is now called \ref USB_Host_GetDeviceConfigDescriptor().
*
* \section Sec_Migration090924 Migrating from 090810 to 090924
*
* <b>Non-USB Library Components</b>
- * - The ADC_Off() function has been renamed to \ref ADC_ShutDown() to be consistent with the rest of the library.
+ * - The \c ADC_Off() function has been renamed to \ref ADC_ShutDown() to be consistent with the rest of the library.
* - The \ref SPI_Init() routine's parameters have changed, so that the clock polarity and data sampling modes can be set. See
* the \ref SPI_Init() function documentation for more details
* - The \ref Dataflash_Init() routine no longer initializes the SPI bus - the SPI bus should be initialized manually via a
- * call to SPI_Init() before using the Dataflash driver
+ * call to \ref SPI_Init() before using the Dataflash driver
*
* <b>Host Mode</b>
- * - The USB_GetDeviceConfigDescriptor() function's parameters and behaviour has changed; the user is required to
+ * - The \c USB_GetDeviceConfigDescriptor() function's parameters and behaviour has changed; the user is required to
* preallocate the largest allowable buffer, and pass the size of the buffer to the function. This allows for a single
* call to the function to retrieve, size check and validate the Configuration Descriptor rather than having the user
* application perform these intermediary steps.
* - The HID report parser now requires a mandatory callback in the user code, to filter only the items the application
* is interested in into the processed HID report item structure to save RAM. See \ref CALLBACK_HIDParser_FilterHIDReportItem().
- * - The HID report parser now always parses FEATURE and always ignores constant-data items - the HID_ENABLE_FEATURE_PROCESSING
- * and HID_INCLUDE_CONSTANT_DATA_ITEMS compile time tokens now have no effect.
- * - The USE_NONSTANDARD_DESCRIPTOR_NAMES compile time token has been removed - there are now separate USB_Descriptor_*
- * and USB_StdDescriptor_* structures for both the LUFA and standardized element naming conventions so that both may be used in
- * the one project. For existing projects using the standardized names, change all code to use the USB_StdDescriptor_* variants.
+ * - The HID report parser now always parses FEATURE and always ignores constant-data items - the \c HID_ENABLE_FEATURE_PROCESSING
+ * and \c HID_INCLUDE_CONSTANT_DATA_ITEMS compile time tokens now have no effect.
+ * - The \c USE_NONSTANDARD_DESCRIPTOR_NAMES compile time token has been removed - there are now separate \c USB_Descriptor_*
+ * and \c USB_StdDescriptor_* structures for both the LUFA and standardized element naming conventions so that both may be used in
+ * the one project. For existing projects using the standardized names, change all code to use the \c USB_StdDescriptor_* variants.
*
* <b>Device Mode</b>
- * - The USE_NONSTANDARD_DESCRIPTOR_NAMES compile time token has been removed - there are now separate USB_Descriptor_*
- * and USB_StdDescriptor_* structures for both the LUFA and standardized element naming conventions so that both may be used in
- * the one project. For existing projects using the standardized names, change all code to use the USB_StdDescriptor_* variants.
+ * - The \c USE_NONSTANDARD_DESCRIPTOR_NAMES compile time token has been removed - there are now separate \c USB_Descriptor_*
+ * and \c USB_StdDescriptor_* structures for both the LUFA and standardized element naming conventions so that both may be used in
+ * the one project. For existing projects using the standardized names, change all code to use the \c USB_StdDescriptor_* variants.
*
* \section Sec_Migration090810 Migrating from 090605 to 090810
*
@@ -219,11 +225,10 @@
* User applications using the scheduler should switch to regular loops instead. The scheduler code will be removed in a future
* release.
* - The "Dynamic Memory Block Allocator" has been removed, as it was unused in (and unrelated to) the LUFA library and never
- * used in user applications. The library is available from the author's website for those wishing to still use it in their
- * applications.
+ * used in user applications.
*
* <b>Non-USB Library Components</b>
- * - The ATTR_NOINLINE function attribute macro has been renamed to ATTR_NO_INLINE to be in line with the rest of the function attribute
+ * - The \c ATTR_NOINLINE function attribute macro has been renamed to \ref ATTR_NO_INLINE to be in line with the rest of the function attribute
* macro names.
*
* <b>Library Demos</b>
@@ -232,178 +237,167 @@
* possible so that fixes to the class drivers propagate to all applications which use them automatically with each new LUFA release.
*
* <b>Host Mode</b>
- * - The HIDParser.c module has moved from LUFA/Drivers/USB/Class/ to LUFA/Drivers/USB/Class/Host/.
- * - The USB_GetDeviceConfigDescriptor() function now requires the desired configuration index within the device as its first
+ * - The \c HIDParser.c module has moved from \c LUFA/Drivers/USB/Class/ to \c LUFA/Drivers/USB/Class/Host/.
+ * - The \c USB_GetDeviceConfigDescriptor() function now requires the desired configuration index within the device as its first
* parameter, to add support for multi-configuration devices. Existing code should use a configuration index of 1 to indicate the
* first configuration descriptor within the device.
* - The non-standard "Ready" host state has been removed. Existing \ref HOST_STATE_Configured code should be moved to the end of
* the existing \ref HOST_STATE_Addressed state, and the existing HOST_STATE_Ready state code should be moved to the \ref HOST_STATE_Configured
* state.
- * - The USB_IsConnected global has been removed, as it is too vague for general use. Test \ref USB_HostState explicitly to ensure the host is
+ * - The \c USB_IsConnected global has been removed, as it is too vague for general use. Test \ref USB_HostState explicitly to ensure the host is
* in the desired state instead.
* - The USB event names have been changed and their firing conditions changed to properly separate out Host mode events from Device mode
* events. See the \ref Group_Events page for details on the new event names and firing conditions.
*
* <b>Device Mode</b>
* - The \ref CALLBACK_USB_GetDescriptor() function now takes an extra parameter to specify the descriptor's memory space so that
- * descriptors in mixed memory spaces can be used. The previous functionality can be returned by defining the USE_FLASH_DESCRIPTORS
+ * descriptors in mixed memory spaces can be used. The previous functionality can be returned by defining the \c USE_FLASH_DESCRIPTORS
* token in the project makefile to fix all descriptors into FLASH space and remove the extra function parameter.
- * - The USB_IsSuspended global has been removed - test \ref USB_DeviceState against \ref DEVICE_STATE_Suspended instead.
- * - The USB_IsConnected global has been removed, as it is too vague for general use. Test \ref USB_DeviceState explicitly to ensure the device
+ * - The \c USB_IsSuspended global has been removed - test \ref USB_DeviceState against \ref DEVICE_STATE_Suspended instead.
+ * - The \c USB_IsConnected global has been removed, as it is too vague for general use. Test \ref USB_DeviceState explicitly to ensure the device
* is in the desired state instead.
- * - The VBUS events have been removed, as they are already exposed to the user via the USB_Connect and USB_Disconnect events.
+ * - The VBUS events have been removed, as they are already exposed to the user via the \c USB_Connect and \c USB_Disconnect events.
* - The USB event names have been changed and their firing conditions changed to properly separate out Host mode events from Device mode
- * events. See the \ref Group_Events page for details on the new event names and firing conditions. *
+ * events. See the \ref Group_Events page for details on the new event names and firing conditions.
*
* \section Sec_Migration090605 Migrating from 090510 to 090605
*
* <b>Device Mode</b>
* - Support for non-control data endpoint interrupts has been dropped due to many issues in the implementation. All existing
* projects using interrupts on non-control endpoints should switch to polling. For control interrupts, the library can
- * manage the control endpoint via interrupts automatically by compiling with the INTERRUPT_CONTROL_ENDPOINT token defined.
- * - The DESCRIPTOR_ADDRESS() macro has been removed. User applications should use normal casts to obtain a descriptor's memory
+ * manage the control endpoint via interrupts automatically by compiling with the \c INTERRUPT_CONTROL_ENDPOINT token defined.
+ * - The \c DESCRIPTOR_ADDRESS() macro has been removed. User applications should use normal casts to obtain a descriptor's memory
* address.
* - The library events system has been rewritten, so that all macros have been removed to allow for clearer user code. See
* \ref Group_Events for new API details.
- * - The STREAM_CALLBACK() macro has been removed. User applications should replace all instances of the macro with regular
- * function signatures of a function accepting no arguments and returning a uint8_t value.
- * - The Event_DeviceError() event no longer exists, as its sole caller (unlinked USB_GetDescriptor() function) now produces a
- * compilation error rather than a runtime error. The StdDescriptors.c file no longer exists as a result, and should be removed
+ * - The \c STREAM_CALLBACK() macro has been removed. User applications should replace all instances of the macro with regular
+ * function signatures of a function accepting no arguments and returning a \c uint8_t value.
+ * - The \c Event_DeviceError() event no longer exists, as its sole caller (unlinked \c USB_GetDescriptor() function) now produces a
+ * compilation error rather than a runtime error. The \c StdDescriptors.c file no longer exists as a result, and should be removed
* from project makefiles.
- * - The USB_GetDescriptor() function has been renamed to CALLBACK_USB_GetDescriptor() to be in line with the new CALLBACK_ function
- * prefixes for functions which *must* be implemented in the user application.
+ * - The \c USB_GetDescriptor() function has been renamed to \ref CALLBACK_USB_GetDescriptor() to be in line with the new \c CALLBACK_
+ * function prefixes for functions which <i>must</i> be implemented in the user application.
*
* <b>Host Mode</b>
* - Support for non-control data pipe interrupts has been dropped due to many issues in the implementation. All existing
* projects using interrupts on non-control pipes should switch to polling.
* - The library events system has been rewritten, so that all macros have been removed to allow for clearer user code. See
* \ref Group_Events for new API details.
- * - The STREAM_CALLBACK() macro has been removed. User applications should replace all instances of the macro with regular
- * function signatures of a function accepting no arguments and returning a uint8_t value.
- * - The DESCRIPTOR_COMPARATOR() macro has been removed. User applications should replace all instances of the macro with
- * regular function signatures of a function accepting a void pointer to the descriptor to test, and returning a uint8_t value.
+ * - The \c STREAM_CALLBACK() macro has been removed. User applications should replace all instances of the macro with regular
+ * function signatures of a function accepting no arguments and returning a \c uint8_t value.
+ * - The \c DESCRIPTOR_COMPARATOR() macro has been removed. User applications should replace all instances of the macro with
+ * regular function signatures of a function accepting a void pointer to the descriptor to test, and returning a \c uint8_t value.
*
* \section Sec_Migration090510 Migrating from 090401 to 090510
*
* <b>All</b>
- * - The ButtLoadTag.h header has been removed, as it was never used for its intended purpose. Projects should either remove all
- * BUTTLOADTAG elements, or download and extract ButtLoadTag.h header from the ButtLoad project.
- * - The Drivers/AT90USBXXX directory has been renamed to Drivers/Peripheral.
- * - The Serial_Stream driver has been renamed to SerialStream to remain consistent with the rest of the library naming scheme.
- * - The HWB driver has changed to the Buttons driver. See the board Buttons driver documentation for the new API.
+ * - The \c ButtLoadTag.h header has been removed, as it was never used for its intended purpose. Projects should either remove all
+ * \c BUTTLOADTAG() elements, or download and extract \c ButtLoadTag.h header from the ButtLoad project.
+ * - The \c Drivers/AT90USBXXX/ directory has been renamed to \c Drivers/Peripheral/.
+ * - The \c Serial_Stream driver has been renamed to \c SerialStream to remain consistent with the rest of the library naming scheme.
+ * - The HWB driver has changed to the \c Buttons driver. See the board Buttons driver documentation for the new API.
*
* <b>Dual Role Mode</b>
- * - The USB_PowerOnFail even has been renamed to USB_InitFailure.
- * - The functions in OTG.h have been renamed to remain more consistent with the library API. See the functions in OTG.h for more
+ * - The \c USB_PowerOnFail even has been renamed to \c USB_InitFailure.
+ * - The functions in \c OTG.h have been renamed to remain more consistent with the library API. See the functions in \c OTG.h for more
* details.
*
- * <b>Library Demos</b>
- * - Most demos, bootloaders and applications have had significant changes from previous versions. Applications built off of any
- * library demos should update to the latest versions.
- *
* <b>Device Mode</b>
- * - The Endpoint_ClearCurrentBank() macro has been removed, and is now replaced with the Endpoint_ClearIN(), Endpoint_ClearOUT()
- * macros. See Endpoint.h documentation for more details on the new endpoint management macros.
- * - The Endpoint_ReadWriteAllowed() macro has been renamed to Endpoint_IsReadWriteAllowed() to be more consistent with the rest of
+ * - The \c Endpoint_ClearCurrentBank() macro has been removed, and is now replaced with the \ref Endpoint_ClearIN(), \ref Endpoint_ClearOUT()
+ * macros. See \c Endpoint.h documentation for more details on the new endpoint management macros.
+ * - The \c Endpoint_ReadWriteAllowed() macro has been renamed to \ref Endpoint_IsReadWriteAllowed() to be more consistent with the rest of
* the API naming scheme.
- * - The Endpoint_IsSetupINReady() and Endpoint_IsSetupOutReceived() macros have been renamed to Endpoint_IsINReady() and
- * Endpoint_IsOUTReceived() respectively.
- * - The Endpoint_IsSetupReceived() macro has been renamed to Endpoint_IsSETUPReceived().
- * - The Endpoint_ClearSetupReceived() macro has been renamed to Endpoint_ClearSETUP().
- * - All endpoint read/write/discard aliases which did not have an explicitly endianness specifier (such as Endpoint_Read_Word()) have
- * been removed for clarity. Existing projects should use the "_LE" suffix on such calls to use the explicit Little Endian versions.
- * - The USB_UnhandledControlPacket event no longer has any parameters. User code should no longer attempt to read in the remainder of
+ * - The \c Endpoint_IsSetupINReady() and \c Endpoint_IsSetupOUTReceived() macros have been renamed to \ref Endpoint_IsINReady() and
+ * \ref Endpoint_IsOUTReceived() respectively.
+ * - The \c Endpoint_IsSetupReceived() macro has been renamed to \ref Endpoint_IsSETUPReceived().
+ * - The \c Endpoint_ClearSetupReceived() macro has been renamed to \ref Endpoint_ClearSETUP().
+ * - All endpoint read/write/discard aliases which did not have an explicitly endianness specifier (such as \c Endpoint_Read_Word()) have
+ * been removed for clarity. Existing projects should use the \c _LE suffix on such calls to use the explicit Little Endian versions.
+ * - The \c USB_UnhandledControlPacket event no longer has any parameters. User code should no longer attempt to read in the remainder of
* the Control Request header as all Control Request header data is now preloaded by the library and made available in the
* USB_ControlRequest structure.
- * - The FEATURELESS_CONTROL_ONLY_DEVICE token has been renamed to CONTROL_ONLY_DEVICE.
- * - The STATIC_ENDPOINT_CONFIGURATION is no longer applicable as the library will apply this optimization when appropriate automatically.
- * - The values of the Endpoint_Stream_RW_ErrorCodes_t and Endpoint_ControlStream_RW_ErrorCodes_t enums have had the "ERROR_" portion
+ * - The \c FEATURELESS_CONTROL_ONLY_DEVICE token has been renamed to \c CONTROL_ONLY_DEVICE.
+ * - The \c STATIC_ENDPOINT_CONFIGURATION is no longer applicable as the library will apply this optimization when appropriate automatically.
+ * - The values of the \ref Endpoint_Stream_RW_ErrorCodes_t and \ref Endpoint_ControlStream_RW_ErrorCodes_t enums have had the \c ERROR_ portion
* of their names removed.
*
* <b>Host Mode</b>
- * - The USB_Host_SendControlRequest() function no longer automatically selects the Control pipe (pipe 0) to allow it to be used on
+ * - The \ref USB_Host_SendControlRequest() function no longer automatically selects the Control pipe (pipe 0) to allow it to be used on
* other control type pipes. Care should be taken to ensure that the Control pipe is always selected before the function is called
* in existing projects where the Control pipe is to be operated on.
* - The USB Host management task now saves and restores the currently selected pipe before and after the task runs. Projects no longer
* need to manage this manually when calling the USB management task.
- * - The Pipe_ClearCurrentBank() macro has been removed, and is now replaced with the Pipe_ClearIN(), Pipe_ClearOUT() macros. See
+ * - The \c Pipe_ClearCurrentBank() macro has been removed, and is now replaced with the Pipe_ClearIN(), Pipe_ClearOUT() macros. See
* Pipe.h documentation for more details on the new pipe management macros.
- * - The Pipe_ReadWriteAllowed() macro has been renamed to Pipe_IsReadWriteAllowed() to be more consistent with the rest of the API
+ * - The \c Pipe_ReadWriteAllowed() macro has been renamed to \ref Pipe_IsReadWriteAllowed() to be more consistent with the rest of the API
* naming scheme.
- * - The Pipe_IsSetupINReceived() and Pipe_IsOutReady() macros have been renamed to Pipe_IsINReceived() and Pipe_IsOUTReady()
+ * - The \c Pipe_IsSetupINReceived() and \c Pipe_IsOutReady() macros have been renamed to \ref Pipe_IsINReceived() and \ref Pipe_IsOUTReady()
* respectively.
- * - The new Pipe_ClearSETUP() macro should be used to send SETUP transactions, rather than the previous Pipe_ClearSetupOUT() macro.
- * - The Pipe_IsSetupSent() macro has been renamed to Pipe_IsSETUPSent().
- * - The Pipe_ClearSetupSent() macro is no longer applicable and should be removed.
- * - All pipe read/write/discard aliases which did not have an explicitly endianness specifier (such as Pipe_Read_Word()) have
- * been removed for clarity. Existing projects should use the "_LE" suffix on such calls to use the explicit Little Endian versions.
- * - The Host_IsResetBusDone() macro has been renamed to Host_IsBusResetComplete().
- * - The Pipe_Ignore_Word() and Pipe_Ignore_DWord() functions have been renamed to Pipe_Discard_Word() and Pipe_Discard_DWord() to remain
- * consistent with the rest of the pipe API.
- * - It is no longer needed to manually include the headers from LUFA/Drivers/USB/Class, as they are now included along with the rest
- * of the USB headers when LUFA/Drivers/USB/USB.h is included.
- * - Functions in the ConfigDescriptor.h header file no longer have "Host_" as part of their names.
- * - The ProcessHIDReport() has been renamed to USB_ProcessHIDReport(), GetReportItemInfo() has been renamed to USB_GetHIDReportItemInfo()
- * and SetReportItemInfo() has been renamed to USB_GetHIDReportItemInfo().
- * - The values of the DSearch_Return_ErrorCodes_t and DSearch_Comp_Return_ErrorCodes_t enums have had their respective "Descriptor_Search"
- * and "Descriptor_Search_Comp" prefixes changed to all caps.
- * - The USB_HostRequest global has been renamed to USB_ControlRequest, and is used in Device mode also. The USB_Host_Request_Header_t
- * structure type has been renamed to USB_Request_Header_t.
- * - The values of the Pipe_Stream_RW_ErrorCodes_t enum have had the "ERROR_" portion of their names removed.
+ * - The new \ref Pipe_ClearSETUP() macro should be used to send SETUP transactions, rather than the previous \c Pipe_ClearSetupOUT() macro.
+ * - The \c Pipe_IsSetupSent() macro has been renamed to \ref Pipe_IsSETUPSent().
+ * - The \c Pipe_ClearSetupSent() macro is no longer applicable and should be removed.
+ * - All pipe read/write/discard aliases which did not have an explicitly endianness specifier (such as \c Pipe_Read_Word()) have
+ * been removed for clarity. Existing projects should use the \c _LE suffix on such calls to use the explicit Little Endian versions.
+ * - The \c Host_IsResetBusDone() macro has been renamed to \c Host_IsBusResetComplete().
+ * - The \c Pipe_Ignore_Word() and \c Pipe_Ignore_DWord() functions have been renamed to \ref Pipe_Discard_Word() and \ref Pipe_Discard_DWord()
+ * to remain consistent with the rest of the pipe API.
+ * - It is no longer needed to manually include the headers from \c LUFA/Drivers/USB/Class, as they are now included along with the rest
+ * of the USB headers when \c LUFA/Drivers/USB/USB.h is included.
+ * - Functions in the \c ConfigDescriptor.h header file no longer have \c Host_ as part of their names.
+ * - The \c ProcessHIDReport() has been renamed to \ref USB_ProcessHIDReport(), \c GetReportItemInfo() has been renamed to \ref USB_GetHIDReportItemInfo()
+ * and \c SetReportItemInfo() has been renamed to \ref USB_GetHIDReportItemInfo().
+ * - The values of the \ref DSearch_Return_ErrorCodes_t and \ref DSearch_Comp_Return_ErrorCodes_t enums have had their respective \c Descriptor_Search
+ * and \c Descriptor_Search_Comp prefixes changed to all caps.
+ * - The \c USB_HostRequest global has been renamed to \ref USB_ControlRequest, and is used in Device mode also. The \c USB_Host_Request_Header_t
+ * structure type has been renamed to \ref USB_Request_Header_t.
+ * - The values of the \ref Pipe_Stream_RW_ErrorCodes_t enum have had the \c ERROR_ portion of their names removed.
*
* \section Sec_Migration090401 Migrating from 090209 to 090401
*
* <b>All</b>
- * - LUFA projects must now give the raw input clock frequency (before any prescaling) as a compile time constant "F_CLOCK",
+ * - LUFA projects must now give the raw input clock frequency (before any prescaling) as a compile time constant \c F_CLOCK,
* defined in the project makefile and passed to the compiler via the -D switch.
* - The makefile EEPROM programming targets for FLIP and dfu-programmer no longer program in the FLASH data in addition to the
* EEPROM data into the device. If both are to be programmed, both the EEPROM and FLASH programming targets must be called.
- * - As the avr-libc macro has been corrected in recent avr-libc distributions, the SetSystemClockPrescaler() macro has been removed.
- * Include <avr/power.h> and call clock_prescale_set(clock_div_1); instead on recent avr-libc distributions.
+ * - As the avr-libc macro has been corrected in recent avr-libc distributions, the \c SetSystemClockPrescaler() macro has been removed.
+ * Include \c <avr/power.h> and call \c clock_prescale_set(clock_div_1); instead on recent avr-libc distributions.
*
* <b>Library Demos</b>
* - The USBtoSerial demo now discards all data when not connected to a host, rather than buffering it for later transmission.
- * - Most demos, bootloaders and applications have had their control request handling code corrected, to properly send the status
- * stage in all handled requests. If you are using code based off one of the library demos, bootloaders or applications, you should
- * update to the latest revisions.
*
* <b>Non-USB Library Components</b>
- * - The ATTR_ALWAYSINLINE function attribute macro has been renamed to ATTR_ALWAYS_INLINE.
- * - Custom board Dataflash drivers now require the implementation of Dataflash_SelectChipFromPage() and Dataflash_SendAddressBytes().
+ * - The \c ATTR_ALWAYSINLINE function attribute macro has been renamed to \ref ATTR_ALWAYS_INLINE.
+ * - Custom board Dataflash drivers now require the implementation of \ref Dataflash_SelectChipFromPage() and \ref Dataflash_SendAddressBytes().
*
* <b>Device Mode</b>
- * - The NO_CLEARSET_FEATURE_REQUEST compile time token has been renamed to FEATURELESS_CONTROL_ONLY_DEVICE, and its function expanded
+ * - The \c NO_CLEARSET_FEATURE_REQUEST compile time token has been renamed to \c FEATURELESS_CONTROL_ONLY_DEVICE, and its function expanded
* to also remove parts of the Get Status chapter 9 request to further reduce code usage. On all applications currently using the
- * NO_CLEARSET_FEATURE_REQUEST compile time token, it can be replaced with the FEATURELESS_CONTROL_ONLY_DEVICE token with no further
+ * \c NO_CLEARSET_FEATURE_REQUEST compile time token, it can be replaced with the \c FEATURELESS_CONTROL_ONLY_DEVICE token with no further
* modifications required.
*
* \section Sec_Migration090209 Migrating from 081217 to 090209
*
* <b>Device Mode</b>
- * - The ENDPOINT_MAX_ENDPOINTS constant has been renamed to the more appropriate name of ENDPOINT_TOTAL_ENDPOINTS.
- * - The USB_STREAM_TIMEOUT_MS stream timeout default period has been extended to 100ms. This can be overridden in the user
+ * - The \c ENDPOINT_MAX_ENDPOINTS constant has been renamed to the more appropriate name of \c ENDPOINT_TOTAL_ENDPOINTS.
+ * - The \c USB_STREAM_TIMEOUT_MS stream timeout default period has been extended to 100ms. This can be overridden in the user
* makefile if desired to restore the previous 50ms timeout.
*
* <b>Host Mode</b>
- * - The PIPE_MAX_ENDPOINTS constant has been renamed to the more appropriate name of PIPE_TOTAL_ENDPOINTS.
- * - The USB_STREAM_TIMEOUT_MS stream timeout default period has been extended to 100ms. This can be overridden in the user
+ * - The \c PIPE_MAX_ENDPOINTS constant has been renamed to the more appropriate name of \c PIPE_TOTAL_ENDPOINTS.
+ * - The \c USB_STREAM_TIMEOUT_MS stream timeout default period has been extended to 100ms. This can be overridden in the user
* makefile if desired to restore the previous 50ms timeout.
- * - The USB_DeviceEnumerationFailed event now contains a second "SubErrorCode" parameter, giving the error code of the function
+ * - The \c USB_DeviceEnumerationFailed event now contains a second \c SubErrorCode parameter, giving the error code of the function
* which failed.
- * - The HID_PARSE_Sucessful enum member constant has been corrected to HID_PARSE_Successful.
+ * - The \c HID_PARSE_Sucessful enum member constant name has been corrected to \ref HID_PARSE_Successful.
*
* <b>Non-USB Library Components</b>
- * - The previous SPI_SendByte() functionality is now located in SPI_TransferByte(). SPI_SendByte() now discards the return byte
- * for speed, to compliment the new SPI_ReceiveByte() function. If two-way SPI transfers are required, calls to SPI_SendByte()
- * should be changed to SPI_TransferByte().
+ * - The previous \c SPI_SendByte() functionality is now located in \ref SPI_TransferByte(). \ref SPI_SendByte() now discards the return byte
+ * for speed, to compliment the new \ref SPI_ReceiveByte() function. If bidirectional SPI transfers are required, calls to \ref SPI_SendByte()
+ * should be changed to \ref SPI_TransferByte().
* - The serial driver now sets the Tx line as an output explicitly, and enables the pull-up of the Rx line.
- * - The Serial_Init() and SerialStream_Init() functions now take a second DoubleSpeed parameter, which indicates if the USART
- * should be initialized in double speed mode - useful in some circumstances for attaining baud rates not usually possible at
- * the given AVR clock speed.
- *
- * <b>Library Demos</b>
- * - Most library demos have been enhanced and/or had errors corrected. All users of all demos should upgrade their codebase to
- * the latest demo versions.
+ * - The \ref Serial_Init() and \c SerialStream_Init() functions now take a second \c DoubleSpeed parameter, which indicates if the USART
+ * should be initialized in double speed mode - useful in some circumstances for attaining baud rates not usually possible at the given AVR
+ * clock speed.
*
* \section Sec_Migration171208 Migrating from V1.5.3 to 081217
*