diff options
Diffstat (limited to 'LUFA/ManPages/SoftwareBootloaderJump.txt')
| -rw-r--r-- | LUFA/ManPages/SoftwareBootloaderJump.txt | 5 |
1 files changed, 4 insertions, 1 deletions
diff --git a/LUFA/ManPages/SoftwareBootloaderJump.txt b/LUFA/ManPages/SoftwareBootloaderJump.txt index d0b41e1b6..049f49c8f 100644 --- a/LUFA/ManPages/SoftwareBootloaderJump.txt +++ b/LUFA/ManPages/SoftwareBootloaderJump.txt @@ -12,12 +12,15 @@ * hardware). This might be required because the device does not have any physical user input, or simply * just to streamline the device upgrade process on the host PC. * - * The following C code snippet may be used to enter the bootloader upon request by the user application. + * The following C code snippets may be used to enter the bootloader upon request by the user application. * By using the watchdog to physically reset the controller, it is ensured that all system hardware is * completely reset to their defaults before the bootloader is run. This is important; since bootloaders * are written to occupy a very limited space, they usually make assumptions about the register states based * on the default values after a hard-reset of the chip. * + * \section Sec_SoftareBootAVR8 AVR8 Architecture + * The following software bootloader jump code is written for the AVR8 architecture. + * * \code * #include <avr/wdt.h> * #include <avr/io.h> |