diff options
Diffstat (limited to 'LUFA')
| -rw-r--r-- | LUFA/Common/Common.h | 10 | ||||
| -rw-r--r-- | LUFA/Drivers/Board/LEDs.h | 2 | ||||
| -rw-r--r-- | LUFA/Drivers/Peripheral/AVRU4U6U7/TWI.h | 2 | ||||
| -rw-r--r-- | LUFA/Drivers/Peripheral/SPI.h | 2 | ||||
| -rw-r--r-- | LUFA/Drivers/USB/Class/Device/CDC.h | 12 | ||||
| -rw-r--r-- | LUFA/Drivers/USB/Class/Device/HID.h | 22 | ||||
| -rw-r--r-- | LUFA/Drivers/USB/Class/Device/MIDI.h | 4 | ||||
| -rw-r--r-- | LUFA/Drivers/USB/Class/Host/CDC.h | 16 | ||||
| -rw-r--r-- | LUFA/Drivers/USB/Class/Host/HID.h | 20 | ||||
| -rw-r--r-- | LUFA/Drivers/USB/Class/Host/HIDParser.h | 12 | ||||
| -rw-r--r-- | LUFA/Drivers/USB/Class/Host/MIDI.h | 10 | ||||
| -rw-r--r-- | LUFA/Drivers/USB/Class/Host/MassStorage.h | 46 | ||||
| -rw-r--r-- | LUFA/Drivers/USB/Class/Host/Printer.h | 16 | ||||
| -rw-r--r-- | LUFA/Drivers/USB/Class/Host/RNDIS.h | 26 | ||||
| -rw-r--r-- | LUFA/Drivers/USB/Class/Host/StillImage.h | 26 | ||||
| -rw-r--r-- | LUFA/Drivers/USB/HighLevel/ConfigDescriptor.h | 32 | ||||
| -rw-r--r-- | LUFA/Drivers/USB/HighLevel/Events.h | 4 | ||||
| -rw-r--r-- | LUFA/Drivers/USB/LowLevel/Device.h | 24 | ||||
| -rw-r--r-- | LUFA/Drivers/USB/LowLevel/Endpoint.h | 8 | ||||
| -rw-r--r-- | LUFA/Drivers/USB/LowLevel/Host.h | 6 | ||||
| -rw-r--r-- | LUFA/Drivers/USB/LowLevel/Pipe.h | 26 |
21 files changed, 163 insertions, 163 deletions
diff --git a/LUFA/Common/Common.h b/LUFA/Common/Common.h index febc216bc..76307d7e9 100644 --- a/LUFA/Common/Common.h +++ b/LUFA/Common/Common.h @@ -118,7 +118,7 @@ * * \ingroup Group_BitManip * - * \param[in] Byte Byte of data whose bits are to be reversed + * \param[in] Byte Byte of data whose bits are to be reversed */ static inline uint8_t BitReverse(uint8_t Byte) ATTR_WARN_UNUSED_RESULT ATTR_CONST; static inline uint8_t BitReverse(uint8_t Byte) @@ -134,7 +134,7 @@ * * \ingroup Group_BitManip * - * \param[in] Word Word of data whose bytes are to be swapped + * \param[in] Word Word of data whose bytes are to be swapped */ static inline uint16_t SwapEndian_16(uint16_t Word) ATTR_WARN_UNUSED_RESULT ATTR_CONST; static inline uint16_t SwapEndian_16(uint16_t Word) @@ -146,7 +146,7 @@ * * \ingroup Group_BitManip * - * \param[in] DWord Double word of data whose bytes are to be swapped + * \param[in] DWord Double word of data whose bytes are to be swapped */ static inline uint32_t SwapEndian_32(uint32_t DWord) ATTR_WARN_UNUSED_RESULT ATTR_CONST; static inline uint32_t SwapEndian_32(uint32_t DWord) @@ -161,8 +161,8 @@ * * \ingroup Group_BitManip * - * \param[in,out] Data Pointer to a number containing an even number of bytes to be reversed - * \param[in] Bytes Length of the data in bytes + * \param[in,out] Data Pointer to a number containing an even number of bytes to be reversed + * \param[in] Bytes Length of the data in bytes */ static inline void SwapEndian_n(void* Data, uint8_t Bytes); static inline void SwapEndian_n(void* Data, uint8_t Bytes) diff --git a/LUFA/Drivers/Board/LEDs.h b/LUFA/Drivers/Board/LEDs.h index 5e6a4cd36..f34041e29 100644 --- a/LUFA/Drivers/Board/LEDs.h +++ b/LUFA/Drivers/Board/LEDs.h @@ -167,7 +167,7 @@ /** Toggles all LEDs in the LED mask, leaving all others in their current states. * - * \param[in] LEDMask Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file) + * \param[in] LEDMask Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file) */ static inline void LEDs_ToggleLEDs(const uint8_t LEDMask); diff --git a/LUFA/Drivers/Peripheral/AVRU4U6U7/TWI.h b/LUFA/Drivers/Peripheral/AVRU4U6U7/TWI.h index f6a251710..eb9e6aa1d 100644 --- a/LUFA/Drivers/Peripheral/AVRU4U6U7/TWI.h +++ b/LUFA/Drivers/Peripheral/AVRU4U6U7/TWI.h @@ -110,7 +110,7 @@ /** Receives a byte from the currently addressed device on the TWI bus. * - * \param[in] Byte Location where the read byte is to be stored + * \param[in] Byte Location where the read byte is to be stored * \param[in] LastByte Indicates if the byte should be ACKed if false, NAKed if true * * \return Boolean true if the byte reception sucessfully completed, false otherwise diff --git a/LUFA/Drivers/Peripheral/SPI.h b/LUFA/Drivers/Peripheral/SPI.h index 9e6475351..195818a24 100644 --- a/LUFA/Drivers/Peripheral/SPI.h +++ b/LUFA/Drivers/Peripheral/SPI.h @@ -153,7 +153,7 @@ /** Sends a byte through the SPI interface, blocking until the transfer is complete. The response * byte sent to from the attached SPI device is ignored. * - * \param[in] Byte Byte to send through the SPI interface + * \param[in] Byte Byte to send through the SPI interface */ static inline void SPI_SendByte(const uint8_t Byte) ATTR_ALWAYS_INLINE; static inline void SPI_SendByte(const uint8_t Byte) diff --git a/LUFA/Drivers/USB/Class/Device/CDC.h b/LUFA/Drivers/USB/Class/Device/CDC.h index f0351f5d9..8a0cb6abd 100644 --- a/LUFA/Drivers/USB/Class/Device/CDC.h +++ b/LUFA/Drivers/USB/Class/Device/CDC.h @@ -206,9 +206,9 @@ * \note This function must only be called when the Device state machine is in the DEVICE_STATE_Configured state or * the call will fail. * - * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state - * \param[in] Data Pointer to the string to send to the host - * \param[in] Length Size in bytes of the string to send to the host + * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state + * \param[in] Data Pointer to the string to send to the host + * \param[in] Length Size in bytes of the string to send to the host * * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum */ @@ -224,7 +224,7 @@ * the call will fail. * * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state - * \param[in] Data Byte of data to send to the host + * \param[in] Data Byte of data to send to the host * * \return A value from the \ref Endpoint_WaitUntilReady_ErrorCodes_t enum */ @@ -290,7 +290,7 @@ * to the given CDC interface. * * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state - * \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed + * \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed */ void CDC_Device_CreateStream(USB_ClassInfo_CDC_Device_t* CDCInterfaceInfo, FILE* Stream); @@ -298,7 +298,7 @@ * the transfer. While blocking, the USB and CDC service tasks are called repeatedly to maintain USB communications. * * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state - * \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed + * \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed */ void CDC_Device_CreateBlockingStream(USB_ClassInfo_CDC_Device_t* CDCInterfaceInfo, FILE* Stream); diff --git a/LUFA/Drivers/USB/Class/Device/HID.h b/LUFA/Drivers/USB/Class/Device/HID.h index 9e42843d4..4088e870e 100644 --- a/LUFA/Drivers/USB/Class/Device/HID.h +++ b/LUFA/Drivers/USB/Class/Device/HID.h @@ -153,12 +153,12 @@ * user is responsible for the creation of the next HID input report to be sent to the host. * * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class configuration and state - * \param[in,out] ReportID If preset to a non-zero value, this is the report ID being requested by the host. If zero, this should - * be set to the report ID of the generated HID input report (if any). If multiple reports are not sent via the - * given HID interface, this parameter should be ignored. - * \param[in] ReportType Type of HID report to generate, either \ref REPORT_ITEM_TYPE_In or \ref REPORT_ITEM_TYPE_Feature - * \param[out] ReportData Pointer to a buffer where the generated HID report should be stored - * \param[out] ReportSize Number of bytes in the generated input report, or zero if no report is to be sent + * \param[in,out] ReportID If preset to a non-zero value, this is the report ID being requested by the host. If zero, + * this should be set to the report ID of the generated HID input report (if any). If multiple + * reports are not sent via the given HID interface, this parameter should be ignored. + * \param[in] ReportType Type of HID report to generate, either \ref REPORT_ITEM_TYPE_In or \ref REPORT_ITEM_TYPE_Feature + * \param[out] ReportData Pointer to a buffer where the generated HID report should be stored + * \param[out] ReportSize Number of bytes in the generated input report, or zero if no report is to be sent * * \return Boolean true to force the sending of the report even if it is identical to the previous report and still within * the idle period (useful for devices which report relative movement), false otherwise @@ -172,11 +172,11 @@ * the user is responsible for the processing of the received HID output report from the host. * * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class configuration and state - * \param[in] ReportID Report ID of the received output report. If multiple reports are not received via the given HID - * interface, this parameter should be ignored. - * \param[in] ReportType Type of received HID report, either \ref REPORT_ITEM_TYPE_Out or \ref REPORT_ITEM_TYPE_Feature - * \param[in] ReportData Pointer to a buffer where the received HID report is stored. - * \param[in] ReportSize Size in bytes of the received report from the host. + * \param[in] ReportID Report ID of the received output report. If multiple reports are not received via the given HID + * interface, this parameter should be ignored. + * \param[in] ReportType Type of received HID report, either \ref REPORT_ITEM_TYPE_Out or \ref REPORT_ITEM_TYPE_Feature + * \param[in] ReportData Pointer to a buffer where the received HID report is stored. + * \param[in] ReportSize Size in bytes of the received report from the host. */ void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo, const uint8_t ReportID, const uint8_t ReportType, const void* ReportData, const uint16_t ReportSize) ATTR_NON_NULL_PTR_ARG(1) diff --git a/LUFA/Drivers/USB/Class/Device/MIDI.h b/LUFA/Drivers/USB/Class/Device/MIDI.h index c4b871528..9529f17c2 100644 --- a/LUFA/Drivers/USB/Class/Device/MIDI.h +++ b/LUFA/Drivers/USB/Class/Device/MIDI.h @@ -120,7 +120,7 @@ * the call will fail. * * \param[in,out] MIDIInterfaceInfo Pointer to a structure containing a MIDI Class configuration and state - * \param[in] Event Pointer to a populated USB_MIDI_EventPacket_t structure containing the MIDI event to send + * \param[in] Event Pointer to a populated USB_MIDI_EventPacket_t structure containing the MIDI event to send * * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum */ @@ -144,7 +144,7 @@ * the call will fail. * * \param[in,out] MIDIInterfaceInfo Pointer to a structure containing a MIDI Class configuration and state - * \param[out] Event Pointer to a USB_MIDI_EventPacket_t structure where the received MIDI event is to be placed + * \param[out] Event Pointer to a USB_MIDI_EventPacket_t structure where the received MIDI event is to be placed * * \return Boolean true if a MIDI event packet was received, false otherwise */ diff --git a/LUFA/Drivers/USB/Class/Host/CDC.h b/LUFA/Drivers/USB/Class/Host/CDC.h index 2ccc88054..c3ca64525 100644 --- a/LUFA/Drivers/USB/Class/Host/CDC.h +++ b/LUFA/Drivers/USB/Class/Host/CDC.h @@ -161,9 +161,9 @@ * This should be called once after the stack has enumerated the attached device, while the host state machine is in * the Addressed state. * - * \param[in,out] CDCInterfaceInfo Pointer to a structure containing an CDC Class host configuration and state - * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor - * \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor + * \param[in,out] CDCInterfaceInfo Pointer to a structure containing an CDC Class host configuration and state + * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor + * \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor * * \return A value from the \ref CDCHost_EnumerationFailure_ErrorCodes_t enum */ @@ -209,8 +209,8 @@ * call will fail. * * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state - * \param[in] Data Pointer to the string to send to the device - * \param[in] Length Size in bytes of the string to send to the device + * \param[in] Data Pointer to the string to send to the device + * \param[in] Length Size in bytes of the string to send to the device * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum */ @@ -226,7 +226,7 @@ * call will fail. * * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state - * \param[in] Data Byte of data to send to the device + * \param[in] Data Byte of data to send to the device * * \return A value from the \ref Pipe_WaitUntilReady_ErrorCodes_t enum */ @@ -275,7 +275,7 @@ * to the given CDC interface. * * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state - * \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed + * \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed */ void CDC_Host_CreateStream(USB_ClassInfo_CDC_Host_t* CDCInterfaceInfo, FILE* Stream); @@ -283,7 +283,7 @@ * the transfer. While blocking, the USB and CDC service tasks are called repeatedly to maintain USB communications. * * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state - * \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed + * \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed */ void CDC_Host_CreateBlockingStream(USB_ClassInfo_CDC_Host_t* CDCInterfaceInfo, FILE* Stream); diff --git a/LUFA/Drivers/USB/Class/Host/HID.h b/LUFA/Drivers/USB/Class/Host/HID.h index 7aabd7c65..88c514b0f 100644 --- a/LUFA/Drivers/USB/Class/Host/HID.h +++ b/LUFA/Drivers/USB/Class/Host/HID.h @@ -155,9 +155,9 @@ * \note Once the device pipes are configured, the HID device's reporting protocol <b>must</b> be set via a call * to either the \ref HID_Host_SetBootProtocol() or \ref HID_Host_SetReportProtocol() function. * - * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state - * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor - * \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor + * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state + * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor + * \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor * * \return A value from the \ref HIDHost_EnumerationFailure_ErrorCodes_t enum */ @@ -175,7 +175,7 @@ * can generate. * * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state - * \param[in] Buffer Buffer to store the received report into + * \param[in] Buffer Buffer to store the received report into * * \return An error code from the \ref Pipe_Stream_RW_ErrorCodes_t enum */ @@ -192,8 +192,8 @@ * \note When the HID_HOST_BOOT_PROTOCOL_ONLY compile time token is defined, this method is unavailable. * * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state - * \param[in] ReportID Report ID of the received report if ControlRequest is false, set by the to the Report ID to fetch - * \param[in] Buffer Buffer to store the received report into + * \param[in] ReportID Report ID of the received report if ControlRequest is false, set by the to the Report ID to fetch + * \param[in] Buffer Buffer to store the received report into * * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum */ @@ -212,10 +212,10 @@ * from the parameter list of this function. * * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state - * \param[in] ReportID Report ID of the report to send to the device, or 0 if the device does not use report IDs - * \param[in] ReportType Type of report to issue to the device, either \ref REPORT_ITEM_TYPE_Out or \ref REPORT_ITEM_TYPE_Feature - * \param[in] Buffer Buffer containing the report to send to the attached device - * \param[in] ReportSize Report size in bytes to send to the attached device + * \param[in] ReportID Report ID of the report to send to the device, or 0 if the device does not use report IDs + * \param[in] ReportType Type of report to issue to the device, either \ref REPORT_ITEM_TYPE_Out or \ref REPORT_ITEM_TYPE_Feature + * \param[in] Buffer Buffer containing the report to send to the attached device + * \param[in] ReportSize Report size in bytes to send to the attached device * * \return An error code from the \ref USB_Host_SendControlErrorCodes_t enum if the DeviceUsesOUTPipe flag is set in * the interface's state structure, a value from the \ref Pipe_Stream_RW_ErrorCodes_t enum otherwise diff --git a/LUFA/Drivers/USB/Class/Host/HIDParser.h b/LUFA/Drivers/USB/Class/Host/HIDParser.h index 6630750e6..e99ddd8a3 100644 --- a/LUFA/Drivers/USB/Class/Host/HIDParser.h +++ b/LUFA/Drivers/USB/Class/Host/HIDParser.h @@ -134,7 +134,7 @@ * leftwards until the data's sign bit is in the correct position. * * \param[in] reportitem HID Report Item whose retrieved value is to be aligned - * \param[in] type Data type to align the HID report item's value to + * \param[in] type Data type to align the HID report item's value to * * \return Left-aligned data of the given report item's pre-retrived value for the given datatype */ @@ -272,8 +272,8 @@ /** Function to process a given HID report returned from an attached device, and store it into a given * \ref HID_ReportInfo_t structure. * - * \param[in] ReportData Buffer containing the device's HID report table - * \param[in] ReportSize Size in bytes of the HID report table + * \param[in] ReportData Buffer containing the device's HID report table + * \param[in] ReportSize Size in bytes of the HID report table * \param[out] ParserData Pointer to a \ref HID_ReportInfo_t instance for the parser output * * \return A value in the \ref HID_Parse_ErrorCodes_t enum @@ -287,7 +287,7 @@ * When called, this copies the report item's Value element to it's PreviousValue element for easy * checking to see if an item's value has changed before processing a report. * - * \param[in] ReportData Buffer containing an IN or FEATURE report from an attached device + * \param[in] ReportData Buffer containing an IN or FEATURE report from an attached device * \param[in,out] ReportItem Pointer to the report item of interest in a \ref HID_ReportInfo_t ReportItem array * * \returns Boolean true if the item to retrieve was located in the given report, false otherwise @@ -306,7 +306,7 @@ * If the device has multiple HID reports, the first byte in the report is set to the report ID of the given item. * * \param[out] ReportData Buffer holding the current OUT or FEATURE report data - * \param[in] ReportItem Pointer to the report item of interest in a \ref HID_ReportInfo_t ReportItem array + * \param[in] ReportItem Pointer to the report item of interest in a \ref HID_ReportInfo_t ReportItem array */ void USB_SetHIDReportItemInfo(uint8_t* ReportData, HID_ReportItem_t* const ReportItem) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2); @@ -314,7 +314,7 @@ /** Retrieves the size of a given HID report in bytes from it's Report ID. * * \param[in] ParserData Pointer to a \ref HID_ReportInfo_t instance containing the parser output - * \param[in] ReportID Report ID of the report whose size is to be retrieved + * \param[in] ReportID Report ID of the report whose size is to be retrieved * \param[in] ReportType Type of the report whose size is to be determined, a valued from the * \ref HID_ReportItemTypes_t enum * diff --git a/LUFA/Drivers/USB/Class/Host/MIDI.h b/LUFA/Drivers/USB/Class/Host/MIDI.h index 2ff6c9be0..5f38c7340 100644 --- a/LUFA/Drivers/USB/Class/Host/MIDI.h +++ b/LUFA/Drivers/USB/Class/Host/MIDI.h @@ -119,9 +119,9 @@ * This should be called once after the stack has enumerated the attached device, while the host state machine is in * the Addressed state. * - * \param[in,out] MIDIInterfaceInfo Pointer to a structure containing an MIDI Class host configuration and state - * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor - * \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor + * \param[in,out] MIDIInterfaceInfo Pointer to a structure containing an MIDI Class host configuration and state + * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor + * \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor * * \return A value from the \ref MIDIHost_EnumerationFailure_ErrorCodes_t enum */ @@ -134,7 +134,7 @@ * call will fail. * * \param[in,out] MIDIInterfaceInfo Pointer to a structure containing a MIDI Class configuration and state - * \param[in] Event Pointer to a populated USB_MIDI_EventPacket_t structure containing the MIDI event to send + * \param[in] Event Pointer to a populated USB_MIDI_EventPacket_t structure containing the MIDI event to send * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum */ @@ -158,7 +158,7 @@ * call will fail. * * \param[in,out] MIDIInterfaceInfo Pointer to a structure containing a MIDI Class configuration and state - * \param[out] Event Pointer to a USB_MIDI_EventPacket_t structure where the received MIDI event is to be placed + * \param[out] Event Pointer to a USB_MIDI_EventPacket_t structure where the received MIDI event is to be placed * * \return Boolean true if a MIDI event packet was received, false otherwise */ diff --git a/LUFA/Drivers/USB/Class/Host/MassStorage.h b/LUFA/Drivers/USB/Class/Host/MassStorage.h index e4f7415c4..1759a983a 100644 --- a/LUFA/Drivers/USB/Class/Host/MassStorage.h +++ b/LUFA/Drivers/USB/Class/Host/MassStorage.h @@ -137,9 +137,9 @@ * is found within the device. This should be called once after the stack has enumerated the attached device, while * the host state machine is in the Addressed state. * - * \param[in,out] MSInterfaceInfo Pointer to a structure containing an MS Class host configuration and state - * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor - * \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor + * \param[in,out] MSInterfaceInfo Pointer to a structure containing an MS Class host configuration and state + * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor + * \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor * * \return A value from the \ref MSHost_EnumerationFailure_ErrorCodes_t enum */ @@ -164,7 +164,7 @@ * if the device STALLs the request. * * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state - * \param[out] MaxLUNIndex Pointer to a location where the highest LUN index value should be stored + * \param[out] MaxLUNIndex Pointer to a location where the highest LUN index value should be stored * * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum */ @@ -178,8 +178,8 @@ * call will fail. * * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state - * \param[in] LUNIndex LUN index within the device the command is being issued to - * \param[out] InquiryData Location where the read inquiry data should be stored + * \param[in] LUNIndex LUN index within the device the command is being issued to + * \param[out] InquiryData Location where the read inquiry data should be stored * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or MS_ERROR_LOGICAL_CMD_FAILED */ @@ -190,7 +190,7 @@ /** Sends a TEST UNIT READY command to the device, to determine if it is ready to accept other SCSI commands. * * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state - * \param[in] LUNIndex LUN index within the device the command is being issued to + * \param[in] LUNIndex LUN index within the device the command is being issued to * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or MS_ERROR_LOGICAL_CMD_FAILED if not ready */ @@ -203,8 +203,8 @@ * call will fail. * * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state - * \param[in] LUNIndex LUN index within the device the command is being issued to - * \param[out] DeviceCapacity Pointer to the location where the capacity information should be stored + * \param[in] LUNIndex LUN index within the device the command is being issued to + * \param[out] DeviceCapacity Pointer to the location where the capacity information should be stored * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or MS_ERROR_LOGICAL_CMD_FAILED if not ready */ @@ -219,8 +219,8 @@ * call will fail. * * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state - * \param[in] LUNIndex LUN index within the device the command is being issued to - * \param[out] SenseData Pointer to the location where the sense information should be stored + * \param[in] LUNIndex LUN index within the device the command is being issued to + * \param[out] SenseData Pointer to the location where the sense information should be stored * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or MS_ERROR_LOGICAL_CMD_FAILED if not ready */ @@ -235,8 +235,8 @@ * call will fail. * * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state - * \param[in] LUNIndex LUN index within the device the command is being issued to - * \param[in] PreventRemoval Boolean true if the device should be locked from removal, false otherwise + * \param[in] LUNIndex LUN index within the device the command is being issued to + * \param[in] PreventRemoval Boolean true if the device should be locked from removal, false otherwise * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or MS_ERROR_LOGICAL_CMD_FAILED if not ready */ @@ -249,11 +249,11 @@ * call will fail. * * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state - * \param[in] LUNIndex LUN index within the device the command is being issued to - * \param[in] BlockAddress Starting block address within the device to read from - * \param[in] Blocks Total number of blocks to read - * \param[in] BlockSize Size in bytes of each block within the device - * \param[out] BlockBuffer Pointer to where the read data from the device should be stored + * \param[in] LUNIndex LUN index within the device the command is being issued to + * \param[in] BlockAddress Starting block address within the device to read from + * \param[in] Blocks Total number of blocks to read + * \param[in] BlockSize Size in bytes of each block within the device + * \param[out] BlockBuffer Pointer to where the read data from the device should be stored * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or MS_ERROR_LOGICAL_CMD_FAILED if not ready */ @@ -267,11 +267,11 @@ * call will fail. * * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state - * \param[in] LUNIndex LUN index within the device the command is being issued to - * \param[in] BlockAddress Starting block address within the device to write to - * \param[in] Blocks Total number of blocks to read - * \param[in] BlockSize Size in bytes of each block within the device - * \param[in] BlockBuffer Pointer to where the data to write should be sourced from + * \param[in] LUNIndex LUN index within the device the command is being issued to + * \param[in] BlockAddress Starting block address within the device to write to + * \param[in] Blocks Total number of blocks to read + * \param[in] BlockSize Size in bytes of each block within the device + * \param[in] BlockBuffer Pointer to where the data to write should be sourced from * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or MS_ERROR_LOGICAL_CMD_FAILED if not ready */ diff --git a/LUFA/Drivers/USB/Class/Host/Printer.h b/LUFA/Drivers/USB/Class/Host/Printer.h index aa650ba63..c8950e197 100644 --- a/LUFA/Drivers/USB/Class/Host/Printer.h +++ b/LUFA/Drivers/USB/Class/Host/Printer.h @@ -120,9 +120,9 @@ * the device. This should be called once after the stack has enumerated the attached device, while the host state * machine is in the Addressed state. * - * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state - * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor - * \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor + * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state + * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor + * \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor * * \return A value from the \ref PRNTHost_EnumerationFailure_ErrorCodes_t enum */ @@ -142,7 +142,7 @@ * PRNT_PORTSTATUS_* macros to determine the printer port's status. * * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state - * \param[out] PortStatus Location where the retrieved port status should be stored + * \param[out] PortStatus Location where the retrieved port status should be stored * * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum */ @@ -165,8 +165,8 @@ * call will fail. * * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state - * \param[in] PrinterCommands Pointer to a buffer containing the raw command stream to send to the printer - * \param[in] CommandSize Size in bytes of the command stream to be sent + * \param[in] PrinterCommands Pointer to a buffer containing the raw command stream to send to the printer + * \param[in] CommandSize Size in bytes of the command stream to be sent * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum */ @@ -181,8 +181,8 @@ * This string, when supported, contains the model, manufacturer and acceptable printer languages for the attached device. * * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state - * \param[out] DeviceIDString Pointer to a buffer where the Device ID string should be stored, in ASCII format - * \param[in] BufferSize Size in bytes of the buffer allocated for the Device ID string + * \param[out] DeviceIDString Pointer to a buffer where the Device ID string should be stored, in ASCII format + * \param[in] BufferSize Size in bytes of the buffer allocated for the Device ID string * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum */ diff --git a/LUFA/Drivers/USB/Class/Host/RNDIS.h b/LUFA/Drivers/USB/Class/Host/RNDIS.h index feddc72b3..c7dba7165 100644 --- a/LUFA/Drivers/USB/Class/Host/RNDIS.h +++ b/LUFA/Drivers/USB/Class/Host/RNDIS.h @@ -138,9 +138,9 @@ * This should be called once after the stack has enumerated the attached device, while the host state machine is in * the Addressed state. * - * \param[in,out] RNDISInterfaceInfo Pointer to a structure containing an RNDIS Class host configuration and state - * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor - * \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor + * \param[in,out] RNDISInterfaceInfo Pointer to a structure containing an RNDIS Class host configuration and state + * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor + * \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor * * \return A value from the \ref RNDISHost_EnumerationFailure_ErrorCodes_t enum */ @@ -170,9 +170,9 @@ /** Sets a given RNDIS property of an attached RNDIS device. * * \param[in,out] RNDISInterfaceInfo Pointer to a structure containing an RNDIS Class host configuration and state - * \param[in] Oid OID number of the parameter to set - * \param[in] Buffer Pointer to where the property data is to be sourced from - * \param[in] Length Length in bytes of the property data to sent to the device + * \param[in] Oid OID number of the parameter to set + * \param[in] Buffer Pointer to where the property data is to be sourced from + * \param[in] Length Length in bytes of the property data to sent to the device * * \return A value from the USB_Host_SendControlErrorCodes_t enum or RNDIS_COMMAND_FAILED if the device returned a * logical command failure @@ -183,9 +183,9 @@ /** Gets a given RNDIS property of an attached RNDIS device. * * \param[in,out] RNDISInterfaceInfo Pointer to a structure containing an RNDIS Class host configuration and state - * \param[in] Oid OID number of the parameter to get - * \param[in] Buffer Pointer to where the property data is to be written to - * \param[in] MaxLength Length in bytes of the destination buffer size + * \param[in] Oid OID number of the parameter to get + * \param[in] Buffer Pointer to where the property data is to be written to + * \param[in] MaxLength Length in bytes of the destination buffer size * * \return A value from the USB_Host_SendControlErrorCodes_t enum or RNDIS_COMMAND_FAILED if the device returned a * logical command failure @@ -212,8 +212,8 @@ * call will fail. * * \param[in,out] RNDISInterfaceInfo Pointer to a structure containing an RNDIS Class host configuration and state - * \param[out] Buffer Pointer to a buffer where the packer data is to be written to - * \param[out] PacketLength Pointer to where the length in bytes of the read packet is to be stored + * \param[out] Buffer Pointer to a buffer where the packer data is to be written to + * \param[out] PacketLength Pointer to where the length in bytes of the read packet is to be stored * * \return A value from the Pipe_Stream_RW_ErrorCodes_t enum */ @@ -226,8 +226,8 @@ * call will fail. * * \param[in,out] RNDISInterfaceInfo Pointer to a structure containing an RNDIS Class host configuration and state - * \param[in] Buffer Pointer to a buffer where the packer data is to be read from - * \param[in] PacketLength Length in bytes of the packet to send + * \param[in] Buffer Pointer to a buffer where the packer data is to be read from + * \param[in] PacketLength Length in bytes of the packet to send * * \return A value from the Pipe_Stream_RW_ErrorCodes_t enum */ diff --git a/LUFA/Drivers/USB/Class/Host/StillImage.h b/LUFA/Drivers/USB/Class/Host/StillImage.h index 02a3f3ad5..e8ebec52e 100644 --- a/LUFA/Drivers/USB/Class/Host/StillImage.h +++ b/LUFA/Drivers/USB/Class/Host/StillImage.h @@ -134,9 +134,9 @@ * found within the device. This should be called once after the stack has enumerated the attached device, while * the host state machine is in the Addressed state. * - * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state - * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor - * \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor + * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state + * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor + * \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor * * \return A value from the \ref SIHost_EnumerationFailure_ErrorCodes_t enum */ @@ -176,7 +176,7 @@ * call will fail. * * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state - * \param[in] PIMAHeader Pointer to a PIMA container structure that is to be sent + * \param[in] PIMAHeader Pointer to a PIMA container structure that is to be sent * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum */ @@ -189,7 +189,7 @@ * call will fail. * * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state - * \param[out] PIMAHeader Pointer to a PIMA container structure where the received block is to be stored + * \param[out] PIMAHeader Pointer to a PIMA container structure where the received block is to be stored * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum */ @@ -201,9 +201,9 @@ * call will fail. * * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state - * \param[in] Operation PIMA operation code to issue to the device - * \param[in] TotalParams Total number of 32-bit parameters to send to the device in the issued command block - * \param[in] Params Pointer to an array of 32-bit values containing the parameters to send in the command block + * \param[in] Operation PIMA operation code to issue to the device + * \param[in] TotalParams Total number of 32-bit parameters to send to the device in the issued command block + * \param[in] Params Pointer to an array of 32-bit values containing the parameters to send in the command block * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum, or \ref SI_ERROR_LOGICAL_CMD_FAILED if the device * returned a logical command failure @@ -241,7 +241,7 @@ * call will fail. * * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state - * \param[out] PIMAHeader Pointer to a PIMA container structure where the event should be stored + * \param[out] PIMAHeader Pointer to a PIMA container structure where the event should be stored * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum, or \ref SI_ERROR_LOGICAL_CMD_FAILED if the device * returned a logical command failure @@ -257,8 +257,8 @@ * call will fail. * * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state - * \param[in] Buffer Pointer to a buffer where the data to send has been stored - * \param[in] Bytes Length in bytes of the data in the buffer to send to the attached device + * \param[in] Buffer Pointer to a buffer where the data to send has been stored + * \param[in] Bytes Length in bytes of the data in the buffer to send to the attached device * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum */ @@ -272,8 +272,8 @@ * call will fail. * * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state - * \param[out] Buffer Pointer to a buffer where the received data is to be stored - * \param[in] Bytes Length in bytes of the data to read + * \param[out] Buffer Pointer to a buffer where the received data is to be stored + * \param[in] Bytes Length in bytes of the data to read * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum */ diff --git a/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.h b/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.h index 099553335..1bf4aca50 100644 --- a/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.h +++ b/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.h @@ -134,9 +134,9 @@ * * \note This function is available in USB Host mode only. * - * \param[in,out] BytesRem Pointer to an int storing the remaining bytes in the configuration descriptor - * \param[in,out] CurrConfigLoc Pointer to the current position in the configuration descriptor - * \param[in] ComparatorRoutine Name of the comparator search function to use on the configuration descriptor + * \param[in,out] BytesRem Pointer to an int storing the remaining bytes in the configuration descriptor + * \param[in,out] CurrConfigLoc Pointer to the current position in the configuration descriptor + * \param[in] ComparatorRoutine Name of the comparator search function to use on the configuration descriptor * * \return Value of one of the members of the \ref DSearch_Comp_Return_ErrorCodes_t enum * @@ -203,11 +203,11 @@ /** Retrieves the configuration descriptor data from an attached device via a standard request into a buffer, * including validity and size checking to prevent a buffer overflow. * - * \param[in] ConfigNumber Device configuration descriptor number to fetch from the device (usually set to 1 for - * single configuration devices) + * \param[in] ConfigNumber Device configuration descriptor number to fetch from the device (usually set to 1 for + * single configuration devices) * \param[in,out] ConfigSizePtr Pointer to a uint16_t for storing the retrieved configuration descriptor size - * \param[out] BufferPtr Pointer to the buffer for storing the configuration descriptor data. - * \param[out] BufferSize Size of the allocated buffer where the configuration descriptor is to be stored + * \param[out] BufferPtr Pointer to the buffer for storing the configuration descriptor data. + * \param[out] BufferSize Size of the allocated buffer where the configuration descriptor is to be stored * * \return A value from the \ref USB_Host_GetConfigDescriptor_ErrorCodes_t enum */ @@ -217,9 +217,9 @@ /** Skips to the next sub-descriptor inside the configuration descriptor of the specified type value. * The bytes remaining value is automatically decremented. * - * \param[in,out] BytesRem Pointer to the number of bytes remaining of the configuration descriptor + * \param[in,out] BytesRem Pointer to the number of bytes remaining of the configuration descriptor * \param[in,out] CurrConfigLoc Pointer to the current descriptor inside the configuration descriptor - * \param[in] Type Descriptor type value to search for + * \param[in] Type Descriptor type value to search for */ void USB_GetNextDescriptorOfType(uint16_t* const BytesRem, void** const CurrConfigLoc, @@ -231,10 +231,10 @@ * descriptor is reached first, the number of bytes remaining to process is set to zero and the * function exits. The bytes remaining value is automatically decremented. * - * \param[in,out] BytesRem Pointer to the number of bytes remaining of the configuration descriptor + * \param[in,out] BytesRem Pointer to the number of bytes remaining of the configuration descriptor * \param[in,out] CurrConfigLoc Pointer to the current descriptor inside the configuration descriptor - * \param[in] Type Descriptor type value to search for - * \param[in] BeforeType Descriptor type value which must not be reached before the given Type descriptor + * \param[in] Type Descriptor type value to search for + * \param[in] BeforeType Descriptor type value which must not be reached before the given Type descriptor */ void USB_GetNextDescriptorOfTypeBefore(uint16_t* const BytesRem, void** const CurrConfigLoc, @@ -246,10 +246,10 @@ * which must come after a descriptor of the second given type value. The bytes remaining value is * automatically decremented. * - * \param[in,out] BytesRem Pointer to the number of bytes remaining of the configuration descriptor + * \param[in,out] BytesRem Pointer to the number of bytes remaining of the configuration descriptor * \param[in,out] CurrConfigLoc Pointer to the current descriptor inside the configuration descriptor - * \param[in] Type Descriptor type value to search for - * \param[in] AfterType Descriptor type value which must be reached before the given Type descriptor + * \param[in] Type Descriptor type value to search for + * \param[in] AfterType Descriptor type value which must be reached before the given Type descriptor */ void USB_GetNextDescriptorOfTypeAfter(uint16_t* const BytesRem, void** const CurrConfigLoc, @@ -261,7 +261,7 @@ /** Skips over the current sub-descriptor inside the configuration descriptor, so that the pointer then points to the next sub-descriptor. The bytes remaining value is automatically decremented. * - * \param[in,out] BytesRem Pointer to the number of bytes remaining of the configuration descriptor + * \param[in,out] BytesRem Pointer to the number of bytes remaining of the configuration descriptor * \param[in,out] CurrConfigLoc Pointer to the current descriptor inside the configuration descriptor */ static inline void USB_GetNextDescriptor(uint16_t* const BytesRem, diff --git a/LUFA/Drivers/USB/HighLevel/Events.h b/LUFA/Drivers/USB/HighLevel/Events.h index edc7a8b36..e8984a419 100644 --- a/LUFA/Drivers/USB/HighLevel/Events.h +++ b/LUFA/Drivers/USB/HighLevel/Events.h @@ -154,8 +154,8 @@ /** Event for USB device enumeration failure. This event fires when a the USB interface is * in host mode, and an attached USB device has failed to enumerate completely. * - * \param[in] ErrorCode Error code indicating the failure reason, a value in - * \ref USB_Host_EnumerationErrorCodes_t + * \param[in] ErrorCode Error code indicating the failure reason, a value in + * \ref USB_Host_EnumerationErrorCodes_t * * \param[in] SubErrorCode Sub error code indicating the reason for failure - for example, if the * ErrorCode parameter indicates a control error, this will give the error diff --git a/LUFA/Drivers/USB/LowLevel/Device.h b/LUFA/Drivers/USB/LowLevel/Device.h index d8e7739b3..7f9d540bf 100644 --- a/LUFA/Drivers/USB/LowLevel/Device.h +++ b/LUFA/Drivers/USB/LowLevel/Device.h @@ -186,18 +186,18 @@ * index and language ID. This function MUST be overridden in the user application (added with full, identical * prototype and name so that the library can call it to retrieve descriptor data. * - * \param[in] wValue The type of the descriptor to retrieve in the upper byte, and the index in the - * lower byte (when more than one descriptor of the given type exists, such as the - * case of string descriptors). The type may be one of the standard types defined - * in the DescriptorTypes_t enum, or may be a class-specific descriptor type value. - * \param[in] wIndex The language ID of the string to return if the wValue type indicates DTYPE_String, - * otherwise zero for standard descriptors, or as defined in a class-specific - * standards. - * \param[out] DescriptorAddress Pointer to the descriptor in memory. This should be set by the routine to - * the address of the descriptor. - * \param[out] MemoryAddressSpace A value from the \ref USB_DescriptorMemorySpaces_t enum to indicate the memory - * space in which the descriptor is stored. This parameter does not exist when one - * of the USE_*_DESCRIPTORS compile time options is used. + * \param[in] wValue The type of the descriptor to retrieve in the upper byte, and the index in the + * lower byte (when more than one descriptor of the given type exists, such as the + * case of string descriptors). The type may be one of the standard types defined + * in the DescriptorTypes_t enum, or may be a class-specific descriptor type value. + * \param[in] wIndex The language ID of the string to return if the wValue type indicates DTYPE_String, + * otherwise zero for standard descriptors, or as defined in a class-specific + * standards. + * \param[out] DescriptorAddress Pointer to the descriptor in memory. This should be set by the routine to + * the address of the descriptor. + * \param[out] MemoryAddressSpace A value from the \ref USB_DescriptorMemorySpaces_t enum to indicate the memory + * space in which the descriptor is stored. This parameter does not exist when one + * of the USE_*_DESCRIPTORS compile time options is used. * * \note By default, the library expects all descriptors to be located in flash memory via the PROGMEM attribute. * If descriptors should be located in RAM or EEPROM instead (to speed up access in the case of RAM, or to diff --git a/LUFA/Drivers/USB/LowLevel/Endpoint.h b/LUFA/Drivers/USB/LowLevel/Endpoint.h index 68413b819..760a37787 100644 --- a/LUFA/Drivers/USB/LowLevel/Endpoint.h +++ b/LUFA/Drivers/USB/LowLevel/Endpoint.h @@ -1124,7 +1124,7 @@ * \ingroup Group_EndpointStreamRW * * \param[out] Buffer Pointer to the destination data buffer to write to. - * \param[in] Length Number of bytes to send via the currently selected endpoint. + * \param[in] Length Number of bytes to send via the currently selected endpoint. * * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. */ @@ -1144,7 +1144,7 @@ * \ingroup Group_EndpointStreamRW * * \param[out] Buffer Pointer to the destination data buffer to write to. - * \param[in] Length Number of bytes to send via the currently selected endpoint. + * \param[in] Length Number of bytes to send via the currently selected endpoint. * * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. */ @@ -1167,7 +1167,7 @@ * \ingroup Group_EndpointStreamRW * * \param[out] Buffer Pointer to the destination data buffer to write to. - * \param[in] Length Number of bytes to send via the currently selected endpoint. + * \param[in] Length Number of bytes to send via the currently selected endpoint. * * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. */ @@ -1187,7 +1187,7 @@ * \ingroup Group_EndpointStreamRW * * \param[out] Buffer Pointer to the destination data buffer to write to. - * \param[in] Length Number of bytes to send via the currently selected endpoint. + * \param[in] Length Number of bytes to send via the currently selected endpoint. * * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. */ diff --git a/LUFA/Drivers/USB/LowLevel/Host.h b/LUFA/Drivers/USB/LowLevel/Host.h index 1ef023908..fef6b43c2 100644 --- a/LUFA/Drivers/USB/LowLevel/Host.h +++ b/LUFA/Drivers/USB/LowLevel/Host.h @@ -222,9 +222,9 @@ * * \note After this routine returns, the control pipe will be selected. * - * \param[in] Index Index of the string index to retrieve - * \param[out] Buffer Pointer to the destination buffer where the retrieved string decriptor is - * to be stored + * \param[in] Index Index of the string index to retrieve + * \param[out] Buffer Pointer to the destination buffer where the retrieved string decriptor is + * to be stored * \param[in] BufferLength Maximum size of the string descriptor which can be stored into the buffer * * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum to indicate the result. diff --git a/LUFA/Drivers/USB/LowLevel/Pipe.h b/LUFA/Drivers/USB/LowLevel/Pipe.h index 02f882dc5..b4b40cacf 100644 --- a/LUFA/Drivers/USB/LowLevel/Pipe.h +++ b/LUFA/Drivers/USB/LowLevel/Pipe.h @@ -845,7 +845,7 @@ * * \ingroup Group_PipeStreamRW * - * \param[in] Length Number of bytes to send via the currently selected pipe. + * \param[in] Length Number of bytes to send via the currently selected pipe. * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. @@ -965,9 +965,9 @@ * * \ingroup Group_PipeStreamRW * - * \param[out] Buffer Pointer to the source data buffer to write to. - * \param[in] Length Number of bytes to read for the currently selected pipe to read from. - * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback + * \param[out] Buffer Pointer to the source data buffer to write to. + * \param[in] Length Number of bytes to read for the currently selected pipe to read from. + * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. */ @@ -977,9 +977,9 @@ * * \ingroup Group_PipeStreamRW * - * \param[out] Buffer Pointer to the source data buffer to write to. - * \param[in] Length Number of bytes to read for the currently selected pipe to read from. - * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback + * \param[out] Buffer Pointer to the source data buffer to write to. + * \param[in] Length Number of bytes to read for the currently selected pipe to read from. + * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. */ @@ -1000,9 +1000,9 @@ * * \ingroup Group_PipeStreamRW * - * \param[out] Buffer Pointer to the source data buffer to write to. - * \param[in] Length Number of bytes to read for the currently selected pipe to read from. - * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback + * \param[out] Buffer Pointer to the source data buffer to write to. + * \param[in] Length Number of bytes to read for the currently selected pipe to read from. + * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. */ @@ -1012,9 +1012,9 @@ * * \ingroup Group_PipeStreamRW * - * \param[out] Buffer Pointer to the source data buffer to write to. - * \param[in] Length Number of bytes to read for the currently selected pipe to read from. - * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback + * \param[out] Buffer Pointer to the source data buffer to write to. + * \param[in] Length Number of bytes to read for the currently selected pipe to read from. + * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback * * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. */ |