diff options
Diffstat (limited to 'Projects/AVRISP/Lib/V2ProtocolParams.c')
| -rw-r--r-- | Projects/AVRISP/Lib/V2ProtocolParams.c | 182 |
1 files changed, 0 insertions, 182 deletions
diff --git a/Projects/AVRISP/Lib/V2ProtocolParams.c b/Projects/AVRISP/Lib/V2ProtocolParams.c deleted file mode 100644 index 105633560..000000000 --- a/Projects/AVRISP/Lib/V2ProtocolParams.c +++ /dev/null @@ -1,182 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2009.
-
- dean [at] fourwalledcubicle [dot] com
- www.fourwalledcubicle.com
-*/
-
-/*
- Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, and distribute this software
- and its documentation for any purpose and without fee is hereby
- granted, provided that the above copyright notice appear in all
- copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * V2Protocol parameter handler, to process V2 Protocol device parameters.
- */
-
-#define INCLUDE_FROM_V2PROTOCOL_PARAMS_C
-#include "V2ProtocolParams.h"
-
-/* Non-Volatile Parameter Values for EEPROM storage */
-uint8_t EEMEM EEPROM_Rest_Polarity = 0x00;
-
-/* Volatile Parameter Values for RAM storage */
-static ParameterItem_t ParameterTable[] =
- {
- { .ParamID = PARAM_BUILD_NUMBER_LOW,
- .ParamPrivileges = PARAM_PRIV_READ,
- .ParamValue = (LUFA_VERSION_INTEGER >> 8) },
-
- { .ParamID = PARAM_BUILD_NUMBER_HIGH,
- .ParamPrivileges = PARAM_PRIV_READ,
- .ParamValue = (LUFA_VERSION_INTEGER & 0xFF), },
-
- { .ParamID = PARAM_HW_VER,
- .ParamPrivileges = PARAM_PRIV_READ,
- .ParamValue = 0x00 },
-
- { .ParamID = PARAM_SW_MAJOR,
- .ParamPrivileges = PARAM_PRIV_READ,
- .ParamValue = 0x01 },
-
- { .ParamID = PARAM_SW_MINOR,
- .ParamPrivileges = PARAM_PRIV_READ,
- .ParamValue = 0x0D },
-
- { .ParamID = PARAM_VTARGET,
- .ParamPrivileges = PARAM_PRIV_READ,
- .ParamValue = 0x32 },
-
- { .ParamID = PARAM_SCK_DURATION,
- .ParamPrivileges = PARAM_PRIV_READ | PARAM_PRIV_WRITE,
- .ParamValue = (TOTAL_ISP_PROGRAMMING_SPEEDS - 1) },
-
- { .ParamID = PARAM_RESET_POLARITY,
- .ParamPrivileges = PARAM_PRIV_WRITE,
- .ParamValue = 0x00 },
-
- { .ParamID = PARAM_STATUS_TGT_CONN,
- .ParamPrivileges = PARAM_PRIV_READ,
- .ParamValue = 0x00 },
-
- { .ParamID = PARAM_DISCHARGEDELAY,
- .ParamPrivileges = PARAM_PRIV_WRITE,
- .ParamValue = 0x00 },
- };
-
-
-/** Loads saved non-volatile parameter values from the EEPROM into the parameter table, as needed. */
-void V2Params_LoadNonVolatileParamValues(void)
-{
- /* Target RESET line polarity is a non-volatile value, retrieve current parameter value from EEPROM -
- * NB: Cannot call V2Protocol_SetParameterValue() here, as that will cause another EEPROM write! */
- V2Params_GetParamFromTable(PARAM_RESET_POLARITY)->ParamValue = eeprom_read_byte(&EEPROM_Rest_Polarity);
-}
-
-/** Updates any parameter values that are sourced from hardware rather than explicitly set by the host, such as
- * VTARGET levels from the ADC on supported AVR models.
- */
-void V2Params_UpdateParamValues(void)
-{
- #if defined(ADC)
- /* Update VTARGET parameter with the latest ADC conversion of VTARGET on supported AVR models */
- V2Params_GetParamFromTable(PARAM_VTARGET)->ParamValue = ((5 * 10 * ADC_GetResult()) / 1024);
- #endif
-}
-
-/** Retrieves the host PC read/write privileges for a given parameter in the parameter table. This should
- * be called before calls to \ref V2Params_GetParameterValue() or \ref V2Params_SetParameterValue() when
- * getting or setting parameter values in response to requests from the host.
- *
- * \param[in] ParamID Parameter ID whose privileges are to be retrieved from the table
- *
- * \return Privileges for the requested parameter, as a mask of PARAM_PRIV_* masks
- */
-uint8_t V2Params_GetParameterPrivileges(const uint8_t ParamID)
-{
- ParameterItem_t* ParamInfo = V2Params_GetParamFromTable(ParamID);
-
- if (ParamInfo == NULL)
- return 0;
-
- return ParamInfo->ParamPrivileges;
-}
-
-/** Retrieves the current value for a given parameter in the parameter table.
- *
- * \param[in] ParamID Parameter ID whose value is to be retrieved from the table
- *
- * \return Current value of the parameter in the table, or 0 if not found
- */
-uint8_t V2Params_GetParameterValue(const uint8_t ParamID)
-{
- ParameterItem_t* ParamInfo = V2Params_GetParamFromTable(ParamID);
-
- if (ParamInfo == NULL)
- return 0;
-
- return ParamInfo->ParamValue;
-}
-
-/** Sets the value for a given parameter in the parameter table.
- *
- * \param[in] ParamID Parameter ID whose value is to be set in the table
- * \param[in] Value New value to set the parameter to
- *
- * \return Pointer to the associated parameter information from the parameter table if found, NULL otherwise
- */
-void V2Params_SetParameterValue(const uint8_t ParamID, const uint8_t Value)
-{
- ParameterItem_t* ParamInfo = V2Params_GetParamFromTable(ParamID);
-
- if (ParamInfo == NULL)
- return;
-
- ParamInfo->ParamValue = Value;
-
- /* The target RESET line polarity is a non-volatile parameter, save to EEPROM when changed */
- if (ParamID == PARAM_RESET_POLARITY)
- eeprom_write_byte(&EEPROM_Rest_Polarity, Value);
-}
-
-/** Retrieves a parameter entry (including ID, value and privileges) from the parameter table that matches the given
- * parameter ID.
- *
- * \param[in] ParamID Parameter ID to find in the table
- *
- * \return Pointer to the associated parameter information from the parameter table if found, NULL otherwise
- */
-static ParameterItem_t* V2Params_GetParamFromTable(const uint8_t ParamID)
-{
- ParameterItem_t* CurrTableItem = ParameterTable;
-
- /* Find the parameter in the parameter table if present */
- for (uint8_t TableIndex = 0; TableIndex < (sizeof(ParameterTable) / sizeof(ParameterTable[0])); TableIndex++)
- {
- if (ParamID == CurrTableItem->ParamID)
- return CurrTableItem;
-
- CurrTableItem++;
- }
-
- return NULL;
-}
|