diff options
Diffstat (limited to 'Projects/TempDataLogger/TemperatureDataLogger.txt')
-rw-r--r-- | Projects/TempDataLogger/TemperatureDataLogger.txt | 85 |
1 files changed, 85 insertions, 0 deletions
diff --git a/Projects/TempDataLogger/TemperatureDataLogger.txt b/Projects/TempDataLogger/TemperatureDataLogger.txt new file mode 100644 index 000000000..136d0385b --- /dev/null +++ b/Projects/TempDataLogger/TemperatureDataLogger.txt @@ -0,0 +1,85 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \mainpage Temperature Datalogger Project + * + * \section SSec_Compat Demo Compatibility: + * + * The following list indicates what microcontrollers are compatible with this demo. + * + * - Series 7 USB AVRs + * - Series 6 USB AVRs + * - Series 4 USB AVRs (with >16KB of FLASH) + * + * \section SSec_Info USB Information: + * + * The following table gives a rundown of the USB utilization of this demo. + * + * <table> + * <tr> + * <td><b>USB Mode:</b></td> + * <td>Device</td> + * </tr> + * <tr> + * <td><b>USB Classes:</b></td> + * <td>Mass Storage Device \n + * Human Interface Device</td> + * </tr> + * <tr> + * <td><b>USB Subclasses:</b></td> + * <td>Bulk-Only Transport \n + * Keyboard Subclass</td> + * </tr> + * <tr> + * <td><b>Relevant Standards:</b></td> + * <td>USBIF Mass Storage Standard \n + * USB Bulk-Only Transport Standard \n + * SCSI Primary Commands Specification \n + * SCSI Block Commands Specification \n + * USBIF HID Specification, USBIF HID Usage Tables</td> + * </tr> + * <tr> + * <td><b>Usable Speeds:</b></td> + * <td>Full Speed Mode</td> + * </tr> + * </table> + * + * \section SSec_Description Project Description: + * + * Temperature Data Logger project. This project is a very basic USB data logger for the current temperature as reported by + * the board's temperature sensor, writing the temperature to a file stored on the board's Dataflash in a FAT filesystem + * each time a specified interval elapses. When inserted into a PC, the datalogger will appear as a standard USB Mass Storage + * device with a single text file, which contains the logged data. Files are named according to the current date when the + * logging commences. + * + * A DS1307 or compatible RTC IC is designed to be attached to the AVR's TWI bus, for the management of timestamps on the + * sampled data. This project will not function correctly if the RTC chip is omitted unless the DUMMY_RTC compile time token + * is specified - see \ref SSec_Options. + * + * Due to the host's need for exclusive access to the filesystem, the device will not log samples while connected to a host. + * For the logger to store data, the Dataflash must first be formatted by the host so that it contains a valid FAT filesystem. + * + * This project uses the FatFS library from ELM Chan (http://elm-chan.org/fsw/ff/00index_e.html) and the .NET HID device library + * LibHIDNet (http://sourceforge.net/projects/libhidnet/). + * + * \section SSec_Options Project Options + * + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. + * + * <table> + * <tr> + * <td><b>Define Name:</b></td> + * <td><b>Location:</b></td> + * <td><b>Description:</b></td> + * </tr> + * <tr> + * <td>DUMMY_RTC</td> + * <td>Makefile CDEFS</td> + * <td>When a DS1307 RTC chip is not fitted, this token can be defined to make the demo assume a 1/1/1 01:01:01 date/time + * stamp at all times, effectively transforming the project into a basic data logger with no specified sample times.</td> + * </tr> + * </table> + */ |