diff options
Diffstat (limited to 'Projects/XPLAINBridge')
| -rw-r--r-- | Projects/XPLAINBridge/Config/AppConfig.h | 66 | ||||
| -rw-r--r-- | Projects/XPLAINBridge/Config/LUFAConfig.h | 93 | ||||
| -rw-r--r-- | Projects/XPLAINBridge/Lib/SoftUART.h | 3 | ||||
| -rw-r--r-- | Projects/XPLAINBridge/USARTDescriptors.c | 11 | ||||
| -rw-r--r-- | Projects/XPLAINBridge/USARTDescriptors.h | 2 | ||||
| -rw-r--r-- | Projects/XPLAINBridge/XPLAINBridge.h | 2 | ||||
| -rw-r--r-- | Projects/XPLAINBridge/XPLAINBridge.txt | 16 | ||||
| -rw-r--r-- | Projects/XPLAINBridge/makefile | 23 |
8 files changed, 181 insertions, 35 deletions
diff --git a/Projects/XPLAINBridge/Config/AppConfig.h b/Projects/XPLAINBridge/Config/AppConfig.h new file mode 100644 index 000000000..260880c22 --- /dev/null +++ b/Projects/XPLAINBridge/Config/AppConfig.h @@ -0,0 +1,66 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Application Configuration Header File + * + * This is a header file which is be used to configure some of + * the application's compile time options, as an alternative to + * specifying the compile time constants supplied through a + * makefile or build system. + * + * For information on what each token does, refer to the + * \ref Sec_Options section of the application documentation. + */ + +#ifndef _APP_CONFIG_H_ +#define _APP_CONFIG_H_ + + #define AUX_LINE_PORT PORTB + #define AUX_LINE_PIN PINB + #define AUX_LINE_DDR DDRB + #define AUX_LINE_MASK (1 << 4) + +// #define ENABLE_ISP_PROTOCOL + #define ENABLE_XPROG_PROTOCOL + + #define VTARGET_ADC_CHANNEL 2 + #define VTARGET_REF_VOLTS 3.3 + #define VTARGET_SCALE_FACTOR 2 +// #define VTARGET_USE_INTERNAL_REF +// #define NO_VTARGET_DETECT +// #define XCK_RESCUE_CLOCK_ENABLE +// #define INVERTED_ISP_MISO + +// #define LIBUSB_DRIVER_COMPAT +// #define RESET_TOGGLES_LIBUSB_COMPAT +// #define FIRMWARE_VERSION_MINOR 0x11 + +#endif
\ No newline at end of file diff --git a/Projects/XPLAINBridge/Config/LUFAConfig.h b/Projects/XPLAINBridge/Config/LUFAConfig.h new file mode 100644 index 000000000..5c16ffb2b --- /dev/null +++ b/Projects/XPLAINBridge/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ + #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT + #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 16 + #define DEVICE_STATE_AS_GPIOR 0 + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT + #define NO_DEVICE_REMOTE_WAKEUP + #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Projects/XPLAINBridge/Lib/SoftUART.h b/Projects/XPLAINBridge/Lib/SoftUART.h index c30ad651e..e2492ce77 100644 --- a/Projects/XPLAINBridge/Lib/SoftUART.h +++ b/Projects/XPLAINBridge/Lib/SoftUART.h @@ -44,7 +44,8 @@ #include <stdbool.h> #include "../XPLAINBridge.h" - + #include "Config/AppConfig.h" + /* Macros: */ #define SRX PD0 #define SRXPIN PIND diff --git a/Projects/XPLAINBridge/USARTDescriptors.c b/Projects/XPLAINBridge/USARTDescriptors.c index 491b87590..2a96c1460 100644 --- a/Projects/XPLAINBridge/USARTDescriptors.c +++ b/Projects/XPLAINBridge/USARTDescriptors.c @@ -37,17 +37,6 @@ #include "USARTDescriptors.h" -/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as - * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL. - * This allows the host to track a device across insertions on different ports, allowing them to retain allocated - * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices - * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value - * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and - * port location). - */ -#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR) - #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor. -#endif /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall * device characteristics, including the supported USB version, control endpoint size and the diff --git a/Projects/XPLAINBridge/USARTDescriptors.h b/Projects/XPLAINBridge/USARTDescriptors.h index 84082ed2b..94476ec82 100644 --- a/Projects/XPLAINBridge/USARTDescriptors.h +++ b/Projects/XPLAINBridge/USARTDescriptors.h @@ -41,6 +41,8 @@ #include <LUFA/Drivers/USB/USB.h> + #include "Config/AppConfig.h" + /* Macros: */ /** Endpoint address of the CDC device-to-host notification IN endpoint. */ #define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 2) diff --git a/Projects/XPLAINBridge/XPLAINBridge.h b/Projects/XPLAINBridge/XPLAINBridge.h index abf2511e5..80e822af2 100644 --- a/Projects/XPLAINBridge/XPLAINBridge.h +++ b/Projects/XPLAINBridge/XPLAINBridge.h @@ -48,8 +48,8 @@ #include "AVRISPDescriptors.h" #include "Lib/V2Protocol.h" #include "Lib/SoftUART.h" + #include "Config/AppConfig.h" - #include <LUFA/Version.h> #include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/Misc/RingBuffer.h> #include <LUFA/Drivers/USB/USB.h> diff --git a/Projects/XPLAINBridge/XPLAINBridge.txt b/Projects/XPLAINBridge/XPLAINBridge.txt index b19ab4aca..3074b7b2f 100644 --- a/Projects/XPLAINBridge/XPLAINBridge.txt +++ b/Projects/XPLAINBridge/XPLAINBridge.txt @@ -80,7 +80,7 @@ * </tr> * <tr> * <td>LIBUSB_DRIVER_COMPAT</td> - * <td>Makefile LUFA_OPTS</td> + * <td>AppConfig.h</td> * <td>Define to switch to a non-standard endpoint scheme, breaking compatibility with AVRStudio under Windows but making * the code compatible with software such as avrdude (all platforms) that use the libUSB driver. * @@ -99,8 +99,20 @@ * \note This option is incompatible with \c LIBUSB_DRIVER_COMPAT.</td> * </tr> * <tr> - * <td>FIRMWARE_VERSION_MINOR</td> + * <td>RESET_TOGGLES_LIBUSB_COMPAT</td> * <td>Makefile LUFA_OPTS</td> + * <td>Define to make the /RESET line of the AVR toggle between Jungo and libUSB driver compatibility modes. Each time the AVR is + * reset externally via the reset pin, the compatibility mode will be toggled. The compatibility mode is preserved between + * power cycles and is not toggled via other forms of reset such as Watchdog or Brown Out. + * + * When this option is enabled, all board LEDs will flash twice on startup for Jungo compatibility mode, and five times for + * libUSB compatibility mode. + * + * \note This option is incompatible with \c LIBUSB_DRIVER_COMPAT.</td> + * </tr> + * <tr> + * <td>FIRMWARE_VERSION_MINOR</td> + * <td>AppConfig.h</td> * <td>Define to set the minor firmware revision nunber reported to the host on request. By default this will use a firmware version compatible * with the latest Atmel IDE version, however if desired the reported minor value can be adjusted here.</td> * </tr> diff --git a/Projects/XPLAINBridge/makefile b/Projects/XPLAINBridge/makefile index 32690d506..5c962b574 100644 --- a/Projects/XPLAINBridge/makefile +++ b/Projects/XPLAINBridge/makefile @@ -124,25 +124,8 @@ AVRISP_PATH = ../AVRISP-MKII # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0 -LUFA_OPTS += -D ORDERED_EP_CONFIG -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=16 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" -LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP -LUFA_OPTS += -D NO_DEVICE_SELF_POWER - -LUFA_OPTS += -D AUX_LINE_PORT=PORTB -LUFA_OPTS += -D AUX_LINE_PIN=PINB -LUFA_OPTS += -D AUX_LINE_DDR=DDRB -LUFA_OPTS += -D AUX_LINE_MASK="(1 << 4)" -LUFA_OPTS += -D VTARGET_ADC_CHANNEL=2 -LUFA_OPTS += -D VTARGET_REF_VOLTS=3.3 -LUFA_OPTS += -D VTARGET_SCALE_FACTOR=2 -#LUFA_OPTS += -D RESET_TOGGLES_LIBUSB_COMPAT -#LUFA_OPTS += -D LIBUSB_DRIVER_COMPAT -#LUFA_OPTS += -D FIRMWARE_VERSION_MINOR=0x11 +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER + # Create the LUFA source path variables by including the LUFA root makefile include $(LUFA_PATH)/LUFA/makefile @@ -196,7 +179,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ $(AVRISP_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ $(AVRISP_PATH)/ Config/ # Compiler flag to set the C Standard level. |