1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
|
/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage RNDIS Class Ethernet Demo (with Webserver/Telnet)
*
* \section Sec_Compat Demo Compatibility:
*
* The following list indicates what microcontrollers are compatible with this demo.
*
* \li Series 7 USB AVRs (AT90USBxxx7)
* \li Series 6 USB AVRs (AT90USBxxx6)
*
* \section Sec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
* <table>
* <tr>
* <td><b>USB Mode:</b></td>
* <td>Device</td>
* </tr>
* <tr>
* <td><b>USB Class:</b></td>
* <td>Communications Device Class (CDC)</td>
* </tr>
* <tr>
* <td><b>USB Subclass:</b></td>
* <td>Remote NDIS (Microsoft Proprietary CDC Class Networking Standard)</td>
* </tr>
* <tr>
* <td><b>Relevant Standards:</b></td>
* <td>Microsoft RNDIS Specification</td>
* </tr>
* <tr>
* <td><b>Supported USB Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
*
* \section Sec_Description Project Description:
*
* Remote Network Driver Interface demonstration application.
* This gives a simple reference application for implementing
* a CDC RNDIS device acting as a simple network interface for
* ethernet packet exchange. RNDIS is a proprietary Microsoft
* standard; this demo will only work on Windows 2000 (manually
* patched with the Microsoft RNDIS hotfix) and above (with no
* manual patches), or on the latest Linux kernels.
*
* Before running, you will need to install the INF file that
* is located in the RNDISEthernet project directory. This will
* enable Windows to use its inbuilt RNDIS drivers, negating the
* need for special Windows drivers for the device. To install,
* right-click the .INF file and choose the Install option. If
* Windows 2000 is used, the Microsoft INF file in the hotfix
* will need to be altered to use the VID/PID of the demo and
* then chosen instead of the LUFA RNDIS INF file when prompted.
*
* When enumerated, this demo will install as a new network
* adapter which ethernet packets can be sent to and received
* from. Running on top of the adapter is a very simple TCP/IP
* stack with a HTTP webserver and TELNET host which can be
* accessed through a web browser at IP address 10.0.0.2:80 or
* through a TELNET client at 10.0.0.2:25. This device also supports
* ping echos via the ICMP protocol.
*
* \note The TCP/IP stack in this demo has a number of limitations
* and should serve as an example only - it is not fully featured nor
* compliant to the TCP/IP specification. For complete projects, it is
* recommended that it be replaced with an external open source TCP/IP
* stack that is feature complete, such as the uIP stack.
*
* \section Sec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*
* <table>
* <tr>
* <td><b>Define Name:</b></td>
* <td><b>Location:</b></td>
* <td><b>Description:</b></td>
* </tr>
* <tr>
* <td>CLIENT_IP_ADDRESS</td>
* <td>AppConfig.h</td>
* <td>Configures the IP address given to the client (PC) via the DHCP server.</td>
* </tr>
* <tr>
* <td>SERVER_IP_ADDRESS</td>
* <td>AppConfig.h</td>
* <td>Configures the IP address of the virtual server.</td>
* </tr>
* <tr>
* <td>ADAPTER_MAC_ADDRESS</td>
* <td>AppConfig.h</td>
* <td>Configures the MAC address of the RNDIS adapter on the host (PC) side.</td>
* </tr>
* <tr>
* <td>SERVER_MAC_ADDRESS</td>
* <td>AppConfig.h</td>
* <td>Configures the MAC address of the virtual server on the network.</td>
* </tr>
* <tr>
* <td>NO_DECODE_ETHERNET</td>
* <td>AppConfig.h</td>
* <td>When defined, received Ethernet headers will not be decoded and printed to the device serial port.</td>
* </tr>
* <tr>
* <td>NO_DECODE_ARP</td>
* <td>AppConfig.h</td>
* <td>When defined, received ARP headers will not be decoded and printed to the device serial port.</td>
* </tr>
* <tr>
* <td>NO_DECODE_IP</td>
* <td>AppConfig.h</td>
* <td>When defined, received IP headers will not be decoded and printed to the device serial port.</td>
* </tr>
* <tr>
* <td>NO_DECODE_ICMP</td>
* <td>AppConfig.h</td>
* <td>When defined, received ICMP headers will not be decoded and printed to the device serial port.</td>
* </tr>
* <tr>
* <td>NO_DECODE_TCP</td>
* <td>AppConfig.h</td>
* <td>When defined, received TCP headers will not be decoded and printed to the device serial port.</td>
* </tr>
* <tr>
* <td>NO_DECODE_UDP</td>
* <td>AppConfig.h</td>
* <td>When defined, received UDP headers will not be decoded and printed to the device serial port.</td>
* </tr>
* <tr>
* <td>NO_DECODE_DHCP</td>
* <td>AppConfig.h</td>
* <td>When defined, received DHCP headers will not be decoded and printed to the device serial port.</td>
* </tr>
* </table>
*/
|
