1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
|
/*
LUFA Library
Copyright (C) Dean Camera, 2010.
dean [at] fourwalledcubicle [dot] com
www.fourwalledcubicle.com
*/
/*
Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* RFCOMM layer module. This module manages the RFCOMM layer of the
* stack, providing virtual serial port channels on top of the lower
* L2CAP layer.
*/
#define INCLUDE_FROM_RFCOMM_C
#include "RFCOMM.h"
/** 8-Bit CRC table used by the FCS field of each RFCOMM encoded frame, sourced from the ETSI TS 101 369 V7.2.0
* specification document, upon which the RFCOMM specification is based.
*/
const uint8_t CRC8_Table[256] PROGMEM =
{
0x00, 0x91, 0xE3, 0x72, 0x07, 0x96, 0xE4, 0x75, 0x0E, 0x9F, 0xED, 0x7C, 0x09, 0x98, 0xEA, 0x7B,
0x1C, 0x8D, 0xFF, 0x6E, 0x1B, 0x8A, 0xF8, 0x69, 0x12, 0x83, 0xF1, 0x60, 0x15, 0x84, 0xF6, 0x67,
0x38, 0xA9, 0xDB, 0x4A, 0x3F, 0xAE, 0xDC, 0x4D, 0x36, 0xA7, 0xD5, 0x44, 0x31, 0xA0, 0xD2, 0x43,
0x24, 0xB5, 0xC7, 0x56, 0x23, 0xB2, 0xC0, 0x51, 0x2A, 0xBB, 0xC9, 0x58, 0x2D, 0xBC, 0xCE, 0x5F,
0x70, 0xE1, 0x93, 0x02, 0x77, 0xE6, 0x94, 0x05, 0x7E, 0xEF, 0x9D, 0x0C, 0x79, 0xE8, 0x9A, 0x0B,
0x6C, 0xFD, 0x8F, 0x1E, 0x6B, 0xFA, 0x88, 0x19, 0x62, 0xF3, 0x81, 0x10, 0x65, 0xF4, 0x86, 0x17,
0x48, 0xD9, 0xAB, 0x3A, 0x4F, 0xDE, 0xAC, 0x3D, 0x46, 0xD7, 0xA5, 0x34, 0x41, 0xD0, 0xA2, 0x33,
0x54, 0xC5, 0xB7, 0x26, 0x53, 0xC2, 0xB0, 0x21, 0x5A, 0xCB, 0xB9, 0x28, 0x5D, 0xCC, 0xBE, 0x2F,
0xE0, 0x71, 0x03, 0x92, 0xE7, 0x76, 0x04, 0x95, 0xEE, 0x7F, 0x0D, 0x9C, 0xE9, 0x78, 0x0A, 0x9B,
0xFC, 0x6D, 0x1F, 0x8E, 0xFB, 0x6A, 0x18, 0x89, 0xF2, 0x63, 0x11, 0x80, 0xF5, 0x64, 0x16, 0x87,
0xD8, 0x49, 0x3B, 0xAA, 0xDF, 0x4E, 0x3C, 0xAD, 0xD6, 0x47, 0x35, 0xA4, 0xD1, 0x40, 0x32, 0xA3,
0xC4, 0x55, 0x27, 0xB6, 0xC3, 0x52, 0x20, 0xB1, 0xCA, 0x5B, 0x29, 0xB8, 0xCD, 0x5C, 0x2E, 0xBF,
0x90, 0x01, 0x73, 0xE2, 0x97, 0x06, 0x74, 0xE5, 0x9E, 0x0F, 0x7D, 0xEC, 0x99, 0x08, 0x7A, 0xEB,
0x8C, 0x1D, 0x6F, 0xFE, 0x8B, 0x1A, 0x68, 0xF9, 0x82, 0x13, 0x61, 0xF0, 0x85, 0x14, 0x66, 0xF7,
0xA8, 0x39, 0x4B, 0xDA, 0xAF, 0x3E, 0x4C, 0xDD, 0xA6, 0x37, 0x45, 0xD4, 0xA1, 0x30, 0x42, 0xD3,
0xB4, 0x25, 0x57, 0xC6, 0xB3, 0x22, 0x50, 0xC1, 0xBA, 0x2B, 0x59, 0xC8, 0xBD, 0x2C, 0x5E, 0xCF
};
/** RFCOMM channel state structure, to retain information about each open channel in the RFCOMM multiplexer. */
RFCOMM_Channel_t RFCOMM_Channels[RFCOMM_MAX_OPEN_CHANNELS];
/** Initializes the RFCOMM service, ready for new connections from a SDP client. */
void RFCOMM_Initialize(void)
{
/* Reset the RFCOMM channel structures, to invalidate any configured RFCOMM channels */
for (uint8_t i = 0; i < RFCOMM_MAX_OPEN_CHANNELS; i++)
RFCOMM_Channels[i].State = RFCOMM_Channel_Closed;
}
/** Services all the logical RFCOMM channels on the given ACL channel, sending any RFCOMM control requests to
* the remote device as needed to establish new logical RFCOMM channels. This function should be called repeatedly
* in the main program loop when an ACL channel with an RFCOMM PSM has been established between the local and remote
* device.
*
* \param[in] ACLChannel ACL channel which has been previously opened to handle RFCOMM traffic between devices
*/
void RFCOMM_ServiceChannels(Bluetooth_Channel_t* const ACLChannel)
{
/* Abort if the RFCOMM ACL channel is not currently open */
if ((ACLChannel == NULL) || (ACLChannel->State != BT_Channel_Open))
return;
/* Loop through each of the RFCOMM channels, send any required RFCOMM control commands */
for (uint8_t i = 0; i < RFCOMM_MAX_OPEN_CHANNELS; i++)
{
RFCOMM_Channel_t* RFCOMMChannel = &RFCOMM_Channels[i];
if (RFCOMMChannel->State == RFCOMM_Channel_Configure)
{
/* Check if the local signals have not yet been sent on the current channel */
if (!(RFCOMMChannel->ConfigFlags & RFCOMM_CONFIG_LOCALSIGNALSSENT))
{
/* Indicate that the local signals have been sent, transmit them to the remote device */
RFCOMMChannel->ConfigFlags |= RFCOMM_CONFIG_LOCALSIGNALSSENT;
RFCOMM_SendChannelSignals(RFCOMMChannel, ACLChannel);
}
/* If signals have been configured in both directions, progress to the open state */
if ((RFCOMMChannel->ConfigFlags & (RFCOMM_CONFIG_REMOTESIGNALS | RFCOMM_CONFIG_LOCALSIGNALS)) ==
(RFCOMM_CONFIG_REMOTESIGNALS | RFCOMM_CONFIG_LOCALSIGNALS))
{
RFCOMMChannel->State = RFCOMM_Channel_Open;
RFCOMM_ChannelOpened(RFCOMMChannel);
}
}
}
}
/** Processes an incoming RFCOMM packet on an ACL channel which has been previously opened between the local and
* a remote device to handle RFCOMM traffic.
*
* \param[in] Data Incoming packet data containing the RFCOMM packet
* \param[in] ACLChannel ACL channel the request was issued to by the remote device
*/
void RFCOMM_ProcessPacket(void* Data,
Bluetooth_Channel_t* const ACLChannel)
{
const RFCOMM_Header_t* FrameHeader = (const RFCOMM_Header_t*)Data;
const uint8_t* FrameData = (const uint8_t*)Data + sizeof(RFCOMM_Header_t);
uint16_t FrameDataLen = RFCOMM_GetVariableFieldValue(&FrameData);
/* Decode the RFCOMM frame type from the header */
switch (FrameHeader->Control & ~FRAME_POLL_FINAL)
{
case RFCOMM_Frame_DM:
RFCOMM_ProcessDM(&FrameHeader->Address, ACLChannel);
break;
case RFCOMM_Frame_DISC:
RFCOMM_ProcessDISC(&FrameHeader->Address, ACLChannel);
break;
case RFCOMM_Frame_SABM:
RFCOMM_ProcessSABM(&FrameHeader->Address, ACLChannel);
break;
case RFCOMM_Frame_UA:
RFCOMM_ProcessUA(&FrameHeader->Address, ACLChannel);
break;
case RFCOMM_Frame_UIH:
RFCOMM_ProcessUIH(&FrameHeader->Address, FrameDataLen, FrameData, ACLChannel);
break;
default:
BT_RFCOMM_DEBUG(1, "<< Unknown Frame Received");
break;
}
}
/** Sends an RFCOMM notification to the remote device that the local terminal control signals (located in the
* "Local" structure of the RFCOMM channel) have changed, pushing the new signals to the remote device.
*
* \param[in] RFCOMMChannel RFCOMM logical channel whose local terminal signals have changed
* \param[in] ACLChannel ACL channel which has been opened to carry RFCOMM traffic between devices
*/
void RFCOMM_SendChannelSignals(const RFCOMM_Channel_t* const RFCOMMChannel,
Bluetooth_Channel_t* const ACLChannel)
{
BT_RFCOMM_DEBUG(1, ">> MSC Command");
BT_RFCOMM_DEBUG(2, "-- DLCI 0x%02X", RFCOMMChannel->DLCI);
struct
{
RFCOMM_Command_t CommandHeader;
uint8_t Length;
RFCOMM_MSC_Parameters_t Params;
} MSCommand;
MSCommand.CommandHeader = (RFCOMM_Command_t){.Command = RFCOMM_Control_ModemStatus, .EA = true, .CR = true};
MSCommand.Length = (sizeof(MSCommand.Params) << 1) | 0x01;
MSCommand.Params.Channel = (RFCOMM_Address_t){.DLCI = RFCOMMChannel->DLCI, .EA = true, .CR = true};
MSCommand.Params.Signals = RFCOMMChannel->Local.Signals;
MSCommand.Params.BreakSignal = RFCOMMChannel->Local.BreakSignal;
/* Send the MSC command to the remote device */
RFCOMM_SendFrame(RFCOMM_CONTROL_DLCI, true, RFCOMM_Frame_UIH, sizeof(MSCommand), &MSCommand, ACLChannel);
}
/** Sends new data through an open logical RFCOMM channel. This should be used to transmit data through a
* RFCOMM channel once it has been opened.
*
* \param[in] DataLen Length of the RFCOMM data to send, in bytes
* \param[in] Data Pointer to a buffer where the data to send is located
* \param[in] RFCOMMChannel RFCOMM logical channel which is to be transmitted to
* \param[in] ACLChannel ACL channel which has been opened to carry RFCOMM traffic between devices
*/
void RFCOMM_SendData(const uint16_t DataLen,
const uint8_t* Data,
const RFCOMM_Channel_t* const RFCOMMChannel,
Bluetooth_Channel_t* const ACLChannel)
{
if (RFCOMMChannel->State != RFCOMM_Channel_Open)
return;
BT_RFCOMM_DEBUG(1, ">> UIH Frame");
BT_RFCOMM_DEBUG(2, "-- DLCI 0x%02X", RFCOMMChannel->DLCI);
/* Send the MSC command to the remote device */
RFCOMM_SendFrame(RFCOMMChannel->DLCI, false, RFCOMM_Frame_UIH, DataLen, Data, ACLChannel);
}
RFCOMM_Channel_t* RFCOMM_GetFreeChannelEntry(const uint8_t DLCI)
{
/* Find a free entry in the RFCOMM channel multiplexer state array */
for (uint8_t i = 0; i < RFCOMM_MAX_OPEN_CHANNELS; i++)
{
RFCOMM_Channel_t* RFCOMMChannel = &RFCOMM_Channels[i];
/* If the channel's state is closed, the channel state entry is free */
if (RFCOMMChannel->State == RFCOMM_Channel_Closed)
{
RFCOMMChannel->DLCI = DLCI;
RFCOMMChannel->State = RFCOMM_Channel_Configure;
RFCOMMChannel->Priority = 7 + (RFCOMMChannel->DLCI & 0xF8);
RFCOMMChannel->MTU = 0xFFFF;
RFCOMMChannel->Remote.Signals = 0 | (1 << 0);
RFCOMMChannel->Remote.BreakSignal = 0 | (1 << 0);
RFCOMMChannel->Local.Signals = RFCOMM_SIGNAL_RTC | RFCOMM_SIGNAL_RTR | RFCOMM_SIGNAL_DV | (1 << 0);
RFCOMMChannel->Local.BreakSignal = 0 | (1 << 0);
RFCOMMChannel->ConfigFlags = 0;
return RFCOMMChannel;
}
}
return NULL;
}
RFCOMM_Channel_t* RFCOMM_GetChannelData(const uint8_t DLCI)
{
/* Search through the RFCOMM channel list, looking for the specified channel */
for (uint8_t i = 0; i < RFCOMM_MAX_OPEN_CHANNELS; i++)
{
RFCOMM_Channel_t* CurrRFCOMMChannel = &RFCOMM_Channels[i];
/* If the current non-closed channel's DLCI matches the search DLCI, return it to the caller */
if ((CurrRFCOMMChannel->State != RFCOMM_Channel_Closed) && (CurrRFCOMMChannel->DLCI == DLCI))
return CurrRFCOMMChannel;
}
/* Channel not found in the channel state table, return failure */
return NULL;
}
uint16_t RFCOMM_GetVariableFieldValue(const uint8_t** BufferPos)
{
uint8_t FirstOctet;
uint8_t SecondOctet = 0;
FirstOctet = **BufferPos;
(*BufferPos)++;
/* If the field size is more than a single byte, fetch the next byte in the variable length field */
if (!(FirstOctet & 0x01))
{
SecondOctet = **BufferPos;
(*BufferPos)++;
/* Discard any remaining bytes in the variable length field that won't fit in the return value */
while (!(**BufferPos & 0x01))
(*BufferPos)++;
}
/* Bit-shift the bytes that comprise the variable length field so that they form a single integer */
return (((uint16_t)SecondOctet << 7) | FirstOctet >> 1);
}
void RFCOMM_SendFrame(const uint8_t DLCI,
const bool CommandResponse,
const uint8_t Control,
const uint16_t DataLen,
const void* Data,
Bluetooth_Channel_t* const ACLChannel)
{
struct
{
RFCOMM_Header_t FrameHeader;
uint8_t Size[(DataLen < 128) ? 1 : 2];
uint8_t Data[DataLen];
uint8_t FCS;
} ResponsePacket;
/* Set the frame header values to the specified address and frame type */
ResponsePacket.FrameHeader.Control = Control;
ResponsePacket.FrameHeader.Address = (RFCOMM_Address_t){.DLCI = DLCI, .EA = true, .CR = CommandResponse};
/* Set the lower 7 bits of the packet length */
ResponsePacket.Size[0] = (DataLen << 1);
/* Terminate the size field if size is 7 bits or lower, otherwise set the upper 8 bits of the length */
if (DataLen < 128)
ResponsePacket.Size[0] |= 0x01;
else
ResponsePacket.Size[1] = (DataLen >> 7);
/* Copy over the packet data from the source buffer to the response packet buffer */
memcpy(ResponsePacket.Data, Data, DataLen);
/* Determine the length of the frame which is to be used to calculate the CRC value */
uint8_t CRCLength = sizeof(ResponsePacket.FrameHeader);
/* UIH frames do not have the CRC calculated on the Size field in the response, all other frames do */
if ((Control & ~FRAME_POLL_FINAL) != RFCOMM_Frame_UIH)
CRCLength += sizeof(ResponsePacket.Size);
/* Calculate the frame checksum from the appropriate fields */
ResponsePacket.FCS = RFCOMM_GetFCSValue(&ResponsePacket, CRCLength);
/* Send the completed response packet to the sender */
Bluetooth_SendPacket(&ResponsePacket, sizeof(ResponsePacket), ACLChannel);
}
static uint8_t RFCOMM_GetFCSValue(const void* FrameStart,
uint8_t Length)
{
uint8_t FCS = 0xFF;
/* Calculate new Frame CRC value via the given data bytes and the CRC table */
for (uint8_t i = 0; i < Length; i++)
FCS = pgm_read_byte(&CRC8_Table[FCS ^ ((const uint8_t*)FrameStart)[i]]);
return ~FCS;
}
static void RFCOMM_ProcessDM(const RFCOMM_Address_t* const FrameAddress,
Bluetooth_Channel_t* const ACLChannel)
{
BT_RFCOMM_DEBUG(1, "<< DM Received");
BT_RFCOMM_DEBUG(2, "-- DLCI 0x%02X", FrameAddress->DLCI);
}
static void RFCOMM_ProcessDISC(const RFCOMM_Address_t* const FrameAddress,
Bluetooth_Channel_t* const ACLChannel)
{
BT_RFCOMM_DEBUG(1, "<< DISC Received");
BT_RFCOMM_DEBUG(2, "-- DLCI 0x%02X", FrameAddress->DLCI);
RFCOMM_Channel_t* RFCOMMChannel = RFCOMM_GetChannelData(FrameAddress->DLCI);
/* If the requested channel is currently open, destroy it */
if (RFCOMMChannel != NULL)
RFCOMMChannel->State = RFCOMM_Channel_Closed;
BT_RFCOMM_DEBUG(1, ">> UA Sent");
RFCOMM_SendFrame(FrameAddress->DLCI, true, (RFCOMM_Frame_UA | FRAME_POLL_FINAL), 0, NULL, ACLChannel);
}
static void RFCOMM_ProcessSABM(const RFCOMM_Address_t* const FrameAddress,
Bluetooth_Channel_t* const ACLChannel)
{
BT_RFCOMM_DEBUG(1, "<< SABM Received");
BT_RFCOMM_DEBUG(2, "-- DLCI 0x%02X", FrameAddress->DLCI);
if (FrameAddress->DLCI == RFCOMM_CONTROL_DLCI)
{
BT_RFCOMM_DEBUG(1, ">> UA Sent");
/* Free channel found, or request was to the control channel - accept SABM by sending a UA frame */
RFCOMM_SendFrame(FrameAddress->DLCI, true, (RFCOMM_Frame_UA | FRAME_POLL_FINAL), 0, NULL, ACLChannel);
return;
}
/* Find the existing channel's entry in the channel table */
RFCOMM_Channel_t* RFCOMMChannel = RFCOMM_GetChannelData(FrameAddress->DLCI);
/* Existing entry not found, create a new entry for the channel */
if (RFCOMMChannel == NULL)
RFCOMMChannel = RFCOMM_GetFreeChannelEntry(FrameAddress->DLCI);
/* If space was found in the channel table for the new channel, ACK the request */
if (RFCOMMChannel != NULL)
{
BT_RFCOMM_DEBUG(1, ">> UA Sent");
/* Free channel found, or request was to the control channel - accept SABM by sending a UA frame */
RFCOMM_SendFrame(FrameAddress->DLCI, true, (RFCOMM_Frame_UA | FRAME_POLL_FINAL), 0, NULL, ACLChannel);
}
else
{
BT_RFCOMM_DEBUG(1, ">> DM Sent");
/* No free channel in the multiplexer - decline the SABM by sending a DM frame */
RFCOMM_SendFrame(FrameAddress->DLCI, true, (RFCOMM_Frame_DM | FRAME_POLL_FINAL), 0, NULL, ACLChannel);
}
}
static void RFCOMM_ProcessUA(const RFCOMM_Address_t* const FrameAddress,
Bluetooth_Channel_t* const ACLChannel)
{
BT_RFCOMM_DEBUG(1, "<< UA Received");
BT_RFCOMM_DEBUG(2, "-- DLCI 0x%02X", FrameAddress->DLCI);
}
static void RFCOMM_ProcessUIH(const RFCOMM_Address_t* const FrameAddress,
const uint16_t FrameLength,
const uint8_t* FrameData,
Bluetooth_Channel_t* const ACLChannel)
{
if (FrameAddress->DLCI == RFCOMM_CONTROL_DLCI)
{
RFCOMM_ProcessControlCommand(FrameData, ACLChannel);
return;
}
BT_RFCOMM_DEBUG(1, "<< UIH Received");
BT_RFCOMM_DEBUG(2, "-- DLCI 0x%02X", FrameAddress->DLCI);
BT_RFCOMM_DEBUG(2, "-- Length 0x%02X", FrameLength);
RFCOMM_Channel_t* RFCOMMChannel = RFCOMM_GetChannelData(FrameAddress->DLCI);
if (RFCOMMChannel != NULL)
RFCOMM_DataReceived(RFCOMMChannel, FrameLength, FrameData);
}
|