Clean up the driver directory structure by moving all board specific files into the boards sub-structure.

28 files changed, 768 insertions, 914 deletions

diff --git a/boards/addons/gdisp/ED060SC4_example_schematics.png b/boards/addons/gdisp/ED060SC4_example_schematics.png
new file mode 100644
index 00000000..0d9d095f
--- /dev/null
+++ b/boards/addons/gdisp/ED060SC4_example_schematics.png
diff --git a/drivers/gdisp/ED060SC4/board_ED060SC4_example.h b/boards/addons/gdisp/board_ED060SC4_example.h
index cb5a92b8..cb5a92b8 100644
--- a/drivers/gdisp/ED060SC4/board_ED060SC4_example.h
+++ b/boards/addons/gdisp/board_ED060SC4_example.h
diff --git a/drivers/gdisp/HX8347D/board_HX8347D_stm32f4discovery.h b/boards/addons/gdisp/board_HX8347D_stm32f4discovery.h
index df287477..df287477 100644
--- a/drivers/gdisp/HX8347D/board_HX8347D_stm32f4discovery.h
+++ b/boards/addons/gdisp/board_HX8347D_stm32f4discovery.h
diff --git a/drivers/gdisp/ILI9320/board_ILI9320_olimex_pic32mx_lcd.h b/boards/addons/gdisp/board_ILI9320_olimex_pic32mx_lcd.h
index 5315127b..5315127b 100644
--- a/drivers/gdisp/ILI9320/board_ILI9320_olimex_pic32mx_lcd.h
+++ b/boards/addons/gdisp/board_ILI9320_olimex_pic32mx_lcd.h
diff --git a/drivers/gdisp/ILI9320/board_ILI9320_olimex_stm32_lcd.h b/boards/addons/gdisp/board_ILI9320_olimex_stm32_lcd.h
index bca5caf8..bca5caf8 100644
--- a/drivers/gdisp/ILI9320/board_ILI9320_olimex_stm32_lcd.h
+++ b/boards/addons/gdisp/board_ILI9320_olimex_stm32_lcd.h
diff --git a/drivers/gdisp/ILI9325/board_ILI9325_hy_stm32_100p.h b/boards/addons/gdisp/board_ILI9325_hy_stm32_100p.h
index 60508c1a..60508c1a 100644
--- a/drivers/gdisp/ILI9325/board_ILI9325_hy_stm32_100p.h
+++ b/boards/addons/gdisp/board_ILI9325_hy_stm32_100p.h
diff --git a/drivers/gdisp/ILI9481/board_ILI9481_firebullstm32f103.h b/boards/addons/gdisp/board_ILI9481_firebullstm32f103.h
index 17bc554d..17bc554d 100644
--- a/drivers/gdisp/ILI9481/board_ILI9481_firebullstm32f103.h
+++ b/boards/addons/gdisp/board_ILI9481_firebullstm32f103.h
diff --git a/drivers/gdisp/RA8875/board_RA8875_marlin.h b/boards/addons/gdisp/board_RA8875_marlin.h
index b1d55a92..b1d55a92 100644
--- a/drivers/gdisp/RA8875/board_RA8875_marlin.h
+++ b/boards/addons/gdisp/board_RA8875_marlin.h
diff --git a/drivers/gdisp/S6D1121/board_S6D1121_olimex_e407.h b/boards/addons/gdisp/board_S6D1121_olimex_e407.h
index e0bb8e26..e0bb8e26 100644
--- a/drivers/gdisp/S6D1121/board_S6D1121_olimex_e407.h
+++ b/boards/addons/gdisp/board_S6D1121_olimex_e407.h
diff --git a/drivers/gdisp/SSD1289/board_SSD1289_firebullstm32f103.h b/boards/addons/gdisp/board_SSD1289_firebullstm32f103.h
index 99d37299..99d37299 100644
--- a/drivers/gdisp/SSD1289/board_SSD1289_firebullstm32f103.h
+++ b/boards/addons/gdisp/board_SSD1289_firebullstm32f103.h
diff --git a/drivers/gdisp/SSD1289/board_SSD1289_stm32f4discovery.h b/boards/addons/gdisp/board_SSD1289_stm32f4discovery.h
index 866311dc..866311dc 100644
--- a/drivers/gdisp/SSD1289/board_SSD1289_stm32f4discovery.h
+++ b/boards/addons/gdisp/board_SSD1289_stm32f4discovery.h
diff --git a/drivers/gdisp/SSD1306/board_SSD1306_i2c.h b/boards/addons/gdisp/board_SSD1306_i2c.h
index 449d47ba..449d47ba 100644
--- a/drivers/gdisp/SSD1306/board_SSD1306_i2c.h
+++ b/boards/addons/gdisp/board_SSD1306_i2c.h
diff --git a/drivers/gdisp/SSD1306/board_SSD1306_spi.h b/boards/addons/gdisp/board_SSD1306_spi.h
index 5b481630..5b481630 100644
--- a/drivers/gdisp/SSD1306/board_SSD1306_spi.h
+++ b/boards/addons/gdisp/board_SSD1306_spi.h
diff --git a/drivers/gdisp/SSD1963/board_SSD1963_fsmc.h b/boards/addons/gdisp/board_SSD1963_fsmc.h
index 6c7119a4..6c7119a4 100644
--- a/drivers/gdisp/SSD1963/board_SSD1963_fsmc.h
+++ b/boards/addons/gdisp/board_SSD1963_fsmc.h
diff --git a/drivers/gdisp/SSD1963/board_SSD1963_gpio.h b/boards/addons/gdisp/board_SSD1963_gpio.h
index 0b9c0135..0b9c0135 100644
--- a/drivers/gdisp/SSD1963/board_SSD1963_gpio.h
+++ b/boards/addons/gdisp/board_SSD1963_gpio.h
diff --git a/drivers/gdisp/SSD2119/board_SSD2119_embest_dmstf4bb.h b/boards/addons/gdisp/board_SSD2119_embest_dmstf4bb.h
index 927e93a4..927e93a4 100644
--- a/drivers/gdisp/SSD2119/board_SSD2119_embest_dmstf4bb.h
+++ b/boards/addons/gdisp/board_SSD2119_embest_dmstf4bb.h
diff --git a/drivers/ginput/touch/ADS7843/ginput_lld_mouse_board_firebull_stm32f103.h b/boards/addons/ginput/touch/ADS7843/ginput_lld_mouse_board_firebull_stm32f103.h
index ebcc26c7..63e9e3dd 100644
--- a/drivers/ginput/touch/ADS7843/ginput_lld_mouse_board_firebull_stm32f103.h
+++ b/boards/addons/ginput/touch/ADS7843/ginput_lld_mouse_board_firebull_stm32f103.h
@@ -4,87 +4,87 @@
  *
  *              http://ugfx.org/license.html
  */
-

-/**

- * @file    drivers/ginput/touch/ADS7843/ginput_lld_mouse_board_firebull_stm32f103.h

- * @brief   GINPUT ouch low level driver source for the ADS7843 on the FireBull STM32F103-FB board.

- *

- * @defgroup Mouse Mouse

- * @ingroup GINPUT

- * @{

- */

-

-#ifndef _GINPUT_LLD_MOUSE_BOARD_H

-#define _GINPUT_LLD_MOUSE_BOARD_H

-

-static const SPIConfig spicfg = { 

-    NULL,

-	GPIOC, 

-    6,

-    /* SPI_CR1_BR_2 |*/ SPI_CR1_BR_1 | SPI_CR1_BR_0,

-};

-

-/**

- * @brief   Initialise the board for the touch.

- *

- * @notapi

- */

-static inline void init_board(void) {

-	spiStart(&SPID1, &spicfg);

-}

-

-/**

- * @brief   Check whether the surface is currently touched

- * @return	TRUE if the surface is currently touched

- *

- * @notapi

- */

-static inline bool_t getpin_pressed(void) {

-	return (!palReadPad(GPIOC, 4));

-}

-/**

- * @brief   Aquire the bus ready for readings

- *

- * @notapi

- */

-static inline void aquire_bus(void) {

-	spiAcquireBus(&SPID1);

-    //TOUCHSCREEN_SPI_PROLOGUE();

-    palClearPad(GPIOC, 6);

-}

-

-/**

- * @brief   Release the bus after readings

- *

- * @notapi

- */

-static inline void release_bus(void) {

-	palSetPad(GPIOC, 6);

-	spiReleaseBus(&SPID1);

-    //TOUCHSCREEN_SPI_EPILOGUE();

-}

-

-/**

- * @brief   Read a value from touch controller

- * @return	The value read from the controller

- *

- * params[in] port	The controller port to read.

- *

- * @notapi

- */

-static inline uint16_t read_value(uint16_t port) {

-    static uint8_t txbuf[3] = {0};

-    static uint8_t rxbuf[3] = {0};

-    uint16_t ret;

-

-    txbuf[0] = port;

-

-    spiExchange(&SPID1, 3, txbuf, rxbuf);

-

-    ret = (rxbuf[1] << 5) | (rxbuf[2] >> 3); 

-    

-	return ret;

-}

-

-#endif /* _GINPUT_LLD_MOUSE_BOARD_H */

-/** @} */

+
+/**
+ * @file    drivers/ginput/touch/ADS7843/ginput_lld_mouse_board_firebull_stm32f103.h
+ * @brief   GINPUT ouch low level driver source for the ADS7843 on the FireBull STM32F103-FB board.
+ *
+ * @defgroup Mouse Mouse
+ * @ingroup GINPUT
+ * @{
+ */
+
+#ifndef _GINPUT_LLD_MOUSE_BOARD_H
+#define _GINPUT_LLD_MOUSE_BOARD_H
+
+static const SPIConfig spicfg = { 
+    NULL,
+	GPIOC, 
+    6,
+    /* SPI_CR1_BR_2 |*/ SPI_CR1_BR_1 | SPI_CR1_BR_0,
+};
+
+/**
+ * @brief   Initialise the board for the touch.
+ *
+ * @notapi
+ */
+static inline void init_board(void) {
+	spiStart(&SPID1, &spicfg);
+}
+
+/**
+ * @brief   Check whether the surface is currently touched
+ * @return	TRUE if the surface is currently touched
+ *
+ * @notapi
+ */
+static inline bool_t getpin_pressed(void) {
+	return (!palReadPad(GPIOC, 4));
+}
+/**
+ * @brief   Aquire the bus ready for readings
+ *
+ * @notapi
+ */
+static inline void aquire_bus(void) {
+	spiAcquireBus(&SPID1);
+    //TOUCHSCREEN_SPI_PROLOGUE();
+    palClearPad(GPIOC, 6);
+}
+
+/**
+ * @brief   Release the bus after readings
+ *
+ * @notapi
+ */
+static inline void release_bus(void) {
+	palSetPad(GPIOC, 6);
+	spiReleaseBus(&SPID1);
+    //TOUCHSCREEN_SPI_EPILOGUE();
+}
+
+/**
+ * @brief   Read a value from touch controller
+ * @return	The value read from the controller
+ *
+ * params[in] port	The controller port to read.
+ *
+ * @notapi
+ */
+static inline uint16_t read_value(uint16_t port) {
+    static uint8_t txbuf[3] = {0};
+    static uint8_t rxbuf[3] = {0};
+    uint16_t ret;
+
+    txbuf[0] = port;
+
+    spiExchange(&SPID1, 3, txbuf, rxbuf);
+
+    ret = (rxbuf[1] << 5) | (rxbuf[2] >> 3); 
+    
+	return ret;
+}
+
+#endif /* _GINPUT_LLD_MOUSE_BOARD_H */
+/** @} */
diff --git a/drivers/ginput/touch/ADS7843/ginput_lld_mouse_board_olimex_stm32_e407.h b/boards/addons/ginput/touch/ADS7843/ginput_lld_mouse_board_olimex_stm32_e407.h
index 01572f0d..e0ab85dc 100644
--- a/drivers/ginput/touch/ADS7843/ginput_lld_mouse_board_olimex_stm32_e407.h
+++ b/boards/addons/ginput/touch/ADS7843/ginput_lld_mouse_board_olimex_stm32_e407.h
@@ -4,87 +4,87 @@
  *
  *              http://ugfx.org/license.html
  */
-

-/**

- * @file    drivers/ginput/touch/ADS7843/ginput_lld_mouse_board_olimex_stm32_e407.h

- * @brief   GINPUT Touch low level driver source for the ADS7843 on an Olimex STM32E407.

- *

- * @defgroup Mouse Mouse

- * @ingroup GINPUT

- * @{

- */

-

-#ifndef _GINPUT_LLD_MOUSE_BOARD_H

-#define _GINPUT_LLD_MOUSE_BOARD_H

-

-static const SPIConfig spicfg = { 

-    NULL,

-	GPIOG, 

-    10,

-    /* SPI_CR1_BR_2 |*/ SPI_CR1_BR_1 | SPI_CR1_BR_0,

-};

-

-/**

- * @brief   Initialise the board for the touch.

- *

- * @notapi

- */

-static inline void init_board(void) {

-	spiStart(&SPID2, &spicfg);

-}

-

-/**

- * @brief   Check whether the surface is currently touched

- * @return	TRUE if the surface is currently touched

- *

- * @notapi

- */

-static inline bool_t getpin_pressed(void) {

-	return (!palReadPad(GPIOG, 0));

-}

-/**

- * @brief   Aquire the bus ready for readings

- *

- * @notapi

- */

-static inline void aquire_bus(void) {

-	spiAcquireBus(&SPID2);

-    //TOUCHSCREEN_SPI_PROLOGUE();

-    palClearPad(GPIOG, 10);

-}

-

-/**

- * @brief   Release the bus after readings

- *

- * @notapi

- */

-static inline void release_bus(void) {

-	palSetPad(GPIOG, 10);

-	spiReleaseBus(&SPID2);

-    //TOUCHSCREEN_SPI_EPILOGUE();

-}

-

-/**

- * @brief   Read a value from touch controller

- * @return	The value read from the controller

- *

- * params[in] port	The controller port to read.

- *

- * @notapi

- */

-static inline uint16_t read_value(uint16_t port) {

-    static uint8_t txbuf[3] = {0};

-    static uint8_t rxbuf[3] = {0};

-    uint16_t ret;

-

-    txbuf[0] = port;

-

-    spiExchange(&SPID2, 3, txbuf, rxbuf);

-

-    ret = (rxbuf[1] << 5) | (rxbuf[2] >> 3); 

-    

-	return ret;

-}

-

-#endif /* _GINPUT_LLD_MOUSE_BOARD_H */

-/** @} */

+
+/**
+ * @file    drivers/ginput/touch/ADS7843/ginput_lld_mouse_board_olimex_stm32_e407.h
+ * @brief   GINPUT Touch low level driver source for the ADS7843 on an Olimex STM32E407.
+ *
+ * @defgroup Mouse Mouse
+ * @ingroup GINPUT
+ * @{
+ */
+
+#ifndef _GINPUT_LLD_MOUSE_BOARD_H
+#define _GINPUT_LLD_MOUSE_BOARD_H
+
+static const SPIConfig spicfg = { 
+    NULL,
+	GPIOG, 
+    10,
+    /* SPI_CR1_BR_2 |*/ SPI_CR1_BR_1 | SPI_CR1_BR_0,
+};
+
+/**
+ * @brief   Initialise the board for the touch.
+ *
+ * @notapi
+ */
+static inline void init_board(void) {
+	spiStart(&SPID2, &spicfg);
+}
+
+/**
+ * @brief   Check whether the surface is currently touched
+ * @return	TRUE if the surface is currently touched
+ *
+ * @notapi
+ */
+static inline bool_t getpin_pressed(void) {
+	return (!palReadPad(GPIOG, 0));
+}
+/**
+ * @brief   Aquire the bus ready for readings
+ *
+ * @notapi
+ */
+static inline void aquire_bus(void) {
+	spiAcquireBus(&SPID2);
+    //TOUCHSCREEN_SPI_PROLOGUE();
+    palClearPad(GPIOG, 10);
+}
+
+/**
+ * @brief   Release the bus after readings
+ *
+ * @notapi
+ */
+static inline void release_bus(void) {
+	palSetPad(GPIOG, 10);
+	spiReleaseBus(&SPID2);
+    //TOUCHSCREEN_SPI_EPILOGUE();
+}
+
+/**
+ * @brief   Read a value from touch controller
+ * @return	The value read from the controller
+ *
+ * params[in] port	The controller port to read.
+ *
+ * @notapi
+ */
+static inline uint16_t read_value(uint16_t port) {
+    static uint8_t txbuf[3] = {0};
+    static uint8_t rxbuf[3] = {0};
+    uint16_t ret;
+
+    txbuf[0] = port;
+
+    spiExchange(&SPID2, 3, txbuf, rxbuf);
+
+    ret = (rxbuf[1] << 5) | (rxbuf[2] >> 3); 
+    
+	return ret;
+}
+
+#endif /* _GINPUT_LLD_MOUSE_BOARD_H */
+/** @} */
diff --git a/drivers/ginput/touch/ADS7843/ginput_lld_mouse_board_st_stm32f4_discovery.h b/boards/addons/ginput/touch/ADS7843/ginput_lld_mouse_board_st_stm32f4_discovery.h
index 158934b6..158934b6 100644
--- a/drivers/ginput/touch/ADS7843/ginput_lld_mouse_board_st_stm32f4_discovery.h
+++ b/boards/addons/ginput/touch/ADS7843/ginput_lld_mouse_board_st_stm32f4_discovery.h
diff --git a/drivers/ginput/touch/FT5x06/ginput_lld_mouse_board_marlin.h b/boards/addons/ginput/touch/FT5x06/ginput_lld_mouse_board_marlin.h
index e3e18c24..e3e18c24 100644
--- a/drivers/ginput/touch/FT5x06/ginput_lld_mouse_board_marlin.h
+++ b/boards/addons/ginput/touch/FT5x06/ginput_lld_mouse_board_marlin.h
diff --git a/drivers/ginput/touch/MCU/ginput_lld_mouse_board_olimex_pic32mx_lcd.h b/boards/addons/ginput/touch/MCU/ginput_lld_mouse_board_olimex_pic32mx_lcd.h
index c4689ecb..a7435c95 100644
--- a/drivers/ginput/touch/MCU/ginput_lld_mouse_board_olimex_pic32mx_lcd.h
+++ b/boards/addons/ginput/touch/MCU/ginput_lld_mouse_board_olimex_pic32mx_lcd.h
@@ -4,148 +4,148 @@
  *
  *              http://ugfx.org/license.html
  */
-

-/**

- * @file    drivers/ginput/touch/MCU/ginput_lld_mouse_board_olimex_stm32_lcd.h

- * @brief   GINPUT Touch low level driver source for the MCU on the example board.

- *

- * @defgroup Mouse Mouse

- * @ingroup GINPUT

- *

- * @{

- */

-

-#ifndef _GINPUT_LLD_MOUSE_BOARD_H

-#define _GINPUT_LLD_MOUSE_BOARD_H

-

-static const ADCConfig ADCC = {

-  .vref = ADC_VREF_CFG_AVDD_AVSS,

-  .stime = 15,

-  .irq = EIC_IRQ_ADC,

-  .base = _ADC10_BASE_ADDRESS,

-};

-static struct ADCDriver ADCD;

-

-#define YNEG 13 // U

-#define XNEG 15 // R

-#define XPOS 12 // L

-#define YPOS 11 // D

-

-#define ADC_MAX 1023

-

-#define TOUCH_THRESHOULD 50

-

-static const ADCConversionGroup ADC_X_CG = {

-  .circular = FALSE,

-  .num_channels = 1,

-  .channels = 1 << XNEG,

-};

-

-static const ADCConversionGroup ADC_Y_CG = {

-  .circular = FALSE,

-  .num_channels = 1,

-  .channels = 1 << YPOS,

-};

-

-/**

- * @brief   Initialise the board for the touch.

- *

- * @notapi

- */

-static inline void init_board(void) {

-  adcObjectInit(&ADCD);

-  adcStart(&ADCD, &ADCC);

-}

-

-/**

- * @brief   Check whether the surface is currently touched

- * @return	TRUE if the surface is currently touched

- *

- * @notapi

- */

-static inline bool_t getpin_pressed(void) {

-  adcsample_t samples[2] = {0, };

-

-  // Set X+ to ground

-  palSetPadMode(IOPORTB, XPOS, PAL_MODE_OUTPUT);

-  palClearPad(IOPORTB, XPOS);

-

-  // Set Y- to VCC

-  palSetPadMode(IOPORTB, YNEG, PAL_MODE_OUTPUT);

-  palSetPad(IOPORTB, YNEG);

-

-  palSetPadMode(IOPORTB, XNEG, PAL_MODE_INPUT_ANALOG);

-  palSetPadMode(IOPORTB, YPOS, PAL_MODE_INPUT_ANALOG);

-

-  adcConvert(&ADCD, &ADC_X_CG, &samples[0], 1);

-  adcConvert(&ADCD, &ADC_Y_CG, &samples[1], 1);

-

-  return (ADC_MAX - (samples[1] - samples[0])) > TOUCH_THRESHOULD;

-}

-

-/**

- * @brief   Aquire the bus ready for readings

- *

- * @notapi

- */

-static inline void aquire_bus(void) {

-}

-

-/**

- * @brief   Release the bus after readings

- *

- * @notapi

- */

-static inline void release_bus(void) {

-}

-

-/**

- * @brief   Read an x value from touch controller

- * @return	The value read from the controller

- *

- * @notapi

- */

-static inline uint16_t read_x_value(void) {

-  adcsample_t sample;

-

-  palSetPadMode(IOPORTB, XPOS, PAL_MODE_OUTPUT);

-  palSetPad(IOPORTB, XPOS);

-

-  palSetPadMode(IOPORTB, XNEG, PAL_MODE_OUTPUT);

-  palClearPad(IOPORTB, XNEG);

-

-  palSetPadMode(IOPORTB, YNEG, PAL_MODE_INPUT);

-

-  palSetPadMode(IOPORTB, YPOS, PAL_MODE_INPUT_ANALOG);

-

-  adcConvert(&ADCD, &ADC_Y_CG, &sample, 1);

-

-  return ADC_MAX - sample;

-}

-

-/**

- * @brief   Read an y value from touch controller

- * @return	The value read from the controller

- *

- * @notapi

- */

-static inline uint16_t read_y_value(void) {

-  adcsample_t sample;

-

-  palSetPadMode(IOPORTB, YNEG, PAL_MODE_OUTPUT);

-  palClearPad(IOPORTB, YNEG);

-

-  palSetPadMode(IOPORTB, YPOS, PAL_MODE_OUTPUT);

-  palSetPad(IOPORTB, YPOS);

-

-  palSetPadMode(IOPORTB, XPOS, PAL_MODE_INPUT);

-

-  palSetPadMode(IOPORTB, XNEG, PAL_MODE_INPUT_ANALOG);

-

-  adcConvert(&ADCD, &ADC_X_CG, &sample, 1);

-

-  return ADC_MAX - sample;

-}

-

-#endif /* _GINPUT_LLD_MOUSE_BOARD_H */

-/** @} */

+
+/**
+ * @file    drivers/ginput/touch/MCU/ginput_lld_mouse_board_olimex_stm32_lcd.h
+ * @brief   GINPUT Touch low level driver source for the MCU on the example board.
+ *
+ * @defgroup Mouse Mouse
+ * @ingroup GINPUT
+ *
+ * @{
+ */
+
+#ifndef _GINPUT_LLD_MOUSE_BOARD_H
+#define _GINPUT_LLD_MOUSE_BOARD_H
+
+static const ADCConfig ADCC = {
+  .vref = ADC_VREF_CFG_AVDD_AVSS,
+  .stime = 15,
+  .irq = EIC_IRQ_ADC,
+  .base = _ADC10_BASE_ADDRESS,
+};
+static struct ADCDriver ADCD;
+
+#define YNEG 13 // U
+#define XNEG 15 // R
+#define XPOS 12 // L
+#define YPOS 11 // D
+
+#define ADC_MAX 1023
+
+#define TOUCH_THRESHOULD 50
+
+static const ADCConversionGroup ADC_X_CG = {
+  .circular = FALSE,
+  .num_channels = 1,
+  .channels = 1 << XNEG,
+};
+
+static const ADCConversionGroup ADC_Y_CG = {
+  .circular = FALSE,
+  .num_channels = 1,
+  .channels = 1 << YPOS,
+};
+
+/**
+ * @brief   Initialise the board for the touch.
+ *
+ * @notapi
+ */
+static inline void init_board(void) {
+  adcObjectInit(&ADCD);
+  adcStart(&ADCD, &ADCC);
+}
+
+/**
+ * @brief   Check whether the surface is currently touched
+ * @return	TRUE if the surface is currently touched
+ *
+ * @notapi
+ */
+static inline bool_t getpin_pressed(void) {
+  adcsample_t samples[2] = {0, };
+
+  // Set X+ to ground
+  palSetPadMode(IOPORTB, XPOS, PAL_MODE_OUTPUT);
+  palClearPad(IOPORTB, XPOS);
+
+  // Set Y- to VCC
+  palSetPadMode(IOPORTB, YNEG, PAL_MODE_OUTPUT);
+  palSetPad(IOPORTB, YNEG);
+
+  palSetPadMode(IOPORTB, XNEG, PAL_MODE_INPUT_ANALOG);
+  palSetPadMode(IOPORTB, YPOS, PAL_MODE_INPUT_ANALOG);
+
+  adcConvert(&ADCD, &ADC_X_CG, &samples[0], 1);
+  adcConvert(&ADCD, &ADC_Y_CG, &samples[1], 1);
+
+  return (ADC_MAX - (samples[1] - samples[0])) > TOUCH_THRESHOULD;
+}
+
+/**
+ * @brief   Aquire the bus ready for readings
+ *
+ * @notapi
+ */
+static inline void aquire_bus(void) {
+}
+
+/**
+ * @brief   Release the bus after readings
+ *
+ * @notapi
+ */
+static inline void release_bus(void) {
+}
+
+/**
+ * @brief   Read an x value from touch controller
+ * @return	The value read from the controller
+ *
+ * @notapi
+ */
+static inline uint16_t read_x_value(void) {
+  adcsample_t sample;
+
+  palSetPadMode(IOPORTB, XPOS, PAL_MODE_OUTPUT);
+  palSetPad(IOPORTB, XPOS);
+
+  palSetPadMode(IOPORTB, XNEG, PAL_MODE_OUTPUT);
+  palClearPad(IOPORTB, XNEG);
+
+  palSetPadMode(IOPORTB, YNEG, PAL_MODE_INPUT);
+
+  palSetPadMode(IOPORTB, YPOS, PAL_MODE_INPUT_ANALOG);
+
+  adcConvert(&ADCD, &ADC_Y_CG, &sample, 1);
+
+  return ADC_MAX - sample;
+}
+
+/**
+ * @brief   Read an y value from touch controller
+ * @return	The value read from the controller
+ *
+ * @notapi
+ */
+static inline uint16_t read_y_value(void) {
+  adcsample_t sample;
+
+  palSetPadMode(IOPORTB, YNEG, PAL_MODE_OUTPUT);
+  palClearPad(IOPORTB, YNEG);
+
+  palSetPadMode(IOPORTB, YPOS, PAL_MODE_OUTPUT);
+  palSetPad(IOPORTB, YPOS);
+
+  palSetPadMode(IOPORTB, XPOS, PAL_MODE_INPUT);
+
+  palSetPadMode(IOPORTB, XNEG, PAL_MODE_INPUT_ANALOG);
+
+  adcConvert(&ADCD, &ADC_X_CG, &sample, 1);
+
+  return ADC_MAX - sample;
+}
+
+#endif /* _GINPUT_LLD_MOUSE_BOARD_H */
+/** @} */
diff --git a/drivers/ginput/touch/MCU/ginput_lld_mouse_board_olimex_stm32_lcd.h b/boards/addons/ginput/touch/MCU/ginput_lld_mouse_board_olimex_stm32_lcd.h
index 2cc58f3c..ca177a89 100644
--- a/drivers/ginput/touch/MCU/ginput_lld_mouse_board_olimex_stm32_lcd.h
+++ b/boards/addons/ginput/touch/MCU/ginput_lld_mouse_board_olimex_stm32_lcd.h
@@ -1,152 +1,152 @@
-/*

- * This file is subject to the terms of the GFX License. If a copy of

- * the license was not distributed with this file, you can obtain one at:

- *

- *              http://ugfx.org/license.html

- */

-

-/**

- * @file    drivers/ginput/touch/MCU/ginput_lld_mouse_board_olimex_stm32_lcd.h

- * @brief   GINPUT Touch low level driver source for the MCU on the example board.

- *

- * @defgroup Mouse Mouse

- * @ingroup GINPUT

- *

- * @{

- */

-

-#ifndef _GINPUT_LLD_MOUSE_BOARD_H

-#define _GINPUT_LLD_MOUSE_BOARD_H

-

-#define ADC_NUM_CHANNELS   2

-#define ADC_BUF_DEPTH      1

-

-static const ADCConversionGroup adc_y_config = { 

-    FALSE,

-    ADC_NUM_CHANNELS,

-    NULL,

-    NULL,

-    0, 0,    

-    0, 0,    

-    ADC_SQR1_NUM_CH(ADC_NUM_CHANNELS),

-    0,    

-    ADC_SQR3_SQ2_N(ADC_CHANNEL_IN12) | ADC_SQR3_SQ1_N(ADC_CHANNEL_IN13)

-};

-

-static const ADCConversionGroup adc_x_config = { 

-    FALSE,

-    ADC_NUM_CHANNELS,

-    NULL,

-    NULL,

-    0, 0,

-    0, 0,

-    ADC_SQR1_NUM_CH(ADC_NUM_CHANNELS),

-    0,  

-    ADC_SQR3_SQ2_N(ADC_CHANNEL_IN10) | ADC_SQR3_SQ1_N(ADC_CHANNEL_IN11)

-};

-

-/**

- * @brief   Initialise the board for the touch.

- *

- * @notapi

- */

-static inline void init_board(void) {

-	adcStart(&ADCD1, NULL);

-}

-

-/**

- * @brief   Check whether the surface is currently touched

- * @return	TRUE if the surface is currently touched

- *

- * @notapi

- */

-static inline bool_t getpin_pressed(void) {

-    palSetPadMode(GPIOC, 0, PAL_MODE_INPUT_PULLDOWN);

-    palSetPadMode(GPIOC, 1, PAL_MODE_INPUT);

-    palSetPadMode(GPIOC, 2, PAL_MODE_INPUT);

-    palSetPadMode(GPIOC, 3, PAL_MODE_OUTPUT_PUSHPULL);

-    palSetPad(GPIOC, 3);

-	

-	return palReadPad(GPIOC, 0);

-}

-

-/**

- * @brief   Aquire the bus ready for readings

- *

- * @notapi

- */

-static inline void aquire_bus(void) {

-

-}

-

-/**

- * @brief   Release the bus after readings

- *

- * @notapi

- */

-static inline void release_bus(void) {

-

-}

-

-/**

- * @brief   Read an x value from touch controller

- * @return	The value read from the controller

- *

- * @notapi

- */

-static inline uint16_t read_x_value(void) {

-	uint16_t val1, val2;

-    adcsample_t samples[ADC_NUM_CHANNELS * ADC_BUF_DEPTH];

-

-    palSetPadMode(GPIOC, 0, PAL_MODE_INPUT_ANALOG);

-    palSetPadMode(GPIOC, 1, PAL_MODE_INPUT_ANALOG);

-    palSetPadMode(GPIOC, 2, PAL_MODE_OUTPUT_PUSHPULL);

-    palSetPadMode(GPIOC, 3, PAL_MODE_OUTPUT_PUSHPULL);

-    

-	palSetPad(GPIOC, 2);

-    palClearPad(GPIOC, 3); 

-    gfxSleepMilliseconds(1);

-    adcConvert(&ADCD1, &adc_x_config, samples, ADC_BUF_DEPTH);  

-    val1 = ((samples[0] + samples[1])/2);

-    

-	palClearPad(GPIOC, 2);

-    palSetPad(GPIOC, 3);

-    gfxSleepMilliseconds(1);

-    adcConvert(&ADCD1, &adc_x_config, samples, ADC_BUF_DEPTH);

-    val2 = ((samples[0] + samples[1])/2);

-    

-	return ((val1+((1<<12)-val2))/4);

-}

-

-/**

- * @brief   Read an y value from touch controller

- * @return	The value read from the controller

- *

- * @notapi

- */

-static inline uint16_t read_y_value(void) {

-	uint16_t val1, val2;

-    adcsample_t samples[ADC_NUM_CHANNELS * ADC_BUF_DEPTH];

-

-    palSetPadMode(GPIOC, 2, PAL_MODE_INPUT_ANALOG);

-    palSetPadMode(GPIOC, 3, PAL_MODE_INPUT_ANALOG);

-    palSetPadMode(GPIOC, 0, PAL_MODE_OUTPUT_PUSHPULL);

-    palSetPadMode(GPIOC, 1, PAL_MODE_OUTPUT_PUSHPULL);

-

-    palSetPad(GPIOC, 1);

-    palClearPad(GPIOC, 0);

-    gfxSleepMilliseconds(1);

-    adcConvert(&ADCD1, &adc_y_config, samples, ADC_BUF_DEPTH);

-    val1 = ((samples[0] + samples[1])/2);

-

-    palClearPad(GPIOC, 1);

-    palSetPad(GPIOC, 0);

-    gfxSleepMilliseconds(1);

-    adcConvert(&ADCD1, &adc_y_config, samples, ADC_BUF_DEPTH);

-    val2 = ((samples[0] + samples[1])/2);

-    

-	return ((val1+((1<<12)-val2))/4);

-}

-

-#endif /* _GINPUT_LLD_MOUSE_BOARD_H */

-/** @} */

+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://ugfx.org/license.html
+ */
+
+/**
+ * @file    drivers/ginput/touch/MCU/ginput_lld_mouse_board_olimex_stm32_lcd.h
+ * @brief   GINPUT Touch low level driver source for the MCU on the example board.
+ *
+ * @defgroup Mouse Mouse
+ * @ingroup GINPUT
+ *
+ * @{
+ */
+
+#ifndef _GINPUT_LLD_MOUSE_BOARD_H
+#define _GINPUT_LLD_MOUSE_BOARD_H
+
+#define ADC_NUM_CHANNELS   2
+#define ADC_BUF_DEPTH      1
+
+static const ADCConversionGroup adc_y_config = { 
+    FALSE,
+    ADC_NUM_CHANNELS,
+    NULL,
+    NULL,
+    0, 0,    
+    0, 0,    
+    ADC_SQR1_NUM_CH(ADC_NUM_CHANNELS),
+    0,    
+    ADC_SQR3_SQ2_N(ADC_CHANNEL_IN12) | ADC_SQR3_SQ1_N(ADC_CHANNEL_IN13)
+};
+
+static const ADCConversionGroup adc_x_config = { 
+    FALSE,
+    ADC_NUM_CHANNELS,
+    NULL,
+    NULL,
+    0, 0,
+    0, 0,
+    ADC_SQR1_NUM_CH(ADC_NUM_CHANNELS),
+    0,  
+    ADC_SQR3_SQ2_N(ADC_CHANNEL_IN10) | ADC_SQR3_SQ1_N(ADC_CHANNEL_IN11)
+};
+
+/**
+ * @brief   Initialise the board for the touch.
+ *
+ * @notapi
+ */
+static inline void init_board(void) {
+	adcStart(&ADCD1, NULL);
+}
+
+/**
+ * @brief   Check whether the surface is currently touched
+ * @return	TRUE if the surface is currently touched
+ *
+ * @notapi
+ */
+static inline bool_t getpin_pressed(void) {
+    palSetPadMode(GPIOC, 0, PAL_MODE_INPUT_PULLDOWN);
+    palSetPadMode(GPIOC, 1, PAL_MODE_INPUT);
+    palSetPadMode(GPIOC, 2, PAL_MODE_INPUT);
+    palSetPadMode(GPIOC, 3, PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPad(GPIOC, 3);
+	
+	return palReadPad(GPIOC, 0);
+}
+
+/**
+ * @brief   Aquire the bus ready for readings
+ *
+ * @notapi
+ */
+static inline void aquire_bus(void) {
+
+}
+
+/**
+ * @brief   Release the bus after readings
+ *
+ * @notapi
+ */
+static inline void release_bus(void) {
+
+}
+
+/**
+ * @brief   Read an x value from touch controller
+ * @return	The value read from the controller
+ *
+ * @notapi
+ */
+static inline uint16_t read_x_value(void) {
+	uint16_t val1, val2;
+    adcsample_t samples[ADC_NUM_CHANNELS * ADC_BUF_DEPTH];
+
+    palSetPadMode(GPIOC, 0, PAL_MODE_INPUT_ANALOG);
+    palSetPadMode(GPIOC, 1, PAL_MODE_INPUT_ANALOG);
+    palSetPadMode(GPIOC, 2, PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOC, 3, PAL_MODE_OUTPUT_PUSHPULL);
+    
+	palSetPad(GPIOC, 2);
+    palClearPad(GPIOC, 3); 
+    gfxSleepMilliseconds(1);
+    adcConvert(&ADCD1, &adc_x_config, samples, ADC_BUF_DEPTH);  
+    val1 = ((samples[0] + samples[1])/2);
+    
+	palClearPad(GPIOC, 2);
+    palSetPad(GPIOC, 3);
+    gfxSleepMilliseconds(1);
+    adcConvert(&ADCD1, &adc_x_config, samples, ADC_BUF_DEPTH);
+    val2 = ((samples[0] + samples[1])/2);
+    
+	return ((val1+((1<<12)-val2))/4);
+}
+
+/**
+ * @brief   Read an y value from touch controller
+ * @return	The value read from the controller
+ *
+ * @notapi
+ */
+static inline uint16_t read_y_value(void) {
+	uint16_t val1, val2;
+    adcsample_t samples[ADC_NUM_CHANNELS * ADC_BUF_DEPTH];
+
+    palSetPadMode(GPIOC, 2, PAL_MODE_INPUT_ANALOG);
+    palSetPadMode(GPIOC, 3, PAL_MODE_INPUT_ANALOG);
+    palSetPadMode(GPIOC, 0, PAL_MODE_OUTPUT_PUSHPULL);
+    palSetPadMode(GPIOC, 1, PAL_MODE_OUTPUT_PUSHPULL);
+
+    palSetPad(GPIOC, 1);
+    palClearPad(GPIOC, 0);
+    gfxSleepMilliseconds(1);
+    adcConvert(&ADCD1, &adc_y_config, samples, ADC_BUF_DEPTH);
+    val1 = ((samples[0] + samples[1])/2);
+
+    palClearPad(GPIOC, 1);
+    palSetPad(GPIOC, 0);
+    gfxSleepMilliseconds(1);
+    adcConvert(&ADCD1, &adc_y_config, samples, ADC_BUF_DEPTH);
+    val2 = ((samples[0] + samples[1])/2);
+    
+	return ((val1+((1<<12)-val2))/4);
+}
+
+#endif /* _GINPUT_LLD_MOUSE_BOARD_H */
+/** @} */
diff --git a/drivers/ginput/touch/STMPE811/ginput_lld_mouse_board_embest_dmstf4bb.h b/boards/addons/ginput/touch/STMPE811/ginput_lld_mouse_board_embest_dmstf4bb.h
index 7246378d..a2d38d34 100644
--- a/drivers/ginput/touch/STMPE811/ginput_lld_mouse_board_embest_dmstf4bb.h
+++ b/boards/addons/ginput/touch/STMPE811/ginput_lld_mouse_board_embest_dmstf4bb.h
@@ -4,123 +4,123 @@
  *
  *              http://ugfx.org/license.html
  */
-

-/**

- * @file    drivers/ginput/touch/STMPE811/ginput_lld_mouse_board_embest_dmstf4bb.h

- * @brief   GINPUT Touch low level driver source for the STMPE811 on the Embest DM-STF4BB board.

- *

- * @defgroup Mouse Mouse

- * @ingroup GINPUT

- * @{

- */

-

-#ifndef _GINPUT_LLD_MOUSE_BOARD_H

-#define _GINPUT_LLD_MOUSE_BOARD_H

-

-static const I2CConfig i2ccfg = {

-	OPMODE_I2C,

-	400000,

-	FAST_DUTY_CYCLE_2,

-};

-

-/**

- * @brief   Initialise the board for the touch.

- *

- * @notapi

- */

-static void init_board(void)

-{

-	palSetPadMode(GPIOC, 13, PAL_MODE_INPUT | PAL_STM32_PUDR_FLOATING);			/* TP IRQ */

-	palSetPadMode(GPIOB, 8, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN);	/* SCL */

-	palSetPadMode(GPIOB, 9, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN);	/* SDA */

-

-	i2cStart(&I2CD1, &i2ccfg);

-}

-

-/**

- * @brief   Check whether an interrupt is raised

- * @return	TRUE if there is an interrupt signal present

- *

- * @notapi

- */

-static inline bool_t getpin_irq(void) {

-	return (!(palReadPad(GPIOC, 13)));

-}

-

-/**

- * @brief	Write a value into a certain register

- *

- * @param[in] reg	The register address

- * @param[in] n		The amount of bytes (one or two)

- * @param[in] val	The value

- *

- * @notapi

- */

-static void write_reg(uint8_t reg, uint8_t n, uint16_t val)

-{

-	uint8_t txbuf[3];

-

-	i2cAcquireBus(&I2CD1);

-

-	txbuf[0] = reg;

-

-	if (n == 1) {

-		txbuf[1] = val;

-		i2cMasterTransmitTimeout(&I2CD1, STMPE811_ADDR, txbuf, 2, NULL, 0, MS2ST(STMPE811_TIMEOUT));

-	} else if (n == 2) {

-		txbuf[1] = ((val & 0xFF00) >> 8);

-		txbuf[2] = (val & 0x00FF);

-		i2cMasterTransmitTimeout(&I2CD1, STMPE811_ADDR, txbuf, 3, NULL, 0, MS2ST(STMPE811_TIMEOUT));

-	}

-	

-	i2cReleaseBus(&I2CD1);

-}

- 

-/**

- * @brief	Read the value of a certain register

- *

- * @param[in] reg	The register address

- * @param[in] n		The amount of bytes (one or two)

- *

- * @return Data read from device (one byte or two depending on n param)

- *

- * @notapi

- */

-static uint16_t read_reg(uint8_t reg, uint8_t n)

-{

-	uint8_t txbuf[1], rxbuf[2];

-	uint16_t ret;

-

-	rxbuf[0] = 0;

-	rxbuf[1] = 0;

-

-	i2cAcquireBus(&I2CD1);

-

-	txbuf[0] = reg;

-	i2cMasterTransmitTimeout(&I2CD1, STMPE811_ADDR, txbuf, 1, rxbuf, n, MS2ST(STMPE811_TIMEOUT));

-

-	if (n == 1) {

-		ret = rxbuf[0];

-	} else if (n == 2) {

-		ret = ((rxbuf[0] << 8) | (rxbuf[1] & 0xFF));

-	}

-

-	i2cReleaseBus(&I2CD1);

-

-	return ret;

-}

-

-static void read_reg_n(uint8_t reg, uint8_t n, uint8_t *rxbuf)

-{

-	uint8_t txbuf[1];

-

-	i2cAcquireBus(&I2CD1);

-

-	txbuf[0] = reg;

-	i2cMasterTransmitTimeout(&I2CD1, STMPE811_ADDR, txbuf, 1, rxbuf, n, MS2ST(STMPE811_TIMEOUT));

-

-	i2cReleaseBus(&I2CD1);

-}

-

-#endif /* _GINPUT_LLD_MOUSE_BOARD_H */

-/** @} */

+
+/**
+ * @file    drivers/ginput/touch/STMPE811/ginput_lld_mouse_board_embest_dmstf4bb.h
+ * @brief   GINPUT Touch low level driver source for the STMPE811 on the Embest DM-STF4BB board.
+ *
+ * @defgroup Mouse Mouse
+ * @ingroup GINPUT
+ * @{
+ */
+
+#ifndef _GINPUT_LLD_MOUSE_BOARD_H
+#define _GINPUT_LLD_MOUSE_BOARD_H
+
+static const I2CConfig i2ccfg = {
+	OPMODE_I2C,
+	400000,
+	FAST_DUTY_CYCLE_2,
+};
+
+/**
+ * @brief   Initialise the board for the touch.
+ *
+ * @notapi
+ */
+static void init_board(void)
+{
+	palSetPadMode(GPIOC, 13, PAL_MODE_INPUT | PAL_STM32_PUDR_FLOATING);			/* TP IRQ */
+	palSetPadMode(GPIOB, 8, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN);	/* SCL */
+	palSetPadMode(GPIOB, 9, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN);	/* SDA */
+
+	i2cStart(&I2CD1, &i2ccfg);
+}
+
+/**
+ * @brief   Check whether an interrupt is raised
+ * @return	TRUE if there is an interrupt signal present
+ *
+ * @notapi
+ */
+static inline bool_t getpin_irq(void) {
+	return (!(palReadPad(GPIOC, 13)));
+}
+
+/**
+ * @brief	Write a value into a certain register
+ *
+ * @param[in] reg	The register address
+ * @param[in] n		The amount of bytes (one or two)
+ * @param[in] val	The value
+ *
+ * @notapi
+ */
+static void write_reg(uint8_t reg, uint8_t n, uint16_t val)
+{
+	uint8_t txbuf[3];
+
+	i2cAcquireBus(&I2CD1);
+
+	txbuf[0] = reg;
+
+	if (n == 1) {
+		txbuf[1] = val;
+		i2cMasterTransmitTimeout(&I2CD1, STMPE811_ADDR, txbuf, 2, NULL, 0, MS2ST(STMPE811_TIMEOUT));
+	} else if (n == 2) {
+		txbuf[1] = ((val & 0xFF00) >> 8);
+		txbuf[2] = (val & 0x00FF);
+		i2cMasterTransmitTimeout(&I2CD1, STMPE811_ADDR, txbuf, 3, NULL, 0, MS2ST(STMPE811_TIMEOUT));
+	}
+	
+	i2cReleaseBus(&I2CD1);
+}
+ 
+/**
+ * @brief	Read the value of a certain register
+ *
+ * @param[in] reg	The register address
+ * @param[in] n		The amount of bytes (one or two)
+ *
+ * @return Data read from device (one byte or two depending on n param)
+ *
+ * @notapi
+ */
+static uint16_t read_reg(uint8_t reg, uint8_t n)
+{
+	uint8_t txbuf[1], rxbuf[2];
+	uint16_t ret;
+
+	rxbuf[0] = 0;
+	rxbuf[1] = 0;
+
+	i2cAcquireBus(&I2CD1);
+
+	txbuf[0] = reg;
+	i2cMasterTransmitTimeout(&I2CD1, STMPE811_ADDR, txbuf, 1, rxbuf, n, MS2ST(STMPE811_TIMEOUT));
+
+	if (n == 1) {
+		ret = rxbuf[0];
+	} else if (n == 2) {
+		ret = ((rxbuf[0] << 8) | (rxbuf[1] & 0xFF));
+	}
+
+	i2cReleaseBus(&I2CD1);
+
+	return ret;
+}
+
+static void read_reg_n(uint8_t reg, uint8_t n, uint8_t *rxbuf)
+{
+	uint8_t txbuf[1];
+
+	i2cAcquireBus(&I2CD1);
+
+	txbuf[0] = reg;
+	i2cMasterTransmitTimeout(&I2CD1, STMPE811_ADDR, txbuf, 1, rxbuf, n, MS2ST(STMPE811_TIMEOUT));
+
+	i2cReleaseBus(&I2CD1);
+}
+
+#endif /* _GINPUT_LLD_MOUSE_BOARD_H */
+/** @} */
diff --git a/drivers/tdisp/HD44780/tdisp_lld_board_olimex_e407.h b/boards/addons/tdisp/HD44780/tdisp_lld_board_olimex_e407.h
index 7eda4e38..12407356 100644
--- a/drivers/tdisp/HD44780/tdisp_lld_board_olimex_e407.h
+++ b/boards/addons/tdisp/HD44780/tdisp_lld_board_olimex_e407.h
@@ -1,59 +1,59 @@
-/*

- * This file is subject to the terms of the GFX License. If a copy of

- * the license was not distributed with this file, you can obtain one at:

- *

- *              http://ugfx.org/license.html

- */

-

-/**

- * @file    drivers/tdisp/HD44780/tdisp_lld_board_olimex_e407.h

- * @brief   TDISP driver subsystem board interface for the HD44780 display

- *

- * @addtogroup TDISP

- * @{

- */

-

-#ifndef _TDISP_LLD_BOARD_H

-#define _TDISP_LLD_BOARD_H

-

-/* Configure these to match the hardware connections on your board */

-#define BUS_4BITS	FALSE

-#define PORT_DATA	GPIOG

-#define PORT_CTRL	GPIOE

-#define PIN_RS		0

-#define PIN_RW		1

-#define PIN_EN		2

-

-static void init_board(void) {

-	palSetGroupMode(PORT_CTRL, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL);

-	palSetGroupMode(PORT_DATA, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL);

-	palClearPad(PORT_CTRL, PIN_RW);

-}

-

-static void writeToLCD(uint8_t data) {

-	palWritePort(PORT_DATA, data);

-	palSetPad(PORT_CTRL, PIN_EN);

-	gfxSleepMicroseconds(1);

-	palClearPad(PORT_CTRL, PIN_EN);

-	gfxSleepMicroseconds(5);

-}

-

-static void write_cmd(uint8_t data) {

-	palClearPad(PORT_CTRL, PIN_RS);

-	#if BUS_4BITS

-		writeToLCD(data>>4);

-	#endif

-	writeToLCD(data);

-}

-

-static void write_data(uint8_t data) {

-	palSetPad(PORT_CTRL, PIN_RS);

-	#if BUS_4BITS

-		writeToLCD(data>>4);

-	#endif

-	writeToLCD(data);

-}

-

-#endif /* _TDISP_LLD_BOARD_H */

-/** @} */

-

+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://ugfx.org/license.html
+ */
+
+/**
+ * @file    drivers/tdisp/HD44780/tdisp_lld_board_olimex_e407.h
+ * @brief   TDISP driver subsystem board interface for the HD44780 display
+ *
+ * @addtogroup TDISP
+ * @{
+ */
+
+#ifndef _TDISP_LLD_BOARD_H
+#define _TDISP_LLD_BOARD_H
+
+/* Configure these to match the hardware connections on your board */
+#define BUS_4BITS	FALSE
+#define PORT_DATA	GPIOG
+#define PORT_CTRL	GPIOE
+#define PIN_RS		0
+#define PIN_RW		1
+#define PIN_EN		2
+
+static void init_board(void) {
+	palSetGroupMode(PORT_CTRL, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL);
+	palSetGroupMode(PORT_DATA, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL);
+	palClearPad(PORT_CTRL, PIN_RW);
+}
+
+static void writeToLCD(uint8_t data) {
+	palWritePort(PORT_DATA, data);
+	palSetPad(PORT_CTRL, PIN_EN);
+	gfxSleepMicroseconds(1);
+	palClearPad(PORT_CTRL, PIN_EN);
+	gfxSleepMicroseconds(5);
+}
+
+static void write_cmd(uint8_t data) {
+	palClearPad(PORT_CTRL, PIN_RS);
+	#if BUS_4BITS
+		writeToLCD(data>>4);
+	#endif
+	writeToLCD(data);
+}
+
+static void write_data(uint8_t data) {
+	palSetPad(PORT_CTRL, PIN_RS);
+	#if BUS_4BITS
+		writeToLCD(data>>4);
+	#endif
+	writeToLCD(data);
+}
+
+#endif /* _TDISP_LLD_BOARD_H */
+/** @} */
+
diff --git a/drivers/tdisp/HD44780/tdisp_lld_board_st_stm32f4_discovery.h b/boards/addons/tdisp/HD44780/tdisp_lld_board_st_stm32f4_discovery.h
index e9a7ae33..43e161f1 100644
--- a/drivers/tdisp/HD44780/tdisp_lld_board_st_stm32f4_discovery.h
+++ b/boards/addons/tdisp/HD44780/tdisp_lld_board_st_stm32f4_discovery.h
@@ -1,122 +1,122 @@
-/*

- * This file is subject to the terms of the GFX License. If a copy of

- * the license was not distributed with this file, you can obtain one at:

- *

- *              http://ugfx.org/license.html

- */

-

-/**

- * @file    drivers/tdisp/HD44780/tdisp_lld_board_st_stm32f4_discovery.h

- * @brief   TDISP driver subsystem board interface for the HD44780 display

- *

- * @addtogroup TDISP

- * @{

- */

-

-#ifndef _TDISP_LLD_BOARD_H

-#define _TDISP_LLD_BOARD_H

-

-/* Configure these to match the hardware connections on your board */

-#define BUS_4BITS	TRUE

-

-/* Configure the bitoffset in the dataport so they match with the

- * hardware pins. An offset of 0 means bit0 stays at bit0 of the dataport.

- * If the offset is set to 3, bit0 of the nibble will be positioned at

- * P[A..G]3 of the hardware-port.

- */

-#define hardware_offset	3

-

-/* The port where the data is sent to. In the

- * low-leveldriver het hardware_offset is taken

- * into account. If for example the hardware_offset

- * is set to 3, then de data will be sent to

- * PE3, PE4, PE5 en PE6, if the dataport where GPIOE.

- */

-#define PORT_DATA	GPIOE

-

-/* The port used to controle the controle lines of

- * the display.

- */

-#define PORT_CTRL	GPIOD

-/* Pin to controle the R/S-line of the display */

-#define PIN_RS		0

-/* Pin to controle the EN-line of the display */

-#define PIN_EN		1

-/* Pin to controle the R/W-pin of the display.

- * If reading of the display is not used disable

- * reading in the gfxconf.h and put a dummy value here

- * as it will not be used.

- */

-#define PIN_RW		7

-

-

-static void init_board(void) {

-	/* Initialize the ports for data and controle-lines */

-	palSetGroupMode(PORT_CTRL, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL);

-	palSetGroupMode(PORT_DATA, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL);

-	/* Set alle controle pins to low */

-	palClearPad(PORT_CTRL, PIN_RS);

-	palClearPad(PORT_CTRL, PIN_EN);

-	#if TDISP_NEED_READ

-	  palClearPad(PORT_CTRL, PIN_RW);

-	#endif

-}

-

-/* This is the low-level routine for sending the bits

- * to the LCD-display. This routine shifts

- * the bits so they match the hardware port.

- */

-static void writeToLCD(uint8_t data) {

-	palWritePort(PORT_DATA, data<<hardware_offset);

-	palSetPad(PORT_CTRL, PIN_EN);

-	gfxSleepMicroseconds(1);

-	palClearPad(PORT_CTRL, PIN_EN);

-	/* wait a little while so that de display can process the data */

-	gfxSleepMicroseconds(5);

-}

-

-/* Writes a command to the display. The

- * RS-line is pulled low and than the

- * data is send.

- */

-static void write_cmd(uint8_t data) {

-	palClearPad(PORT_CTRL, PIN_RS);

-	#if BUS_4BITS

-		/* first send the high-nibble */

-		writeToLCD(data>>4);

-	#endif

-	/* send the low-nibble */

-	#if BUS_4BITS

-		/* in 4-bit mode the high-nibble is zeroed out */

-		writeToLCD(data & 0x0F);

-	#else

-		writeToLCD(data);

-	#endif

-}

-

-// static void write_initcmd(uint8_t data) {

-//   write_cmd(data);

-// }

-

-/* Write data to the display. The

- * RS-line is pulled high and than the

- * data is send.

- */

-static void write_data(uint8_t data) {

-	palSetPad(PORT_CTRL, PIN_RS);

-	#if BUS_4BITS

-		/* first send the high-nibble */

-		writeToLCD(data>>4);

-	#endif

-	/* send the low-nibble */

-	#if BUS_4BITS

-		/* in 4-bit mode the high-nibble is zeroed out */

-		writeToLCD(data & 0x0F);

-	#else

-		writeToLCD(data);

-	#endif

-}

-

-#endif /* _TDISP_LLD_BOARD_H */

-/** @} */

-

+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://ugfx.org/license.html
+ */
+
+/**
+ * @file    drivers/tdisp/HD44780/tdisp_lld_board_st_stm32f4_discovery.h
+ * @brief   TDISP driver subsystem board interface for the HD44780 display
+ *
+ * @addtogroup TDISP
+ * @{
+ */
+
+#ifndef _TDISP_LLD_BOARD_H
+#define _TDISP_LLD_BOARD_H
+
+/* Configure these to match the hardware connections on your board */
+#define BUS_4BITS	TRUE
+
+/* Configure the bitoffset in the dataport so they match with the
+ * hardware pins. An offset of 0 means bit0 stays at bit0 of the dataport.
+ * If the offset is set to 3, bit0 of the nibble will be positioned at
+ * P[A..G]3 of the hardware-port.
+ */
+#define hardware_offset	3
+
+/* The port where the data is sent to. In the
+ * low-leveldriver het hardware_offset is taken
+ * into account. If for example the hardware_offset
+ * is set to 3, then de data will be sent to
+ * PE3, PE4, PE5 en PE6, if the dataport where GPIOE.
+ */
+#define PORT_DATA	GPIOE
+
+/* The port used to controle the controle lines of
+ * the display.
+ */
+#define PORT_CTRL	GPIOD
+/* Pin to controle the R/S-line of the display */
+#define PIN_RS		0
+/* Pin to controle the EN-line of the display */
+#define PIN_EN		1
+/* Pin to controle the R/W-pin of the display.
+ * If reading of the display is not used disable
+ * reading in the gfxconf.h and put a dummy value here
+ * as it will not be used.
+ */
+#define PIN_RW		7
+
+
+static void init_board(void) {
+	/* Initialize the ports for data and controle-lines */
+	palSetGroupMode(PORT_CTRL, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL);
+	palSetGroupMode(PORT_DATA, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL);
+	/* Set alle controle pins to low */
+	palClearPad(PORT_CTRL, PIN_RS);
+	palClearPad(PORT_CTRL, PIN_EN);
+	#if TDISP_NEED_READ
+	  palClearPad(PORT_CTRL, PIN_RW);
+	#endif
+}
+
+/* This is the low-level routine for sending the bits
+ * to the LCD-display. This routine shifts
+ * the bits so they match the hardware port.
+ */
+static void writeToLCD(uint8_t data) {
+	palWritePort(PORT_DATA, data<<hardware_offset);
+	palSetPad(PORT_CTRL, PIN_EN);
+	gfxSleepMicroseconds(1);
+	palClearPad(PORT_CTRL, PIN_EN);
+	/* wait a little while so that de display can process the data */
+	gfxSleepMicroseconds(5);
+}
+
+/* Writes a command to the display. The
+ * RS-line is pulled low and than the
+ * data is send.
+ */
+static void write_cmd(uint8_t data) {
+	palClearPad(PORT_CTRL, PIN_RS);
+	#if BUS_4BITS
+		/* first send the high-nibble */
+		writeToLCD(data>>4);
+	#endif
+	/* send the low-nibble */
+	#if BUS_4BITS
+		/* in 4-bit mode the high-nibble is zeroed out */
+		writeToLCD(data & 0x0F);
+	#else
+		writeToLCD(data);
+	#endif
+}
+
+// static void write_initcmd(uint8_t data) {
+//   write_cmd(data);
+// }
+
+/* Write data to the display. The
+ * RS-line is pulled high and than the
+ * data is send.
+ */
+static void write_data(uint8_t data) {
+	palSetPad(PORT_CTRL, PIN_RS);
+	#if BUS_4BITS
+		/* first send the high-nibble */
+		writeToLCD(data>>4);
+	#endif
+	/* send the low-nibble */
+	#if BUS_4BITS
+		/* in 4-bit mode the high-nibble is zeroed out */
+		writeToLCD(data & 0x0F);
+	#else
+		writeToLCD(data);
+	#endif
+}
+
+#endif /* _TDISP_LLD_BOARD_H */
+/** @} */
+
diff --git a/drivers/gdisp/ILI9341/board_ILI9341_mikromedia.h b/drivers/gdisp/ILI9341/board_ILI9341_mikromedia.h
deleted file mode 100644
index a0eed13b..00000000
--- a/drivers/gdisp/ILI9341/board_ILI9341_mikromedia.h
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- *              http://ugfx.org/license.html
- */
-
-/**
- * @file    drivers/gdisp/ILI9341/board_ILI9341_mikromedia.h
- * @brief   GDISP Graphics Driver subsystem low level driver source for the ILI9341 display.
- */
-
-#ifndef _GDISP_LLD_BOARD_H
-#define _GDISP_LLD_BOARD_H
-
-// For a multiple display configuration we would put all this in a structure and then
-//	set g->board to that structure.
-#define SET_CS    palSetPad(GPIOE, GPIOE_LCD_CS);
-#define CLR_CS    palClearPad(GPIOE, GPIOE_LCD_CS);
-#define SET_RS    palSetPad(GPIOE, GPIOE_LCD_RS);
-#define CLR_RS    palClearPad(GPIOE, GPIOE_LCD_RS);
-#define SET_WR    palSetPad(GPIOE, GPIOE_PMWR);
-#define CLR_WR    palClearPad(GPIOE, GPIOE_PMWR);
-#define SET_RD    palSetPad(GPIOE, GPIOE_PMRD);
-#define CLR_RD    palClearPad(GPIOE, GPIOE_PMRD);
-
-static inline void init_board(GDisplay *g) {
-
-	// As we are not using multiple displays we set g->board to NULL as we don't use it.
-	g->board = 0;
-
-	switch(g->controllerdisplay) {
-	case 0:											// Set up for Display 0
-		/* Configure the pins to a well know state */
-		SET_RS;
-		SET_RD;
-		SET_WR;
-		CLR_CS;
-
-		/* Hardware reset */
-		palSetPad(GPIOE, GPIOE_LCD_RST);
-		chThdSleepMilliseconds(100);
-		palClearPad(GPIOE, GPIOE_LCD_RST);
-		chThdSleepMilliseconds(100);
-		palSetPad(GPIOE, GPIOE_LCD_RST);
-		chThdSleepMilliseconds(100);
-		break;
-	}
-}
-
-static inline void post_init_board(GDisplay *g) {
-	(void) g;
-}
-
-static inline void setpin_reset(GDisplay *g, bool_t state) {
-	(void) g;
-	if(state) {
-		// reset lcd
-		palClearPad(GPIOE, GPIOE_LCD_RST);
-	} else {
-		palSetPad(GPIOE, GPIOE_LCD_RST);
-	}
-}
-
-static inline void set_backlight(GDisplay *g, uint8_t percent) {
-	(void) g;
-	// TODO: can probably pwm this
-	if(percent) {
-		// turn back light on
-		palSetPad(GPIOE, GPIOE_LCD_BLED);
-	} else {
-		// turn off
-		palClearPad(GPIOE, GPIOE_LCD_BLED);
-	}
-}
-
-static inline void acquire_bus(GDisplay *g) {
-	(void) g;
-}
-
-static inline void release_bus(GDisplay *g) {
-	(void) g;
-}
-
-/**
- * @brief   Short delay
- *
- * @param[in] dly		Length of delay
- *
- * @notapi
- */
-static inline void ili9341_delay(uint16_t dly) {
-  static uint16_t i;
-  for(i = 0; i < dly; i++)
-    asm("nop");
-}
-
-static inline void write_index(GDisplay *g, uint16_t index) {
-	(void) g;
-	palWriteGroup(GPIOE, 0x00FF, 0, index);
-	CLR_RS; CLR_WR; ili9341_delay(1); SET_WR; ili9341_delay(1); SET_RS;
-}
-
-static inline void write_data(GDisplay *g, uint16_t data) {
-	(void) g;
-	palWriteGroup(GPIOE, 0x00FF, 0, data);
-	CLR_WR; ili9341_delay(1); SET_WR; ili9341_delay(1);
-}
-
-static inline void setreadmode(GDisplay *g) {
-	(void) g;
-	// change pin mode to digital input
-	palSetGroupMode(GPIOE, PAL_WHOLE_PORT, 0, PAL_MODE_INPUT);
-}
-
-static inline void setwritemode(GDisplay *g) {
-	(void) g;
-	// change pin mode back to digital output
-	palSetGroupMode(GPIOE, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL);
-}
-
-static inline uint16_t read_data(GDisplay *g) {
-	CLR_RD;
-	value = palReadPort(GPIOE);
-	value = palReadPort(GPIOE);
-	SET_RD;
-	return value;
-}
-
-#endif /* _GDISP_LLD_BOARD_H */
diff --git a/drivers/ginput/touch/MCU/ginput_lld_mouse.c b/drivers/ginput/touch/MCU/ginput_lld_mouse.c
index 1bb7cd50..a64bf6cb 100644
--- a/drivers/ginput/touch/MCU/ginput_lld_mouse.c
+++ b/drivers/ginput/touch/MCU/ginput_lld_mouse.c
@@ -21,15 +21,7 @@
 

 #include "ginput/lld/mouse.h"

 

-#if defined(GINPUT_MOUSE_USE_CUSTOM_BOARD) && GINPUT_MOUSE_USE_CUSTOM_BOARD

-	#include "ginput_lld_mouse_board.h"

-#elif defined(BOARD_OLIMEX_STM32_LCD)

-	#include "ginput_lld_mouse_board_olimex_stm32_lcd.h"

-#elif defined(BOARD_OLIMEX_PIC32MX_LCD)

-	#include "ginput_lld_mouse_board_olimex_pic32mx_lcd.h"

-#else

-	#include "ginput_lld_mouse_board.h"

-#endif

+#include "ginput_lld_mouse_board.h"

 

 static uint16_t sampleBuf[7];

 static coord_t	lastx, lasty;

diff --git a/drivers/tdisp/HD44780/tdisp_lld.c b/drivers/tdisp/HD44780/tdisp_lld.c
index 2232955c..7b731c34 100644
--- a/drivers/tdisp/HD44780/tdisp_lld.c
+++ b/drivers/tdisp/HD44780/tdisp_lld.c
@@ -17,15 +17,7 @@
 
 #if GFX_USE_TDISP /*|| defined(__DOXYGEN__)*/
 
-/* check first if the user has defined his/her own lowlevel-board file */
-#if defined(TDISP_USE_CUSTOM_BOARD) && TDISP_USE_CUSTOM_BOARD
-	/* Include the user supplied board definitions */
-	#include "tdisp_lld_board.h"
-#elif defined(BOARD_OLIMEX_STM32_E407)
-	#include "tdisp_lld_board_olimex_e407.h"
-#elif defined(BOARD_ST_STM32F4_DISCOVERY)
-	#include "tdisp_lld_board_example.h"
-#endif
+#include "tdisp_lld_board.h"
 
 /* Controller Specific Properties */
 #define CUSTOM_CHAR_COUNT		8