diff options
author | Joel Bodenmann <joel@seriouslyembedded.com> | 2016-02-10 23:28:50 +0100 |
---|---|---|
committer | Joel Bodenmann <joel@seriouslyembedded.com> | 2016-02-10 23:29:08 +0100 |
commit | f28e9d9eef51776b7ed9dfe573d39776c7336049 (patch) | |
tree | 1696d2709d19fac94c52d1ff90eb05125fbe13ea /boards/addons/gdisp/board_SSD1306_spi.h | |
parent | a1ab0a67ba1ce10394e83cc7057e629c4192d798 (diff) | |
download | uGFX-f28e9d9eef51776b7ed9dfe573d39776c7336049.tar.gz uGFX-f28e9d9eef51776b7ed9dfe573d39776c7336049.tar.bz2 uGFX-f28e9d9eef51776b7ed9dfe573d39776c7336049.zip |
New sample board file (replacing some misleading existing ones)
Diffstat (limited to 'boards/addons/gdisp/board_SSD1306_spi.h')
-rw-r--r-- | boards/addons/gdisp/board_SSD1306_spi.h | 136 |
1 files changed, 0 insertions, 136 deletions
diff --git a/boards/addons/gdisp/board_SSD1306_spi.h b/boards/addons/gdisp/board_SSD1306_spi.h deleted file mode 100644 index f7b1ac6d..00000000 --- a/boards/addons/gdisp/board_SSD1306_spi.h +++ /dev/null @@ -1,136 +0,0 @@ -/* - * This file is subject to the terms of the GFX License. If a copy of - * the license was not distributed with this file, you can obtain one at: - * - * http://ugfx.org/license.html - */ - -/** - * @file boards/addons/gdisp/board_SSD1306_spi.h - * @brief GDISP Graphic Driver subsystem board interface for the SSD1306 display. - * - * @note This file contains a mix of hardware specific and operating system specific - * code. You will need to change it for your CPU and/or operating system. - */ - -#ifndef _GDISP_LLD_BOARD_H -#define _GDISP_LLD_BOARD_H - -// The command byte to put on the front of each page line -#define SSD1306_PAGE_PREFIX 0x40 // Co = 0, D/C = 1 - -// For a multiple display configuration we would put all this in a structure and then -// set g->board to that structure. -#define SSD1306_RESET_PORT GPIOB -#define SSD1306_RESET_PIN 5 -#define SSD1306_MISO_PORT GPIOB -#define SSD1306_MISO_PIN 8 -#define SSD1306_MOSI_PORT GPIOB -#define SSD1306_MOSI_PIN 7 -#define SSD1306_SCK_PORT GPIOB -#define SSD1306_SCK_PIN 6 -#define SSD1306_CS_PORT GPIOB -#define SSD1306_CS_PIN 5 -#define SET_RST palSetPad(SSD1306_RESET_PORT, SSD1306_RESET_PIN); -#define CLR_RST palClearPad(SSD1306_RESET_PORT, SSD1306_RESET_PIN); - -/* - * SPI1 configuration structure. - * Speed 42MHz, CPHA=0, CPOL=0, 8bits frames, MSb transmitted first. - * The slave select line is the pin 4 on the port GPIOA. - */ -static const SPIConfig spi1config = { - 0, - /* HW dependent part.*/ - SSD1306_MISO_PORT, - SSD1306_MISO_PIN, - 0 - //SPI_CR1_BR_0 -}; - -#if GFX_USE_OS_CHIBIOS - static int32_t thdPriority = 0; -#endif - -static GFXINLINE void init_board(GDisplay *g) { - unsigned i; - - // As we are not using multiple displays we set g->board to NULL as we don't use it. - g->board = 0; - - - switch(g->controllerdisplay) { - case 0: // Set up for Display 0 - // RESET pin. - palSetPadMode(SSD1306_RESET_PORT, SSD1306_RESET_PIN, PAL_MODE_OUTPUT_PUSHPULL); - - palSetPadMode(SSD1306_MISO_PORT, SSD1306_MISO_PIN, PAL_MODE_ALTERNATE(1)| - PAL_STM32_OSPEED_HIGHEST); - palSetPadMode(SSD1306_MOSI_PORT, SSD1306_MOSI_PIN, PAL_MODE_ALTERNATE(1)| - PAL_STM32_OSPEED_HIGHEST); - palSetPadMode(SSD1306_SCK_PORT, SSD1306_SCK_PIN, PAL_MODE_ALTERNATE(1)| - PAL_STM32_OSPEED_HIGHEST); - palSetPad(SSD1306_CS_PORT, SSD1306_CS_PIN); - palSetPadMode(SSD1306_CS_PORT, SSD1306_CS_PIN, PAL_MODE_ALTERNATE(1)| - PAL_STM32_OSPEED_HIGHEST); - spiInit(); - break; - } -} - -static GFXINLINE void post_init_board(GDisplay *g) { - (void) g; -} - -static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) { - (void) g; - if(state) - CLR_RST - else - SET_RST -} - -static GFXINLINE void acquire_bus(GDisplay *g) { - (void) g; - #if GFX_USE_OS_CHIBIOS - thdPriority = (int32_t)chThdGetPriority(); - chThdSetPriority(HIGHPRIO); - #endif - spiAcquireBus(&SPID1); -} - -static GFXINLINE void release_bus(GDisplay *g) { - (void) g; - #if GFX_USE_OS_CHIBIOS - chThdSetPriority(thdPriority); - #endif - spiReleaseBus(&SPID1); -} - -static GFXINLINE void write_cmd(GDisplay *g, uint8_t cmd) { - uint8_t command[2]; - (void) g; - - command[0] = 0x00; // Co = 0, D/C = 0 - command[1] = cmd; - - spiStart(&SPID1, &spi1config); - spiSelect(&SPID1); - spiStartSend(&SPID1, 2, command); - spiUnselect(&SPID1); - spiStop(&SPID1); -} - -static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) { - (void) g; - - spiStart(&SPID1, &spi1config); - spiSelect(&SPID1); - spiStartSend(&SPID1, length, data); - spiUnselect(&SPID1); - spiStop(&SPID1); -} - - -#endif /* _GDISP_LLD_BOARD_H */ - |