Removed the doxygen inside of every driver as doxygen is only meant for highlevel API documentation.

Documenting the drivers interface should be done inside a template driver or the gdisp LLD abstraction.

1 files changed, 1 insertions, 91 deletions

diff --git a/drivers/gdisp/ED060SC4/board_ED060SC4_template.h b/drivers/gdisp/ED060SC4/board_ED060SC4_template.h
index 6d71a986..69683cd0 100644
--- a/drivers/gdisp/ED060SC4/board_ED060SC4_template.h
+++ b/drivers/gdisp/ED060SC4/board_ED060SC4_template.h
@@ -5,18 +5,10 @@
  *              http://ugfx.org/license.html
  */
 
-/**
- * @file    drivers/gdisp/ST7565/board_ST7565_template.h
- * @brief   GDISP Graphic Driver subsystem board interface for the ST7565 display.
- *
- * @addtogroup GDISP
- * @{
- */
-
 #ifndef _GDISP_LLD_BOARD_H
 #define _GDISP_LLD_BOARD_H
 
-/**
+/*
  * @brief	Optional parameters that can be put in this file.
  * @note	The values listed below are the defaults.
  *
@@ -54,149 +46,67 @@
  *			#define EINK_WRITECOUNT			4
  */
 
-/**
- * @brief   Initialise the board for the display.
- *
- * @param[in] g			The GDisplay structure
- *
- * @note	Set the g->board member to whatever is appropriate. For multiple
- * 			displays this might be a pointer to the appropriate register set.
- *
- * @notapi
- */
 static inline void init_board(GDisplay *g) {
 	(void) g;
 }
 
-/**
- * @brief	Delay for display waveforms. Should be an accurate microsecond delay.
- *
- * @param[in] us		The number of microseconds
- */
 static void eink_delay(int us) {
 	(void) us;
 }
 
-/**
- * @brief	Turn the E-ink panel Vdd supply (+3.3V) on or off.
- *
- * @param[in] g			The GDisplay structure
- * @param[in] on		On or off
- */
 static inline void setpower_vdd(GDisplay *g, bool_t on) {
 	(void) g;
 	(void) on;
 }
 
-/**
- * @brief	Turn the E-ink panel negative supplies (-15V, -20V) on or off.
- *
- * @param[in] g			The GDisplay structure
- * @param[in] on		On or off
- */
 static inline void setpower_vneg(GDisplay *g, bool_t on) {
 	(void) g;
 	(void) on;
 }
 
-/**
- * @brief	Turn the E-ink panel positive supplies (-15V, -20V) on or off.
- *
- * @param[in] g			The GDisplay structure
- * @param[in] on		On or off
- */
 static inline void setpower_vpos(GDisplay *g, bool_t on) {
 	(void) g;
 	(void) on;
 }
 
-/**
- * @brief	Set the state of the LE (source driver Latch Enable) pin.
- *
- * @param[in] g			The GDisplay structure
- * @param[in] on		On or off
- */
 static inline void setpin_le(GDisplay *g, bool_t on) {
 	(void) g;
 	(void) on;
 }
 
-/**
- * @brief	Set the state of the OE (source driver Output Enable) pin.
- *
- * @param[in] g			The GDisplay structure
- * @param[in] on		On or off
- */
 static inline void setpin_oe(GDisplay *g, bool_t on) {
 	(void) g;
 	(void) on;
 }
 
-/**
- * @brief	Set the state of the CL (source driver Clock) pin.
- *
- * @param[in] g			The GDisplay structure
- * @param[in] on		On or off
- */
 static inline void setpin_cl(GDisplay *g, bool_t on) {
 	(void) g;
 	(void) on;
 }
 
-/**
- * @brief	Set the state of the SPH (source driver Start Pulse Horizontal) pin.
- *
- * @param[in] g			The GDisplay structure
- * @param[in] on		On or off
- */
 static inline void setpin_sph(GDisplay *g, bool_t on) {
 	(void) g;
 	(void) on;
 }
 
-/**
- * @brief	Set the state of the D0-D7 (source driver Data) pins.
- *
- * @param[in] g			The GDisplay structure
- * @param[in] value		The byte to write
- */
 static inline void setpins_data(GDisplay *g, uint8_t value) {
 	(void) g;
 	(void) value;
 }
 
-/**
- * @brief	Set the state of the CKV (gate driver Clock Vertical) pin.
- *
- * @param[in] g			The GDisplay structure
- * @param[in] on		On or off
- */
 static inline void setpin_ckv(GDisplay *g, bool_t on) {
 	(void) g;
 	(void) on;
 }
 
-/**
- * @brief	Set the state of the GMODE (gate driver Gate Mode) pin.
- *
- * @param[in] g			The GDisplay structure
- * @param[in] on		On or off
- */
 static inline void setpin_gmode(GDisplay *g, bool_t on) {
 	(void) g;
 	(void) on;
 }
 
-/**
- * @brief	Set the state of the SPV (gate driver Start Pulse Vertical) pin.
- *
- * @param[in] g			The GDisplay structure
- * @param[in] on		On or off
- */
 static inline void setpin_spv(GDisplay *g, bool_t on) {
 	(void) g;
 	(void) on;
 }
 
 #endif /* _GDISP_LLD_BOARD_H */
-/** @} */