Convert ED060SC4 to new driver format

1 files changed, 202 insertions, 0 deletions

diff --git a/drivers/gdisp/ED060SC4/board_ED060SC4_template.h b/drivers/gdisp/ED060SC4/board_ED060SC4_template.h
new file mode 100644
index 00000000..6d71a986
--- /dev/null
+++ b/drivers/gdisp/ED060SC4/board_ED060SC4_template.h
@@ -0,0 +1,202 @@
+/*
+ * This file is subject to the terms of the GFX License. If a copy of
+ * the license was not distributed with this file, you can obtain one at:
+ *
+ *              http://ugfx.org/license.html
+ */
+
+/**
+ * @file    drivers/gdisp/ST7565/board_ST7565_template.h
+ * @brief   GDISP Graphic Driver subsystem board interface for the ST7565 display.
+ *
+ * @addtogroup GDISP
+ * @{
+ */
+
+#ifndef _GDISP_LLD_BOARD_H
+#define _GDISP_LLD_BOARD_H
+
+/**
+ * @brief	Optional parameters that can be put in this file.
+ * @note	The values listed below are the defaults.
+ *
+ * @note	#define GDISP_SCREEN_HEIGHT		600
+ * @note	#define GDISP_SCREEN_WIDTH		800
+ *
+ * @note	Number of pixels per byte<br>
+ * 			#define EINK_PPB				4
+ *
+ * @note	Delay for generating clock pulses.
+ *			Unit is approximate clock cycles of the CPU (0 to 15).
+ *			This should be atleast 50 ns.<br>
+ *			#define EINK_CLOCKDELAY			0
+ *
+ * @note	Width of one framebuffer block.
+ *			Must be divisible by EINK_PPB and evenly divide GDISP_SCREEN_WIDTH.<br>
+ *			#define EINK_BLOCKWIDTH			20
+ *
+ * @note
+ * @note	Height of one framebuffer block.
+ *			Must evenly divide GDISP_SCREEN_WIDTH.<br>
+ *			#define EINK_BLOCKHEIGHT		20
+ *
+ * @note	Number of block buffers to use for framebuffer emulation.<br>
+ * 			#define EINK_NUMBUFFERS			40
+ *
+ * @note	Do a "blinking" clear, i.e. clear to opposite polarity first.
+ *			This reduces the image persistence.<br>
+ *			#define EINK_BLINKCLEAR			TRUE
+ *
+ * @note	Number of passes to use when clearing the display<br>
+ *			#define EINK_CLEARCOUNT			10
+ *
+ * @note	Number of passes to use when writing to the display<br>
+ *			#define EINK_WRITECOUNT			4
+ */
+
+/**
+ * @brief   Initialise the board for the display.
+ *
+ * @param[in] g			The GDisplay structure
+ *
+ * @note	Set the g->board member to whatever is appropriate. For multiple
+ * 			displays this might be a pointer to the appropriate register set.
+ *
+ * @notapi
+ */
+static inline void init_board(GDisplay *g) {
+	(void) g;
+}
+
+/**
+ * @brief	Delay for display waveforms. Should be an accurate microsecond delay.
+ *
+ * @param[in] us		The number of microseconds
+ */
+static void eink_delay(int us) {
+	(void) us;
+}
+
+/**
+ * @brief	Turn the E-ink panel Vdd supply (+3.3V) on or off.
+ *
+ * @param[in] g			The GDisplay structure
+ * @param[in] on		On or off
+ */
+static inline void setpower_vdd(GDisplay *g, bool_t on) {
+	(void) g;
+	(void) on;
+}
+
+/**
+ * @brief	Turn the E-ink panel negative supplies (-15V, -20V) on or off.
+ *
+ * @param[in] g			The GDisplay structure
+ * @param[in] on		On or off
+ */
+static inline void setpower_vneg(GDisplay *g, bool_t on) {
+	(void) g;
+	(void) on;
+}
+
+/**
+ * @brief	Turn the E-ink panel positive supplies (-15V, -20V) on or off.
+ *
+ * @param[in] g			The GDisplay structure
+ * @param[in] on		On or off
+ */
+static inline void setpower_vpos(GDisplay *g, bool_t on) {
+	(void) g;
+	(void) on;
+}
+
+/**
+ * @brief	Set the state of the LE (source driver Latch Enable) pin.
+ *
+ * @param[in] g			The GDisplay structure
+ * @param[in] on		On or off
+ */
+static inline void setpin_le(GDisplay *g, bool_t on) {
+	(void) g;
+	(void) on;
+}
+
+/**
+ * @brief	Set the state of the OE (source driver Output Enable) pin.
+ *
+ * @param[in] g			The GDisplay structure
+ * @param[in] on		On or off
+ */
+static inline void setpin_oe(GDisplay *g, bool_t on) {
+	(void) g;
+	(void) on;
+}
+
+/**
+ * @brief	Set the state of the CL (source driver Clock) pin.
+ *
+ * @param[in] g			The GDisplay structure
+ * @param[in] on		On or off
+ */
+static inline void setpin_cl(GDisplay *g, bool_t on) {
+	(void) g;
+	(void) on;
+}
+
+/**
+ * @brief	Set the state of the SPH (source driver Start Pulse Horizontal) pin.
+ *
+ * @param[in] g			The GDisplay structure
+ * @param[in] on		On or off
+ */
+static inline void setpin_sph(GDisplay *g, bool_t on) {
+	(void) g;
+	(void) on;
+}
+
+/**
+ * @brief	Set the state of the D0-D7 (source driver Data) pins.
+ *
+ * @param[in] g			The GDisplay structure
+ * @param[in] value		The byte to write
+ */
+static inline void setpins_data(GDisplay *g, uint8_t value) {
+	(void) g;
+	(void) value;
+}
+
+/**
+ * @brief	Set the state of the CKV (gate driver Clock Vertical) pin.
+ *
+ * @param[in] g			The GDisplay structure
+ * @param[in] on		On or off
+ */
+static inline void setpin_ckv(GDisplay *g, bool_t on) {
+	(void) g;
+	(void) on;
+}
+
+/**
+ * @brief	Set the state of the GMODE (gate driver Gate Mode) pin.
+ *
+ * @param[in] g			The GDisplay structure
+ * @param[in] on		On or off
+ */
+static inline void setpin_gmode(GDisplay *g, bool_t on) {
+	(void) g;
+	(void) on;
+}
+
+/**
+ * @brief	Set the state of the SPV (gate driver Start Pulse Vertical) pin.
+ *
+ * @param[in] g			The GDisplay structure
+ * @param[in] on		On or off
+ */
+static inline void setpin_spv(GDisplay *g, bool_t on) {
+	(void) g;
+	(void) on;
+}
+
+#endif /* _GDISP_LLD_BOARD_H */
+/** @} */