Added HX8347D driver by the user Eddie

1 files changed, 495 insertions, 0 deletions

diff --git a/drivers/gdisp/HX8347D/gdisp_lld.c b/drivers/gdisp/HX8347D/gdisp_lld.c
new file mode 100644
index 00000000..8443ca3d
--- /dev/null
+++ b/drivers/gdisp/HX8347D/gdisp_lld.c
@@ -0,0 +1,495 @@
+/*

+ * This file is subject to the terms of the GFX License, v1.0. If a copy of

+ * the license was not distributed with this file, you can obtain one at:

+ *

+ *              http://chibios-gfx.com/license.html

+ */

+

+/**

+ * @file    drivers/gdisp/HX8347D/gdisp_lld.c

+ * @brief   GDISP Graphics Driver subsystem low level driver source for the HX8347D display.

+ *

+ * @addtogroup GDISP

+ * @{

+ */

+

+#include "ch.h"

+#include "hal.h"

+#include "gfx.h"

+

+#include "HX8347D.h"

+

+#if GFX_USE_GDISP /*|| defined(__DOXYGEN__)*/

+

+/* Include the emulation code for things we don't support */

+#include "gdisp/lld/emulation.c"

+

+/*===========================================================================*/

+/* Driver local definitions.                                                 */

+/*===========================================================================*/

+

+#ifndef GDISP_SCREEN_HEIGHT

+	#define GDISP_SCREEN_HEIGHT		320

+#endif

+#ifndef GDISP_SCREEN_WIDTH

+	#define GDISP_SCREEN_WIDTH		240

+#endif

+

+#define GDISP_INITIAL_CONTRAST	50

+#define GDISP_INITIAL_BACKLIGHT	50

+

+/*===========================================================================*/

+/* Driver local functions.                                                   */

+/*===========================================================================*/

+

+#if defined(GDISP_USE_CUSTOM_BOARD) && GDISP_USE_CUSTOM_BOARD

+	/* Include the user supplied board definitions */

+	#include "gdisp_lld_board.h"

+#elif defined(BOARD_ST_STM32F4_DISCOVERY)

+	#include "gdisp_lld_board_st_stm32f4_discovery.h"

+#else

+	/* Include the user supplied board definitions */

+	#include "gdisp_lld_board.h"

+#endif

+

+// Some common routines and macros

+#define write_reg(reg, data)		{ write_index(reg); write_data(data); }

+#define write_ram(color1, color2)   { write_index(0x22); write_ram8(color1,color2); }

+#define stream_start()				{ write_index(0x22); spiStart(&SPID1, &spi1cfg2);      }

+#define stream_stop()               {while(((SPI1->SR & SPI_SR_TXE) == 0) || ((SPI1->SR & SPI_SR_BSY) != 0));palSetPad(GPIOA, 4);spiStart(&SPID1, &spi1cfg1); }

+#define delay(us)					chThdSleepMicroseconds(us)

+#define delayms(ms)					chThdSleepMilliseconds(ms)

+

+static inline void set_cursor(coord_t x, coord_t y) {

+			write_reg(HX8347D_REG_SCL, (uint8_t) x);

+		    write_reg(HX8347D_REG_SCH, (uint8_t) (x >> 8));

+		    write_reg(HX8347D_REG_SPL, (uint8_t) y);

+		    write_reg(HX8347D_REG_SPH, (uint8_t) (y >> 8));

+}

+

+static void set_viewport(coord_t x, coord_t y, coord_t cx, coord_t cy) {

+		    write_reg(HX8347D_REG_SCL, (uint8_t) x);

+		    write_reg(HX8347D_REG_SCH, (uint8_t) (x >> 8));

+		    write_reg(HX8347D_REG_ECL, (uint8_t) (x + cx -1));

+		    write_reg(HX8347D_REG_ECH, (uint8_t) ((x + cx -1) >> 8));

+		    write_reg(HX8347D_REG_SPL, (uint8_t) y);

+		    write_reg(HX8347D_REG_SPH, (uint8_t) (y >> 8));

+		    write_reg(HX8347D_REG_EPL, (uint8_t) (y + cy -1));

+		    write_reg(HX8347D_REG_EPH, (uint8_t) ((y + cy -1) >> 8));

+}

+

+static inline void reset_viewport(void) {

+	set_viewport(0, 0, GDISP.Width, GDISP.Height);

+}

+

+/*===========================================================================*/

+/* Driver interrupt handlers.                                                */

+/*===========================================================================*/

+

+/*===========================================================================*/

+/* Driver exported functions.                                                */

+/*===========================================================================*/

+

+/* ---- Required Routines ---- */

+/*

+	The following 2 routines are required.

+	All other routines are optional.

+*/

+

+/**

+ * @brief   Low level GDISP driver initialization.

+ *

+ * @notapi

+ */

+bool_t gdisp_lld_init(void) {

+	/* Initialise your display */

+	init_board();

+

+	// Hardware reset

+	setpin_reset(TRUE);

+	delayms(1);

+	setpin_reset(FALSE);

+	delayms(5);

+

+	// Get the bus for the following initialisation commands

+	acquire_bus();

+

+	/* Start Initial Sequence ----------------------------------------------------*/

+	write_reg(HX8347D_REG_STBAH, 0x00);                 /* Reset Power Control 1                */

+	write_reg(HX8347D_REG_STBAL, 0x20);                 /* Power Control 2                      */

+	write_reg(HX8347D_REG_PTBAH, 0x0C);                 /* Power Control 1                      */

+	write_reg(HX8347D_REG_PTBAL, 0xC4);                 /* Power Control 2                      */

+	write_reg(HX8347D_REG_OPONN, 0x40);                 /* Source OPON_N                        */

+	write_reg(HX8347D_REG_OPONI, 0x38);                 /* Source OPON_I                        */

+	write_reg(HX8347D_REG_DC2, 0xA3);                   /* Display Control 2                    */

+

+	/* Power On sequence ---------------------------------------------------------*/

+	write_reg(HX8347D_REG_PWC2, 0x1B);                  /* Power Control 2                      */

+	write_reg(HX8347D_REG_PWC1, 0x01);                  /* Power Control 1                      */

+	write_reg(HX8347D_REG_VMH, 0x2F);                   /* Vcom Control 2                       */

+	write_reg(HX8347D_REG_VML, 0x57);                   /* Vcom Control 3                       */

+	write_reg(HX8347D_REG_VMF, 0x8D);                   /* Vcom Control 1                       */

+

+	/* Gamma settings  -----------------------------------------------------------*/

+	write_reg(HX8347D_REG_VRP0,0x01);   //   default setup

+	write_reg(HX8347D_REG_VRP1,0x0e);   //

+	write_reg(HX8347D_REG_VRP2,0x11);   //

+	write_reg(HX8347D_REG_VRP3,0x1a);   //

+	write_reg(HX8347D_REG_VRP4,0x18);   //

+	write_reg(HX8347D_REG_VRP5,0x24);   //

+	write_reg(HX8347D_REG_PRP0,0x15);   //

+	write_reg(HX8347D_REG_PRP1,0x65);   //

+	write_reg(HX8347D_REG_PKP0,0x0b);   //

+	write_reg(HX8347D_REG_PKP1,0x18);   //

+	write_reg(HX8347D_REG_PKP2,0x19);   //

+	write_reg(HX8347D_REG_PKP3,0x1a);   //

+	write_reg(HX8347D_REG_PKP4,0x18);   //

+	write_reg(HX8347D_REG_VRN0,0x1b);   //

+	write_reg(HX8347D_REG_VRN1,0x27);   //

+	write_reg(HX8347D_REG_VRN2,0x25);   //

+	write_reg(HX8347D_REG_VRN3,0x2e);   //

+	write_reg(HX8347D_REG_VRN4,0x31);   //

+	write_reg(HX8347D_REG_VRN5,0x3e);   //

+	write_reg(HX8347D_REG_PRN0,0x1a);   //

+	write_reg(HX8347D_REG_PRN1,0x6a);   //

+	write_reg(HX8347D_REG_PKN0,0x07);   //

+	write_reg(HX8347D_REG_PKN1,0x05);   //

+	write_reg(HX8347D_REG_PKN2,0x06);   //

+	write_reg(HX8347D_REG_PKN3,0x0b);   //

+	write_reg(HX8347D_REG_PKN4,0x14);   //

+	write_reg(HX8347D_REG_CGM,0xcc);    //

+

+	/* Power + Osc ---------------------------------------------------------------*/

+	write_reg(HX8347D_REG_OSCCH, 0x36);                  /* OSC Control 1                        */

+	write_reg(HX8347D_REG_OSCCL, 0x01);                  /* OSC Control 2                        */

+	write_reg(HX8347D_REG_DMODE, 0x00);                  /* Display Mode Control                 */

+	write_reg(HX8347D_REG_PWC6, 0x88);                   /* Power Control 6                      */

+	delayms(5);                                          /* Delay 5 ms                           */

+	write_reg(HX8347D_REG_PWC6, 0x80);                   /* Power Control 6                      */

+	delayms(5);                                          /* Delay 5 ms                           */

+	write_reg(HX8347D_REG_PWC6, 0x90);                   /* Power Control 6                      */

+	delayms(5);                                          /* Delay 5 ms                           */

+	write_reg(HX8347D_REG_PWC6, 0xD0);                   /* Power Control 6                      */

+	delayms(5);                                          /* Delay 5 ms                           */

+	write_reg(HX8347D_REG_COLMOD, 0x05);                 /* Colmod 16Bit/Pixel                   */

+	write_reg(HX8347D_REG_PCH, 0x00);                    /* Panel Characteristic                 */

+	write_reg(HX8347D_REG_DC3, 0x38);                    /* Display Control 3                    */

+	delayms(40);

+	write_reg(HX8347D_REG_DC3, 0x3C);                    /* Display Control 3                    */

+	write_reg(HX8347D_REG_MAC, 0x08);                    /* Memory access control                */

+

+	write_reg(HX8347D_REG_SCL, 0x00);

+	write_reg(HX8347D_REG_SCH, 0x00);

+	write_reg(HX8347D_REG_ECL, 0xef);

+	write_reg(HX8347D_REG_ECH, 0x00);

+	write_reg(HX8347D_REG_SPL, 0x00);

+	write_reg(HX8347D_REG_SPH, 0x00);

+	write_reg(HX8347D_REG_EPL, 0x3f);

+	write_reg(HX8347D_REG_EPH, 0x01);

+

+ 	// Release the bus

+	release_bus();

+

+	/* Turn on the backlight */

+	set_backlight(GDISP_INITIAL_BACKLIGHT);

+

+   /* Initialise the GDISP structure */

+	GDISP.Width = GDISP_SCREEN_WIDTH;

+	GDISP.Height = GDISP_SCREEN_HEIGHT;

+	GDISP.Orientation = GDISP_ROTATE_0;

+	GDISP.Powermode = powerOn;

+	GDISP.Backlight = GDISP_INITIAL_BACKLIGHT;

+	GDISP.Contrast = GDISP_INITIAL_CONTRAST;

+	#if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP

+		GDISP.clipx0 = 0;

+		GDISP.clipy0 = 0;

+		GDISP.clipx1 = GDISP.Width;

+		GDISP.clipy1 = GDISP.Height;

+	#endif

+	return TRUE;

+}

+

+/**

+ * @brief   Draws a pixel on the display.

+ *

+ * @param[in] x        X location of the pixel

+ * @param[in] y        Y location of the pixel

+ * @param[in] color    The color of the pixel

+ *

+ * @notapi

+ */

+void gdisp_lld_draw_pixel(coord_t x, coord_t y, color_t color) {

+	#if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP

+		if (x < GDISP.clipx0 || y < GDISP.clipy0 || x >= GDISP.clipx1 || y >= GDISP.clipy1) return;

+	#endif

+	

+	acquire_bus();

+	set_cursor(x, y);

+	write_ram((color >> 8) & 0xFF, color & 0xFF);

+	release_bus();

+}

+

+/* ---- Optional Routines ---- */

+/*

+	All the below routines are optional.

+	Defining them will increase speed but everything

+	will work if they are not defined.

+	If you are not using a routine - turn it off using

+	the appropriate GDISP_HARDWARE_XXXX macro.

+	Don't bother coding for obvious similar routines if

+	there is no performance penalty as the emulation software

+	makes a good job of using similar routines.

+		eg. If gfillarea() is defined there is little

+			point in defining clear() unless the

+			performance bonus is significant.

+	For good performance it is suggested to implement

+		fillarea() and blitarea().

+*/

+

+#if GDISP_HARDWARE_CLEARS || defined(__DOXYGEN__)

+	/**

+	 * @brief   Clear the display.

+	 * @note    Optional - The high level driver can emulate using software.

+	 *

+	 * @param[in] color    The color of the pixel

+	 *

+	 * @notapi

+	 */

+	void gdisp_lld_clear(color_t color) {

+		unsigned i;

+

+		acquire_bus();

+		reset_viewport();

+		stream_start();

+		for(i = 0; i < GDISP_SCREEN_WIDTH * GDISP_SCREEN_HEIGHT; i++)

+		  write_ram16(color);

+		stream_stop();

+		release_bus();

+	}

+#endif

+

+#if GDISP_HARDWARE_FILLS || defined(__DOXYGEN__)

+	/**

+	 * @brief   Fill an area with a color.

+	 * @note    Optional - The high level driver can emulate using software.

+	 *

+	 * @param[in] x, y     The start filled area

+	 * @param[in] cx, cy   The width and height to be filled

+	 * @param[in] color    The color of the fill

+	 *

+	 * @notapi

+	 */

+	void gdisp_lld_fill_area(coord_t x, coord_t y, coord_t cx, coord_t cy, color_t color) {

+		unsigned i, area;

+

+		#if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP

+			if (x < GDISP.clipx0) { cx -= GDISP.clipx0 - x; x = GDISP.clipx0; }

+			if (y < GDISP.clipy0) { cy -= GDISP.clipy0 - y; y = GDISP.clipy0; }

+			if (cx <= 0 || cy <= 0 || x >= GDISP.clipx1 || y >= GDISP.clipy1) return;

+			if (x+cx > GDISP.clipx1)	cx = GDISP.clipx1 - x;

+			if (y+cy > GDISP.clipy1)	cy = GDISP.clipy1 - y;

+		#endif

+

+		area = cx*cy;

+

+		acquire_bus();

+		set_viewport(x, y, cx, cy);

+		stream_start();

+		for(i = 0; i < area; i++)

+		  write_ram16(color);

+		stream_stop();

+		release_bus();

+	}

+#endif

+

+#if GDISP_HARDWARE_BITFILLS || defined(__DOXYGEN__)

+	/**

+	 * @brief   Fill an area with a bitmap.

+	 * @note    Optional - The high level driver can emulate using software.

+	 *

+	 * @param[in] x, y     The start filled area

+	 * @param[in] cx, cy   The width and height to be filled

+	 * @param[in] srcx, srcy   The bitmap position to start the fill from

+	 * @param[in] srccx    The width of a line in the bitmap.

+	 * @param[in] buffer   The pixels to use to fill the area.

+	 *

+	 * @notapi

+	 */

+	void gdisp_lld_blit_area_ex(coord_t x, coord_t y, coord_t cx, coord_t cy, coord_t srcx, coord_t srcy, coord_t srccx, const pixel_t *buffer) {

+		coord_t endx, endy;

+		unsigned lg;

+

+		#if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP

+			if (x < GDISP.clipx0) { cx -= GDISP.clipx0 - x; srcx += GDISP.clipx0 - x; x = GDISP.clipx0; }

+			if (y < GDISP.clipy0) { cy -= GDISP.clipy0 - y; srcy += GDISP.clipy0 - y; y = GDISP.clipy0; }

+			if (srcx+cx > srccx)		cx = srccx - srcx;

+			if (cx <= 0 || cy <= 0 || x >= GDISP.clipx1 || y >= GDISP.clipy1) return;

+			if (x+cx > GDISP.clipx1)	cx = GDISP.clipx1 - x;

+			if (y+cy > GDISP.clipy1)	cy = GDISP.clipy1 - y;

+		#endif

+

+		acquire_bus();

+		set_viewport(x, y, cx, cy);

+		stream_start();

+

+		endx = srcx + cx;

+		endy = y + cy;

+		lg = srccx - cx;

+		buffer += srcx + srcy * srccx;

+		for(; y < endy; y++, buffer += lg)

+			for(x=srcx; x < endx; x++)

+				write_data(*buffer++);

+		stream_stop();

+		release_bus();

+	}

+#endif

+

+#if (GDISP_NEED_PIXELREAD && GDISP_HARDWARE_PIXELREAD) || defined(__DOXYGEN__)

+	/**

+	 * @brief   Get the color of a particular pixel.

+	 * @note    Optional.

+	 * @note    If x,y is off the screen, the result is undefined.

+	 *

+	 * @param[in] x, y     The pixel to be read

+	 *

+	 * @notapi

+	 */

+	color_t gdisp_lld_get_pixel_color(coord_t x, coord_t y) {

+		color_t color;

+

+		#if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP

+			if (x < 0 || x >= GDISP.Width || y < 0 || y >= GDISP.Height) return 0;

+		#endif

+}

+#endif

+

+#if (GDISP_NEED_SCROLL && GDISP_HARDWARE_SCROLL) || defined(__DOXYGEN__)

+	/**

+	 * @brief   Scroll vertically a section of the screen.

+	 * @note    Optional.

+	 * @note    If x,y + cx,cy is off the screen, the result is undefined.

+	 * @note    If lines is >= cy, it is equivelent to a area fill with bgcolor.

+	 *

+	 * @param[in] x, y     The start of the area to be scrolled

+	 * @param[in] cx, cy   The size of the area to be scrolled

+	 * @param[in] lines    The number of lines to scroll (Can be positive or negative)

+	 * @param[in] bgcolor  The color to fill the newly exposed area.

+	 *

+	 * @notapi

+	 */

+	void gdisp_lld_vertical_scroll(coord_t x, coord_t y, coord_t cx, coord_t cy, int lines, color_t bgcolor) {

+		static color_t buf[((GDISP_SCREEN_HEIGHT > GDISP_SCREEN_WIDTH ) ? GDISP_SCREEN_HEIGHT : GDISP_SCREEN_WIDTH)];

+		coord_t row0, row1;

+		unsigned i, abslines, j;

+		static int gap;

+

+		#if GDISP_NEED_VALIDATION || GDISP_NEED_CLIP

+			if (x < GDISP.clipx0) { cx -= GDISP.clipx0 - x; x = GDISP.clipx0; }

+			if (y < GDISP.clipy0) { cy -= GDISP.clipy0 - y; y = GDISP.clipy0; }

+			if (!lines || cx <= 0 || cy <= 0 || x >= GDISP.clipx1 || y >= GDISP.clipy1) return;

+			if (x+cx > GDISP.clipx1)	cx = GDISP.clipx1 - x;

+			if (y+cy > GDISP.clipy1)	cy = GDISP.clipy1 - y;

+		#endif

+

+	}

+#endif

+

+#if (GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL) || defined(__DOXYGEN__)

+	/**

+	 * @brief	Driver Control

+	 * @details	Unsupported control codes are ignored.

+	 * @note	The value parameter should always be typecast to (void *).

+	 * @note	There are some predefined and some specific to the low level driver.

+	 * @note	GDISP_CONTROL_POWER			- Takes a gdisp_powermode_t

+	 * 			GDISP_CONTROL_ORIENTATION	- Takes a gdisp_orientation_t

+	 * 			GDISP_CONTROL_BACKLIGHT		- Takes an int from 0 to 100. For a driver

+	 * 											that only supports off/on anything other

+	 * 											than zero is on.

+	 *

+	 * @param[in] what		What to do.

+	 * @param[in] value		The value to use (always cast to a void *).

+	 *

+	 * @notapi

+	 */

+	void gdisp_lld_control(unsigned what, void *value) {

+		switch(what) {

+			case GDISP_CONTROL_ORIENTATION:

+				if (GDISP.Orientation == (gdisp_orientation_t)value)

+					return;

+				switch((gdisp_orientation_t)value) {

+					case GDISP_ROTATE_0:

+						acquire_bus();

+						write_reg(HX8347D_REG_MAC, 0x08);                    /* Memory access control */

+		                write_reg(HX8347D_REG_ECL, 0xef);

+		                write_reg(HX8347D_REG_ECH, 0x00);

+		                write_reg(HX8347D_REG_EPL, 0x3f);

+		                write_reg(HX8347D_REG_EPH, 0x01);

+						release_bus();

+						GDISP.Height = GDISP_SCREEN_HEIGHT;

+						GDISP.Width = GDISP_SCREEN_WIDTH;

+						break;

+

+					case GDISP_ROTATE_90:

+						acquire_bus();

+						write_reg(HX8347D_REG_MAC, 0x68);                    /* Memory access control */

+                        write_reg(HX8347D_REG_ECL, 0x3f);

+                        write_reg(HX8347D_REG_ECH, 0x01);

+                        write_reg(HX8347D_REG_EPL, 0xef);

+                        write_reg(HX8347D_REG_EPH, 0x00);

+						release_bus();

+						GDISP.Height = GDISP_SCREEN_WIDTH;

+						GDISP.Width = GDISP_SCREEN_HEIGHT;

+						break;

+

+					case GDISP_ROTATE_180:

+						acquire_bus();

+						write_reg(HX8347D_REG_MAC, 0xc8);                    /* Memory access control */

+		                write_reg(HX8347D_REG_ECL, 0xef);

+		                write_reg(HX8347D_REG_ECH, 0x00);

+		                write_reg(HX8347D_REG_EPL, 0x3f);

+		                write_reg(HX8347D_REG_EPH, 0x01);

+						release_bus();

+						GDISP.Height = GDISP_SCREEN_HEIGHT;

+						GDISP.Width = GDISP_SCREEN_WIDTH;

+						break;

+

+					case GDISP_ROTATE_270:

+						acquire_bus();

+						write_reg(HX8347D_REG_MAC, 0xa8);                    /* Memory access control */

+                        write_reg(HX8347D_REG_ECL, 0x3f);

+                        write_reg(HX8347D_REG_ECH, 0x01);

+                        write_reg(HX8347D_REG_EPL, 0xef);

+                        write_reg(HX8347D_REG_EPH, 0x00);

+						release_bus();

+                        GDISP.Height = GDISP_SCREEN_WIDTH;

+                        GDISP.Width = GDISP_SCREEN_HEIGHT;

+						break;

+

+					default:

+						return;

+				}

+

+				#if GDISP_NEED_CLIP || GDISP_NEED_VALIDATION

+				GDISP.clipx0 = 0;

+				GDISP.clipy0 = 0;

+				GDISP.clipx1 = GDISP.Width;

+				GDISP.clipy1 = GDISP.Height;

+				#endif

+				GDISP.Orientation = (gdisp_orientation_t)value;

+				return;

+

+			case GDISP_CONTROL_BACKLIGHT:

+				if ((unsigned)value > 100)

+					value = (void *)100;

+				set_backlight((unsigned)value);

+				GDISP.Backlight = (unsigned)value;

+				return;

+

+			default:

+				return;

+		}

+	}

+#endif

+

+#endif /* GFX_USE_GDISP */

+/** @} */